Is it as easy to make statements of income using the iPAd as a laptop?

Similar Questions

• Make a new file using the "Save as".

  Bit of feedback to the staff HERE...

  We use LabVIEW 8.6. and, at least in this implementation, trying to make a new VI using the command save as product a menu of choices, including none make sense to me. Sorry, but I can't say which of them will produce only makes a new file with a changed name to be refined. Trial and error product folders, but not files, replaces the original file (why would I do that, I chose save as no record) and about each result other than what I was trying to accomplish.

  May you fix this in a future release, but for 8.6, I feel that I must take a class just to save the new file.

  you're not alone...

  Have you tried "open extra copy?  This is probably what you want.  It will not copy the original and will keep the open source.

• T-Shirt Designing (1): how to make wider white box (using the model of t-shirt)?

  CS6 using

  T-Shirt Designing (1): how to make the white box more wide inside the shirt (using the model of t-shirt)?

  Well, I learned that I can go to file > new from the template > blank template > T-shirt to start to create a design for my t-shirt.

  It shows a small picture of the t-shirt with a rectangle in the middle that also represents the large rectangle (where I create my design).

  Question, am I suppose to create the right design in the large rectangle?

  2nd... I figured out how to adjust the length and width of the largest rectangle (through the corners, then clicking on it to open the section length/width at the top of the screen). However, when I adjust the height and width, is not the same for the rectangle inside the shirt.

  What I'm trying to do, is ensure that my design takes more than forward of the sweater by expanding the width.

  How to make the small rectangle in the large t-shirt too?

  Hello

  The small rectangle in the t-shirt line drawing is a guide. So, what you need to do is unlock guides, remove the small rectangle and create a new.

  (1) go to the view > Guides > release Guides. You will now be able to edit the guides, which are light blue in my document.

  

  (2) just so that you know what I'm talking specifically, open the Layers panel and place you on the Guides layer. Click the arrow next to reveal the guides within the layer. I locked all the other layers in the document to make it easy for me.

  

  (3) select the small rectangle, and delete.

  

  (4) use the Rectangle tool to draw a new in size.

  

  5) option click on the new rectangle to open a launcher. Select make Guides.

  

  You now have a guide again, larger rectangle! Let me know if you have any other questions.

  

• How to make a bootable USB using the disc with El Capitan utilities?

  Anyone know how to make a bootable USB key using the disc with El Capitan utilities?

  Try this its worked perfectly.

  http://www.Macworld.com/article/2981585/operating-systems/how-to-make-a-bootable - os-x-10-11-el-capitan-installer-drive.h...

• Make a file upload using the feed reader

  I do an upload of file with a text file using the format below.
  

  Name^RollNo^Org^City^State

  This list of keywords will be recovered in the controller using InputStream. City in the name list that is downloaded is only the non-mandatory field.
  For it is below the same size of list data back 3. This is why the data entered into the 'State' are set to the value 'city '. In fact, the size of the list should be 4.
  
  Sample data (does not work)

  Sam^100^Org1^^Texas

  If I change the format above to include a blank space for the "City" field The size of the list is extracted as 4 and works very well.
  
  Work data

  Sam^100^Org1^ ^Texas

  Thanks in advance for the help

  Barros says:
  I'm sharing the records using StringTokenizer. Here is the code

  StringTokenizer token = new StringTokenizer(list, "^");
  

  I would like to use

  String[] splitList = list.split("\\^");
  

  who do not throw empty fields.

• [as2] Make a Tween without using the tween class, take 2

  Hello. The previous topic was allowed to use with settings that made a square only.

  If you try to make a clip trip along a diagonal rectangle within 90 seconds, the video made a few curves.

  Any help?

  Thank you

  the code I gave before induces no curve.  but because flash rounds the positions of the object to the pixel the most proche.05 you can see an accumulation of rounding errors if you use some settings and you are very picky about the position of the object.  If this is the case, use the following in order to avoid the accumulation of rounding errors:

  function initTweenF(mc:MovieClip,_x1:Number,_y1:Number,_x2:Number,_y2:Number,_sec:Number):Void {}
  var freq:Number = 70;
  clearInterval (mc.tweenI);
  MC.x = x 1;
  MC.y = y1
  Mc.x = MC._x;
  Mc.y = MC._y;
     
  mc.tweenI = setInterval (tweenF, freq, mc, (x 2 - x 1) * freq /(1000*sec), (y2 - y1) * freq /(1000*sec), x 2, y2);
  }
  function tweenF(mc:MovieClip,_xInc:Number,_yInc:Number,_x2:Number,_y2:Number):Void {}
  MC.x += xInc;
  MC.y += yInc.
  Mc.x = MC._x;
  Mc.y = MC._y;
  If (Math.abs (mc._x - x 2)
  MC._x = x 2;
  MC._y = y2;
  clearInterval (mc.tweenI);
  }
  }

• can't make a video call using the version of messenger 2011

  I downloaded windows live messenger 2011, but I cannot now make a video call. My webcam is very good. I click on contact, actions, video but only start it a video call is not highlighted. The other orders are ok"

  Please post the question to the Windows Live Solution Center, Messenger discussions section:
  http://windowslivehelp.com/forums.aspx?ProductID=2 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I used to have 10 items and if I wanted to make a panorama I used the new panorama file options. Now, I have 14 items and the option has disappeared. No help available?

  How can I make a panorama with Photoshop elements 14. The help text is not applicable, because I do not have these options if I have a new file.

  MZ1900 wrote:

  Yohann it would be very nice to receive a response. You have the answer? I now spend a lot of Euros on a package, I can't use.

  Well, you didn't post in the forum of items relevant for you were transferred to the present where you can get help from other users.

  It is important because most of the time this forum has the same questions... and the answer.

  In your case, it's simple: Adobe has moved the Photomerge command from the 'Experts' editing mode to the ' guided changes' mode without enough put into custody. Change is mentioned, if you read the section "What's new" for help and advertising, but it's too much to expect users to read this. So, we get several similar messages every day since the launch of version 14. It also proves that users do not take the time to browse this forum. It is true that the function "search" is far from ideal.

  Before ask you, here are the answers to the related questions:

  Panoramas - Error Message: the Documents must be registered before they can be merged

  Various problems of PSE14 with Photomerge Panorama.

• [as2] Make a Tween without using the tween class

  Hello.

  Is it possible to make a clip start at a given x and there point and ends at another x's point, in 90 seconds?

  I ve done a lot of code, but I m not getting a good result.

  The main problem is, I want the music to travel along the straight line. And by this code under the film clips "b" makes a few curves.

  Here´s what I ve done.

  'p' is point movie clip

  'b' is ball movie clip

  full time = 90000;
  _currentTime = full time;
  oldTime = undefined;
  onEnterFrame = function () {}
  If {(County)
  _currentTime = _currentTime-(Math.abs (oldTime - getTimer ()));
  }
  County = true;
  oldTime = getTimer();
  speedX = (p._x-b._x)/((_currentTime*24)/1000);
  Fast = (p._y-b._y)/((_currentTime*24)/1000);
  b._x += speedX.
  b._y += fast;
  If (b._y > = p._y) {}
  do something

  }
  };

  Thank you

  works for me: www.kglad.com/Files/forums/Untitled-1.fla

• Insert the statement do not using the MultiSelect values correctly

  I have a set of boxes MultiSelect displayed with in a cfloop. I named the MultiSelect boxes "MultiSelect #ID # with #ID #
  
  the value of KP for each record retrieved. I do this to make sure that each MultiSelect box has a unique name so that when I
  
  Insert data by using a query of < cfloop > names of are not in conflict. Here's the HTML for the selectbox.
  
  < select name = "" MultiSelect #ID # ' several size = "3" > (query #ID 'getNonRoleItemDetails) "
  < cfloop query = "getMultiitems" >
  < option value = "#AddInfoID #" > #Name # < / option > (these two values are taken from the "getMultiItems" query
  < / cfloop >
  
  Here's the query insert I use on the action page that uses this data.
  
  
  
  < cfloopquery getNonRoleItemDetails >
  
  < cfquery = name "Datasource =' #application.dbname # of the Insert_Multi_Records" >
  
  INSERT INTO tblItemDetailUpdates (ItemID, ItemDetailsListID, ItemDetailValue, ActionItemID)
  
  VALUES (#getNonRoleItemDetails.ItemID #, #getNonRoleItemDetails.ID #, ' #form ["MultiSelect" & ID] #', #ArrayOfIds [Counter] #)
  
  < / cfquery >
  < / cfloop >
  
  
  
  The problem I have here is that the query works correctly, but it is the insertion of the ID MultiSelect values selected (104, 105,
  
  (106), rather than the real names of these values (IOC, AP, AR... etc).
  
  
  I looked at the source code and each MultiSelect box is named correctly and uniquely. Insert inserts the correct ID
  
  values, but not the names.

  Sigh too bad I am a fool. Well at least I thought about it.

• I tried to install something on the account of other users but my admin password does not work, I logged my account admin to make sure that im using the correct password and it works? any suggestions

  Works of password to log into the admin account

  password does not work to install the software on other accounts

  This will happen when different keyboards are installed. Try to use a password like 123456 is insensitive to the different schemes. CapsLock or NumLock is also a frequent culprit in such cases.

• How can I make a dropdown bound using the OPS?

  Please note that this concerns the FPÖ. I am aware of the support in the ADF.
  
  I'm sorry this is a basic question, but I tried for days, and I see nowhere else to find an answer.
  
  I need a simple drop-down list, not a search. This particular list has only 10 or if items. It is based on a view that contains a code value, and a description. I need all of the descriptions to be available at all times. Just click on the arrow, and the entire list is displayed. When the user selects an entry, the code associated with the discription fills a related attribute. Ideally, when the page is instantiated, the code value control the visible text in the drop-down list value collapsed. Visually, it would be similar to an html < select > element.
  
  Can someone please tell me how I can produce such a simple thing, or point me to the documentation?
  
  Thank you.

  Hi Pete,.

  Below the blog can help you meet your requirement.
  https://blogs.Oracle.com/prajkumar/entry/implement_poplist_in_oa_framework

  Let us know if you face any problems.

  Kind regards
  Stephanie.

• How to make a virtual machine using the full screen?

  I have a 19 '' screen.  In the web page of vm manager when I click on 'console' to get a separate window and maximize that I get a full screen, but the virtual machine does not fill my monitor as the native operating system.

  I am losing valuable real estate.

  Is there a way to fill the screen as the native operating system?  I tried to play with just about anything.  The virtual machine is in a small box, is full from top to bottom but a few inches on each side is black.

  If anyone knows it would be very useful.

  Guest operating system do you use? As said more top vmware tools must be installed for the proper functioning of MKS. Done also by pressing CTRLALTENTER your virtual machine puts your virtual machine mode full screen to use all your "real estate"?

• Necessary insight as to how the Stats are cascaded to the index after updates.

  SCENARIO OF
  
  • We have a process of intensive loading (100 s of the tables involved, several hours of execution). We collect stats diagram only on obsolete objects when executing to minimize the load on the system while the statistics come together at intervals (see the command below).
  
  • There is a table with an index on column X
  • When the table is inserted in during a charge process column X is null and that the index is empty.
  • When the table becomes stale (and the column X is null of remains), his stats get generated using the package gather_schema_stats with the STALE 'COLLECT' and ' CASCADE = TRUE options.
  
  • Subsequently, all records from the table are loaded and the collection of statistics has occurred, column X happens to updated with the values so then inserted in the index. More no record is inserted into the table.
  
  
  QUESTION
  
  After the charge fit more no record and the table never gets denial as defective if new stats are not generated (no surprise). However, what is the impact on the index which now has lines in there (as a result of updates that occurred after the loading table has been loaded)? When the stats were executed on the table (with case sensitive = true) index was empty. Do I need a work of gather_stats separated on the index or somehow, it will inherit the values associated with the full table optimizer statistics? _
  
  Here is the command I use:
  exec dbms_stats.gather_schema_stats (ownname = > 'UICONNECT',-)
  Options = > "FADE TOGETHER",
  estimate_percent = > dbms_stats.auto_sample_size, -.
  method_opt = > 'for all columns size auto ' -.
  degree = > dbms_stats.auto_degree;
  Cascade = > TRUE);
  
  This problem is forcing me to understand the optimizer (viz has know statistics) more than I hoped would be necessary. But alas... developers ask me if I need to manage (correctly)!
  
  Thanks in advance for any idea on this issue (or references to good material... it's hard to google it).
  
  Published by: TonyG on July 14, 2010 14:10
  
  Published by: TonyG on July 14, 2010 14:11

  Just to clarify one thing:
  "Cascade" not "copy" table to the indices statistics.
  Cascade just make sure that you don't have to hard-code calls individual gather_index_stats. So this means that its index stats are also gathered, based on what is in the index.
  This means that the generated statistics will be inaccurate, once the column is filled, as probably the key indicator, the clustering_factor, of the index will change.
  So yes, his stats should be re-assembled, or you can decide (when the grouping after load factor is relatively constant) to block these statistics and to exclude the gathering.

  HTH
  -------------
  Sybrand Bakker
  Senior Oracle DBA

• Is there an easy way to reconnect the iPad Pro to my iPhone 6s longer hot spot?

  Whenever the iPad Pro 'locks', connecting to my iPhone 6s hottest spot goes down, I can understand.  No need to have the connection when not to use the iPad Pro.  The problem is that you have to go all the way back in the reconnection of the hotspot settings.  Is there an easier way?  I wish it would just automatically reconnect.

  Thank you

  My 2 Air iPad automatically connects when I unlock it to the lock screen. You ask to join networks disabled in the WiFi settings?