Is it possible to know if the screen is locked or not?

Similar Questions

• Order of data review screen - how do I know if the screen is rendered or not?

  I have a few screens that share some of the questions. In the command screen - all screens that have an atleast has answered a question is rendered.

  How can I filter screens that are not made?

  I finally have a solution for this. It turns out actually be much more complicated than it should be. The solution below is very technical but should work in the general case.

  The problem

  How to hide screens in the review screen of data that have not been displayed during the interview?

  The Solution

  1. Create an attribute of the screen for each screen. You can do this in OPM by editing screen and press the button 'Create' in the attribute 'screen '.
  2. Change the DataReviewControl.vm template and add the following:

  In the macro '#macro(renderScreenNode $screenNode)' (on line 38) you need to add the following lines

  #macro(renderScreenNode $screenNode)
    #set($screen = ${screenNode.getUnderlyingScreen()})
    #set($screenService = $screen.interviewSession.screenService)
    #set($display = true)
    #if ($screenService.getScreen($screen.getRawId()).getScreenAttribute())
      #set($attr = $screenService.getScreen($screen.getRawId()).getScreenAttribute())
      #set($entInst = $screenService.getScreen($screen.getRawId()).getContext().getEntityInstance($screen.interviewSession))
      #if ( $attr.getValue($entInst) == true)
        #set($display = true )
      #else
        #set($display = false )
      #end
    #end
  

  This code of speed takes a complicated (but as far I could tell necessary) route to extract the value of the attribute of the screen for each screen. If the value of the attribute is true, the form has been posted. However, if the screen is not displayed, the value is null (unknown).

  The $display attribute starts as true, so I'm each screen by default, it is set to false only if the screen has a screen attribute and the value of the attributes is not true.

  The actual display of the screen is encapsulated by a:

  ...
  . Around these, you need to add and block #if ($display)

    #if($display)
      
  
         ...
      
    #end
  

  I hope this works for you

  See you soon

  Frank

  Post edited by: frank.hampshire

• music player when the screen is locked

  Hello.
  Some devices show a practical widget when the screen is locked, but not of compact z1.
  I usually listen to music on spotify and when I received a call, the cell phone showed the widget on the locked screen. Not to mention that I was able to control spotify with the headset control.
  Then I stuck the screen again and it no longer works.
  I tried to find a configuration, but I couldn't.
  Can someone help me?
  Thank you

  Disable or remove the smart key and see.

• Is Camileo S20 - possible to turn off the screen?

  Is it possible to turn off the screen when you use modes Time Lapse or motion detection to save energy?

  Hey Buddy,

  I downloaded the manual to the user off Camileo S20 and searched a little, but unfortunately I can't find any information about turning off the screen when you use Time Lapse or motion detection. It seems that the screen is always enabled.

  But you can connect the AC adapter when recording movies. If you still have the power. :)

• is 10g - possible to know if the report to get the data in the CACHE?

  Hi, experts,
  
  Is it possible to know if the report to get the data in the CACHE (per share on the dashboard page)?
  
  of NQQuery.log?

  Forreging,

  Yes, it is possible to know if a query pulled from the cache to access Oracle answers/dashboards or not.
  If you find the part of the sentence "cache hit on request" within the NQQuery.log against any request, this request did get the results from the cache.

  Another way:
  Also under settings > Administration > manage Sessions if you find "Ref" > 1, which refers the number of times where a cache is used to provide results.

  -bifacts :-)
  http://www.obinotes.com

  Published by: bifacts on November 1st, 2010 22:42

• get a pop up on the screen saying lock shift is enabled or disabled

  I have a windows 7 PC Samsung RV510 and when I hit the caps lock key it does not say whether shift caps lock is enabled or disabled.

  Everything on the screen caps lock is via the software provided by the computer manufacturer.  In the case of may with a Dell laptop, the screen is a function of the software Quick Set of Dell.  I don't know if Samsung offers something similar.  Another option, you can watch, is that Windows 7 has an option to play a sound when the SHIFT key is hit.  Actually, I prefer since I did not look at the screen to be informed that I accidentally hit the caps lock key.  It is controlled via start > Control Panel > accessibility > change how your keyboard works.  (Or if you go to the search box of the programs and files immediately above the Start button and type "toggle", then "Change how your keyboard works")  Once there, but a check mark beside of the "turn ToggleKeys.

• How to store Internet Explorer running when the screen is locked?

  Hello! So, I am owner of a Surface... Yes! Somehow...

  Because Microsoft App Store refuses to give us of Pandora, Youtube and other needed applications, the only way to use these pages is through Internet Explorer...

  (in my opinion, they do it so that someone using Internet Explorer)

  Now, ok, I did that! I search for the pages I need and have pin them at the beginning... Yes, problem solved?

  NO.... The screen, if you don't touch anything, or move the cursor or something, it locks itself automatically after a certain time... and the music and the videos just stop playing.

  Now, when I go to Internet Options, I can't find anything to fix this. Change PC settings or... In customize, where it says lock screen Apps, it gives you the opportunity to choose "the apps run in the background...". ", but Internet Explorer is not available for this.

  Now, someone, anyone... tell me how that's possible! How can I leave Pandora running or a 1 hour running YouTube video?

  What are my options?

  1. setting of the Tablet does not interrupt or stop using the internet explore when the screen is locked... Is it still possible?

  2. the Tablet for only auto setting not lock screen when I use some applications, such as Internet Explorer (again probably not possible)

  3 magically App Store makes it available Youtube Pandora Facebook and other necessary apps (pfffff apparently does not have to spend)

  4. all that have worked for you guys... Any Suggestions?

  These are just little things that have made use of my annoying and incompetent little practical Surface... It's sad when smartphones can be more useful and practical than my Surface... really really sad. This comes from someone who wants this work effective and favourable way to the customer.

  Thank you for reading, for help, for viewing and understanding, I hope that I'm not the only one with this problem!

  > How can I leave Pandora running or a 1 hour

  You could try PRadio in the store:

  PRadio is a third Pandora Internet Radio App for Windows 8 modern.  It allows users to listen to music from the Pandora recommendation service in the background.

  Kate

• My daughter Air2 IPad takes too long to save. It is connected to wifi, connected and the screen is locked.mAny advice?

  My daughter Air2 IPad takes too long to save. It is plugged in, connected to wifi and the screen is locked. Any tips?

  How long is too long? If it lasts for more than a few hours - and even that is too long in my humble OPINION - then something is wrong. Completely backup, because it will not terminate in any case if its been so long, forced to reboot the device and try again.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  This may not work either. The backup may be damaged and you will need to remove and start over. However, its easy starting point and it will not hurt anything. If the backup will not end, he has nothing to lose.

• An e-mail message is constantly on the screen and I can not remove or change.

  original title: E-mail

  an e-mail message is always on the screen and I can not remove or change

  Hello

  1. What mail client do you use?

  2. what happens when you try to delete the e-mail?

  3. you receive an error message when you try to delete the e-mail?

  4. where did you receive this email?

  You can try the following and see if it helps.

  Method 1

  You can try to delete the e-mail in a clean boot state, and check if the problem still persists.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfigand click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Check whether the problem is resolved.

  Method 2

  I suggest that you run an anti-virus from the link below.

  Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-AU/default.aspx

  Hope this information helps.

• Can not see the notification when the screen is locked

  When adding exchange (outlook) account, and because it requires security settings, I'm not in a position more to see notifications when the screen is locked.
  I deleted the exchange account, and notifications are visible when the screen is locked.
  To confirm, I added my exchange account again, and notifications is not visible when the screen is locked.
  I need to unlock to see the notification.
  How to solve this problem to take advantage of this last feature.
  Thank you.
  Saami.

  Topic locked as response has been received and there is already a topic about this.

• The screen brightness setting does not appear in the mobility Center

  original title: how is the screen brightness control does not appear in the center of mobility?

  In the past the mobility of my laptop Vistas Center contained a slider to set the brightness of the screen.  My computer screen is dark and I want to adapt it to a brighter screen.  How can I get my rear screen brightness adjustment?

  Hi bigwaterboy,

  1. you remember to make changes to the computer, after which the issue started?

  I suggest updating the graphics card driver on the computer and check if it helps:

  Updated a hardware driver that is not working properly

  Reference link:

  Using Windows Mobility Center

  I hope this helps.

• My keyboard and the touchpad are locked, does not respond to what it is.

  My keyboard and the touchpad are locked, do not respond to what it is. I activated the screen keyboard on and it works. It is a G71-340US, Windows 7. I think it happened when the battery died while in a Word doc. computer is turned off. Plugged. Turned, password screen appears, could not type anything in the box. The mouse works. My keyboard and the touchpad are locked, do not respond. Restarted, no help. Pulled the battery, no help. At least I can use the keyboard to the screen!  Thanks for your help.

  Did a restore of the system and all is well! Went back 3 days of the last update of windows. I hope this helps others!

• Is it possible to know if my screen colors to the correct color temperature

  Is it possible to know if my Macbook Pro display colors to the correct color temperature?

  When I got it, it seemed hot, so I adjusted... .but how do I know if it is now right?

  Hello there, Chris.

  It seems you are trying to determine how much to calibrate the screen on your MacBook Pro. The following Knowledge Base article provides a few strides and the link to do this in the latest version of Mac OS x:

  OS X El Capitan: calibrate your screen

  The colors on your screen can be changed by many factors, such as ambient light, the position and the angle of the screen and the age of the screen. To take these changes into account, you can set your display to show accurate color using calibrator Assistant monitor.

  Calibrate it regularly to ensure accurate color.

  1. Choose the Apple menu > System Preferences, click view, and then click color.
  2. Click calibrator Calibrate.Display wizard guide you through calibrating your monitor, then creates a calibrated color profile. When the display profile is ready, it is automatically assigned in the color profile of your screen.

  Some screens have additional built-in color calibration and precision features. For more information, see the documentation that came with your monitor.

  Set the color profile of your screen

  If your screen does not look right

• becomes so bad that I don't know if the screen will drain or freeze until I can send it

  I don't seem to be able to use Mozilla for very long because it freezes the screen turns white or it closes and returns to something that I closed.
  I went back to mozilla to factory settings 3 times tried to erase everything that maybe isn't compatible.
  but I'm not sufficiently confident to go away

  What security (firewall, antivirus) software do you have?

  Try to remove all the rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• Pavilion 15-ab269sa: is it possible to replace just the screen on computer pavilion 15 laptop?

  Her half of my screen has become fractured (not physically) and can be used. However, through the half of the screen is fine, I was able to use the laptop normally and it seems that no other part of the laptop is damaged. So I was wondering is there somewhere I can buy a new screen or if it can be replaced at all? Thanks for any help!

  Altogether. I do it all the time. Where do you live (country)?

  This is a LED 15.6 inch 1366 x 768 display and will cost about US $65 if you live in the United States (or Western Europe) and we can provide a manual or a video for instructions on replacing the screen.

  BrightView, HD, flat 809371-001

  Here's one to the United Kingdom:

  http://www.eBay.com/ITM/new-15-6-led-notebook-screen-WXGA-glossy-HD-Panel-for-HP-Compaq-SPS-809371-001-/231673956710?hash=item35f0d80966:gFMAAOxyB9RS1VuQ