Is ample to low menu possible?

Similar Questions

• How to turn off the vibration in the three buttons on the lower menu

  Recently, I got the standard Z5, I turn off the vibration in the three buttons on the lower menu (Back, Home, recent applications)

  I can't turn off the vibration to write, but I Don t know how to turn off the vibration in the menu buttons. The keyboard is the native of SONY
  Help me, that vibrations do not like and they are frustrating for my...

  Settings > sounds and notifications > other sounds

  Chinolyn wrote:

  Recently, I got the standard Z5, I turn off the vibration in the three buttons on the lower menu (Back, Home, recent applications)

  I can't turn off the vibration to write, but I Don t know how to turn off the vibration in the menu buttons. The keyboard is the native of SONY
  Help me, that vibrations do not like and they are frustrating for my...

• HP Elitebook RAM running frequency values lower than possible hardware (factory setting)

  As part of the upgrade of RAM (from 4 GB to 8 GB) on my HP Elitebook 8560W, I did several tests to find out what type of RAM to my PC a. I was surprised that my RAM (Samsung, PC3-10600 DDR3 SDRAM SO-DIMM) runs only on 666 MHz = 6.67 * 99.8 MHz (9-9-9-24 calendar, 1.50 V voltage).

  However, the factory often supposed to be 1 333 MHz. RAM How can I set correct values of RAM clock 1 333 MHz?

  More info: updating my BIOS: 68SVD worm. F.42; 07/15/2013 Motherboard: HP 1631 & Chipset: Intel QM67 (Cougar Point) (B3)

  If you need additional information, feel free to ask me questions.

  Thank you in advance for your help!

  Since your stick of ram is a Double Data Rate (DDR3) as any other RAM sticks of today, its actual frequency still shows 2 times less.  What you see is correct.   In the past, SDRam yielded 1 data at each clock, with DDR ram, 2 the data are transferred to each clock (hz), so the performance is doubled = equivalent to twice the frequency.  Two-channel will accelerate the transfer of ram using two sticks at the same time, but you can still see 666 mhz cpu - z.

  Been built several computers game, when I set the frequency in bios to the right pair, it always show 2 x less, don't worry!   PS.  I have 1600 mhz DDR3 sticks and show 801,3 mhz of CPU - z.

  In ADDITION, if you upgrade your ram, so that they can operate in dual channel, be sure to buy a stick of the same size (4 GB), frequency (1333 mhz), calendar (9-9 - 9-24) and voltage (1.50 V).  Those who should be easy to find.  It is always better to buy Kit with two since they are tested to work exactly the same, there may be difference of manufacturing between brands and models, but it shouldn't matter much if these 4 parameters are the same.  If you buy a lower frequency stick, the other fits than slower.  If possible, buy one of the same brand to be absolubly that they match (Samsung M471B5273DH0-CH9)

  The BIOS * could * be reflashed at a CV not a compatible with your motherboard, but there are a lot of risks for this purpose, up to an unusable computer (motherboard will need to be removed and would need a new BIOS chip, a reprogrammed chip probably welded or a new motherboard).  That's what tells the computer parts, how to work with each other.  Also, your computer will be out of warranty.  You don't need it to be since your ram is working as expected.

  A lot of information here: http://www.hardwaresecrets.com/article/Everything-You-Need-To-Know-About-DDR-DDR2-and-DDR3-Memories/167

  And here: http://www.hardwaresecrets.com/article/Everything-You-Need-to-Know-About-the-Dual-Triple-and-Quad-Channel-Memory-Architectures/133

  

• Studio 2010 website updated Studio 2003 problem the low menu display drop in Chrome browser

  Updated a website originally designed work in 2003 Studio using Studio 2010. Now menu drop downs do not chrome browser display. I tried all the posts on the web and still have not corrected it. My client is angry that this issue takes so much time to fix. Any help would be greatly appreciated.

  Zener

  I would post your question here on the Visual Studio forums

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

• Problem to find the LUT processing log menu drop-down.

  I installed the utility LUT and can see utility LUT in the effects pane. I downloaded a free sample LUT of the Falcon and saved it on my desktop. It is in the cube, MGA and forms of 3DL.

  How can I get the LUT file is available from FCPX. I check the journal dealing with lower menu in "info" and it lists blackmagic, canon and sony but my READ of the Falcon does not appear.

  Any ideas?

  Get you in the "LUT Utility" filter.  Apply it to an element, in the Inspector, it will allow you to load an external file of LUT.

• sensitive menu of condition

  Hello

  I have a question on the menus of ring which can be changed by choosing a condition. It will be something like this: a menu points 1,2,3,4 and another menu that is items are a, b to 1, c and d for 2B, 3 d and a, d to 4. It's a bit like a drop down that is connected to a previous menu. Is this kind of menu possible?

  Hello

  I got your problem thats why I said you can use the menu option. Because in the round, if you use the character. then in jurisdiction treatment it will give you a clue. For ex. If you have connected the second ring of output for the structure of the case, in the structure of the case you will get only the numbers not the charectors.

  but in enum, you cannot dynamically change the values. only you can assign values only editing mode.

  But somehow try this VI.

  It will be useful for you I think...

  >

• Anytime W7 home prem upgrade to profess W7 cannot be rerun on the same machine to possibly fix the errors.

  Computer: HP Pavilion G/1070 us laptop. Original OS W7 64 Home Premium SP1

  15 Aug-2914, I had some freezes and problems of instability and learned on the web that a upgrade type installation could clean debris from its difficult use of several years.  I went on the website anytime upgrade Microsoft and bought an Anytime Upgrade for W7 64 SP1 PROFESSIONAL and installed from the Internet Anytime site. The key to the new system has been inserted automatically and a copy sent to me by email with the reception that I printed.

  The process went well and in the end my initial home screen was displayed. I checked email and tried a few other tasks, and everything seemed fine... I clicked stop, and (as I remember) a stream of file system names began to scroll to the bottom of the screen indicating that they were part of the upgrade process. I turned off the computer.

  This morning, I restarted Windows and experienced some of the friezes original and instability... I reasoned that if I restarted the install of Win 7 Premium and careful I might be able to check updates and fix the problem. This was not possible. The Windows Anytime Upgrade site rejected the upgrade key that I was copying the receipt of Email for my purchase (I tried at least 10 times). I could not find any contact information on the site and I noticed that my received email was sent from an unmonitored address.

  THANKS FOR YOUR HELP

  (1) run chkdsk as follows:

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volume to check the next time that the system/PC reboots,
  Enter: y

  Now, restart the PC.

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php
  Note: Unfortunately now includes a lot of bloat-ware, be very careful when installing remove bloat-ware.

  =====================================================================

  2) run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  = If you are still having problems =.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  Only one solution was either by picking up the Internet
  and removal of SP1 - or a combination of both. Then re-installation of SP1
  Save this method for a last resort.

  --------------------------------------------------------------------

  (C) you get a PIN number with the "Anytime Upgrade", if yes enter the PIN here to obtain a product key: https://windows.getmicrosoftkey.com/

  Support for your product key: https://windows.getmicrosoftkey.com/Home/Support

  --------------------------------------------------------------------

  (D) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (E) if still Anytime Upgrade fails, turn off User Account Control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (F) if it continues to fail, try the following 3 methods:

  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press ENTER to open the memory diagnostic tool open. Click restart now and check for problems. Your computer will restart and will start the diagnostic program. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators systems product keys, this applies also to the VL (Volume License)-MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com

• HP ENVY 14 LAPTOP - cannot change the color of the menu of win 7

  Right now I know it is a HP support forum but I have a HP laptop and desktop and I really hope someone here can help me really...

  Good one a few months ago I bought a HP Envy 14 laptop and I must say that I really liked it. Then a few days ago, I just bought a HP desktop computer (can tell you I'm a fan of HP) and I love it also.

  Here's my problem...

  On my desk, I decided to change her look, so I installed a custom theme (dark theme) and it changes the appearance of windows 7 and changed the color of the lower menu/taskbar of windows 7 in black and I really liked it. I decided to install this theme on my laptop and everything has changed except for the background color of menu/taskbar of windows 7 botom. For some reason any will not change the color of the menu bit matter what I do.

  I tried to go to:

  Panel-> personalization-> change the color of window glass

  and by selecting a different color but not matter what color I select windows 7 background menu/taskbar does not change it remains just the grayish color of say her since I got the laptop.

  Now, why this work on my desktop but not on my laptop?

  There must be a setting on windows 7 that prevents me to change the color of the lower menu/taskbar. Still worse firefox is horrible. I can not change the appearance of firefox, whenever I have try and install a new firefox theme does not change. On my desk, I installed a dark theme for firefox 11 (the Nasa Night Launch) theme and it worked very well but for some reason any on my laptop, nothing seems to work just...

  I really hope that someon can help me with this because it makes me crazy...

  I want to thank you all for your time and help,

  gh0st-HP

  DragonFur, I want to thank you for your time and your answers, you should know that it meant a lot to me.

  After doing a lot of work and trial and error, I finally found a solution to this problem...

  I did a lot of googling and research and what I found is that there are many people out there who are owners of laptop HP Envy 14 who have trouble changing the color of their windows 7 start menu/taskbar or with the taskbar is not not transparent.

  Here are some of the things I tried.

  1 Installing different themse (did not work)

  2. Update driver for ati radeon 5650 graphics card (did not work)

  3 tried to adjust areo ensuring transparency has been activated (did not work)

  4. tried to bios update (did not work)

  5 tried to use a program to change the color of the bar tasks (did not work)

  What I ended up doing is creating a new user to the administrator and when I created this account is a program called "stardock mypaint" come asking me if I wanted to use this program to change the original theme for windows. When I said this software to change the original theme of windows 7, it changed my taskbar to the greyish appearance, it was the same off-white color I had on my account I tried to change. So I went back to my account and I searched for the program "stardock mypaint" and I have disabled this theme and then he changed my windows operating system 7 to an original blue theme but the taskbar was transparent! Then I went into my themes and changed the theme I wanted and my taskbar has changed color and transparency! Needless to say I was so happy.

  I really hope that this post will really help someone else who is trying to solve this problem...

  HP I really hope that maybe you guys can watch this program "Stardock MyPaint" which I think may be for HP Envy 14 laptop computers and allow users to know that the use of this program can affect other issues.

  Isn't funny how the solution to the problem is always the simplest answer...

  I knew there was something in the windows that kept my taskbar to be transparent and changing colors and it turns out it was a program of HP.

  Yet once I really hope this helps someone else out there and I'm hoping that HP employees this will read so maybe they can help each other if someone falls on this problem.

  DragonFur, thanks again for your help...

  gh0st-HP

• "Menu bar Spry" expanding box problem.

  Hello

  I wonder if anyone knows how to solve a 'expansion bar problem', associated with vertical menus bar spry.

  This problem occurs especially in Internet Explorer 10 and 11. All texts and images on the right of the menu spray are projected down to below the lower menu bar.

  The page is displayed in Firefox and Google Chrome 100%-125%, but the same thing would happen if I Zoom in more than 125%.

  The only potential incompatibility problem by Dreamweaver is the "expand the bar problem.

  Thanks in advance!

  Hello Ben,

  Thanks a lot for your suggestions.

  It seems that the problem had nothing to do with a "expanding box problem.

  I managed to solve the problem by introducing

  Michael

• Possible to have a production VM on the host of MRS? Looking for clarification.

  Hi all

  We're building a centre of DR that will contain a single host VSphere. This host will be production 3 or 4 virtual machines on it. Is it possible for this host even serve as our host SRM as well?

  We are trying to clarify some conflicting info on combining production virtual machines on a host that would also be a host SRM. We want to maintain the costs to our DR site as low as possible and we hope that we might be able to accommodate a few virtual machines on the same server as the installation of SRM. Thank you.

  If by "Host of SRM" you speak of the ESX host on your site of DR, so the simple answer is Yes, you can have virtual machines running on this host.  In the case of start you a recovery plan you can leave virtual machines running or power down to free resources.  It is important to understand the load that will be installed on the ESX hosts side of recovery during the failover if you run production recovered plus support VMs.

  -alex

• Zero latency when recording possible? CS6

  I can't get the latency time at an acceptable level in hearing CS6.  When recording I can hear an audible delay when I pull my string guitar for when I hear it playing on my computer speakers.  The latency in Audidion was initially set to 200ms and I've adjusted all the way to 30ms (which is as low as possible as seems) but I still get a delay that makes it too difficult to play with a backing track.  Is it possible to reduce this latency time to zero?

  "Audio equipment" current settings are set at: MS, 30ms, 44100 Hz.

  I'm running my guitar through an M-Audio Fast Track Pro USB interface.

  Release of Windows 7 on board sound via an optical cable to a 5.1 receiver.

  Audition CS6

  A number of things...

  First, visit the M-Audio site and download ASIO drivers appropriate for your Fast Track Pro.  ASIO offers much less latency than MS and, probably more important, in my view, it allows the hearing latency compensation work properly.

  Second, the use of your sound card onboard which is designed for the playback of videos of pit (where the 5.1) rather than low latency recording.  I guess that's why you're stuck with Ms too.  Make your exit through the Fast Track pro and read to the accelerated procedure manual monitoring section.  Your interface allows 'direct material' monitoring for you to listen to your guitar on the entry, and not after a round trip via a to D, your computer conversion, then a D to a conversion.

  I hope these steps help!

• Menu and tab

  Hello
  
  I have a Captivate 3 simulation that I publish to CourseMill. I ran into the key issue of the tab, but fixed it with the parameter tab without welding. However, now when I tab between the screens my menu always fall down. Is there a way to avoid this. It's a bit embarrassing to have lower menu down to each time a user presses tab between text boxes.
  
  Thank you!!
  
  Jaime

  Hello

  I found an answer, and I just wanted to share. This widget has toured and worked like a charm!

  http://www.raisingaimee.co.uk/index.php?option=com_content&task=view&id=79&Itemid=51

  THX!

  Jaime

• HP Compaq 8000 Elite SFF: How to disable speedstep

  Hello

  I'm trying to disable Intel Speedstep on my machine. I heard that it is accessible via the menu of the BIOS, but I looked through all the menus out there, and I can't find anything about this is labelled Speedstep or EIST.

  Can someone help me?

  Thank you!

  Let the speedstep, it is designed to operate as low as possible depending on the application you are using, run prime95 and you will see mounted power 2.3 GHz cpu.  I see no reason to turn it off.

  So really, you want or need to do, in the Power Options, see this:

  http://superuser.com/questions/725755/how-to-turn-off-SpeedStep-in-Windows-7

• upgrade to windows 7 Home premium to windows 7 ultimate

  Hi everyone im wondering if I upgrade from windows 7 Home Edition premium to windows 7 Ultimate edition will I lose the ability to restore the laptop to factory State?

  You should be able to use upgrade wizard level Express in Windows 7 Home Premium using the Windows 7 Ultimate product key.

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Home Premium to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation).

  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

  If you decide to restore the computer to factory in the future State, it won't affect it.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press F8 on the keyboard until the Advanced Boot Options menu appears on the screen.

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  ----------------------------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• update the text with xml, DDL data fields a selection of an identification number

  Hi guys,.

  It should be simple, but I can't seem to find a straight answer.  In short:

  The XML file contains the ID, name, location (so 3 extreme records in the example xml file)

  Form contains a dynamic drop-down list to allow the selection of ID and text fields to display the names of the partners and the location of this ID.  The setting of the drop-down list works fine, however I need to update the associated name and location if different from the other ID's fields are selected.  I guess I'll need some sort of event on the menu drop down update other fields with the name and location of the selected ID, but I don't know enough to have a stab at him.

  Please, please, please help, Im starting to pull my hair.

  James.

  Sorry, looking at him again I could have given a better description of what is happening.

  Have a look at this sample https://acrobat.com/#d=NO5o6NhPTQgSYu3SVoN7rQ and data to go with her https://acrobat.com/#d=jN * pRT4uGg05VU * sGWvjcA

  The thing I should have said and I guess that's your problem is the the Data property, I used in $data. Data.resolveNode (...) must match the item parent of the element of your event if xml looks like

  1

  name 1

  Location1

  It should be $data.events.resolveNode (...)

  Maybe I should have used "itemGroup var = $data.resolveNode ("events.event.» (()_eventId.value_===_«_«_+_xfa.event.change+_»_») "); "in this case, but I try and do the resolveNode go as low as possible.

  Concerning

  Bruce