iPoint.exe found no disc, insert the disc

Similar Questions

• Try to install settlers 3 gold edition. I get a message "the settlers edition Gold 3 CD not found.» Please insert the CD and try again. »

  Original title: settlers 3 troubleshooting

  I had the settlers 3 gold edition installed on windows 7 Home premium 32-bit. After having extracted the files now, I try to run the game by autorun icon, a new window opens with options 'install new/edit' and a few others, but everything by clicking on one of the icons I get the same error of "settlers edition Gold 3 cd not found.» Please insert the cd and try again. »
  Please guide me how to solve the problem if you have any solution for this.

  Thank you

  Hi Bulech,

  Settlers 3 gold edition is not listed in the Windows 7 Compatibility Web site. It may or may not be compatible. Take a look. Clickhere .

  However, you can follow these steps and check if it helps to solve the problem for you.

  Step 1:

  I suggest, instead of just click on icons, you right click on the .exe file and run as administrator.

  Step 2:

  If it is little help, you can run settlers 3 gold edition in Windows Vista compatibility mode .

  Step 3:

  Alternatively, you can run the game in compatibility problems solving

  To run the troubleshooting program compatibility Troubleshooter

  a. open the resolution of the problems of compatibility of programs by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  b. follow the directions contained in the resolution of the problems.

  Aziz Nadeem - Microsoft

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error when starting my computer code: there is no disc in the drive. Please insert the floppy disk in drive\Device\Harddisk3\DR3

  I just started getting this error in the last month.  It only happens when I start my computer.  I started to use Windows Live Mail Beta.  Would this have something to do with it?

  The problem was with Windows Live Sync.  Once I have not won, I didn't the message again.

  I'm fairly certain that this has nothing to do with Windows Live Mail beta - but it does not sound like a startup program any want a disc in the drive and that is what causes the problem.

  To boot from the hard drive, first of all, in the boot sequence, you may need to change the BIOS to hard drive first in the boot sequence (it is not always necessary and I have my system set to start first on the CD player and have no problem - but you have problems so we'll see if that fixes the).  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  While there, make sure that there is no setting to boot the disk hard regardless of the boot sequence.  Reset.  Normally, it should start without the error message.

  If this does not work, what is the EXACT (including all codes verbatim) error message?  It refers to a specific file, and if yes, what is the file name?  Are you able to start despite the message or that you need to insert the CD in the drive and then it allows you to start?

  Try to boot into safe mode without any CD in the drive (repeatedly clicking the F8 key during the boot process until the menu appears) and see if it works or if you have the same problem.  If you can start in safe mode, it's a good sign.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  If this does not work, go to start / search area and type msconfig.exe and enter, and double-click on the program icon that appears.  Go to the Startup tab and remove all checks, click OK, close the program and reboot and see if the problem persists.  If this isn't the case, then the problem is caused by something trying to boot at startup, and you may need to add the items back one by one, restarting after each one, until you find the culprit at the origin of the problem.  Then let this disabled element, double-check all the others that you actually want from startup, click OK, close the program and restart.  The problem should be solved.  If it's not working, then go back and re-check items that have been checked, click OK, and save the program and restart.  You'll be back to where you started, but we will have eliminated a very likely cause.

  That's all for now.  I hope this helps.  If the problem persists, I need more information about this message and all the files that he mentions.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I downloaded CS4 Design Premium and asks me to insert the disc 1, but there is no disk 1... Help!

  I bought Adobe Design Premium CS4 and the disc has been destroyed, so I found the download on Adobe and downloaded. Then, instead of just run the file I downloaded, I extracted and burned it to DVD. When I ran the Setup and pick out what I wanted to install and he said: ' "Please insert the Adobe CS4 Design Premium 1 diskette in drive G:\ to continue the installation.".

  I have a serial number valid because I connected my Adobe and obtained from my account.

  I just need to name the DVD a number so that it works, or what I need to download the file again and just run it from the massive file, I download?

  I come to find the 2 original files I have downloaded and run the extraction auto app and it extracted all for Adobe CS4 Premium\Adobe CS4\Design and when I run Setup.exe, it worked fine. :-{)

  Thank you for all the time by reading this post and thanks kglad, but I thought about it on my own.

• Qosmio G40-108 - prevent recovery of product disc ask to insert the disc

  I have a Qosmio G40-108 and it works fine even if the disc is not read discs any longer, perhaps because of a motherboard failure that I replace the disk with a new of brans and it still does not work, but my problem is the following... I have the product recovery disc, I tried to copy it to a USB key and reinstall the OS from USB and the start of software loading a page with the logo Toshiba asking to insert the recovery disk into drive F: I can't use is more like it's broken. How can I prevent the disc from asking to insert the disk into drive F:? There are lines on the laptop recovery disk to install the USB without using the disc?

  I managed to install a generic Windows Vista 32 bit downloaded from a Web site and my serial key works with it, but I really want to reinstall the original software
  P.S. Recovery of product is for Windows Vista Ultimate 32-bit and just in case there is also a serial number of the disk GMR400766ENG

  I don't have any experience with this, but I found an interesting article on creating recovery USB - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

  Maybe you'll be able to create the USB stick recovery. Check it out.

• Satellite P100 locks after inserting the DVD + RW disc

  My P100 crashes after inserting the dvd + rw disc.
  If I turn on the computer with the floppy disk in the drive (in general), it works.
  I use the wrong type of dvd.
  Can you advise?

  Hello

  There are many different models of Satellite P100, and I think that the units were delivered with different drives.
  But if the laptop came with DL reader so it should also could handle the DVD + RW.

  Does happen with different DVD + RW from different manufacturers?
  I think that in the manual you will find a list with tested and compatible media that you can use.
  This list, I found in the user manual on my satellite.

• iPoint.exe - disc no.

  iPoint.exe - disc no. \device\Harddisk3\DR3.

  The solution is quite easy as long as you're happy hacking the registry. Under the specific \Software\Microsoft\Intellipoint\App (sorry - don't remember if it's under HKCU or HKLM).

  It's under HKCU

• What should I do now? I have a boot failure of the disk (insert system disk). I inserted the disc and it says:

  Compaq sr5127cl vista 32 bit boot disk failure, insert system disk

  I inserted the disc system and got "No drive found" upwards cannot continue

  What should I do now?

  Datsuny wrote: Compaq sr5127cl vista 32 bit boot disk failure, insert system disk I inserted the disc system and got "no drive found" set up will continue what should I do now?

  Hello Datsuny, many times this error means that the hard drive has failed or the operating system on the hard disk is damaged.

  I would tend to think that the hard drive has failed.

• Why do I receive flag showing that I have a problem and insert the disc. but nothing shows

  Why do I get a red flaag showing I have a problem and to insert the blank disc aa, what I do, but the flag persists?

  Hello

  • What disk you insert?
  • What are the instructions?
  • How long have you been faced with the question?
  • Are there changes to the computer?
  • The problem is present in Safe Mode and clean the boot?
   
  I suggest you run the Analysis System File Checker and see if TI the problem still occurs. To do this, please see the following article.
  http://support.Microsoft.com/kb/929833

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• Whenever I have to play the game, I have to insert the disc 2 in my DVD ROM despite installing the game on my hard drive.

  Hello

  Whenever I have to play the game, I have to insert the disc 2 in my DVD ROM despite installing the game on my hard drive.
  Can someone help me with a cure for this (IE run the game without the CD?) I can run Microsoft Flight simulator without inserting the DVD in my DVD-rom.

  original title: query on Microsoft Train Simulator 2001

  I suspect that the game has Digital Rights Management in there (i.e., copy protection) and it checks for you ensure that you physically have the disc so that he knows that you are not a thief.  Many providers of game assumes that you are a thief and you prove that you're not demanding that the disc is in the DVD player when the game takes place.  What I do is to use a program like Alcohol 52%, a free program that can make a copy of a DVD/CD and include in the image copy protection so that you can use a DVD player virtual to mount the image file instead of having the real DVD mounted in a real drive.

• I HAVE INSTALLED THE AIR COMBAT SIMULATOR BUT WHEN I TRY TO RUN IT, IT SAYS INSERT DISC. WHEN I INSERT THE DISC IT USUALLY ALWAYS OPEN

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Jewels38f,

  ·         What happens once you insert the disc (you get no error message)?

  ·         What version of Combat Flight Simulator you try to play?

  ·         What version of Windows is installed on your computer?

  ·         Have you tried the game from the disc itself?

  If you use Windows 7, then follow the suggestions below.

  Visit the link given below to ensure the compatibility of the version of the game.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator

  Do not start the game that is installed on your computer, instead of this insert the disc and let the AutoPlay option to start the game and will give you the opportunity to play.

  Check if this is useful.

  If you are trying to play Combat Flight Simulator 3 you may need to install it even in compatibility mode and check if that helps.

  To install the game in compatibility mode follow the link below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Before installing the game in compatibility mode uninstall the game. To uninstall the game, follow the link below.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I reinstalled windows xp media Center 2005, I get a prompt to insert the disc of windows xp professional service pack 2 CD, I don't have it, what should I do then?

  When I reinstalled windows xp media Center 2005, I invited to insert the disc of windows xp professional service pack 2 CD, I'm not available, what do I do next? If I canceled it, I know that windows installed yet to complete the work. But I'll soon get error and windows do not work properly.

  I am frustrated with Microsoft Corp., why didn't they make things easier for users to enjoy. I noticed all the announced sounds so pleasant during installation.  Everything suddenly it asks for windows professional service pack 2 CD.  where I go to get this information from?

  Can someone help me right now, I am desperately wanted to complete this work. I left my computer hang for hours and hours. waiting for windows xp professional CD disk to copy and install.

  Thanks for your response.

  Luke

  See this link from a previous thread for advice and information.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/is-there-a-way-i-can-still-get-SP2-and-SP3-for/9b917f32-4353-4B7E-BC54-348470f7ff31

• Transfer problem - files Transfer Wizard says "Please insert the disc 1'... If I select OK it tells me the wrong disc is in the pc"

  I did a PC Restore on my Dell, I saved my files on USB 3... now it's time to download them again, the transfer Assistant tells me that "transfer is underway" and files are "fly through the window". But another window appears on the screen telling me "Please insert the disc 1'... If I select OK it tells me that the wrong disk is in the pc... it isn't." The transfer takes an age without a movement minute on the bar "load..." Any suggestions?  Kind regards.

  Did you just copied the files to USB devices or did you use some kind of backup software?

  If the latter, what is the name of the application?

  If the former can, you go to (at least one of) files on the USB key (for example, to open it)?  And what happens if you try to just copy one of the files (and use 'copy' rather than 'move' to ensure that the file on the USB device is not removed).

• Error-insert the disc when try to open the flash drive.

  Original title: why connect my USB drive as an external drive.

  When the flash drive is plugged into the USB port, it seems that it will be added as a flash drive, but then the following equipment added window indicates that an external hard drive has been added.  When I go into windows Explorer to open the drive in Explorer mode, it says to insert the disc.

  Hi JimScottATO,

  We will try this.

  First of all, make sure that you are connected under an administrator account on your computer. Then plug in your USB key.

  Click START then right click on my computer , then click MANAGE

  In the new window, click MANAGEMENT OF DISKS

  Find the name of your flash drive and right click.

  Click on the letter of change of road and railways

  And then change the drive letter to something not already taken by another drive on the computer, such as "x" or "v".