Is it possible that the participants Maximum should be change after registration?

Similar Questions

• Is it possible that the size of data allowed to be > 11FR in the final product?

  Is it possible that the size of the authorized user data be > 11FR in the final product?
  
  There are so many other restrictions in 11gXE, really makes very different version XE SE (1). So, why not just allowing more user data? It must be an internal parameter that can be changed for the final release.
  
  R / Zaf

  In my opinion, one of the aspects is the competition. Mainly MS Express varying with roughly the same limits of equipment. DB2 Express-C has more loose limits but however defined a comparable feature. Also add into the mix that Oracle have MySQL and BerkeleyDB.

  You just need to make a compelling business case analysis as why Oracle should be the limit before time/competition. ;)

• Is it possible that the remote PC can "ask" his updates must be installed from a WSUS server?

  Original title : After you download updates on a Windows XP PC to WSUS server, is it possible that the remote PC can "ask" his updates to install? Rather than set a deadline in the WSUS server.

  After you download updates on a Windows XP PC to WSUS server, is it possible that the remote PC can "ask" his updates to install? Rather than set a deadline in the WSUS server.

  On our WSUS server, I download updates for the PC group, but didn't set a deadline.

  We want to do is launch a script/application to install updates.

  Hello

  I suggest you ask your question in the Microsoft TechNet forums.

  WSUS TechNet Server

  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

• Is it possible that the shape parameter to stay after the closure of the lay out?

  Is it possible that the shape parameter to stay after closing the lay out at run time?
  
  example scenario:
  
  I have a report I'd use consecutively for 10 times to check different things,
  
  instead of the closing and opening of the report for 10 times, I would like if possible to the form of parameter to stay after the layout look a-close
  
  Thank you.

  Hello
  If you are talking about the report parameter form. So I don't think it will stay open after the closing of page layout. Better to use the form to pass parameters to the report.

  -Clément

• I was wondering in the era of 3d everything that the operating system has not changed to 3d?

  I was wondering in the era of 3d everything that the operating system has not changed to 3d. like where the BONE is part of work like as if you where he is plunged into a game but the game was the operating system. As windows responding simcity.  so when you interact with something he grows or changes the subject. I'm tired of seeing a 2d world when I know that a 3d world is here. I want to say is that imagine an OS that was alive. like all those science fiction movies. I'm new to programming, but it's just one of my many ideas that I think could change the computer OS never imagine sitting on your couch with 3d glasses and feel like you where in a virtual world.

  One simple reason: convenience.

  The current problem with our 3D technology is that it would be broken by you are going to use the touch interface. Because, after all, it's just an illusion. Now let's talk about resources: do you really want your OS using towards the top of your ram, CPU and GPU to the point where you could not yet to start a game?

  Now think about 5 years computers upgraded... they would be even able to run this OS?

  What happens if there is more than one user per computer? What about people who get migraines of 3D? (shutter put on my glasses and my ability to perform simple tasks similarly is gone in 5 min with migraine resulting)

  Maybe this will be handy one day, we just aren't there yet. Do not give up the hope, however: at the moment where you get one such product coded, the tech world will already be a different place.

• set of full data after that the incorrect line should pass to the errors table

  Hi all
  
  In fact, I have a table which has key equipment, date and so far the data comes as e1, 10:30 11:30.I want if the readings are not continue then this data point all records that the equipment should go to the error table. Is it possible to have a logic as it means assume that I have a data like e1, 11:30, 12:30; E1, 12:30, 01:00; E1, 01:30, 03:30, e1, 03:30, 05:30 since reads are not continuous from 01:00 the logic must be such that the two lines: e1, 01:30, 03:30, e1, 03:30, 05:30 is expected to rise to the error table.
  
  Thanks in advance for the help.

  Sorry ;)
  Snapshost is [url http://tsib.freehostia.com/analytfun_f1.html] here

• Is it possible that the CLOSE button Firefox on MAC OS to run as native applications... for example Safari?

  Is it possible that it works like Safari and other applications? Instead of him going out and losing all saved information outputs/short in the background like Safari and restores correctly?

  If this isn't the case, is there a reason that it is this way, unlike other MAC applications?

  Thank you.

  Note that Firefox on Mac is supposed to turn to a native style in Firefox 24 (10.7 and more I think).

  24 of Firefox being released today: http://www.mozilla.org/en-US/firefox/24.0beta/releasenotes/

• is it possible that the backup made on ios 9.3 icloud beta can be restored on ios 9.2.1?

  I upgraded my iphone 5 ios 9.3 beta and made a backup on ios 9.3. But now I want to downgrade to 9.2.1. What is your backup on ios 9.3 work on ios 9.2.1?

  No, it isn't. See this information from the participation of the beta software. All iOS beta - Apple Support software

  See the section on an archive backup.

• Airport most convenient that the range extender today broke up after that put 7.6.7 at level

  I have two extreme airport connected with an ethernet cable, one for upstairs and one for down. One downstairs is set to extend the reach of the network wireless created by one on the floor. Also the one upstairs is configured in Bridge mode because I have a server that I use for DHCP and DNS, instead of using the airport for that. The server and the airport on the floor are connected to the same network switch.

  Everything worked very well under firmware 7.6.4. But after the upgrade to 7.6.7 and without changing any settings, now my network is terribly broken. No devices can connect to the wifi network, and the network interface on the server shows errors like "has received the package on eth1 with own address as source address" and "Null supervisors, receiver of broadcasting not ready."

  The problems went away by unplugging the airport down.  But this isn't a good solution.  I want to have both, and I want that they function as they did before.

  When you have airports connected by ethernet... YOU MAY NOT USE EXTEND WIRELESS.

  The result is the following.

  Server shows errors like "has received the package on eth1 with own address as source address" and "Null supervisors, receiver of broadcasting not ready."

  You create a loop where packets are going around and around the system.

  If you say you had it past 7.6.4 firmware and it was broken by 7.6.7 well, I can only say that he has never worked on any firmware with a switch or other device which is able to break loops.

  Return to 7.6.4 and see if it still works.

  I found that Wireless extend over 7.6.7 is more restrictive than the firmware as soon... I highly recommend 7.6.1 for it... as I can show 7.6.4 reproducible problems but it is also a case that former airports are losing just their WILL... I had success extend wireless who recently failed... and it's purely too big range... considering that it used to work properly. Which shows that the products are just slow decline.

  I also get numbers of the absurdity of airport utility that I still don't understand.

  for example. I got the link to work on a new Gen5 TC (refuses to bind on Gen4 TC)

  

  If I click on the unknown link, it shows a link 450Mbps speed which is impossible. The RSSI is also what you would get with the two devices within 1 foot of the other (30 cm) No 20 M through several walls and a floor.

  The end of TCgen5 by using the utility v5.6, I see the actual rate...

  

  The link is showing 54 Mbit/s and a signal-78dB which makes much more sense. Unfortunately the other end does not record again... and the value 0 for the noise is also wrong.

  Noise on the latest diagnostics wireless displays 0 for a lot of wireless.

  

  Something rotten in the world of the Apple to the end... What with the CCMM giving a total mess to Airport utility if people use it...

• Why to start Firefox message appears that "the color palette has been changed to Windows 7 Basic"?

  I am running Windows 7. When Firefox starts the message that arrives the color scheme has been changed to Windows 7 Basic. The message then continues to talk about the incompatible program. When I close Firefox to the colors return to normal. It has just begun to happen.

  Check that you are not running Firefox in compatibility, or with a reduced screen resolution mode.

  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

• Qosmio X 500-10T: what setting should I change after upgrade SSD?

  Hello community,

  I'll upgrade my Qosmio X 500-10T (currently with two 512 GB drive HARD, although only has data on it) with a Samsung 840 series 256 GB 2.5 in SATA SSD Pro and then perform a new installation of Windows 8.

  My question: what settings should I change once the switching plate?

  I think there may be some settings in the BIOS that may need to be changed.

  Also, it is recommended to remove the second HDD due to possible performance issues along the SSD?

  Are the drivers on the windows-compatible laptop computer support page 8?

  P.S. I read on UEFI, is there a way to update/upgrade existing in UEFI BIOS?

  I know it's a lot of questions, but any help is appreciated.

  Thank you

  Hello

  > My question: what settings should I change once the switching plate?
  > I think there may be some settings in the BIOS that may need to be changed.

  Usually, you do not need to change anything in the BIOS.

  > Also, it is recommended to remove the second HDD due to possible performance issues along the SSD?

  You may notice poor performance while moving or copying data from the SSD hard drive or SSD HARD drive.
  but to think that you can keep the HARD drive in the 2nd Bay for other files.

  > Are the drivers on the windows-compatible laptop computer support page 8?
  Do you think that some drivers Win 8 there?
  If so, they are...
  otherwise, you can try some Win 7 drivers in the frame to win 8

  > . I read on UEFI, is there a way to update/upgrade existing in UEFI BIOS?
  If you're going to see an update of the BIOS for the Qosmio X 500 with a serial number 6. XX or later version, then it would be a version of BIOS released to win 8 too

• Is it possible that the computer to request a new username and password when I log in it?

  Original title: new account

  Hello world!

  Is this possible in windows 7 that when I restart my computer it will ask for the new user name and password on a welcome screen, then save it.so when I connect my computer next time, he will simply ask the user name and password will be the same that I created on the Welcome screen.
  Thank you.

  In a collegial environment you normally join computers to a domain. If Yes, then the process is simple:

  1. You do the initial installation.
  2. You join the computer to the domain.
  3. You turn back to the teacher.
  4. It connects with its domain account.

  If you do not use a domain then you need to create a local account & password for every teacher before giving him the machine.

• Is it possible for the participants to see only the host and the host to see all participants (webcam)?

  I want to be able to see the webcams of all participants in the room, if they have active, but all participants must only be able to see the host from the host. Is this possible?

  No, the view is the same for everyone in the room, regardless of the role within the room.

• Is it possible that the installation of APEX is on the Oracle 10 g standard database?

  Hello. Nice to meet you.
  I try to install 3.1 APEX on the standard version of the 10g database.
  APEX 3.1 on Oracle DAtabase 10g standard, not of Enterprice version. Is this possible?
  I really want to know about it.
  Thank you very much!

  Hello

  Yes. No problem. You can even install it on XE (actually it is preinstalled on XE). Just follow the same steps that you did for the EE version.

  Greetings,
  Roel

  http://roelhartman.blogspot.com/
  http://www.bloggingaboutoracle.org/
  http://www.Logica.com/

  You can assign this answer to your question in marking it as useful or Correct ;-)

• My wireless hub will not allow access to my statoin game 3, saying that it is possible that the settings for the media server are not listed by that name. !

  When the lap top is online, you can see his tent to connect, but after pressing X on the signifier, he said.  !

  Hi, please be a little more specific with your question. Where exactly is this 'X' and '! ' you see? Also, what version of Windows are you using?

  Not sure if it's exactly what you're looking for, but here's a thread that details the steps you need to take to put in place sharing media between Windows and a PS3.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/PS3-media-share-with-Windows-7/b4a54866-264b-45D2-b3c2-2f0d93928cd7

  Hope this helps