How to configure windows xp to invite before you move the files/folders

Similar Questions

• How to perform certain actions pre-build before you package the project?

  Hi all

  In the BlackBerry Plugin for Eclipse, I want to run some additional actions (such as the batch file or a file of execution) before packing my project.

  First of all, I try to find out if there are options in BlackBerry_App_Descriptor.xml. I found that there is a 'PreBuildStep' in the xml file. However, I can't find the document on the use of this field.

  In BlackBerry_App_Descriptor.xml:

  " PreBuildStep=" "PostBuildStep =" "CleanStep =" "GenerateALXFile ="false">"

  Another approach is to change the draft package command line. However, I can not find where to edit the command line. Here's the command line when I try to my project package.

  Sachet of project command in the console window:

  C:\...\bin\rapc.exe -codename=deliverables\5.0.0\HelloWorld deliverables\5.0.0\HelloWorld.rapc .jar in a quiet... D:\BlackBerry\HelloWorld\bin

  If you have an idea about this problem, please share it with me. Thank you very much.

  Jones

  I need myself but I do not believe that yet, it has been implemented. I tried to add a command to it and nothing ran. I think it will be ready when they release the next beta.

  What I did is to put in place external tools in Eclipse and run them just before I get the package.

  Run > external tools > External Tools Configuration...

  It is also in the toolbar (green "play button" with red Toolbox below).

• Is it necessary to have windows 7 is installed before you buy the upgrade of Windows 8

  Hello
  Is it necessary to have windows 7 installed before you buy windows 8. Or only the product key is sufficient.

  Lets assume that it is necessary to have windows 7 installed. Then, suppose if I want to reinstall windows 8, I have to follow the procedure:

  1. install windows 7
  2. run the upgrade of windows 8

  Or we can directly run windows 8 upgrade.

  Please help in solving my doubt.

  Andre said it is "recommended", it is always best to clean install original DVDs.

  Maybe you can google that question, you can get answers, we cannot give you here.

• How can I copy/move the files/folders to other files/folders in windows 7?

  Can you move or copy files or folders with the help of drag-and - drop in windows 7?  Can move or copy files/folders by right click Select copy/move files drop-down menu files, select the file and click ok in windows 7?  It's the easiest way to move/copy large files.  With fall and drag it moves only files unless it's external media then it will copy. What do you do if you need the same files in different folders?

  This is what you need:
  http://www.thewindowsclub.com/ultimate-Windows-Tweaker-v2-a-Tweak-UI-for-Windows-7-Vista

  Download and run as administrator and click "other settings"... If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• I have a problem with Adobe version reader 11 download of a PDF file and saving it to my download folder before you open the file.  I just it opens first, and then I'll save it if necessary.

  When I click on a PDF file on a web page, the file download in my download folder before opening so I can read it.  I would like the PDF file for just to open and then I can save it if I choose to do.

  Hey Joe,

  It seems that the plugin from Adobe's PDF Viewer is not installed on your web browser. Please make sure that you enable Adobe PDF viewer browserplugin to configure to use the plug-in in Adobe PDF.

  Once the PDF viewer plugin is installed, you will be able to view the PDF in web browser before saving it.

  Let me know if you encounter a problem or have a question more.

  Kind regards

  Nicos

• How to move the FILE from one place to another and keep "Indexing" have to move to the unknown location so you can't discover its full file path? Windows instructions provide information wrong re: how to do this!

  Make a bunch of audio files, placed in a folder on my desktop. Files initially sent to RealPlayer to burn, but when finished burning CD and went to read a CD, folder got seized by Media Player, 'Indexed' and disappeared from the office. I'm a relatively new computer user, and I need to learn more about file paths, how to view the path FULL of a file on my computer and how to type (create) full path when I need to. The "Indexing" feature seems to erase this lesson for me, and after having spent four hours trying to find Vista instructions on "How to move the file from one place to another", I gave up! Windows 'Help and Support' on my computer gives wrong directions. It states that if I right click on a folder > properties, a dialog box opens with a tab by which I can move my account. There is no tab location here. I found locations tab when right click on the "Mobile" folder, but still no option to "move file". No idea what is the folder "Roaming" or why it's on my computer. I want my audio files in the My Music folder, but this place is "access denied." Don't know how to get the audio file it in any case, but if anyone has any advice, I would be very happy! Thank you. PS - I had no problem moving folders in XP. I don't like the idea that a computer is to decide where to put my files. I want to control where I put my files. I don't like the way search works under Vista. I liked the XP search companion better because, for a computer fool like me, it was really easy to organize and find files and folders and had an option specific to find audio and video file TYPES.

  Here is an article on how to move your personal folders in Vista: http://www.howtogeek.com/howto/windows-vista/moving-your-personal-data-folders-in-windows-vista-the-easy-way/.  If you're talking about the special folders (such as photos, Documents, office...), then here is an article on how to move: http://www.winhelponline.com/articles/95/1/How-to-move-the-special-folders-in-Windows-Vista.html.

  If you have trouble with the search after you move the files, then rebuild the index: http://www.tech-recipes.com/rx/2103/vista_rebuilding_the_search_index/.  Here is an article on how to use Indexing Options in Vista that may be useful for you: http://www.vistax64.com/tutorials/69581-indexing-options.html.

  If the above does not help, your problem seems to relate to the image of the files/folders and their interactions with Media Center (which operate on different other folders).  Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the people who specialize in issues of the image will be more than happy to help you with your quesitons.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I configure Windows 8 ask me before closing a browser window?

  How can I configure Windows 8 ask me before closing a browser window?

  Does anyone know if there is a way to configure programs such as IE or Chrome, even files explore to ask before a window is closed when you miss click on the X icon? I know that there is a way like to keep the research that you've had, but I want to open a dialog before it closes is not to save my session information.

  Thank you!

  Alguien conoce una forma to prevent than simply to cierren las ventanas than uno esta using programas como o IE Chrome, y hasta el explorador carpetas, sino that empowers a dialogo seeking confirmation box? What does hay una forma to save las busquedas, o una sesion sites, pero no eso are lo than busco.

  Gracias!

  It's not really a way to do that, I'm sorry to say.  At least no way built in and not by any software I've seen.  Although I'm not really sure there is no technical limitation if someone wanted to do it.

  I actually usually use the keyboard just to avoid such accidents.  If I want to enlarge or shrink a program, I'm going to press the Windows Logo and the top or down arrows rather than click, so that I don't hit that X.  :)

• How to configure Windows to allow the parameters and software downloads to appear in system and standard user administrator?

  I HAD TO REINSTALL WINDOWS VISTA (SERVICE PACK 2) DUE TO A TROJAN HORSE THAT ATTACKED MY SYSTEM. I USED THE SUPPLIED RECOVERY DISCS SET WITH MY COMPUTER BECAUSE THE SOFTWARE HAS BEEN PRE-LOADED AND I HAVE NOT RECEIVED SOFTWARE FACTORY. WHEN I WAS SETTING UP USER ACCOUNTS, I CREATED THE ACCOUNT TO ADMINISTRATOR (WITH PASSWORD) AND A STANDARD USER ACCOUNT. WHEN I CHANGE THE SETTINGS IN MY COMPUTER IN EACH ACCOUNT, IT DOES NOT APPEAR THERE EITHER ACCOUNT. I DO CHANGES IN PARAMETERS OF EACH ACCOUNT INDIVIDUALLY. CAN I SET UP SO THAT WHEN I CHANGE THE SETTINGS, IT WILL DO THAT IN THE TWO ACCOUNTS? THANK YOU FOR YOUR HELP.

  original title; HOW TO CONFIGURE WINDOWS TO ALLOW THE SETTINGS AND SOFTWARE DOWNLOADS APPEAR IN ADMIN SYSTEM AND STANDARD USER?

  Most PC manufacturers who don't give you the disks give you a partition on your hard drive that contains the images of the disks so that you can burn yourself.  You should check out.

  When you say "change settings in both accounts' exactly what are the parameters what do you mean?  It is normal that many Windows settings to be on a per user basis.  For example. the desktop background is a 'definition' which is completely independent for each user.  You cannot set up a wallpaper for a user and hope that it displays desktop of another user.

• How to configure windows 7 pc to allow full access to the xp pc.

  original title: how to configure windows 7 pc to allow full access to the xp pc. Both PCs have been configured for full sharing

  How to configure windows 7 pc to allow full access to the xp pc. Both PCs have been configured for full sharing. Windows 7 pc has full access to the xp pc. However, on xp pc, all readers of windows FP7 can be seen, but access not authorized expect public folders.

  Any suggestions welcome

  Search in the sharing folder entries in a procedure step by step for the creation of a network of Ethernet cable of two computers between Windows 7 and Windows XP with ICS

  You will be able to share files in C:\Users but Windows 7 has special protection on the folder root the C:\ drive and others.

• How to clear the output buffer, possibly resize and burn again, before you begin the task of output

  I use PyDAQmx with a USB-6363, but I think the question is generic to DAQmx.

  I have an output buffer that I want to be able to (re) write to without starting the task output.

  More specifically, I have a graphical interface and a few sliders, the user can move.  Whenever the slider changes, a new set of values is loaded into the buffer output through DAQmxWriteAnalogF64.  After you set the value, the user can click on a button and start the task output.

  In some cases the change in cursor does not require a change in buffer size, only a change in the data.  In this case, I get the compalint following DAQmx as they tried writing:

  The generation is not yet started, and not enough space is available in the buffer.

  Set a larger buffer, or start the generation before writing data more than content in the buffer.
  Property: DAQmx_Write_RelativeTo
  Value: DAQmx_Val_CurrWritePos
  Property: DAQmx_Write_Offset
  Corresponding value: 0
  Property: DAQmx_Buf_Output_BufSize
  Corresponding value: 92

  In other cases the change in cursor requires both change in the size of the buffer and data modification.  In this case, I get the following, but only after that do a few times each time increase the size of the writing.

  DAQmx writing failed because a previous writing DAQmx configured automatically the size of output buffer. The size of the buffer is equal the number of samples written by channel, so no additional data can be written before the original task.

  Start the generation of before the second writing DAQmx or set true in all instances of writing DAQmx Auto Start. To gradually write to the buffer before starting the task, call DAQmx Configure an output buffer before the first writing DAQmx.
  Task name: _unnamedTask<0>

  State code:-200547
  function DAQmxWriteAnalogF64

  I tried to configure the output via DAQmxCfgOutputBuffer buffer (in some cases, by setting it to zero or a samples, then save again, in an attempt to clear it) but that doesn't seem to do the trick.

  Of course, I can work around the problem by loading data only when the user clicks the end button, but not what I'm asking here.

  Is it possible to "remake" the writing of output before you begin the task?

  Thank you

  Michael

  Today I have no material practical to validate, but try unreserving task before writing the new buffer:

  DAQmxTaskControl (taskHandle, DAQmx_Val_Task_Unreserve);

  With a simulated device, he made the error go away in case the buffer is the same size.  You will need to validate if the data are in fact correct, but I think it should be (unreserving I would say reset the write pointer so the old buffer are replaced with the new data).

  I always get errors when you try to change the size of buffer if (on my 6351 simulated).  I posted some similar mistakes about the reconfiguration of the tasks here, I guess it is possible that this issue has also been set at 9.8 (I always use 9.7.5 on this computer).  If the behavior is still present in the new driver, and also appears on real hardware (not just simulated), then it seems that this is a bug of DAQmx someone at OR should be considered.

  I wrote a simple LabVIEW VI that captures the error in order to help people to NOT reproduce it:

  

  The best solution at the moment would be likely to re-create the task if you need to change the size of the buffer (or avoid writing data until you are sure what will be the size of buffer).

  Best regards

• "This copy of Windows must be enabled before you can login."

  We have a laptop with Windows XP we have used for a while without problems.  All of a sudden, we get a box to activate product windows that we never had before, demanding that "this copy of Windows must be activated before you can connect."  No new software has been installed recently, so this seems very strange.  Is this a virus or is it true?

  These steps will work as long as the PC has only one user profile, and to Internet Explorer 8 is installed.

  In my case, I:
  (1) the steps already listed here, with an adaptation: safe mode: command prompt
  "Start in"Safe Mode".  To do this, turn on the laptop, and then press F8, as it is booting up.  Passes in 'Safe' Mode by selecting the option 'Safe Mode'. * Safe Mode command prompt *.
  Once you're on the office in 'Safe Mode', click 'Start' then click on 'run '.
  At the command prompt run type the following EXACTLY

  Rundll32.exe syssetup, SetupOobeBnk

  (2) restart the PC and start back in Safe Mode command prompt.
  (3) on a separate computer, download IE8 for WinXP and put it on a USB key. I renamed the file IE8install to make it easier later.
  (4) plug the USB on the problematic PC
  (5) in the command prompt installing IE8. Your USB drive letter may be different. If e: does not work, try f: etc until you find the right one.
  type e: * enter *.
  ie8install.exe * enter *.
  (6) complete the installation, restart the PC, and you should be good to go.
  I thank everyone in this thread for their help. He points a headache hours.

• Get the error message "Windows must be enabled before you can connect. You want to activate now.

  Original title: impossible to activate Windows XP

  I had to reinstall XP Professional. Now, when I start the computer get a message saying "Windows must be enabled before you can connect. You want to activate now? ». When I click on Yes, the desktop backround sometimes nothing happens. the activation wizard does not open and no error message appears always.

  Hi Dale,

  Since you are not able to open a session in normal mode, log in in safe mode and perform a few steps that would help you solve the problem.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Perform the steps mentioned below and see if it helps.
  a: turn on your PC
  b: Press F8 repeatedly , then in Mode safe
  c: Logon as per normal
  (Note: administrator password is usually empty, but I hope you know your password)
  d: Authorize the Office to load completely (who answered "Yes" to continue mode without failure)
  (Note: this is just a long way to say go to Safe Mode)
  e: Click Start - run
  f: type exactly: rundll32.exe syssetup, SetupOobeBnk (then click OK)
  (Note: a single space after 'rundll32.exe' also the Oo are two letter o in "oobe"; capital and the comma are important)
  g: Wait a few seconds (although you won't see any change)
  h : Restart your PC normally (start - stop - restart - Ok)
  i: You will be able to return to the Normal Mode.

  Good day!

  Answer please if you have any questions.

• How to identify and remove duplicates and files in Windows 7 and those who are not the files in Win 7

  I used a program called IntelliMover and think that it flies over the files and unnecessary files.  How can I identify and delete these files?

  If make sure you that the files are not used by some programs or windows, then, the answer is YES.
  Easier would be, just look for duplicates in the folders where the files are not required by Windows or programs.

• How to download windows 8 64-bit unique language. ISO file.

  How to download windows 8 64-bit unique language. ISO file for re in 2000 installation for HP laptop.

  How to download windows 8 64-bit unique language. ISO file for re in 2000 installation for HP laptop.

  Hello

  The only language of Windows 8 is available only pre-installed on a computer, it can not be downloaded.

  You must contact the HP Support to know what recovery options you have.

  Concerning

• How can I call Save as dialog box before you download pdf files?

  How can I call Save as dialog box before you download pdf files?

  Here's my favorite scenario:

  1. the user clicks on the button

  2 Save as dialog box displays

  3. the user chooses the place

  4. a set of PDF files download here OR download a single zip file

  Background:

  I want to ensure that the user sees that the files are downloaded. I'm content to users who are not Web warned.

  Concern:

  1. the user has no idea how to find the downloaded files or files have even downloaded.

  2. I would like to deliver all in the form of zip files. Not sure if the automatic opening of zip files still exist.

  FOR INFO:

  I use jQuery UI buttons. Not sure if that factors in the response.

  Just for clarity, I'm not forcing a download. The user will click on a button.

  Click on a button or click on a link, either way you are technically running a script to force a download.

  I guess that's the PHP on the server.

  Yes but it is only a part of it.  Once the form runs, another script is called that opens the browser download dialog.

  Y at - it a php script to call the open/save dialog box?

  Yes.

  Name this file zip2download.php.

  Add a link to your HTML page:

  zip2download.php">Download the Zip

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

  http://ALT-Web.blogspot.com/