Is in any way to batch & quot; Let smoothing & quot; on the images?

Similar Questions

• Will be shooting the camera any way hurt Sun Peaks - e.g. to burn the sensor?

  Will be shooting the camera any way hurt Sun Peaks - e.g. to burn the sensor?

  It depends on how you shoot the Sun.   You're focusing a lot of energy in the body of the camera, and this can generate a lot of heat.  I have a friend who observed with a safe solar filter attached to its scope... but another Member (unbnownst him) not clipped the front cover from the dust of its solar 'finder' scope.  When he did the scope at the Sun, he immedaitely broke the sons of the cross in the finder and in just a few seconds he burned a clean hole in the rear Cap (imagine if your eyeball is trying to address the issue.)

  I put a solar filter on my 300mm f/2.8 to shoot the partial eclipse in last October.

  

  

  The filter was made by Thousand Oaks Optical.  These filters are really intended for use in the put telescopes can be put on the camera lenses.  For a filter to be safe for the human eye, it must dismiss 99,996% of the Sun's energy.  These filters actually block 99.999%.  They come in glass, a film 'RG' and ' Noir '.  Film noir is recommended for use with camera lenses, because the glass and the RG film resemble an opaque mirror and the 'mirror' like finish can cause undesirable reflections in the lens of the camera.  The 'black' movie will eliminate (or certainly reduce) all reflection.

  There are a number of companies that manufacture solar filters - for the most part, you will find the latter at companies that sell telescopes (e.g., Oceanside Photo & Telescope (OPTcorp.com) for example.

• Is there a way to batch process (automatic basic tone) of the groups of photos in Lightroom?

  Is there a way to batch process (automatic basic tone) of the groups of photos in Lightroom?

  To develop, select all. Replace the Sync "Auto-sync" button, and then click Automatic.

• Any way to separate a gradient in illustator on the menu color chart color chart?

  Hi all

  I'm working on a project in Illustrator and I used as a starting point for something one of the gradients in Illustrator. I changed since certain colors in the gradient to fit my desired color scheme, and I now want to use certain colors in the gradient on other objects in the design for a color matching. I know that I can look at the values of the nuances in the gradient and create a new shade and manually enter those same numbers, but I wonder if there is a faster or easier way? I have had this happen before and I'd love to know an effective shortcut to time. I want to do ideally is to be able to tell Illustrator to create/send the stages of individual color in the gradient to the nuances of documents library. It's okay if she sends all colors at once, or if there is a way to drag or move them one at a time in the library. Is it possible to do other that manually re-create the color by the number? Again, just to clarify, I don't want to make a single shade of gradient in the library, I want to create a sample for each color in the gradient (i.e. a gradient with 3 color stops would create 3 shades of each in the shades of color of the document library). Any help would be greatly appreciated. I feel that it is probably much easier I have doing it, but I can't find anything. Maybe I used the wrong terminology in my research? Thank you!

  You need 3 pallets open: Gradient, of shades and colors.

  In the palette degraded: adjust your gradient as you wish, select one of the steps of color or make a new stop at the color that you want to keep.

  You will see the selected gradient color in the color palette.

  Drag the color from the palette of colors to the Swatches palette.

  Simple like that :-)

• The most easy way to batch rename identification labels according to the order in ascending order?

  Well, since the managers of these companies have their greedy heads their asses as usual, we can not control our MP3 file name and are limited to ordering only using identification tags.

  I have a book audio mp3 "Title" ID tag entries are not in a sequence in the growing alphanumeric order, so the order is completely f | _ | cked when I load it on my video.

  I have two applications that can modify the package ID tags: MP3Tag and the sponsor.  I want to change the 'Title' tag for a series of increasingly more simple (i.e. the of first file "title" tag will be changed to "01", the second file "Title" tag will be changed to '02', etc.), so that my stupid Clip will play files in order that he would play them if it was designed intelligently.  It's a real puzzle about how to proceed.  Can anyone tell me, link me to an explanation or simply give me the necessary script?

  Thank you

  Edit: stupid POS won't let you even curse, and even less to order your files in an intelligent manner... a managerial class who absolutely brainless we have some amazing that the socioeconomic conditions are in the shape they are in

  
  

• Just finished typing the long letter, somehow affect key on the keyboard and totally lost it all. Any way to recover?

  Just finished typing the long letter, somehow affect key on the keyboard and totally lost it all. Any way to recover?

  original title: help by email

  You don't mention your e-mail program, but the answer is no. Just to be sure, check the drafts folder and the "sent" folder. You may accidentally saved or sent.

  If you are using Windows Mail, whenever you want to type a long email, once you start it, it save in drafts, (file |) Save or Ctrl + S) and continue from there. Every so often, save it again to update what you just typed the recorded message.

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Any transfer on a drive hard new - what is the best way?

  Here's a question simple and straightforward, I hope. I currently have two internal hard drives:

  • C (IDE): OS (Win7), programs
  • F (about three times larger than C, faster, SATA): for most of the multimedia stuff

  (And some external and a dvd burner, which should not be relevant to this question.)

  I ordered a new hard drive, which will take over old job of the F drive. Once I have install and F empty on it, I want to move everything that is currently on C for which is now F and the new C drive I start and run Windows from. (C would also get a new drive letter and would only be used for backup purposes).

  I much prefer this without having to reinstall Windows and all my other programs, and without investing in expensive software of type Ghost I would probably use only once every two years or more. I also prefer not to have to partition F, although I'll do it if necessary.

  What is the best way to do it?

  Windows 7 image and move it to the new hard drive

  The only way to avoid reinstalling programs is in the image of the player. Connect the new drive as a slave (if IDE), then partition the new drive, so it has two partitions (or more if you want) - the last partition being slightly larger, then the amount of data on your current hard drive. Also, make sure that the partition you are moving that Windows 7 is greater, then the current partition is.

  Make now a picture of your current hard drive with either programs below and save it to the last partition on your new drive. If you have the recovery of 100MB partition do not forget to include that. Then restore the image of the partition that you want Windows 7 installed-you put in place the same as long as your current drive, and you may need to remove/change the partitions that you have done.

  Both programs are offered free of charge:

  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.html

  Remove the old hard drive and see if a new start, if it is not:

  Try to repair the Installation of Windows 7

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. click on the link to repair list system in the System Recovery Options recovery tools.

  More information and a how to guide:
  http://pcsupport.about.com/od/toolsofthetrade/SS/Windows-7-startup-repair.htm

  If this does not solve it:

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD. If you are prompted, press any key to start Windows from the installation disc.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. Select command prompt and try the following commands (one command might work, or you may need to use several commands according to the exact problem):
   
  Bootrec /fixMBR
  Bootrec /fixBoot
  Bootrec /rebuildBCD

  Note: there is a space before the /.

  Space - increase free hard drive space

  Before taking the free picture of space hard drive if you want.
  The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
  2. in the drives list, click the drive you want to clean, and then click OK.
  3. on the Disk Cleanup tab, select the types of files to delete.
  Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
  4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

  Reduce the amount of space allocated to system restore.

  1. start--> panel--> system and safety--> system
  2. then click on the "System Protection" link located at the top left.
  3. in "system properties? window, click the tab "System Protection".
  4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
  5. now, click the "Configure" button to change the settings to restore "disk space".
  6. move the slider to the left to reduce the amount of disk space, that System Protection can use.
  7. click "Apply" and then the "OK" button after setting the disk space.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

  My O.S. is W.7. 32-bit.

  Before, I recently upgraded to XP and using MS Word 2007, I have a (short) Sound Clip of pre-registration<60 secs. )="" and="" then="" insert="" it="" into="" my="">

  A small icon that looks like a speaker appeared on the Document and that the beneficiary would have left click on it to hear the recording. The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

  Is this even possible or has Microsoft taken a step backward here?

  I'd appreciate some help here. Thanks in advance. Mech-Tech.

  Original title: Sound Recorder

  If I've understood your problem, try this. Create a shortcut to "soundrecorder /file outputfilename.wav" (without the quotes).

  Then start soundrecorder via this shortcut and start and stop the recording, it will save so (hopefully) as a wav as before.

  I think the problem is, W7 soundrecorder, by default, saves to wma.

  If not, try a 3rd free part program such as Audacity (which seems like overkill, but should do the job).

  I hope this will help.

• Who need way to CS6 download file for use with the product key that I let go computer breaks down only.

  Martine is a copy of what happened before you ask a question, in the case of any use:

  Do you want to now support the CS6 file that I can download so I can use the product with her key?

  Thank you

  Ronald Stein

  De : Adobe < deleted by the moderator >
  Sent: April 14, 2016 15:39
  To: Ronald Stein < deleted by the moderator >
  Topic: Transcript of your chat

  For additional help, contact us at the http://helpx.Adobe.com/contact.html

  General information
  Cat start time	April 14, 2016 10:18:46 CEST
  End of conversation	April 14, 2016 10:39:06 AM IS
  Duration (time real cat)	00:20:20
  Operator	Abdelmouneim

  Transcript of the chat

  info: Thank you for your patience.
  
  In the meantime, you can try our community forums where experts are available 24 hours on 24, 7 days a week
  
  
  info: now you are chatting with abdelmouneim.
  Please do not close the discussion window or browser tab because it will end our chat session.
  Abdelmouneim: Hello! Welcome to the Adobe Customer Service.
  Abdelmouneim: I'm reviewing your question. Please stay on the line and do not close the chat window or browser in order to ensure that our chat session is not interrupted.
  Abdelmouneim: as directed by your submission of cat, I understand that you want to have the serial number for cs4. Is this correct?
  Abdelmouneim: are we still connected?
  Ronald Stein: so I only now and do not cloud use yet, so asking this way for you to find my file to see if I had CS6.
  Abdelmouneim: Thank you for the information.
  Abdelmouneim: Please allow me 1-2 minute (s) to review the details of your account.
  Ronald Stein: do you need my e-mail address and possibly password?
  Abdelmouneim: No, thank you
  Abdelmouneim: I am able to see the serial number for Cs6 in your account, please sign in control.
  Ronald Stein: I do not understand what means 'please connect the control'?
  Abdelmouneim: no problem, I will guide you.
  Ronald Stein: Thank you
  Abdelmouneim: step 1-to view the list of your registered products and their serial numbers, go to the accounts of Adobe and sign in using your Adobe ID and password.
  Abdelmouneim: Are you connected?
  Ronald Stein: . I found impossible to do - that's why I'm talking to you. Please give the link I couldn't find,
  Abdelmouneim: , I'll send you the serial number.
  Abdelmouneim: Please let me 2-3 minutes.
  info: your chat transcript will be sent by < deleted by the moderator > at the end of your cat.
  Abdelmouneim: Please check your Inbox.
  Ronald Stein: which will take at least 10 minutes, as it has been like this for days now!
  Ronald Stein: I still keep this connection open as well after I received your email afterwards? He will give Details of the CS6 if I?
  Abdelmouneim: Okay, please check and let me know.
  Abdelmouneim: you can contact us again if you face any issue, I'll keep the case open.
  Ronald Stein: while I myself can this disconnect now?
  Abdelmouneim: , Yes.
  Abdelmouneim: is there anything else I can help you?
  Ronald Stein: Thanks for your help so far! À.
  Abdelmouneim: Please contact Adobe.  We are available 7 days a week, 24 hours a day. Bye!

  Hello

  You can find your series here key https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

  Find the link to download here: https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  Let us know if this helps!

• Using Acrobat Reader XI: when you scroll the document .pdf, always a jump irrating on a restricted page.  Any way to smooth scrolling across borders?

  Any way to smooth scrolling beyond the limits of the page in Acrobat Reader?

  Hi mikeg57377139,

  Open Acrobat, go to the menu view-> Page display & activate scrolling.

  Let me know if t help.

  Kind regards

  Nicos

• Is there a way to 'batch' record as very? We have a customer who regularly sends files without all the embedded fonts. To clean the files for digital printing, save us as Postscript and pass them through Distller. "Save as Postscript is most of time consu

  Is there a way to 'batch' record as very? We have a customer who regularly sends files without all the embedded fonts. To clean the files for digital printing, save us as Postscript and pass them through Distller. "Save as Postscript is the longest part of the process, then I would be able to automate it.  Any ideas?

  This is the worst absolute way to embed fonts for PostScript through deletes dynamic transparency, color management, bookmarks, hyperlinks, etc. Yucck!  You are in many ways to ruin the files, do not clean them.

  Acrobat Preflight has a correction for embedding fonts. Takes only a few seconds per file PDF. And if you have a bunch of these files, you can create an action to do this.

  -Dov

• My update seems to be stuck to install. Any way to stop it and try again?

  My update seems to be stuck to install. Any way to stop it and try again?

  MY update is also at a standstill.  I turned the computer and disable several times, but nothing works.  Tried to start in "safe mode", but which does not work either. Anyone have another suggestion?

  IMac, mid 2011

• Any way to change the screen, keyboard split in OS9.2 version? I hate it

  Any way to change the screen, keyboard split in OS9.2 version? I hate it

  Split keyboard is purely optional. You probably activated by accident.

  Settings > general > keyboard > turn off the keyboard Split option, so it does not happen.

• Have 3.6.28 like my boyfriend, hate v4 layout and refusing to update. Today, that he found his update automatically. Any way I can avoid this cruel fate?

  When its automatically updated to 4 against his will, he lost everything... cookies, bookmarks, history, etc. He is also seen extreme lagg now and everything is so slow for him, especially selected bookmarks... If it moves the mouse over the list and rapidly down the highest point is unable to follow and it bounces always up and down trying to catch up for a while after that it stops.

  I really want to share this horrible fate, I love my FireFox 3.6 and use it over other browsers. I don't want to just lose and be forced to this provision of the terrible version 4, if I was I might as well switch to Chrome when I start again from scratch, because it is at least a bit more tolerable (though of course less than FireFox 3.6) design.

  Is it all, ANY way I can avoid this and not have my torn 3.6 away from me as my boyfriend did?

  in the Options window > advanced Panel > Update tab > Firefox updates > CHECK never check for updates (not recommended: security risk), click OK to save, exit firefox and restart.

  https://support.Mozilla.org/en-us/KB/options%20Window%20-%20Advanced%20panel#w_update-tab

  BUT don't forget not 3.6.28 is out of date, see: http://www.mozilla.org/en-US/firefox/all-older.html

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.