Is is possible to access channels from a database in labview with NI USB 8473 s

Similar Questions

• Learn how to connect to internet from pc to mobile phone with a usb cable

  I want to know how to connect to internet from pc to mobile phone with a USB cable

  'S called it tethering.

  1. Search for this term in the manual of your phone.
  2. Search for this term in the contract of your phone network operator because not all telephone network operators allow tethering.

• How to recover from the failure of a with ESXi USB flash drive?

  I have ESXi 5.5 running on a 16 GB USB flash drive.  The system itself has a RAID card and drives mirrored where all virtual machines are stored, so it seems to me that a critical point of weakness is the drive itself.  If die ESXi itself running flash player, is there a procedure to recover the virtual machines on the disks?  Or should I keep a backup of my drive as well?

  1. How to restore the operating system assuming that the flash drive fails? If I reinstalled ESXi on a new drive of the same thumb, would see the VMware VMs existing on the hard drives of the server? Or is the process of discovery of the relatively painless existing virtual machines?

  If your flash drive goes down, will not be a problem that you have your virtual machines without danger on the separate data store in the locally attached storage drives. all you got to do is to reinstall ESXi host, he will be happy to see the existing VMFS data store and browse this data store where are stored the re-save you and virtual machines in the inventory.

  See also changes following KB to make the backup of your ESXi as operating system configuration and when you change the configuration at the time of the failure of ESXi, you don't have to worry about re-configuarting it

  VMware KB: Backup and restore configuration using the vSphere command-line Interface and vSphere PowerCLI ESXi

  1. How can I maintain redundancy for my USB failure? Can I have two drives connected and automatically backup flash / mirror the first hard drive to the second?

  This is not possible (I never tried myself) If you use an external flash drive, but let's say that you have any material to the specific provider giving this feature as

  DELL IDSDM http://www.dell.com/downloads/global/products/pedge/en/poweredge-idsdm-whitepaper-en.pdf

  or another supplier giving a similar feature, then it is quite possible to mirror. Otherwise, the best option is take config. backup using KB, I mentioned in the first answer.

• Export data from the database Table in the CSV file with OWB mapping

  Hello
  
  is it possible to export data from a database table in a CSV with an owb mapping. I think that it should be possible, but I didn't yet. Then someone can give me some tips how to handle this? Someone has a good article on the internet or a book where such a problem is described.
  
  Thank you
  
  Greetings Daniel

  Hi Daniel,.

  But how do I set the variable data file names in the mapping?

  Look at this article on blog OWB
  http://blogs.Oracle.com/warehousebuilder/2007/07/dynamically_generating_target.html

  Kind regards
  Oleg

• Is it possible to organize the bookmarks into folders? Is it possible to import bookmarks from another browser (by default) (not counting the native browser or Chrome)?

  I have some Favorites in my default browser (browser CM) and not savor the idea of manually re-create all. I also want to keep them organized by categories. -File system is very useful.

  The model of authorisation for Android does not access other apps to their settings. Chrome and the stock Android browser have some special access rules that allow to see the bookmarks of other applications. Also, is it possible to import bookmarks from Chrome or the stock Android browser.

  Bookmark management can be done in Firefox via Firefox Sync Office. See https://support.mozilla.org/en-US/kb/how-do-i-set-up-firefox-sync

• Read VeriStand channel from inside the custom device that are not part of the custom device?

  Is it possible to read VeriStand channels from within a custom device VeriStand (RT Driver) that are not part of this custom device?

  For example, suppose I want to be able to configure a channel in my custom device to always be twice the value of a string of material that my user selects (I know, better/more simple ways to do this, but this is just a simple example ).  Can I do this from the device custom without programmatically create a mapping of the system? (I've done this before and it is messy and VERY prone to error of the user).

  Thank you!

  good point

  the channel ID (U64s) are not the same in the engine config of vs. Instead, you must set 'references to dependent item' in the config and then get these references in the engine.

  See the source jarrod linked, which makes it

• is it possible to redown load from microsoft and use my original key to validate thnx paul t instead of the original operating system was 32 x 64 bit

  I loaded Windows 8, which was not working properly could not recover my windows 7 has requested a second reinstall windows 7 again, but it installs only 32 bits instead of the original operating system was 32 x 64 bit is possible to redown load from microsoft and use my original key to validate thnx paul

  Redownload or resume

  Method 1:

  When you buy Windows 8 an email with the download link and purchase details will be sent to your email address that you use to purchase / register your product, you can simply access email and use the download in link to the re - download to your computer.

  Method 2:

  Here are the links that will help you to download Windows 8.

  Note: Please refer to option 4 in the first link below and download the correct version of second link and use the product key of windows 8.

  http://Windows.Microsoft.com/en-GB/Windows-8/buy-Windows-8-online-FAQ

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  Hope this will help you. Please do not hesitate to meet any other assistance and we will be more than happy to help you.

• Is it possible to access an ADF of MAF application

  Hi all

  I just started to learn Oracle of the MAF.

  Is it possible to access an ADF application that has already been deployed on a CRG oracle weblogic Server?

  or do we need to recreate a similar request just scratching by using features of the MAF?

  Kindly help me with the different possibilities.

  Siva

  Make sure that you add the server hosting the ADF application to the white list of the servers that can use the app to the MAF.

  Oracle ADF 11 g, Oracle of the MAF and developer of Java/J2EE applications: display of Images of the remote server OracleMAF

  Also, make sure the ADF Faces app URL is accessible from the browser on the mobile device on which you run your application of the MAF.

• Is it possible to access the Data Domain to retrieve records?

  Hello

  I'm using OEID 3.1.

  Today, I was asked if I know not if its possible to access records stored in the domain of data to recover.

  In fact, the question was if there is a way to access the "base" of the field of data to recover the data from there.

  Is this possible? Is there a way to recover the data in the domain of data stored?

  I think only it would be possible to retrieve data but without the column information, only a simple retrieve information by placing a table of results and make an export, but maybe there is a way to make a retrieve data as an export sql, including information on metadata, etc.

  Best regards and thanks for the help.

  Of course, you call the web service server short conversation

  http:// :/short-server/ws/conversation /? wsdl

  with a content application like this:

  http://schemas.xmlsoap.org/SOAP/envelope/"xmlns:ns ="http://www.endeca.com/MDEX/conversation/3/0"xmlns:typ ="http://www.endeca.com/MDEX/lql_parser/types">" "

  en

  RETURN ResultSet AS

  SELECT Attributeto, attributB

  WHERE attributB > 5

  a you will receive a response with content details.

  Is that clear or you need more details?

• Is it possible to access Dreamweaver cs6 with my creative cloud membership? My teacher uses t

  Is it possible to access Dreamweaver cs6 with my creative cloud membership? My teacher is using that old version and it's hard to follow his tutorials because cc is so different.

  Yes.  Remember to follow the INSTRUCTIONS VERY IMPORTANT or it won't work.

  CS6 direct downloads

  http://prodesigntools.com/Adobe-CS6-direct-download-links.html

  Once you download the trial version, you can activate it with your official cloud creative log - in credentials.

  The version of the CS6 creative cloud (12.2) is a little different from the boxed version (12.0) your instructor is using probably.  Some menu options have changed.  See the link below for more details on what's new ~

  2013.html http://helpx.adobe.com/Dreamweaver/using/Whats-New-Dreamweaver-Creative-Cloud-Release-Feb-

  Nancy O.

• Bug? Tags accessibility conversion from Word 2007

  This seems to be a minor problem, but it is one that could create a lot of frustration for a disabled person using a screen reader to read tabular data in a PDF document.

  As you know, Acrobat plays well with applications Office allowing users to create (structured) tags, accessible PDFs from MS Office files. I just created a simple docx file with a (attached) table, and when I converted it to PDF, I noticed a difference in the tags that it creates from the conversion of Word XP. As see you in the Word file, the table is very basic, but one of its column headings is divided into two cells. It's actually a very common technique for the presentation of the data in the table. To automatically mark as cells of table header < TH > header lines in the PDF file, I put the first two lines of "Repeat header lines."

  Conversion from Word 2007 with the "Save as Adobe PDF", or any other method that uses the Acrobat plugin, creates a tree of tag that is missing a < TH > tag. I found the problem when I was testing a file with the JAWS screenreading software. Using the JAWS "active cell" command (Ctrl-Alt-Numpad 5) to announce the column headings. It reads the wrong header for the active cell because of the < TH > missing. So, in my example file, he announced $2 and $5 as amount 2010 rather than 2009. This could be quite confusing for a user, to say the least screen reader.

  Then, I compared the result to the new feature "Save as PDF or XPS" from Word 2007. This feature of the tag of the file properly and header to the height columns.

  Compare the joint "save-as-adobe - pdf.gif" to "Save-as-pdf - xps.gif. Note the < TH > tag empty (but necessary) in the image of the latter.

  As a validation test, I had a colleague with Word XP the file convert. These tags were right too. So this must be a problem between Acrobat and Word 2007.

  Someone at - it further comments on this? I'll conduct accessibility training and at the present time, it seems that the use of the Word 2007 conversion feature is the way to go.

  I'm using Acrobat 9 Pro.

  Thank you

  Joe

  Hey Joe,

  I feel your frustration. For any organization that needs or wants to commit to providing accessible information online
  a serious logistics problem raises its head. PDF, HTML, what is the right way to do (and it's possible)
  requires more resources (training, knowledge, hardware, software, changes to work flow, perhaps some staff members more).
  Is not "work smarter with less & pump more" in this place.

  Yes, it is useful (and necessary) for 'being one' with the 'paragraphs' - WCAG 1.0 - WCAG 20 S508.
  However, as soon as someone starts to provide PDF files which must be 'accessible' the first, most important reference is ISO 32000.
  The references of PDF from Adobe, which preceded the PDF becomes an ISO standard are useful; but ISO 32000 is the norm.
  In this documentation, there is a full discussion of what he * needs to be done to provide an accessible PDF.
  Without a good understanding of this content, other information tend to bring about a de-escalation of focus opacity, which can
  contribute to conceptual errors important view accessible PDF.

  Entry blog of Leonard Rosenthol AUC provides a link to the ISO standard permitted version Adobe (free) of the ISO 32000-1.
  http://www.acrobatusers.com/blogs/leonardr/Adobe-posts-free-ISO-32000

  You will find additional information useful in these two documents:
  (1) - PDF Accessibility QAnywhere (from the Acrobat SDK add-on)
  https://Acrobat.com/#d=J7bWW4LvNoznh8fHCsfZDg

  (2) - reading the PDF through MSAA
  https://Acrobat.com/#d=uIOvkVTP74kag3bXFJLIeg

  On the JAWS - Yes, very used. However, not the exclusively used on demand.
  If I use Windows Eyes, NVDA, a braille reader or something else then what?
  JAWS * not * defined 'is available '...

  Re: (1) (1)
  "Match and if...". »
  Consider "Stop front right on red".
  '' Respect '' is stop on Red - turn right
  'Intent' (aka usability) is stop on Red - Look Good to come from traffic that has the right of way - performance - when clear, turn right.

  But, at least, we don't talk of the "left on red" 8 ^)

  Re: (2). (2)
  Just an observation. A defective product that claims to be 'everything' may enter a sticky wicket entities (individuals/businesses).
  Put a high volume of defective products on its same does increase the probability that a "shadow".
  Quantity replaces quality just isn't a precursor to success.
  Target species - and national judicial action class action that has been taken against him with regard to the "accessibility" of services information online.
  Resolved now - see the web site of the NFB.

  Re (3) (3)
  Ah, but what would say Judy justice or judge Marily?
  Efficiency does not provide a product of the "whole".
  I doubt it will ever be a "one-click" seamless between the dominant products of one of the software houses.
  They are competitors intense. That it is not others providing provide a product of 'whole', right?
  For example, if the organization wants to 'make accessible PDFS' label then it pays transport costs - Adobe Pro, training, workflow appropriate, etc.
  which allow the delivery of PDF files meet the standards to which formed a well containing the tag output is PDF (accessible is a subset of this).
  There is no other way for PDF.
  If this cannot be done so there are always HTML as an acceptable method (for some it's the way privileged and only 'true').

  However, HTML is 'right' for accessiblilty is just as demanding in its own way.

  With each version of TA / dot release, JAWS - Windows Eyes - NVDA & others hone in on using PDF ISO 32000 Standard closer.
  This means that if you deploy "accessible" PDF, you will need to provide PDFS who live ISO.
  Do not forget that the paragraphs of S508 began when, in fact, HTML was 'it '. In terms of software that has been there are geological ages.
  For contemporary AT effectively analyze the PDF, the PDF file must be a PDF containing the tag well trained with a format/layout that reflects a logical hierarchy.
  Creation of all that it should start in the environment of creation with the author of the content.
  PDF post-processing output then ensures that the elements (tags) PDF are of the correct type, have the required attributes, etc..
  Without this, AT will not be able to provide the use of effect for the end user of the PDF file.

  So, for AT correctly 'work' the PDF file, elements of * must * have set the Scope attribute, values of row value and scope of column defined, etc..

  Scope, line Span, range column, ID of the Table and headers must be added in the framework of the post-processing in a PDF using Acrobat Professional.
  An alternative is the plugin Netcentric CommonLook for Acrobat Professional. What it does, Acrobat Pro can do; However, the CommonLook
  provides a robust user interface. Disadvantage: some 1 k $ per seat is not 'cheap' and it has a * steep learning curve * (Sitka Pass?).

  Two related table resources run this AUC thread (in post 3 and 4). They can be of some use.

  http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=23178

  When the "smelly things" feeds into the Lair of the fan, it is prudent to not be directly downstream, huh.
  Consider the target and the situation, in which they began.
  Consider delivery of the PDF accessible agencies fedgov or stategov.
  They won't be in front of the fan if the ease of use of PDF files becomes a problem.
  It will be rather those submitting. After the Agency said "accessible".

  Better to slow down and right or loading ramp of resources in support of "Annex" as to the stake themselves as someones 'feed' tomorrow, no.?

  Ultimately, PDF, HTML, or any 'format', accessibility is the ease of use + compliance.

  Needed improvements in the professional development and training, software/equipment, * time *?
  Yes. But, all of this boils down to 'where the rub the road' - what tires are you on?
  It can be done. I do a little bit at a time all day. Often, this is what it takes.
  Products to be delivered are provided; but, with no bad labeling and advancement is identified, celebrated and everything continues until the
  the 'road' is filled correctly.
  Won't wash outs, bridge collapse or what not tomorrow .
  (But then I'm a fan of "Holmes on Homes", which can go a long way toward understanding my point of view when it comes to accessible PDF).

  Re: function() {Return...
  Good question.
  Write my guess - either to leave the cut & paste that I made at the start of the application I used to assemble and captures screen or something related to the Adobe Forum application.
  It may be that I am "special"; If that were the case we my Lotto occasional quick choice would have been a big winner $ ago.

  FWIW-
  You will find a number of "Accessible PDF" related to resources in discussions at the Forum of the accessibility of the AUC.
  http://www.acrobatusers.com/forums/aucbb/viewforum.php?id=18

  Two PDF Accessible related on demand seminars are also available.
  Search for Duff Johnson and Charlie Pike (at page 2) seminars.
  http://www.acrobatusers.com/learning_center/eseminars_on_demand

  Be well...

• Is it possible to access the task flow parameter in the EOImpl.create () method?

  Hello
  
  Is it possible to access the task flow parameter in the EOImpl.create () method? In the affirmative, please let me know how to access.
  FYI... I have a CreateInsert < xxx > activity in the workflow, which, I believe, called the EOImpl.create () method internally. During the creation of the entity, I want to assign a default value based on the parameter of workflow.
  
  Thank you

  A way to pass parameters from workflow for the model is during the initialization of the workflow. To do this, you can create a prepare() method in the Module of your Application and call it from the workflow. By defining this method by default in your workflow, it will be called every time that the workflow starts. You can pass any task rate desired as the arguments of a function prepare() method. In the prepare() method, save the workflow of the values for parameters in the transient variables EO or VO. These variables will then be accessible in the create() methods.

• How to access ColdFusion from FLEX session variables

  Hi all
  Is it possible to access Session variables in ColdFusion from Flex?
  I access ColdFusion CFCS in Flex using the Webservice queries. Running Flex SDK 3.2/Flex Builder3 / ColdFusion8
  
  Any help is appreciated!

  Pass variables (parameters) in your application Flex is to change the Flex Builder generated .html file that calls your application .swf in a .cfm file (just change the file extension). Then edit the file and search for the AC_FL_RunContent add a property for the Flash Variables like this: "flashVars", "MyName =#CGI. USER name #«,»
  In the Flex application, you can call myName = Application.application.parameters.myName;
  This can pass ColdFusion variables into Flex.
  Scott

• I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

• Is it possible to transfer videos from the iPod from someone else on my iPhone?  How to achieve this?

  Is it possible to transfer videos from the iPod from someone else on my iPhone?  How to achieve this?

  Depends on the model of iPod exactly.

  If the iPod is supported you can try using AirDrop: How to use with your iPhone, iPad or iPod touch - Apple Support AirDrop

  If this is not the case, there are applications in the App Store that will allow you to send files, including videos taken with the iPod and who reside in the film to other devices.

  https://iTunes.Apple.com/us/app/photo-transfer-app-easily/id365152940?Mt=8

  Photo transfer app allows you to quickly copy pictures and videos from your iPhone, iPad, Mac or PC using your local wifi network.

  You can't send videos that are stored by default Apple video App.