IPS version 7.0.1 and global correlation

Similar Questions

• Global correlation test site

  Hi people,

  I try IPS 7.0.1 and global correlation on one of my small remote offices, but I want to confirm to happen in fact malicious traffic before rolling out to 15 + other sensors.

  I have configured the sensor and used 'see global Stats' and 'motor show in stat analysis' to ensure that I get the latest databases.

  However, as I said it is a small office and (fortunately) there is no malicious traffic to the IPS sensor to drop. I'm kind of in a catch-22 here.

  I was about to set up a test PC to use the remote desktop proxy server (so through its traffic in the IPS sensor) and then try to hit certain known malicious domains. This, of course, runs the risk of infection and is in any way random.

  There are test sites or IP addresses in the Ironport database that I can use to prove that his work (a bit like the EICAR virus test file)

  Something like testGC.ironport.com which goes to a single unused IP address somewhere.

  If this is not the case, can you guys add? It would certainly accelerate our deployment process and may be useful for TAC, also. This could also be used by the filter of the botnet ASA.

  Thank you!!

  Now I understand more what you need.

  It's good for us customer feedback.

  I entered an enhancement request to add a command to test connectivity from the sensors to the overall correlation servers. Thus, it can be considered for a future version of the IPS.

• Global correlation and the Application failed

  Hi, people.

  I have IPS4270-20-K9 with version 3,0000 E4 and signature version 572.

  Sensor health show me a critical problem, with:

  -Application has failed
  -Global correlation

  probe #sh - global statistical correlation

  Error: getGlobalCorrelationStatistics: ct - collaborationApp.459 does not, please check the processes in the system - failed to connect to the specified Io::ClientPipe.

  How to solve these problems?

  TKS.

  This error message indicates that a software process required for the overall correlation function (CollaborationApp) does not (stop / is crushed, hanging, etc.). You'll need to reboot ("reset") the sensor to restore the process to a status of "Running".

  There are several defects in the software version you are running (the 7.0 (3) E4) who are the likely culprits/causes that have been fixed in later versions (E4 7.0 (4) and 7.0(5a) E4). After restarted the sensor and restored service, you can upgrade to a fixed version (7.0(5a) E4).

• Global correlation of IPS

  When I manually update the IPS signatures, will be updated features of global correlation of Cisco IPS?

  But I don't, because I think that with this kind of update, the signature will be updated

  No, when you update the IPS signature, it will update the IPS on the IPS himself signing.

  Global correlation functionality will not be updated. It is an update of the separate database.

• global correlation does not refresh.

  Hi all

  I have a problem to update the overall correlation. I do get updates for signatures in the IPS but see output below about the overall correlation.

  ==========================================

  global correlation statistics
  Participation in the network:
  Counters:
  Total connection attempts = 0
  Total connection failures = 0
  Since the last success = 0 connection failures
  History of connection:
  Updates:
  Status of the last attempt to update = failure
  Time since last successful update = never
  Counters:
  Failures since the last successful update = 8
  Total attempts to update = 8
  Total failure of the update = 8
  Update interval in seconds = 300
  Update server = updated - manifests.ironport.com
  Update server address = 204.15.82.17
  Current versions:
  config = 0
  Drop = 0
  IP = 0
  rule = 0
  Warnings:

  ===========================================

  Material used:

  ASA-ssm-10 (version 7.0 (4) E4)

  ASA - 5520 (version 8.4 (1))

  I see all the traffic from the firewall and routers ISP.

  I hope someone can help me with this question or tips.

  Thanks in advance,

  Erik Verkerk.

  You allowed overall correlation?

  You can check if you do under the part of the license. Without a global correlation license, you will not be able to update.

• Global correlation error

  Hi all

  recently, I have activated global correlation on my IPS-4240. the overall correlation worked very well for several days.

  Suddenly, it's no harder, even if the config is not changed.

  1 - mgt interface can resolve the address.

  2-clock is not synchronized with ntp, but she is set manually on the same as ntp server (internet)

  3-no proxy used.

  I disabled / enabled global config always the same question.

  SH-global statistical correlation

  Participation in the network:

  Counters:

  Total connection attempts = 0

  Total connection failures = 0

  Since the last success = 0 connection failures

  History of connection:

  Updates:

  Status of the last attempt to update = failure

  Time since last successful update = minutes 7392

  Counters:

  Update failures since the last successful = 1478

  Total attempts to update = 3060

  Total failure of the update = 1481

  Update interval in seconds = 300

  Update server = updated - manifests.ironport.com

  Update server address = 204.15.82.17

  Current versions:

  config = 0

  Drop = 0

  IP = 0

  rule = 0

  Please advice.

  If there is no change in network, I suggest you reload the IPS and see if that solves the problem.

  If you want to deepen the question, I would say that you open a case with TAC, then it can be more studied.

• Global correlation not updated.

  I'm having a problem with our IPS modules. Who have updated for a long time, but stopped for some reason any update. He claims that it is connected, but if keep updates.

  Note the following from the IPS Release notes:

  • You need IPS 7.3 (5) to use the automatic update, global correlation and the participation of the network after the migration of the Certificate SHA-2 on Cisco websites.

  There is also a view of land on this issue:

  http://www.Cisco.com/c/en/us/support/docs/field-notices/640/fn64080.html

• Events of global correlation

  I have a 5510 ASA with a module of SSM - 10. I have the overall correlation to market and update. When I look at 'Overall correlation report' from the dashboard I see packages which have been refused by the overall correlation. Can someone tell me how global correlation events are saved? I would like to be able to see the raw data associated with the overall correlation.

  Thank you.

  Hello

  Take a look at this:

  http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/IDM/idm_collaboration.html#wp1065809

  As can be seen, all the times that causes of "overall correlation" no matter what kind of measures to be taken by the IPS it produces an alert if the package is refused by "reputation filtering" which produces any type of alert. In addition, "this feature applies only to the inspection of overall correlation where traffic is allowed if no specific signature is put in correspondence".

  I'm not sure of all these fields on the alert then but I saw at least some of them. If you do not see an alert with these fields, then the overall correlation can be not to see all the instances where he had to change the dimensions of risk and take appropriate measures to him, in other words, you will not receive any kind of malicious hosts such packages in the first place.

  In addition, if you have "reputation filtering", you can turn off to make sure that it is not this problem.

  Rregards,

  Assia

• The Globals and Globals station brought in the sequential model of the file

  Hello

  I create sample files to illustrate the use of the station globals and globals using TestStand 4.2, model batch file.  I was assuming that station overall value would be persistent to the station and file global values are persisted to the file (as long as the file is not deleted, the value will remain).  But, after the executions of couple, I found that I'm wrong.

  He's looking to me that globals file, the value reset for each new execution.  I would like to ask if this is a correct behavior?  If it is correct, I can say that: because each run contains the new instance of the file, so at the beginning again, new copy of the globals file are created.  (I'm borrowing the idea of the model of batch execution logic, but for my example, I use only the sequential model).

  In addition to reading the other posts, for globals station, value is not persistent until a file Save command issued manually.  How to deliver this command?  And, is there a similar command for globals file?

  Thank you.

  Peggy

  Hello

  When teststand is closed the StationGlobals file is updated automatically, you don't have to do anything.

  For FileGlobals, there is a static version, that you create at the time of editing, and there is a version of the runtime. When you change the values during execution, these are not kept when execution is completed. So if you want to maintain values of execution you will also change the static values and also save the file in the sequence.

  There are examples in this forum to do just that.

  Hope this helps

  Concerning

  Ray Farmer

• Variables and global imports

  Hi, I have; m using views on my new project and I was wondering if in actionscript I can do imports coming into the world to my entire application.

  For example.

  I have MyApplication.as that does it:

  import flash.data.SQLConnection;
  import views.Home;
  
  --
  private var home:Home;
  protected var dbConnection:SQLConnection = new SQLConnection;
  var dbFile:File = File.applicationDirectory.resolvePath("assets/mydb.db");
  dbConnection.open(dbFile);
  --
  
  home = new Home();
  addChild(home);
  

  The above code is obviously well separated in all methods and everything, but I just put online so you can see what I am trying to accomplish.

  On my home.as, I would then be able to use my connection (dbConnection) started the MyApplication.as, and I also want to import all the necessary libraries that will use throughout my application. For example. import flash.data.SQLStatement;

  I'm sure I'll have to use several times in different points of view, and if I import it every time, it gets a bit redundant.

  Could someone tell me how to make a variable and an overall import throughout the application? And 'global' the best way to do it?

  Thanks in advance,

  mplacona wrote:
  Could someone tell me how to make a variable and an overall import throughout the application? And 'global' the best way to do it?

  Furthermore, you essentially asked two unrelated things in your post, but you may not have realized given how you thought (possibly) imports worked.

  I addressed the issue of imports, while JRab gave you a way to deal with the other half of your question on access to variables in your application.

  In addition to using a singleton approach, you can count on the fact that your high class (what you call your "home.as", I guess) is instantiated in general only once in the application.  This makes it practically equivalent to a singleton.  (Singleton term is generally used for a class that you can't instantiate more of once, I think, but is probably too (put?-) used for a class that is instantiated only once, as with the main class.)

  If you want to set these variables in your main class, just make variable static.  This makes them directly accessible from any class that can 'see' your main class, which is usually everything within a single package.  Example follows:

  // in main class, e.g. Home.as
  
  public class Home extends Sprite {
      public static var version:String;
  
      // other vars here, maybe non-public or non-static
  
      public function Home() {
          Home.version = '1.2.3'; // store global reference
  
          // initialize app here
      }
  }
  
  ---------------------------
  
  // in some other module, e.g. Model.as
  public class Model {
  
      public function Model() {
          trace('version', Home.version);
      }
  

• The IPS Version update

  We use the ASA 5510 with AIP - SSM 10 IPS version 6.0 (3) E1 with a licensee agreement valid. Now, we want to update version IPS 1.0000 E2, is that the update is possible? If so guide me how and also guide me or provide the link how to make a previous backup.

  Yes, I just do the same thing. You will need to download the upgrade with the extension pkg (not the image file that I kept trying to do). The file is: IPS - K9 - 6.1 - 1 - E2.pkg under the security software, software updates.

  Link:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ips6

  Once you have this file, put it on an FTP server, or place the file on the local client that you use to connect to the IPS with IDM. You will need to go to the update of sensor in the IDM and either choose FTP or local update path and point to the file. Sensor recharges when it is made, but you don't won't restart ASA. It will take about 5 minutes, and then you should be able to reconnect to your sensor with IDM.

  Here is a useful link on the upgrade:

  http://www.Cisco.com/en/us/docs/security/IPS/6.1/Configuration/Guide/CLI/cli_system_images.html#wp1231089

  Here is a link to make a backup of the config:

  http://www.Cisco.com/en/us/docs/security/IPS/6.1/Configuration/Guide/CLI/cli_configuration_files.html#wp1033167

  I hope this helps!

  Jason

• Get-VMHost: you have changed the world: DefaultVIServer and global: DefaultVIServers system variables. This is not allowed. Please reset them to $null and reconnect the server vSphere.

  Hello world

  After the upgrade to PowerCLI version 5.1 however I can't run even the simplest command because it always ends up with the following error:

  Get-VMHost: you have changed the world: DefaultVIServer and global: DefaultVIServers system variables. This is not aRA. Please reset them to $null and reconnect the server vSphere.

  C:\Users\Albert\AppData\Local\Temp\7900df01-f6c1-48c6-ac1e-047dfff90fb6.ps1:1 tank: 11
  + Get-VMHost < < < <
  + CategoryInfo: NotSpecified: (:)) [Get-VMHost], InvalidState)
  + FullyQualifiedErrorId: VMware.VimAutomation.ViCore.Types.V1.ErrorHandling.InvalidState, VMware.VimAutomation.ViCore.Cmdlets.Commands.GetVMHost

  Can someone please suggest to me how to fix the script for my v3.2.0 PowerGUI IDE can work with the latest PowerCLI in my computer laptop 64 bit Windows 7?

  Thank you.

  And I just tried with PowerGui (same versions of PowerGUI and PowerCLI you use), no problem.

  Must be something local on your desktop.

  Maybe try a uninstall/reinstall of PowerGUI?

• I got the Beta version on my phone and now I HAV to change no update.

  I got the Beta version on my phone and now I HAV to change no update. Coz my phones says 10.0.1 and it is up to date. FYI, I deleted the profile end time. !

  < re-titled by host >

  Hello

  If it says 10.1 ios so it is like mine and up-to-date.

  See you soon

  Brian

• CCleaner shows a plugin in firefox without the name of the program or the Publisher and with a version number of '0', and it can be disabled or deleted.

  CCleaner shows a plugin in Firefox without the name of the program or the Publisher and with a version number of '0', and it can be disabled or deleted. It is a plugin for Firefox by default, and if so, what do I do? It does not appear in my list of Firefox addons in Firefox and a malware scan does not detect.

  It is possible that the profile has become corrupted, and you can try to start a new profile.

  • Use the Profile Manager to create and delete profiles Firefox

• Update of Firefox version make my settings and preferences reset themselves or they stay the same

  I wanted to know if when I update or the firefox browser is automatically updated to the latest version so my settings and browser preferences etc. that I made for the firefox browser change or reset themselves by default because I do not wish that they be as it is and would be a nuisance if I keep things from setting back again and again when the browser is updated to the version newer and newer so tell please me it doesn't, thank you.

  No, Firefox respect your preferences when you update. You should always have the value Firefox automatically updated, like this you keep most secure and the latest version. All your personal data and settings are safe.