Is Edge inspect the desktop to the internet connection sharing (for example, VPN) or just the same WIFI network?

Similar Questions

• WES610n two or more on the same WIFi network

  I have a router E4200 running a wireless network with a bridge of WES610n and an extension of Belkin dual-band range (which extends from the 5.4 ghz band), can I connect a second WES610n on the network without interference and loss of performance on devices on a network, on both the bridge of WES610n, the Extender of Belkin?

  You can connect a second WES610 to the network and it will work without interference, but there is probably a speed reduction because more devices will then share the bandwidth network. In some cases where there is interference, the router's wireless channel setting and moving devices can help avoid the interfering signal.

• 8500Aplus, works perfectly with the PC, but it still appears in offline mode with mac on the same wifi network

  I downloaded the latest drivers, more than once. Installation, set up and configuration gain of "successful" messages When I then try to print I get always "printer offline" message on Mac Book Pro running OS X 10.6. Prints beautifully PC running Vista immediately after and network check lists all the devices. Help!

  Looks like there may be a problem with the Mac printing system since it works from Windows System.  It is also not as if there is a network communication problem as it works from Windows system and a network issue would be present on both systems.

  The Mac printing system could have a problem and may need a reset.

  Follow the steps exactly as stated in Mac OS x: how to reset the printing system.

  Once this is done, click on printer HP v.2.9 OS X drivers and install this driver suite that Apple has included for OS X 10.6.

  This will reset the Mac printing system and install the latest drivers having Apple for the platform OS X 10.6.

• When the cellular calls come to the iPad? Both on the same wifi or any wifi?

  If anyone can confirm when the calls show on your iPad? Do when your iPhone / iPad use the same Apple ID and are on the same wifi network?

  Reason why I ask is that I lost my phone and just until its battery died my husband phoned to her. The call came on my iPad and I thought I heard something vibrate (iPads vibrate or could it have been my phone?) while the battery is dead.

  I read in some places that they must be on the same wifi network for the calls to come through is - it true or both do I just wifi?

  They do not need to be on wifi even intranet as the continuity of the iOS feature does not work on the Internet, but only when connected devices are on the same local network. And no, the iPads have no vibrate function.

• ICS 765 error code: Internet connection sharing cannot be enabled.

  Well, I get this message every time I try to share my internet through like an Ad - Hoc or anything else at all. "Cannot enable shared access.  Error 765 ICS cannot be enabled. A LAN connection is already configured with the IP address that is required for automatic IP addressing. Sense, I can't do it like my xbox live or anything. Oh, I use an our phone company wireless internet card and it is installed on the same laptop to my father, and share us through an ad hoc when he uses it, that would be the problem?

  Thanks for any help!

  -Buki

  Copied from Richard to Yahoo answers. It worked for me.

  "ICS in Windows assigns always 192.168.0.1 to the network adapter that is used to connect other devices to customer that you want to share the Internet connection. For example, if you have an Ethernet cable from your computer to the Internet (for the modem or router) and a WiFi adapter that will provide a wireless network for other devices to connect to, then the WiFi adapter will be given the address 192.168.0.1.

  However, if any other adapter (or adapters if there are more than two network interfaces on the computer) using the 192.168.0.0 subnet, then sharing does not work correctly because you will have two adapters will try to use the same subnet.

  The most likely cause is that you have a router between your computer and the Internet, and the router is configured to use the 192.168.0.0 subnet. If this is the case, log into the router and change its subnet. For example, if the router is set to 192.168.0.1 as its address, change it to 192.168.1.1. Restart the router and the computer.

  If you had set up a static address on your computer for the Internet connection, you will need to make a change similar to the addresses of the computer (IP address, gateway address, and DNS address). If your computer uses DHCP to obtain its address, then it updates automatically when you restart the computer. »

  Good luck.

  I just changed my routers ranging from 192.168.0.1 to 192.168.1.1 subnet and sharing works fine now.

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

  Original title: problem with Internet connection sharing

  my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

  in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
  then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
  so, I'm a person answer in this forum
  ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  "DNS server: none.

  I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP

  and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

  I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

  What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings

  But why after I restart my PC, this problem comes...

  someone knows how to help me with this problem?

  Hey, Mimbs,

  You can try the similar thread to the next with a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

  Also for reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• When you try to share my internet connection via AD HOC I get this error: "an error occurred while internet connection sharing was being enabled. the dependency service or group was able to start. »

  original title: cannot share internet

  I shared my internet via ad-hoc, using my wifi in my laptop running vista 64-bit. It just stoped working and now I get a message saying

  "an error occurred while internet connection sharing was being enabled.   the dependency service or group was able to start. »

  Hello

  You can view the article in the Microsoft Knowledge base and check if it helps.

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Let us know if you need more assistance.

• Can someone help me with my problem on the Internet connection sharing?

  I have a LAN wired connection but no wifi capability. I managed to share the internet connection from my pc to my phone by using the "Internet sharing connection" using the usb cable and the first day, it works fine and I can use my phone for internet access. Unfortunately, the 2nd day I can't connect and it says "internet is not available.

  I am currently using windows 7. I hope some of you can help me thanks.

  

  It is on my pc and it says now no internet access. I enabled the "allow other users of the network to connect to this computer" as what I said the first day, it works very well.

  Hello Fritz,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted network drivers or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Use the steps described in this article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

  Additional information:
  Using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows/using-Internet-connection-sharing#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Internet connection sharing: "Bluetooth network connection" does not appear in the list "Home Networking connection."

  Hello.

  With Windows 7, I want to share the network connection Wi - Fi with Bluetooth through PAN (Personal Area Network).

  When there are several connections in addition to Bluetooth after opening "Share" tab, I see these connections in the "Home Networking connection" list, but there is no Bluetooth. Then, when there is no connection in addition to Bluetooth which I can share with, there is no tab "share."

  Equipment: laptop Samsung NB30:

  • Broadcom BCM2070 Bluetooth 3.0 + HS USB Device with the driver PAN ('Bluetooth device (Personal Area Network)") provided by Samsung: Microsoft, version 6.1.7600.16385, 21.06.2006

  As I assume there should be means to somehow add "Bluetooth Network Connection" to a list of connections that can be internet shared with.

  Also, when I tried to fix this problem manually, other questions are raised:

  • There is really no Thoubleshooting guide for Internet connection sharing in Windows 7? I see this document on the site "Microsoft Support" for Windows 98SE, Windows XP - but not Vista and 7.
  • When I'm stuck to the administration of the system to the GUI, there is good decision to guarantee a target with the CLI. After searching a command line installation Internet connection sharing, I see no guides for this - only something likehttp://forums.devshed.com/windows-help-34/enabling-ics-under-command-line-89499.html . Is there really no way to set up ICS by command line and I'm forced to use complex GUIs?

  So, please help me solve problem BT PAN ICS. But if you reply to other questions, it will also be interesting to read.

  Hi LeoniusLeonius,

  Here are a few articles using Windows Internet connection sharing (ICS) you can do refers to.

  Using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  Set up a shared Internet connection using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Change the settings for ICS (Internet Connection Sharing) Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

  Sharing an Internet connection between multiple computers

  http://Windows.Microsoft.com/en-us/Windows7/sharing-one-Internet-connection-among-several-computers

  Change which computer on your network connects to the Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-which-computer-on-your-network-connects-to-the-Internet

  See if one of the articles will help you in fixing the issue.

  Any sharing via command line for internet connection, unfortunately there is no command available to do.

  Hope that answers your query.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I connect my netbook to the printer on the same wireless network?

  My home wireless network is well established and includes a wireless printer.  I'm usin my HP netbook now and for the purposes of the internet, it is connected to the same wireless network.  However, I can't the netbook to detect the wireless printer so that I can install it.  Help, please.  Thank you

  It is often easier - especially with the HP printers - to launch the installation CD for the printer to the new computer and let the installation program find the printer for you.  (But I forgot... your netbook is not a CD player.)  You could try to copy the files from the printer installation CD - if you have a CD, a USB key and use it to install the printer.)

  I support this.  HP drivers to connect to printers more easily when you allow the installation of the driver detect the printer.  I had several HP devices and their installation is smooth when I do that.

• Anyone with the problem of not show apple tv on the same wifi to connect the new application remote control (with the last operating system both on device)?

  Tried to connect the new (launched in July 2016) Apple Remote app, I'm not able to add the Apple Tv from my iphone (5 c), because it does not show apple tv to connect even on the same wifi. I use the latest os on iphone and TVos 9.3.3.

  9.3.3 isn't the latest version of the software for your phone or your Apple TV.

  Try the following steps for the Apple TV 4, check if things work after each step if necessary, before you try the next.

  1. Restart the Apple TV (settings > system > restart).
  2. Restart the Apple TV by removing ALL cables for 30 seconds.
  3. Restart your router. (Also try to remove the power cord for at least 30 seconds)

• When I try my ipad FaceTime I get this massage iphone is not available your phone must be on the same WiFi that this ipad to make a call

  When I try my ipad FaceTime I get this massage iphone is not available your phone must be on the same WiFi that this ipad to make a call

  In your FaceTime settings, what you defined as "Caller ID"?  If you have set up the continuity (continuity use to connect your iPhone, iPod touch and Mac - Apple Support) and you have the iPad set to use your iPhone phone number to initiate calls, then you will need to have your iPhone and your iPad connected on the same wifi ntetwork.

  If you set the iPad caller ID to call from, for example, your iCloud email address, then this message should disappear.