My wireless hub will not allow access to my statoin game 3, saying that it is possible that the settings for the media server are not listed by that name. !

Similar Questions

• Apple wireless keyboard will not connect to mac mini

  Apple aluminum wireless keyboard will not connect to mac mini. He worked the other day and when you press the power button gives me a green light for a few seconds. I removed from my bluetooth devices and removed the batteries which did nothing. It will not go into the mode of discovery, but he recognizes the keyboard and fails to connect.

  So much for some reason any it plugged into my macbook of brothers.

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• New wireless printer will not see my router wireless/network

  I have checked the other posts, but their issues are a little different from mine.  I just bought a new wireless printer.  I got Samsung remote in, and no matter what they or I did, nothing worked.  We have installed drivers & everything, and my wireless network will not be displayed in the list of available networks.  I have my router sitting 2 feet of the printer & my laptop.  I know it works because I use my wireless laptop at the same time.  We tried to enter the settings manually & automatically & my network will not be displayed.  I use Windows 7 with the Avira software with an active firewall on my home network.   I have tried for a week now and I'm ready to return the printer.  Help, please.  Here are the parameters that you can request.  The only thing I can think is that I asked to be assigned and IP address because I do not know how to get the real.  Thanks in advance

  Manual settings entered: (from my home network properties in Control Panel)

  (the exact name of my network)

  Security type: no authentication (open)

  encryption type: WEP (even if the drop-down list in the printer software makes me choose wep64 or 32

  Security: wep

  security key: (I get)

  key index: 1

  To get it back to where I needed either from me has it taken about 2 months - reinstall all the programs, implemented my toolbars desktop, special etc. It's a chore because I do transcription work and have several versions of Office & I need to do something special for the transplants I don't get this error message because I have more than one version, etc.

  If you can afford it (not very expensive), buy an external USB drive enclosure and a hard drive at least as large as your installed hard drive.  Once you get your system as you wish, create a complete image of the disk and save it to the external hard drive.  Sometimes, if you buy a player and a box together, software disk imaging and cloning is included.  Otherwise, there is some disc perfectly adequate cloning/imaging programs available.

  If you get a large enough external drive, you can use it to make an image of such system which just after getting properly put things in place and make then one or more periodic images to use as backups.

  If you clone rather than image, then you can just swap the current drive for the clone.  It is more useful as a backup in case your installation disc breaks down.  As a general rule, images can be restored from the backup disk or from the software installed on your computer or by using a CD bootable you create using the same backup software.

  I highly recommend you get one of the following options (or any other similar software you can find) and make backups.

  If you have a Western Digital hard drive, you can get a version of Acronis True Image free of WD (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get the software of cloning separately (this is not an exhaustive list and in no particular order, some are free, some not):

  Acronis True Image Home
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  XXClone

  Macrium Reflect free

• Microsoft wireless keyboard will not type the letter 'c' or type the number "3".

  My wireless keyboard will not let me type the let type me the letter 'c' or type the number "3". This works sometimes! Help please!

  This is a Microsoft wireless keyboard 3000 v2.0. It came with a mouse aswell which is working as expected.

  Any ideas? It's so frustrating!

  If you can, try the keyboard on another PC and try a different keyboard on your PC. If the keyboard has the same thing on another PC and another keyboard works well on your PC, it is "side on" hardware failure. Assuming that it is hardware failure, if it is under warranty GET it replaced, it is not you will have to buy a new one.

  Please mark this as useful or response if applicable.

  Tricky

• My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  Hi 464544,

  Welcome to the Forums of HP Support! I understand once that your HP Photosmart 6520 starts in mode "sleep" you cannot send a print job, it does not automatically standby upward.

  Please take a look here:

  The printer into standby mode after five minutes of inactivity to help reduce energy consumption. The sleep time can be changed from the control panel. The printer will wake up mode 'sleep' to print when a print job is sent to it.

  However, the auto power off feature must be disabled. Auto Power-Off turns off the printer completely, you must use the power button to turn the printer back on. You can change the setting Auto Power-Off from the control panel. configuration -Source

  Menu Configuration > other Menus > Eco > auto shut-off > off

  I hope this helps.

• My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this.

  My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this. All the settings are there. I have an IPhone 6.

  Are? you double click in front of the screen of the iPhone are? (pending). This is what seems to work for me.

  I hope this can help.

• HP dv6815nr: Wireless Card will not connect to internet

  Hey people, trying to make my old laptop back to semi in working order.  Did a fresh install of Vista, but the wireless card for some reason any will not access the internet, says "local use." Internet works as the other computers in the House are connected on the wireless and when I connect the ethernet, features of connectivity cord.  Crossed and uninstalled/reinstalled the driver.  I have no special security here, just the windows firewall, which I disabled the thought that he could block, but it was not the question.  Other ideas you can come up with that would be great.  I have also included the hardware ID for my wireless card.  Pilots have been taken off this site from hp for my computer model as well.

  PCI\VEN_168C & DEV_001C & SUBSYS_137A103C & REV_01

  Hello:

  You need to install a driver update... the problem is probably your router is too new for the old driver wireless deal.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

  Go back and activate your firewall if you have not already done so.

• PC with wireless card will not connect to the login of the user (Windows 7 RC)

  My PC uses a Rosewill (RNX-G300EX) wireless card with the software and drivers of Railink.

  With Windows XP (Pro) PC would connect to my home network and the internet on startup without user logon.  It is important to me because the data that I want to use on the network on this PC, and I don't necessarily want to have a user logged on to do.  I also have immediate internet access to connect remotely with TeamViewer, which worked perfectly with Windows XP.

  Since my switch to Windows 7 RC, I don't get the immediate connection through the wireless card.  It does not connect to the local network or the internet until a user logs on.

  Articles I checked:
  Driver - Microsoft actually already provided an updated driver that were obtained through Windows Update.  The driver for the wireless card should not be a problem.
  Power settings - I checked in advance for the power settings in Windows 7 and made sure that the wireless card has been set 'Maximum Performance '.
  Properties of the device - I have checked the device properties for the wireless card and made sure they were NOT defined to allow the OS to turn it off to save energy.

  I missed some type of parameter which is a novelty for Win7?  My computer with a wired network connection works fine with Win7 and is accessible at startup without user logon.

  First of all, thank you for the Mark test.  But the problem was not to have the connection when a browser is opened.  To open a browser, a user needed to be connected... with a logged-in user, the wireless adapter worked fine.

  Now, to answer my own question for someone else who might read this.

  I sent this message to Rosewill.  They advise that Ralink (spelled correctly this time) had not yet developed a good driver for Windows 7.  Windows Update apparently used a Vista driver and Windows 7 is apparently a bit different... or just Ralink is not cut with Vista either.

  So, I tried a Netgear USB wireless adapter.  BINGO!  The computer automatically start this device.  There is now a network connection to start.  TeamViewer now shows the computer as being online without that person may be connected.

  ANSWER: hardware
  RALink is a failure by juggling the time.  If you are looking to buy an adapter wireless network with a Ralink chipset, don't.  The link that Rosewill support sent me for the Ralink drivers was broken.  The Ralink site shows it as having certificate problems and IE8 does not recommend open it.  They are apparently dropping the ball.

  I'll buy a new wireless network adapter.

• Wireless printer will not print

  I downloaded a printer wireless with the disk successfully.  It is listed under programs, but it is not listed under fax machines and printers available, so do not print.  After installation it says that everything was finished and complete.  Any suggestions?

  Hi TerrifWright,

  Please answer a few questions to refine the question.

  1. What is the brand and model of the printer?

  2. what happens when you try to print? Do you get any error messages?

  3 is this problem limited to any specific application such as Internet Explorer, Microsoft Word etc.?

  This problem normally occurs when the printer is not compatible with the operating system. We will analyze and identify the cause of the problem.

  Method 1:

  Run the troubleshooter, and proceed as described in the article.

  Solve printer problems

  Method 2: Uninstall and reinstall

  You can uninstall the printer completely go Add / Remove Programs & then try to reinstall and see if the problem still occurs.

  a. because you used the CD supplied with your printer, you can download & install the software of the printer from the manufacturer's website.

  b. connect the wireless printer on the computer. Make sure the printer is powered before you continue.

  c. click on Start menu > settings > Control Panel > printers and faxes.

  d. click on "Add a printer" in the navigation bar on the left under"Print jobs." "Add Printer Wizard" will open.

  e. follow the wizard until you reach the page 'local or network printer"and choose"printer local... "or"a network printer. Choose the basis on the question of if the printer is connected directly on this computer or a print server or other computers on the network.

  f. type the wireless network password, if prompted. The Printer Wizard can also ask to install drivers to print before the final connection is made. If you receive this prompt, click 'Yes'.

  g. close the wizard when you get to "Finish."

  See also:

  To add a printer attached to your computer
  To install new or updated printer drivers to update
  Hope this information helps. Response with status so that we can help you.

• WIRELESS ADAPTER WILL NOT WORK UNLESS THE WIRED CONNECTION IS PRESENT

  PROBLEM: RECENTLY SPEND YOUR DESKTOP OF WIN - XP TO WIN 7 32 BIT AND MY HP LAP TOP VISTA 32, WINDOWS 7, 64 BIT.

  WIRELESS LAPTOP ADAPTER, NOT REARRANGE ITSELF TO USE A WIRELESS NETWORK

  CONNECTION. THE ROUTER AND WIRELESS ADAPTER HAVE THE CORRECT INFORMATION CONFIGURATION AND WORK WELL USING THE WIRED NETWORK. WHEN I MOVE THE NIC WIRELESS WI - FI FAILS.

  INFO WIRELESS ROUTER:

  LINKSYS BRAND: WRT300N V1.1
  BASIC WIRELESS SETTINGS: NETWORK RADIO BAND = AUTO, CHANNEL = MIXED MODE = AUTO, SSID = ACTIVE.
  WIRELESS SECURITY = WPA PERSONAL WITH TKIP ENCRYPTION

  WIRELESS ADAPTER, INTEL (R) WIRELESS WIFI LINK 4965AGN

  HP Pavilion DV 9700, WIN 7 64 bit update for Win Vista 32, NVidia Ge Force 8600 m GS graphic card, Win 7 64 bit.

  WHEN I CLICK ON THE ICON TO ACCESS INTERNET AND CLICK ON THE NETWORK TO CONNECT, THE WINDOWS NETWORK DIAGNOSTIC DIALOGUE BOX SHOWS CONNECTED, BUT FAILS TO COMPLETELY MAKE THE CONNECTION. WATCH THEN RESOLVE THE PROBLEMS, WHICH FAILS AND FINALLY TO INVESTIGATE THE PROBLEMS OF ROUTER OR ACCESS POINT...

  OTHER PEOPLE HAVE THIS PROBLEM, WHEN THEY SWITCH TO WIN 7. BUT THERE WAS NO MIRACLE DOCUMENTED THAT I CAN FIND ON THE WEB. IN THE OTHER FORUMS DISCUSS ISSUES RELATED TO THIS PROBLEM CONGREGATE, THEY PROVIDE NO BUGS. I NEED HELP TO SET UP MY WIRELESS NETWORK ADAPTER TO THE RECONFIGURATION OF THE WIRELESS NETWORK.

  Thank you all who responded and have tried to help me. Before posting, I tried most of the mentioned patches, including upgrading my firmware of the router. In addition, I went to Device Manager and scanned for changes and checked the properties under the Advanced tab of the Wifi link adapter. I tried the update driver and deactivation and activation of the device. None of this has worked.

  Finally, I uninstalled and then reinstalled the Wifi card. It worked. I guess the driver software became corrupt and data of the register of the device had probably need re - install, this is what worked. This seems to happen when upgrading Windows operating systems prior to WIN 7 and later people lose their wifi connection. Then this problem develops.

  It worked for me. I hope this works for others with the same problem.

  Once again I thank you all.

• 2nd computer on the wireless network will not get on the internet

  my computer is xp my 2nd computer is vista through the wireless receiver dlink615 and dlink. is on the network but will not go to any willing internet change workgroups the same two as said is on network and said to the internet, but where to go to get on it turns at the local level only

  Hello

  Please make sure that your services are working very well and started, has not stopped.
  1 wireless zero configuration
  2 Server
  3 workstation
  4 Netlogon
  You can find these services, start > run > type services.msc then, a window will open, check for these services if they are running, then there should be no problem with internet.
  If all services are working correctly, then give IP addresses to your PC manually according to the parameters provided by your ISP or registration of your ADSL modem.
  Hope this solve your problem...
  Thank you

• HP Laserjet Pro P1102w printer: HP P1102w wireless printer will not pair with a SBG6782-AC Motorola Wireless Cable Modem Gateway

  I already had Internet AT & T U-verse using a Wireless Modem Arris IPDSL NVG510 gateway.  My laptop HP running Windows 8.1 and the HP LasrJet Pro P1102w wireless Prnter systematically and automatically connected to the wireless network NVG510 with no problems over the past two years and the wireless printer works without problem.

  I recently replaced the Internet AT & T U-verse connection a connection of Mbs Comcast Xfinity Intrnet 25, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway.   My HP under Win 8.1 Pro laptop connects to the network and access to Internet without any problems what-so-ever.  However, the HP LaserJet Pro P1102w wireless printer connects to the wireless network and I can't print at all from my laptop.

  I tried all the suggestions P1102w Wireless Configuration of the printer on the HP printer Support Site, but nothing helped.  I've also updated the firmware of the printer and Loaded the latest driver Installation & full product software.  I tried and re-tried these suggestions over the past two days, but without success.

  I would be very appreciately all help experts in this Forum.  to get the printer working wirelessly, since we also wireless print to this printer of IPads and other wireless laptops.

  Hi @Atmasin,

  I see that you have trouble connecting the printer to the new router. I want to help you.

  I would like to reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  If the network name has spaces or special characters, the printer may not recognize it.

  The printer is able to send/receive in the 2.4 ghz band.

  If it is set to 5 GHZ network, you may need to change to 2.4 ghz. (rename the 5 ghz or turn it off)

  The WPA key setting must be on AES to work properly not TKIP.

  Multi flow must be enabled.
  Router firewall must be open for printer ports.
  If you have Mac filtering give you printer hardware to meet the needs of the Configuration page.

  You may need to contact your router company to get help to check these settings.

  Try to run the Configuration Wizard wireless of the HP software to set up the printer on the network.

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• my HP Envy 120 wireless printer will not print from my ipad.

  My series Envy 120 (E39A3C) is no longer printing from my ipad. The day I install it, it does print, but since that time will not. As far as I know that I have not changed anything.

  It prints perfectly fine from my PC and laptop.

  I took all the advice (I think) on the site to help HP, like switching off and on again, uninstall and then install again. Nothing has made any difference.

  I think I did!
  I missed the instructions at the bottom of the page to set up the Important printer I need to send an email to the email address of my printer. I did it now, and it seems to be able to print from my iPad on request.

  I followed your advice to the letter, but without success. But I am extremely grateful for taking so much time and thought to help me. I felt that you were willing to continue to work with him until the solution has been found.

  Thanks a lot, a lot.
  Hilsocks

• Wireless printer will not install. Rpet print spooler service stopped.

  Original title: Print Spooler Service.

  I am trying to install a wireless printer, and he goes on to say that the print spooler service stopped stop. How can I fix this problem?

  Hi Gaynell,

  If give you the error, try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  Reference: http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/print-spooler-service-not-working/ca5d0119-927a-e011-9b4b-68b599b31bf5