Is it possible to add local groups and users on Windows 7 Home Basic Edition?

Similar Questions

• Windows Vista Home Basic Edition keeps looping and will not start

  Windows Vista Home Basic Edition will not boot to the Welcome screen. It keeps restarting loop. I tried to go into safe mode, but who does not start too. Loops of safe mode and return to the start screen.

  I have a dell laptop and I just restalled operating system. I had Windows Update set to automatically download and install. PC worked great until the next day (after the time programmed for automatic updates). I'm assuming that the started after some windows updates when installed. Unfortunately, I can not enter in Windows or Normal or Safe Mode.

  Bill

  If safe mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Dell Inspiron N4050 window 7 Home Basic Edition, sometimes he just Zoom in the page and task unsolicited

  I bought Dell Inspiron N4050 window 7 Home Basic just 2 months ago and since then had the Touch-pad problem, it takes a step that I must return to the dealer, I bought and they re - install back to the factory setting but the problem persists. This problem occurs most when charging the battery. Sometimes he just Zoom in the page and the unsolicited task etc. and this is very irritating. Pleas, help me... Thank you

  If the donor set it back to default settings and you still have this issue, I would take it back to them and tell them to set.

  I hope this helps.

• Windows search does not work in Windows 7 Home Basic Edition and ultimate PC.

  Original title: find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting

  Both my PC Windows7 Home Basic & ultimate respectively, ARE NOT THE start - search-WHY NOT?

  & What should I do to fix this?
  Stan Miller, Namibia strong.

  Hey Stan Miller,

  1. When did you start to question?

  2. you will remember to do recent changes on the computers before this problem?

  You can try to run the troubleshooter Windows search and check:

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Also check out the following link and check:

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

• Windows Vista Home Basic Edition has been reinstalled and I would like to uninstall it

  I would like to uninstall windows vista. We have now old windows with all our files on it and windows with nothing on it. I would uninstall the last installation and simply go back to the old. It's on a lenovo. It's my friends computer.

  Hi, Cheryl l.,

  Your system must have a Windows CD.  Insert the CD and restart your system.  When the press and the button to start the CD-ROM appears, press on and keys.  Install a new copy of Windows.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Home Basic Edition, Acer laptop wireless, Linksys router and connect Lexmark X 9350 wireless network.

  I'm tired... I tried everything I can think of, as well as everything I can find online in order to connect my printer Lexmark X 9350 WiFi for my Acer laptop which is connected to my home network wireless via my linksys router. At the same time, the printer has been set up through my existing wireless network and was working properly. (FOR A SINGLE DAY!) Then I got the bright idea to installNorton Anti Virus Security. Since then, my printer stopped working through the wireless network. It works as a stand-alone Copier and fax machine, but nothing of the printer.  I contacted Lexmark via online support, but their suggestions did not work or were so confusing that it would take a computer technology to interpret the instructions to correct the problem. I learned more about the Wi - Fi networks and computer by trial and error, I should be able to re - connect my printer the eyes bandaged.  Help, please... This problem is ongoing for weeks. Thank you so much in advance.

  Just a thought, as you say it started with Norton check his firewall exceptions:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  If you use Norton, make that file and printer sharing is enabled in THE Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall)

  See you soon.

  Mick Murphy - Microsoft partner

• Is it possible to add the location and the date on the pictures in a slide show?

  Is it possible to add the place and the date on the pictures in a slide show?

  Only if you manually add a title slide t photo and enter this information manually.  There is no automatic way in Photos.

  Click on the button "+" at the right end of the slide show to add a title slide.

  

• How to add music background and stationary to windows live mail

  How to add music background and stationary to windows live mail... IF SO... HOW?

  There may be something there, but I don't know any personally. If you have professional, enterprise or ultimate edition, you can use OE in XP mode.
   
  How to use Outlook Express in Windows 7
  http://www.oehelp.com/OEnWin7.aspx
   
  You can also hack into Windows Mail, but it is not ideal IMO.
   
  How to restore Windows Mail in Windows 7
  http://www.SevenForums.com/tutorials/5481-Windows-mail.html
  How do I activate the Windows Mail application in Windows 7
  http://www.TechSpot.com/VB/topic137494.html

• How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  Hello

  I want to give as open & export to the level of permissions.

  How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  For example, if the group permissions, inturn should reflect on the users.

  Please help me.

  Thanks in advance,

  A.Kavya.

  Your question is quite broad and fuzzy then I suggest the security catalog presentation to read documentation: http://docs.oracle.com/middleware/1221/biee/BIESC/mgrgrpsusers.htm#CIHIBJGD

  And I think that you mix you two things which are managed in different places:

  ) an object as read access permissions, write, delete... which control you through the object "Permissions" dialog box

  

  

  (b) functional privileges controlled through "Manage privileges" under "Administration".

  

• data tables store information of groups and users?

  Hi all
  
  I want to export all the information of users and groups on the Administration of BI tool. only I can copy them one by one. are there other methods?
  who knows what data tables store information of groups and users?
  
  Thank you
  Dan.

  Hi dan,.

  As you can not access the link which is very informative. Never I've implemented it but john's suggestion, it should work

  Courtesy John: -.

  OBIEE get all RPD users
  I had to get all the users a repository very large because they where to implement a new security model. Wrote a small script to make life easier:

  ' Read_Users.VBS
  "John Minkjan
  "http:// http://www.obiee101.blogspot.com/
  ' Get all the users from a repository
  1: do an export the PRD UDML using nqgenudml.exe
  2: change the location/name of file in this script
  3: run the script in the cscript Read_Users.VBS command line > users.txt
  Set objFSO = CreateObject ("Scripting.FileSystemObject")

  "this point your EXPORTSet UDML
  objFile = objFSO.OpenTextFile ("E:\names.txt", ForReading)

  Const ForReading = 1
  Dim arrFileLines()
  Dim strRLinedim strTemp1dim strTemp2

  I have = 0

  Up to objFile.AtEndOfStream
  strRline = objFile.ReadLine
  If left(strRline,12) = "USER to DECLARE" then
  ReDim Preserve arrFileLines (i)
  arrFileLines (i) = strRline
  i = i + 1
  end if
  Loop

  objFile.Close
  "Then you can iterate over it like that"
  For each strLine in arrFileLines
  strTemp1 = MID (strLine, 15: 50)
  IF instr (strline,"}" ") > 0 THEN
  strTemp2 = MID (strLine, instr(strline,"{") + 1, (instr(strline,"}") - (instr(strline,"{") + 1))) ELSE strTemp2 = «»
  END IF
  WScript.Echo MID (strTemp1, 1, instr(strTemp1, """)-1) &"; '& strtemp2 '.
  Next

  OBIEE get all users and roles of RPD
  In this http://obiee101.blogspot.com/2009/06/obiee-get-all-users-from-rpd.html post I showed you how to get users to the RPD. That take as a point of departure it is a small step to get users and roles they have and put the export in a XLS:

  ' Read_Usergroups.VBS 'John Minkjan' http: / / http://www.obiee101.blogspot.com/
  ' Get all the users from a repository
  1: do an export the PRD UDML using nqgenudml.exe
  2: change the location/name of file in this script
  3: run the script in the cscript Read_Usergroups.VBS command line > users.txt
  4: put the export in a pivot table XLS

  Set objFSO = CreateObject ("Scripting.FileSystemObject")
  "this point your EXPORT UDML
  Set objFile = objFSO.OpenTextFile ("E:\usergroup.txt", ForReading)
  Const ForReading = 1
  Dim arrFileLines()
  Dim strRLine
  Dim strTemp1
  Dim strTemp2
  Dim strTemp3
  Dim intRoles
  intRoles = 0
  I have = 0
  WScript.Echo "username; FULL_NAME; ROLE; COUNT. "
  Up to objFile.AtEndOfStream
  strRline = objFile.ReadLine
  If left(strRline,12) = arrFileLines (i) 'DECLARE the USER', then Redim Preserve
  strTemp1 = MID (strRLine, 15, 50)
  strTemp1 = MID (strTemp1, 1, instr(strTemp1, """)-1)
  IF instr (strRline,"}" ") > 0 THEN
  strTemp2 = MID (strRLine, instr(strRline,"{") + 1, (instr(strRline,"}") - (instr(strRline,"{") + 1)))
  ON THE OTHER
  strTemp2 = «»
  END IF
  arrFileLines (i) = strTemp1 &"; "& strtemp2
  intRoles = 1
  i = i + 1
  end if
  If intRoles > = 1 then
  If instr (strRline, "has ROLES (" ") > 0 then
  intRoles = 2
  end if
  If intRoles = 2 and instr (strRline, "a of the ROLES (" ") = 0 then
  strTemp3 = MID (strRline, instr (strRline, "" "") + 1.50)
  strTemp3 = MID (strTemp3, 1, instr(strTemp3, """)-1)
  WScript.Echo arrFileLines(i-1) &"; "& strTemp3 &"; 1 "
  end if
  If intRoles = 2 and instr (strRline)",") > 0 then intRoles = 0
  end if
  end ifLoop
  objFile.Close

  UPDATE POST
  Is your on the right track, work these steps you will find glory... I force try it or needed me.

  hope helped you

  Kind regards
  Murielle.

  Published by: Kranthi.K on June 1st, 2011 02:28

• Windows Vista Home Basic 'local only' access via ADSL router, broudband

  Hello

  I've set up a new router broadband wireless ADSL to connect to my broadband PostOffice.com existing Standard.

  The router is a Belkin F7D1401uk Surf N150 model.

  It is facing up and running and I can use other machines to connect to the internet through it. A netbook running Windos XP SP3 and a mobile phone (Nokia X 6), but my laptop main running Windows Viast Home Basic SP2 (32 bit) do not have wireless internet access.

  It is a Fujitsu Siemens Amilo Li 2727 laptop. If I connect to the new Belkin router using an ethernet cable, I can connect to the internet. But when I unplug the ethernet cable and turn on the WiFi I see a connection to the modem Belkin Wireless, but on an 'unidentified network' and with 'local access' only.

  Here is a copy of what I get when I run "ipconfig/all" at the command prompt:

  Windows IP configuration

  Name of the host...: Clare-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : Belkin
  ... Description: Atheros AR5007EG Wireless Network adapt
  Physical address.... : 00-16-44-E8-64-2C
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::4d89:e63c:ba6c:1c4d % 11 (Preferred)
  IPv4 address: 192.168.2.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: April 3, 2011 15:59:55
  End of the lease...: May 11, 2147 00:41:44
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 268441156
  DHCPv6 DUID customer...: 00-01-00-01-13-A7-2B-7F-00-1F-16-00-9E-C4
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  Description...: Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address.... : 00-1F-16-00-9E-C4
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  ... Description: isatap. Belkin
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  So, it looks to me that use wireless I have an IP address and the default gateway and DNS servers are correct.
  But I do not understand why I "local access" only.

  Can anyone suggest what I can do to get my laptop connected wireless to the internet please?

  Kind regards
  David

  Hello Ttard,

  Thanks for your post.  One of the solutions, I saw about this problem is to go to your system manufacturer's Web site and download / install the latest driver for your computer wireless.

  This thread is very long, but has some great troubleshooting in steps.

  Please let us know if this information helps with your problem.

  See you soon

• Windows Home Basic Edition does not connect to a grace wireless working group

  I'm running 3 computers on a workgroup that connects to the internet. A computer running Windows 7 Pro, another Windows XP Pro and the third is a laptop running Windows 7 Home Basic.  There are full between the 3 interoperability when connected via a LAN cable, even when the laptop is connected to the wireless router.  However, if I try to use the laptop without cable, it will connect to the router wireless as an unidentified Public network and therefore does not see the Working Group (and therefore there is no internet access).

  If I click on the icon of unidentified network in the center network & sharing, I expect to be able to select the type of network, I can use - i.e. knit - but instead I get a box indicating that it is a public network, unidentified without options.  I tried to use the difficulty Microsoft it 50725 - but he said he could not change the network settings and I should change in network settings - which I can't.

  In this mode, I can 'see' the laptop on the other two computers, but its network location is black (not the working group only when connected via cable) and if I try to open up the laptop I get an error message saying: it can not find the path.

  This is a recent problem that the system worked very well upward until a couple of there are days where I lost wireless connectivity. The signal strength is 100% (the router is normally less than 30 meters, although now is 1 meter away so I can plug the cable) and there is no other networks wireless within several km.  I have a total control through my browser to the router through the wireless link wireless, the material is so everything is OK - it takes a few adjustments to the software.

  Any ideas?

  Sorry for the delay in replying, I had problems to download all the drivers the most recent, but ultimately successful.

  Uninstall and reinstall the wireless card had no effect so I started the update or replacement of all other drivers as well.

  Replace the Bluetooth driver did the trick, even if it has been disabled in advance and it is always off - but for reasons that I doubt I'll never, understand which seems to have been the problem--for now

  Thanks for the advice - it always pays to be more radical than you ever thought necessary...

• Is it possible to upgrade my windows 7 Home basic to Win7 proffosinal

  Is it possible to convert Windows 7 Home basic System [system to Windows 7 proffessional with loss of configuration data and Outlook.

  Whenever the update is available for the following

  http://Windows.Microsoft.com/en-GB/Windows7/products/Windows-Anytime-Upgrade

  As with any process of PC, your data & settings should backup before

• on Windows 7 Home Premium edition. Is it possible to determine the ip address of any remote login to my computer?

  My computer is running on Windows 7 Home Premium edition.    Is it possible to determine the ip address of any remote login to my computer?    I noticed that termservice was running, as well as the remote registry and winrm - and I began not to them.

  Thank you.

  My computer is running on Windows 7 Home Premium edition.    Is it possible to determine the ip address of any remote login to my computer?    I noticed that termservice was running, as well as the remote registry and winrm - and I began not to them.

  Thank you.

  Well quite simply a Win 7 Home Premium computer can NOT act as a host [DRC] Remote Desktop is not a problem. If you want to see if something needs to connect remotely with the help of another program you can look in the event viewer for clues...

  http://Windows.Microsoft.com/en-us/Windows/search#q=Event+Viewer

  You can also go to Start and type services.msc in the search window. Start the component services snap-in and stop these three services. Set Manual as well.

  If you suspect a virus or malware of any kind make sure you run a good antivirus program such as MSE or download and run Microsoft Safety Scanner or ESET online scanner...

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.eset.com/us/online-scanner/

• In Windows Vista Home Basic automatic updates, anti virus updates and scans, etc. are not made during the night while the computer is in sleep.

  Using Microsoft® Windows Vista Home Basic Version 6.0.6001 Service Pack 1 Build 6001, I have my computer set up to install updates automatic update and scan with my AVG antivirus 8.5 from one day to the next, while the computer is in sleep. In the morning, when I wake up the computer it alerts me that there are updates available, and I have to click the balloon to install the updates. Meanwhile my anti virus is update solange wake up also. Both are supposed to occur automatically during the night. Shouldn't these scheduled etc. updates works even if the computer is asleep?

  Hi daglo1963,

  Thanks for posting on the Forum of responses of Vista.

  When Vista is in "standby", like updating the activity is suspended.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.