IR report particular column should not be sought

Similar Questions

• Interactive report - new columns not displaying when you reset report

  Hi all

  I modified a report query interactive to display additional columns, but when you select Reset the report the additional columns are not displayed. I know that I can select them via the menu actions, then ssave the report like the one by default, but I was wondering if there is anyway to "clean" the report parameters to show them all by default anyway.

  I use v 4.01.00.03 with no option to upgrade atm

  Thanks in advance

  Greg

  OK, so I found the table - wwv_flow_worksheet_rpts where you can directly update the REPORT_COLUMNS column to view the columns of your choice by default.

• Newly added column is not displayed in the interactive report

  Hello
  
  I have a tableA with 3 columns. In the application I view as form with region as interactive report (Oracle 10 g Application Express 3.2) report.
  
  I added a column for tableA.Now when I'm refreshing the report by adding this column in the select query, the new added column is not displayed in the application.
  
  How can I do this so that the added column can be displayed. I don't want to delete it all and do it again.
  
  Thank you
  Siya

  Hello

  Run the application and select the columns in the report menu interactive action.
  Save the layout by default if you always see these columns

  BR, Jari

• Report should not display all data by default.

  Friends,
  
  Can someone tell me how can I restrict default data view report.
  My requirment is that the user should not display data until he provides the value of fast page level.
  
  Thanks in advance!
  
  Kind regards
  Cecilia.

  Hello

  Define a default value in the prompt of dash in the drop default value specific select list
  in the specific value gives the value which is not matching your criteria

  hope this helps you

  Concerning

  NGO

• How to restrict a particular column values in a datagrid in app flex4

  Hi friends,

  I use a datagrid with 3 columns. Already I entered shots in the first two columns, now I want to limit the 3rd, it should allow numbers only.

  does not accept the characters and special characters,

  How restrcit a particular column value,.

  any suggession code or extract, are welcome

  Thank you

  B.Venkatesan

  Hello

  It works:

  http://ns.Adobe.com/MXML/2009.

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx" minWidth = "955" = "600" minHeight >

  Import mx.collections.ArrayCollection;

  [Bindable]

  public var arr:ArrayCollection = new collection ArrayCollection ([{A1: "aaa", B1: "bbb"}]);

  ]]>

  Thank you and best regards,
  ------------------------------------------------------------------------------------------
  Vibhuti Gosavi . [email protected] | www.infocepts.com
  ------------------------------------------------------------------------------------------

• Report multi columns

  Helllo,
  
  I use the Application Express 3.1.2.00.02
  
  I want to do a report 3 columns.
  
  I just saw this thread (2005 - that's why I started a new)
  Report multi columns
  
  When I applied the model to my region to report, I got the following error:
  
  ERR-1025 error processing PL/SQL expression. MOD 0 (1,3)
  
  Can someone tell me why?
  
  Thank you
  
  Roseline
  
  **********************************************
  
  My query - select ename from EMP
  
  The model I created by steps:
  
  Create a report line model...
  Workspace > Application Builder > shared components > Themes > models... Create
  Model Type: report
  Method of creation: from scratch
  Name: A field - three columns
  Theme: your choice
  Template class: Standard
  Model type: named column (model line)
  
  Edit the sample report, you just create and change the following:
  Model of line 1: < td width = "150" > #1 # < table >
  Model line Condition: use based on the PL/SQL Expression
  Template line 1 Expression: mod (#ROWNUM #, 3) 0
  Line 2 model: < td width = "150" > #1 # < table > < /tr > < tr >
  Model line Condition: use based on the PL/SQL Expression
  Model line 2 Expression: mod (#ROWNUM #, 3) = 0
  
  Before lines: < tr >
  Lines back: < /tr >
  
  Create a query based region report. For my test, I used "select ename from emp". Have the report use the line template.
  
  It is just a quick sample and dirty. For a better look, you will need to do your own formatting...

  You can not just repeat mod (#ROWNUM #, 3) = 0 in all conditions - b/c who take them just like you saw. You need different lines on each.

  If you run this query, you will see why you get only 4 rows:

  SELECT 'EMP ' || ROWNUM,
         CASE
           WHEN MOD(ROWNUM, 3) = 0 THEN
            'EMP ' || ROWNUM
         END col
    FROM dual
  CONNECT BY LEVEL < = 12
  

  I think you should change to something more like this:

  Condition 1: MOD(ROWNUM, 3) = 1
  Condition 2: MOD(ROWNUM, 3) = 2
  Condition 3: MOD(ROWNUM, 3) = 0
  

  I have not tested it out but try it

• When inserted null value should not

  Hello:
  
  I installed my application on apex.oracle.com. I hope someone can help me with a problem. I'm having is with an agenda: P17_APPLICATION_KEY. When I click on my "submit" button, the insert statement is insert a null value into this field when it should not. When you select an organization, you will see the application key in the column of the report.
  
  The application number is 48367.
  The page number is 17.
  The username is TestUser.
  The password is test.
  
  Tables and data are also configured. If you need to look at the charts, the schema is HCB.
  
  Can someone take a look at my application and help me understand why the value of application_key which is in the report is not displayed in my table, HISA_AGREEMENTS_DOC?
  
  Thank you very much for the help.

  Hello

  I had a glance through your application, and even if you are referring to P17_application_key in your insert statement, if you look at your state of session on page 17, you will see that p17_application_key is infact null.

  In your code, the page element is set to the value of the database, but it is not really filled from anywhere.

  You can change the report "APPLICATION_KEY" of "Standard report column" column to "Display text (saved state)" and who then reference it in your insert instead of your page statement, article P17_application_key.

  -L' Roamer.

• request (?) featured: matrices or tables for a particular column sort

  Hello all-

  This may be a stupid question, because I'm always still not quite clear on what are the differences between the matrixes and 2D arrays in LabView. So far the only distinction I seemed to find, it is that certain features of table return errors when the matrices are entered and vice versa.

  Anyway, here's my question.

  Suppose I have a matrix where the first column represents the 'values' that have been measured and the second column 'account'. I would like to take a unordered matrix (i.e., the value column is not ordered) and recover a matrix that has had its lines re-arranged according to the values in the first column.

  For example, if my matrix:

  [5-1;

  0 11;

  1-5;

  3-10]

  I would like to as labview to return:

  [0-11;

  1-5;

  3-10;

  1 of 5]

  When I was trying to find a way to do it (without writing my own sorting routine which, admittedly, wouldn't be too bad, but I'm a lazy programmer ), the only thing I found that came close was the 'matrix of D 1 sort' Subvi. However, even if I had to store the values in a table and charges in another table, I'd be able to do is sort the table values. I wouldn't be able to tell what labview reorganization, I would need in order to perform the same reorganization charges.

  I'm a little surprised that there isn't a quick and intuitive way to do this (at least that I can find). A LabView feature addition that could help with this problem would be if the "1 D Array sort" routine returned a second output - a vector with the mapping of the index used - similar to MATLAB. MATLAB help for the function 'out ':

  "[There, I] = SORT(X,DIM,MODE) also returns a matrix of index I.. «If X is a vector, then Y = x.»

  Of course, there may be a quick fix for what I'm missing...

  Take a look at this post. I don't know that you can change for your particular type of data.

  (in contrast to the first colum, create the sort key, table 2D reconstructed according to key)

• How to hide a particular column in CSV

  Hi team,

  I had created interactive report in my application, in which I had created a column as "replicate" and display as a picture in this report as mentioned below

  1. motion used in our interactive report is

  select "ROWID",
          rowid "Replicate",
  apex_item.checkbox (1,
                           prod_map_id 
                            ) checkbox,
                            region,
                            market
  
  from "#OWNER#"."D_MAP" 
  
  
  order by nvl(modified_dt,created_dt) desc
  

  Replicate now for column I replace with image

  Link text-> < img src = "" #IMAGE_PREFIX #wwv_edit2.gif "alt ="Duplicate">"

  So when we run the line id report used to replicate get will replace the above image as shown below

  

  Now when we click the Actions button and select the option to download in CSV format, then we see in the CSV file under, in what we see "replicate" and the "check box" columns.

  How to remove columns in the CSV file, downloading when clicking action buttons.

  

  Kind regards

  Sruthitamiri

  Sruthi Tamiri wrote:

  Thank you for the quick turn around fac586, I had used: request is null for this particular column, it worked.

  Could you please explain to me what is request here?

  DEMAND is a built-in substitution string that is fundamental for the functioning of APEX, and is explained in the documentation.

• Hi, my camera is a nikon d 5300. Lighrtoom is 5.7.1. Lightroom can't read and develop the pictures that are taken in raw. If I sort to import raw photos - there is the error report that lightroom does not have this kind of raw format.

  Hi, my camera is a nikon d 5300. Lightroom is 5.7.1. Lightroom cann not read or develop the photographs that are taken in raw. If I try to import raw photos - there is the error report that lightroom does not know this kind of raw format. My computer is 1 year (Win 7 HP). Who could help me?

  Eugen

  DJ, the version number is in the subject line: 5.7.1. It's weird because this version should support the D5300 very well. My main guess would be a bad player or a bad USB cable.

  Eugen, you can try plug the camera directly and download the images like this?

• Inner join with an asymmetric column: plan not optimized SQL

  Hello
  
  I think that it is a FAQ, but I was unable to get a useful answer by Googling.
  
  Oracle version is 11.2.0 on Sparc64.
  
  Consider the following code:
  

  drop table x;
  PROMPT
  PROMPT Populate x with some users. Note the iduser PK
  PROMPT
  
  create table x as
  select 1 iduser, 'PUBLIC' owner from dual
  union
  select 2 iduser, 'SYSTEM' owner from dual
  union
  select 3 iduser, 'XDB' owner from dual
  union
  select 4 iduser, 'APPQOSSYS' owner from dual
  union
  select 5 iduser, 'SYS' owner from dual
  union
  select 6 iduser, 'OUTLN' owner from dual
  union
  select 7 iduser, 'DBSNMP' owner from dual
  /
  
  alter table x add constraint pk_x primary key(iduser);
  
  
  PROMPT
  PROMPT Create a table y from all_objects, but using the previous iduser 
  PROMPT as foreign key (owner column is not needed). Note the index
  PROMPT on column iduser
  PROMPT
  
  drop table y
  /
  create table y as
  select x.iduser, all_objects.*
  from all_objects, x
  where x.owner = all_objects.owner
  and x.owner in  ( 'PUBLIC', 'SYSTEM', 'XDB', 'APPQOSSYS',
      'SYS', 'OUTLN', 'DBSNMP')
  /
  alter table y drop column owner;
  alter table y add constraint y_fk foreign key(iduser) references x;
  create index idx_y on y(iduser);
  
  PROMPT
  PROMPT Take some stats. X stats are irrelevant, I think
  PROMPT
  exec dbms_stats.gather_table_stats( -
      USER, -
      'Y', -
      estimate_percent => DBMS_STATS.AUTO_SAMPLE_SIZE, -
      degree => DBMS_STATS.DEFAULT_DEGREE, -
      cascade => true, -
      method_opt => 'FOR COLUMNS IDUSER SIZE AUTO', -
      granularity => 'ALL' -
  )
  exec dbms_stats.gather_table_stats( -
      USER, -
      'X', -
      estimate_percent => DBMS_STATS.AUTO_SAMPLE_SIZE, -
      degree => DBMS_STATS.DEFAULT_DEGREE, -
      cascade => true, -
      method_opt => 'FOR COLUMNS IDUSER SIZE AUTO', -
      granularity => 'ALL' -
  )
  
  set autotrace trace exp
  
  PROMPT
  PROMPT APPQOSSYS has only 5 objects (well, your output may vary, but it should by
  PROMPT very similar), but the following query ignore the index and do a full scan on Y
  PROMPT
  select x.*, y.*
  from x, y
  where x.owner = 'APPQOSSYS'
  and y.iduser = x.iduser
  /
  
  PROMPT
  PROMPT Virtually, equivalent to the previous one. But the explain plan is very different
  PROMPT and the index is used
  PROMPT
  
  select y.*
  from x, y
  where x.owner = 'APPQOSSYS'
  and y.iduser = 4
  /
  
  set autotrace off

  The result is:
  

  ............................ [snip] .........................
  
  ( EXPLAIN PLAN OF FIRST QUERY)
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 1702571549
  
  ---------------------------------------------------------------------------
  | Id  | Operation          | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  ---------------------------------------------------------------------------
  |   0 | SELECT STATEMENT   |      |   559 | 58136 |   142   (1)| 02:23:19 |
  |*  1 |  HASH JOIN         |      |   559 | 58136 |   142   (1)| 02:23:19 |
  |*  2 |   TABLE ACCESS FULL| X    |     1 |     9 |     2   (0)| 00:02:02 |
  |   3 |   TABLE ACCESS FULL| Y    | 55883 |  5184K|   139   (0)| 02:20:47 |
  ---------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     1 - access("Y"."IDUSER"="X"."IDUSER")
     2 - filter("X"."OWNER"='APPQOSSYS')
  
  
  
  ( EXPLAIN PLAN OF SECOND QUERY)
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 2241001346
  
  -------------------------------------------------------------------------------------
  | Id  | Operation                   | Name  | Rows  | Bytes | Cost (%CPU)| Time     |
  -------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT            |       |    10 |   950 |     2   (0)| 00:02:02 |
  |   1 |  TABLE ACCESS BY INDEX ROWID| Y     |    10 |   950 |     2   (0)| 00:02:02 |
  |*  2 |   INDEX RANGE SCAN          | IDX_Y |    10 |       |     1   (0)| 00:01:01 |
  -------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     2 - access("Y"."IDUSER"=4)

  Well, the question is very simple: is it possible to get the first query to take the index and to avoid complete analysis? With no clues, of course.
  
  All of your advice and comments will be welcome. Thanks in advance.
  
  Best regards

  jjuanino wrote:

  Well, the question is very simple: is it possible to get the first query to take the index and to avoid complete analysis? With no clues, of course.

  All of your advice and comments will be welcome. Thanks in advance.

  This is a limit known optimizer - no realistic solution.

  The optimizer can recognize with the help of a histogram iduser on table column is very unevenly distributed, but there is not a generic strategy to recognize what owner on the table of X corresponds to what iduser on the table of Y.

  An approach that can help - even if I do not remember seeing documented is to rewrite the query with a subquery and use the / * + precompute_subquery * / tip.
  I have not tried with your data, but something like:

  select * from y
  where iduser in (
      select /*+ precompute_subquery */ x.iduser
      from x
      where owner = 'APPQSYS'
      )
  ;
  
  Regards
  Jonathan Lewis
  
  P.S.  Found a reference note by Tanel Poder: http://blog.tanelpoder.com/2009/01/23/multipart-cursor-subexecution-and-precompute_subquery-hint/
  

• My imported table has columns invisible, not changeable or removable?

  Hi all

  I imported a huge table of Word in my InDesign CC document. I noticed that the columns do not line up as they should. The problem is that the column lines cannot be drawn so that they are aligned; It seems to be a second line of the column on some of these cells that prevent things from the tail. The columns select as one unit, but can not be aligned because of this mysterious second line. No amount of clicking or dragging cannot reach these chips. Anyone know what is happening?

  See below, the columns titled 5, 10, 20, and 30 line they move to the bottom of the page.

  

  Below, is the point of view guided. I can't double lines and these double lines prevent things from the tail.

  

  I'm not an expert on paintings, but it seems to me that in the two lower sections, the cells are merged between the broad and narrow gauge. If Cancel you the fusion of cells first, you should be able to remove the spacers or just leave them and things will probably line up anyway.

• Error in the COLMAP clause. Column name not found

  Hi guys,.
  
  I must be missing something simple here, but I can't understand it. I have a very simple test, I am trying to make. Remap the 1 table column in the other on replicat.
  
  I created the file defgens.
  *
  * Definitions created/modified 2013-02-12 13:08
  *
  * Description of the areas for each entry in the column:
  *
  * 1 name
  * Data type 2
  * 3 external length
  * Fetch 4 Offset
  * Level 5
  * 6 level
  * 7 null
  * 8 so strange bump
  * Inner length 9
  * 10 binary length
  * Length of the table 11
  * 12 most significant DT
  * 13 least significant DT
  * 14 high precision
  * 15 little specific
  * 16 point elementary
  * Occurs 17
  * Column 18 key
  * Data type of void 19
  *
  *
  Definition of table of BILLING. B1
  Length: 92
  SYSKEY: 0
  Columns: 2
  B_ID 64 50 0 0 0 1 0 50 50 50 0 0 0 0 1 0 1 2
  B_F_NAME 64 30 56 0 0 1 0 30 30 0 0 0 0 0 1 0 0 0
  End of definition
  *
  Definition of table of BILLING. B2
  Length: 92
  SYSKEY: 0
  Columns: 2
  B_ID 64 50 0 0 0 1 0 50 50 50 0 0 0 0 1 0 1 2
  B_L_NAME 64 30 56 0 0 1 0 30 30 0 0 0 0 0 1 0 1 0
  End of definition
  
  
  I installed the replicat read the sourcedefs and remap the columns
  
  -Identify the Replicat group:
  REPLICAT rxtest
  -State that the source and target definitions are identical:
  -ASSUMETARGETDEFS
  SOURCEDEFS /u12/oracle/golden_gate_11_rep/dirsql/defgen_billing.sql
  -Delete the installation program
  DISCARDFILE u12/oracle/golden_gate_11_rep/dirout/rxtest.txt, SERVING
  SETENV (NLS_LANG = 'AMERICAN_AMERICA. WE8MSWIN1252")
  -Specify the database connection information as needed for the database:
  GG username, password
  -Specify the error handling rules:
  REPERROR (BY DEFAULT, ABEND)
  
  DDL EXCLUDE ALL THE
  
  Billing.b1, billing.r1 of the TARGET CARD,
  () COLMAP
  B_ID = id,
  b_f_name = what);
  
  Now, when I try and start replicat rxtest I get this error in the report.
  
  Resolved CARD (entry of BILLING. (B1):
  THE CARD BILLING. B1, TARGET billing.r1, COLMAP (B_ID = id b_f_name = what);
  ... (B_ID = id b_f_name = what...)
  ^
  Error in the COLMAP clause. Column name not found.
  
  Any ideas? Thank you

  And the ranking of the column names in your clause of colmap? If that is not reversed?

• Interactive report formatting column

  What breaking control is applied for all columns of interactive report then the color applied to any column is not applied.
  

  .apexir_WORKSHEET_DATA td[headers="ABC"] {color: RED;}

  Sanjay

  user12957777 wrote:
  What breaking control is applied for all columns of interactive report then the color applied to any column is not applied.

  .apexir_WORKSHEET_DATA td[headers="ABC"] {color: RED;}
  

  With the break of control IR generates different supplement, you need to add another selector to the rules, so there's a game on the cells in the column in report view standard and break.

  See + {message identifier: = 9208685} +.

  (Please update your forum profile with a real handle instead of "user12957777".)

• Filters for a particular column in obiee 11g

  Hello
  I've created a report having 10 columns to measure and filter per month is less than (months in particular) that works perfectly. In fact, my requirement is in a single column to filter equal to the particular month. If it is possible please tell me how. Thanks in advance!

  Hello

  Goto Edit form for that particular column.

  and use the FILTER (measure_column for HELP (condition)).

  for example:

  FILTER ("XXXXX". "measure_column" USING ("OLIVER" ".") " D5. ""' The Times'."" Month' = particular_month))

  Try this... It works very well.