Why to start Firefox message appears that "the color palette has been changed to Windows 7 Basic"?

Similar Questions

• the color scheme has been changed to windows 7 Basic. What does that mean? This prevents me from using a program on my laptop. How can I fix?

  What does that mean? This prevents me from using a program on my laptop. How can I fix?

  Hi Justin_89,
  1. what changes have been made on the computer?

  Method 1
  I suggest you follow the steps in the following article and see if that helps.
  
  Change the colors on your computer
  http://Windows.Microsoft.com/en-us/Windows7/change-colors-on-your-computer

  Additional information:
  Change color management settings
  http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settings

  Method 2
  If the steps above fail, I suggest you to run Aero troubleshooting.

  Open the Aero Troubleshooter
  http://Windows.Microsoft.com/en-GB/Windows7/open-the-Aero-Troubleshooter

  Guided Help: the problems of Aero in Windows 7
  http://support.Microsoft.com/kb/976170

  Method 3
  If the steps above fail, I suggest you to update your display adapter drivers. The following link will help you update the driver.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Why Firefox Sync saying that my recovery key has been changed when I don't have another camera to change?

  I am trying to do my first synchronization, but the progress bar on the tab that opens does not move. I've left all night and still no change. When I click Synchronize now, a message appears indicating that I am using the wrong recovery key. I tried to use the same key and generating a new several times without success.

  I understood the question, FIPS prevented synchronization. Unfortunately, the error logs were not too useful, there are constant references to errors in connection with error.login.reason.recoverykey and no traceback.

  Anyway, once FIPS is off sync started working. This level of encryption is probably overkill for standard web browsing in any case.

• Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.

  I am trying to set up a window to the top-

  -follow the instructions of top to select a backup disk - I did
  -Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.
  -in the past, this disc has been used ONLY as a backup disk
  -When you try to check (after Windows links) a message tells me the drive cannot be checked while it works - I have no problem with understanding that.
  -I wonder so I wish "disassemble this first volume" - "... all handles opened to this volume will become invalid..."
  -Do not understand what was required - and having no idea of the consequences (the disc 'way up', and what happens to the invalidated handles?) I replied "Cancel".
  -l' screen after you ask then if I want to check for errors at the next startup of my computer - I clicked on the button "schedule disk check.
  -When I started my computer nothing happened - what happened to "schedule disk check? How can I check the disc when firstly, it seems to be 'in service', but is only a backup to disk, and I thought that it only came into use when the reverse began to run?
  (I also tried to leave a message on one of the FAQ pages on back ups, but it appears that the number of characters is set to limit so low that you can't describe why the FAQ response is considered to be "not useful"
   
   
  Original title: Back Up system - disk and check

  Since this is a secondary drive chkdsk/r can be run without having to reboot.   Close all the programs that can access training and and when you run chkdsk say yes to "remove this volume first...". ».  This will cause no harm.  Although not strictly necessary, I recommend you to reboot once completed the disk check.   This will solve any problem related to the file handles.
  If chkdsk/r reports bad sectors, you should replace the disk.

• I was wondering in the era of 3d everything that the operating system has not changed to 3d?

  I was wondering in the era of 3d everything that the operating system has not changed to 3d. like where the BONE is part of work like as if you where he is plunged into a game but the game was the operating system. As windows responding simcity.  so when you interact with something he grows or changes the subject. I'm tired of seeing a 2d world when I know that a 3d world is here. I want to say is that imagine an OS that was alive. like all those science fiction movies. I'm new to programming, but it's just one of my many ideas that I think could change the computer OS never imagine sitting on your couch with 3d glasses and feel like you where in a virtual world.

  One simple reason: convenience.

  The current problem with our 3D technology is that it would be broken by you are going to use the touch interface. Because, after all, it's just an illusion. Now let's talk about resources: do you really want your OS using towards the top of your ram, CPU and GPU to the point where you could not yet to start a game?

  Now think about 5 years computers upgraded... they would be even able to run this OS?

  What happens if there is more than one user per computer? What about people who get migraines of 3D? (shutter put on my glasses and my ability to perform simple tasks similarly is gone in 5 min with migraine resulting)

  Maybe this will be handy one day, we just aren't there yet. Do not give up the hope, however: at the moment where you get one such product coded, the tech world will already be a different place.

• When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled

  When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled. message also indicates that there are errors.  How can I me then chkdsk to run

  Hello

  See if these two tutorials to help you with this.

  "How to run the check disk at startup in Vista or Windows 7"

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  "How to difficulty Chkdsk will not run at startup in Vista"

  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  See you soon.

• Item that this shortcut refers has been changed or moved

  Can I install a game on my other laptop and even though it has all the icons it will give an error when I try to play "item that this shortcut refers has been changed or moved" when I know that it is not.  I am at a loss to know why. There was no upgrade or what it's done for her.  I have laptop and games and programs work very good about it.

  Hi gearbrain,

  It's happening to all the applications installed on your computer?

  You can try again to create a shortcut and check if it works.

  This problem occurs because of a Microsoft Windows function that does not structure memory shortened correctly if the shortcut (.lnk file) has a goal less of 14 characters.

  To work around this problem, set the shortcut read-only. To do this, follow these steps:
  1. right click on the shortcut and then click Properties.
  2. click on the general tab.
  3. Click to select the read-only check box, and then click OK.
  Check whether the problem is resolved.

  You can try to create the new user account by following the instructions in the link below and check if it works.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I think that the hard disk has been

  HP Pavilion Elite m9255.uk purchased in 2008 product number KT338AA - ABU SOFTWARE BUILD 82GBv3PrA3 AMD Phenom 9500 Quad nVidia MCP61 Chipset processor standard memory 4 GB DDR2 - SDRAM 4DIMM x Sockets 2 x 500 GB ST 350062 OAS model number scsi ST 3500620AS TSSTcorpCDDVDW TS-H653N videocard, NVIDIA GeForce 8600 GT Realtek High Def Audio Vista Home Premium build number 6001 Hauppauge WinTV 885 video Capture when reading this post please keep in mind that I'm getting on in years and I know very little about computers. I hope that I put enough information on my system to help to my request for help. The problem has been ongoing for some time, but has become more common, that it shows by the pc is crawling along at less than snail PACE, or freezing. In the upper part of the casing, inbetween card reader locations that a red light, then it started to blink, then she stays all the time. I tried to reinstall Vista a few months ago and everything was going well for a while, then it started and got worse, it took 10 hours to reinstall Vista on reformatted lecteurC and he hooked for hours on end scene I have disabled the power, he left all night and the next day I reformatted the C drive even once, he did finally install Vista, this time after about 4 hours, but it's always freezing etc. Have you tried sfc scannow result was without windows integrity violations I've run Seatools and he said that some areas were difficult to read I tried checkdisk, running for 14 hours always on 14% of Platinum 5 my gut feeling is that the C drive has had, no complaints because he did a lot of work. My thought is, as there are 2 hard drives that the second was not very useful, I could remove the current C drive and move the drive D and now in the C drive of slot and reinstall Vista there? My thoughts are that if I can do this and it works, then I could buy another drive to put in the D slot, do not want to waste money if it turns out not to hard dive. Of course, that would be much easier (in theory in my head who knows nothing) would just swap the drive letters. Now, when you're all finished rolling on the floor laughing hysterically (which I probably deserve), can someone offer me some ideas, suggestions, or help please? I would be very grateful, because I'm very close to throwing the pc out the window.

  Sorry for him was this post looks like, I use a little pathetic netbook, I have taken ages typing gently, but look at what happened to it... Sorry

  The cost factor, an appropriate player motivated this answer because of your VIsta operating system.

  You must copy the data files on the D drive to C drive.  Although RAID0 conforms to the standards of the AHCI, it is better to change to AHCI in the BIOS. See here that will allow a single hard drive. (The old D disk be reformatted and installation of the OS). In the end, you will need an adapter (like this one) to convert the old disk USB file copying, files of data back to the newly installed C drive.  Such an adpater can be found on Amazon.

  I would have been back sooner, but I'm distracted.

• Qosmio G20 error message: problem with the cooling system has been detected

  I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

  Error message: Warning: a problem with the cooling system has been detected.

  I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

  When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

  I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

  I would be grateful if someone could give advice if the problem is the fan or something else.

  If the fan is the problem, where I can buy a: i live in the United Kingdom?

  Hello

  I think there might be something wrong with the cooling module and the replacement would be necessary.
  Usually, this should be done by an authorized provider (ASP) in your country.

  Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

  So contact the ASP in your country and ask for later handling.

  By the way; also, you can buy the cooling of the ASP module!

  Good luck

• my daughter received a comp. from a friend that the hard disk has been deleted how to get windows xp back on it

  I downloaded windows xp from mirowsoft up to 6 discs of A which I just it ready for the cd of window xp I don't have.

  Hi cjoyner66,

  Thanks for posting. I'm confused on 6 discs A you're talking about. Windows XP can not hold on 6 floppy disks if that's what you are referring. If the hard disk has been deleted, you will need to use your Windows XP disk and reinstall Windows using this disk and the key associated with this record. If you don't have XP media, you must contact the OEM of your computer or buy an extra copy of the XP.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Let know me that the new application has been installed

  Hello
  I want to activate the pop-up for advising me that this new application has installed in my windows 8.
  so, help me to do it.

  Thank you!

  Hello Aisha,.

  Please try the following steps to activate the notification "New App installed"

  a. press Windows + R to open the Run dialog box, type gpedit.mscand click OK.

  (b) in the left pane, click to expand Computer Configuration, Administrative Templates,Windows components, and then open the file Explorer.
  (c) in the right pane of Windows Explorer, double-click do not display notification 'new application installed'.

  d. now click on active.

  Click on apply and OK. Restart the computer and check the issue.

  Let us know if it helps.

• I want to change my password on e-mail account, but the phone number has been changed and he continues to go to the former.

  When you try to change my password, it goes to a phone number. This phone number has been changed, how do I enter it? Hold reset the password for the e-mail account on my old password.

  This depends on your e-mail provider - the people who gave you your e-mail address - which is probably not Mozilla. Contact with them and find out if they have another way, you can reset your password.

• Error closing firefox message appears at the start of the application and indicates that the copy of firefox is already open. How can I find the copy open and close all the time?

  When I consider my daughter and you try to start Firefox (she was previously using Safari) an error message is displayed stating to "close Firefox: a copy of Firefox is already open." Only one copy of Firefox can be open at a time. "Except that I don't see a free application copy, unless it is somehow launched during the connection, a framework I am not either. Firefox works fine on other user accounts.

  Is there still a current default profile folder?

  • < User > /users//Library/Application Support / Firefox/Profiles/< profile >.

  If not, then delete the file profiles.ini
  
  Which will cause Firefox to create a new default profile.

  • http://KB.mozillazine.org/Recovering_a_missing_profile

• Since this morning my Thunderbird (v24.4.0) does not load any new messages. It gives me an error message saying that the RETR command has failed.

  My T-bird was working fine last night but this morning I get an error message starts "the RETR command has failed..." "whenever I try to retrieve new messages (he tells me there are 23 of them), I get this error message. I use the version above on a Windows XP machine running.

  No one here has the ability to do anything to your email address. Your email provider was just having a bad day and it is corrected now.

• On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

  Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

  I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

  If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

  Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

  I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.