is 10g - possible to know if the report to get the data in the CACHE?

Similar Questions

• My account was hacked and someone accessed my email in order to steal more than £40 k from me, is it possible to know when the email was hacked, how and where to go?

  If anyone can help I'd really recognizing that like you wouldn't believe! Basically someone hacked into my email account and was intercepting all my e-mails regarding money transfers. They replaced all the real email I was sent with fake so I never saw what was going on and they responded on all the e-mails correct themselves with their own details.

  I have been informed that a number of ip addresses were followed but I'm really not very well with this and the police simply not contribute that much at all.

  This money is everything I had and I need to find this person or get more information.

  If anyone can help me please!

  Thank you

  Hey Helpreallyneeded,

  Your local authorities or the Government will be the people you need to contact in order to study the incident. Looks like you have already reached out to an entity, but you can look at other possible channels of assistance.

  For example, if you live in the United States, you may file a complaint with the Internet Crime Complaint Center.

  The resources available to you will vary according to programs of your location and the Government.

• Is it possible to know if the screen is locked or not?

  any listener or a static method to know the State of the screen?

  Thank you.

  Take a look at DeviceInfo class.

• Is it possible to know if the contents of a layer have been edited?

  HII...

  I wanted to know whether or not the contents of a layer have been edited since its creation... I'm not looking for a solution where the controls are carried out after the last document updated the... Allows to observe a scenario where a document is not saved... So, in this case how do find us that a layer has been changed since it was opened... ?? Please guide me...

  Thank you...

  PS: I need to compare between the two States of a layer. For example, when I start my plugin to create a document, it opens a document from a specified path. It contains a layer with its editability is to be drawn. Now, the scope of my plugin ends... The user is free to make any changes on the document, but it is forbidden to change this specific layer, but no one can stop the user... !!

  Now I raise my plugin once again, and I check if this layer has been published or not... Now, can someone guide me... ?? Since then, the scope of my plugin ends after the creation of documents, so I am not able to keep all the values in post...

  There is no way to tell after the fact if a layer has been changed. Even noticing when a user does it right now that they do is difficult; you will have to rely on something like the kArtPropertiesChangedNotifier, and it's a little risky. You can see when the author of this notification happens to see what art is selected and see if it is on your layer, but there are a few holes in it. Deleted, for example, would likely happen before that declaring then you'd see never the art on your layer is removed (since his is more selected, because his party).

  In general, the changes in art is almost impossible, I'm afraid

• How do you know if the page is made after forward

  Hi all

  I have a first page, after clicking on a button, it is transferred to a second page.

  Once on this second page presents after forward, I want to show this message

  throw new OAException("Trace Created successfuly",OAException.CONFIRMATION);
  

  So I need to put it in the process request

  But I don't want to show this message each time that this second page is rendered, I want to just show him when he is first shown after the verse forward. So, I need to put a condition before this line of code.

  What is this condition? I want to say is possible to know if the last event is an attacker?

  Thank you for your help

  Kind regards

  Afaf

  You can pass an extra parameter from the first page to the second page, and based on the value of this parameter, you can view this message.

  Or,

  You can store all the values of session from the first page, then according to the value of the message. Before displaying the message, reset the session value.

  It will be useful.

  See you soon

  AJ

• How many times should I empty the cache memory?

  I had problems with various Web sites and on other users advice made a full cache clear. I noticed an immediate improvement in the speed of loading pages. Do you have this help and if yes how often should I clean the cache? It is 420MB.

  Thank you

  I don't see how that can possibly be associated with the cache. The cache contains files from Web sites, such as images, scripts and style sheets. So when you visit a page you have already visited, you do not need to download everything again. The cache allows the pages to load faster, not slower.

  The cache is a fixed size, as well as the files are automatically deleted as new ones are cached. Unless you have to have some sort of issue as Web sites to research wrong, there is no need to delete it manually.

• How many people currently work at apple (by country, if possible), I write a business report and need to know the answer, thank you.

  How many people currently work at apple (by country, if possible), I write a business report and need to know the answer, thank you.

  Watch their deposits of the company. This community is to post technical questions.

  We are users like you. We are not Apple. If you wish to contact Apple use the link contact us at the bottom of this page.

• Is it possible to know if my screen colors to the correct color temperature

  Is it possible to know if my Macbook Pro display colors to the correct color temperature?

  When I got it, it seemed hot, so I adjusted... .but how do I know if it is now right?

  Hello there, Chris.

  It seems you are trying to determine how much to calibrate the screen on your MacBook Pro. The following Knowledge Base article provides a few strides and the link to do this in the latest version of Mac OS x:

  OS X El Capitan: calibrate your screen

  The colors on your screen can be changed by many factors, such as ambient light, the position and the angle of the screen and the age of the screen. To take these changes into account, you can set your display to show accurate color using calibrator Assistant monitor.

  Calibrate it regularly to ensure accurate color.

  1. Choose the Apple menu > System Preferences, click view, and then click color.
  2. Click calibrator Calibrate.Display wizard guide you through calibrating your monitor, then creates a calibrated color profile. When the display profile is ready, it is automatically assigned in the color profile of your screen.

  Some screens have additional built-in color calibration and precision features. For more information, see the documentation that came with your monitor.

  Set the color profile of your screen

  If your screen does not look right

• Hello, I would like to know if it is possible or there is the possibility to choose the path in the preferences to save backups of ios through itunes for windows pc devices. Thank all participants in advance of the availability, I offer cordi

  Hello

  I would like to know if it is possible or there is the possibility to choose the path in the preferences to save backups of ios through itunes for windows pc devices.

  Thank all participants in advance of the availability, I offer cordial greetings.

  Post edited by: andreava

  No preference, but there is a solution. See moving backup iOS device. See the rest of the tip of the user to do a split cell library if the library files and the media folder are on different drives.

  TT2

• Is it possible to know when a page redirects in the field of browser?

  Hi all

  Is it possible to know when page redirection occurs in the area of browser?

  Let me allow you to be a little more clear... I opened a gmail account in my browser field. After you enter the credentials, I clicked on the "connect" button and the page redirects to my account details. I just want to know when is this redirect?

  We can enter the url of the current page when a website redirects page 1 across the browserfield?

  BrowserFieldDemo in the JDE samples gives the answer for me.

• I have only a single ID and would like to know if its possible to monitor all the VLANS.

  With only one ID I I want to know if it is possible to monitor all my VLAN in the network. I use version 4 ID and VMS MC 1.1.

  If I have to set my internal addresses and those which I define as internal are considered as approved, in the case that I have configure a port in my central switch to monitor all the VLANS in my network and connect the ID to the destination monitor port to sniff all the VLAN, VLAN which I consider as an intern?

  Also, I have switches catalyst 6006 and 6509 with version 5.1 (3) and 12.1 in each case, can I apply for fleeing to take acctions when an attack is detected?

  Is it possible this configuration?

  Thanks for any help-

  I don't know if the ID is used to detect the specific activity you mentioned. You would need to go through our list of signatures to see if it's possible. You can even submit a new assignment and ask this question again.

  As for the actions.

  Cat OS 5.3 should allow you to be able to inject a TCP Reset packets through a span port (requires the parameter enable inpackets).

  In regards to the blocking with Cat OS 5.3, I don't think that this version supports the VACL. You may need to upgrade the version of the OS to chat if you want to block with VACL, and you also need a PFC and an MSFC on the supervisor.

  NOTE: If you have an MSFC making routing you may also block with the traditional router ACL on the MSFC.

  On the IOS running native 6509 (where IOS instead of the traditional CatOS runs on the prime contractor), there may be a problem with TCP resets. I don't know if the port of the monitor (equivalent IOS native span port) will allow the incoming TCP resets. You need to browse the documentation.

  Some versions of native IOS (I think that what you have newer versions) will also allow you to monitor through the capture of Vlan ACLS feature. If the sensor is followed by a VACL Capture port instead of a port monitor then I think that the TCP reset works OK, but I have not tested.

  With native IOS the sensor supports router blocking with the traditional ACL, it does not support blocking with Vlan ACL in native IOS.

  NOTE: The difference between router ACL and Vlan ACL is the Vlan ACL is applied to the vlan and applies to all packages comining and at the exit of the Vlan. While the router ACL is actually applied to the INTERFACE of the Vlan where an IP address has been assigned and only applies to packets routed in or off the Vlan.

  NOTE: Native IOS requires that the master has an MSFC even load the image.

• Customer wants to know all the standard reports available under EBS 11i & R12.

  Hi all

  Customer wants to know all the standard reports available under EBS 11i & R12.

  Is there a document that lists all of the standard reports available under EBS 11i & R12?

  If you have advice or a solution, please update your comments freely.

  Kind regards

  Hi all

  I see notes 561585.1 and then found SQL.

  Kind regards

• Is it possible to know the date and time, when a form has been consulted last?

  Hello
  I use forms 6i. Is it possible to know what form was last accessed by any user?
  
  Concerning

  Only if you implement such a feature. (Perhaps written at a table in the PRE-FORMS-relaxation in a standalone transaction)

• Do you know if the assessment filter fields can be used for reports?

  Do you know if the assessment filter fields can be used for reports?
  I have a filter of assessment field in contacts that he use to capture information relavant contact. Because I thought that we could use it as another list of choice. But when I create a report I can find it in the list of available fields for the report.
  
  Thank you very much
  Catalina Valadez
  Concerning

  Catalina, the fields of the assessment filter is not available in reports. I suggest using a custom drop-down list, or among indexed lists. If this is going to be a key field you want to filter in reports, I suggest a list of indexed choices.

• How know if the router or modem cable is the problem with bad internet?

  I have intermittent problems of internet home.  The internet goes out for very short periods, then back on several times a day. At various periods of time, usually in bunches up.  Then sometimes instead of being down for maybe a normal 15-30 seconds, it could last 5-20 minutes.  And there are also periods of hours sometimes where the speed is VERY slow.

  When he is not at all working, Airport utility looks like in the following screenshot, with the orange Internet and other green devices.  Sometimes, it only shows the Internet icon and light, with nothing else underneath.  If the internet is very slow (and I mean really slow, like minute 2 page load or not at all), everything is green, including the Internet icon.

  

  It is the Charter cable with a modem surfboard, connected to an older Airport Extreme (in mode not wireless) model, which is connected to three aircraft from the airport, you can see in the screenshot.  Everything works very well for 8 years, but these problems have taken place in recent months. I replaced since the cable modem for a brand new, I have reset the Airport Extreme to the factory settings and tried all sorts of other things.

  It isn't the wireless aspect, because I can connect a computer to the ethernet jack and it has the same problems.

  So here's what I want to know: is there a way I can tell if it's the Airport Extreme or if it's the Internet Charter being flaky?  (I know it's not the cable modem because it does the same thing that before I replaced it).  I just want to isolate the problem. I don't want to succumb to Charter calling again, as we think the run around, I'm going to forward all tech would come home, and they never admits to have flaky internet.

  I bought a bolt of lightning to Gigabit Ethernet Adapter so I can plug my Macbook Air directly into the cable modem, without going through the Airport Extreme, but internet is not stay down long enough for me to access, plug it in and reboot the cable modem.   Frustrating.

  Suggest that you connect the MacBook Air directly to the modem, connect the Mac to the Internet and keep an eye on the MacBook Air from time to time for at least one day complete.  A few days would be even better, if possible.

  If the connection remains strong during your 'test', based on other information that you provide as...

  connected to an older model Airport Extreme

  and

  Everything works very well for 8 years

  The first thought that comes to mind is that life expectancy, on average, for airport routers is about 5 years. It's on food, on average, at the start of the descent position.  Momentary grave start occurring, and the drops will increase in frequency over time.

  It is a bet of $20, but you might consider replacing the external power for AirPort Extreme see if that provides any assistance.  This does nothing for the internal power inside the airport of course components.

  http://www.eBay.com/ITM/original-OEM-Apple-Airport-Extreme-Base-Station-power-Su PPLY-AC-ADAPTER-A1202 370810566512.