Is it possible to build a program stanalone accompanied files incorporated into the program?

Similar Questions

• Is it possible to force Media Player to view files flac in the music category?

  Right now it showed that other media, its really annoying.  In addition, it seems that Media Player does not support album art for files flac.

  Thank you

  Hello

   

  The extension Flac (Free Lossless Audio Codec) isn't a type of supported Windows Media Player file. However, you can use your favorite search engine to find an application that can convert the file to a supported by the Windows Media Player file type.

   

  Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information on the types of files supported by Windows Media Player, you can also view the following link:

  Information on the types of media files that supports Windows Media Player

   

   

   

• Is Linux - possible to build a shared library that calls other libraries shared without having to make a static link to them?

  Hello

  Operating system = Linux (Ubuntu 14.04 LTS 32-bit)

  I am building a shared library *. so.  This *.so should be used by LabVIEW.  This *.so is calling other functions in shared libraries.  In my case, the other library share is libxml2 and libz.  The only way I could compile my shared library and operate was a static link from libxml2.a and libz.a.  Is there a way to make a dynamic link?

  Here's the makefile file that I use.  The goal of 'TestValidateSchema' compiles the shared without the static link library and this shared library is called by an application to test 'c' and it works.  Now, to make it work in LabVIEW, I need to make a static link, as you can see in the target ' install: «otherwise the function "call library node" throws me a symbol unresolve...»»

  This is the only way to do it and if yes why?

  Thank you

  --------------------------------

  CC = gcc

  all: TestValidateSchema

  TestValidateSchema: testValidateSchema.c
  $(CC) o Release/validateschema.o - c - wall - Werror - fpic Src / validateschema.c - I. / Include-I/usr/include/libxml2
  $(CC) - shared-o./Release/libvalidateschema.so./Release/validateschema.o
  $(CC) - wall o ./release/testvalidateschema testValidateSchema.c./Release/validateschema.o-lxml2

  clean:
  $(RM) $(OBJS)./Release/testvalidateschema./Release/libvalidateschema.so./Release/validateschema.o /usr/include/validateschema.h /usr/lib/libvalidateschema.so

  install:
  $(CC) o Release/validateschema.o - c - wall - Werror - fpic Src / validateschema.c - I. / Include-I/usr/include/libxml2
  $(CC) - shared-o./Release/libvalidateschema.so./Release/validateschema.o Src/libxml2.a Src/libz.a

  --------------------------------------

  In addition to what said Daniel on the specification of an external shared library in the liaison stage of your version of the shared library, together with the - shared option, there is still one thing to consider:

  Your library of hello.so then contains references to functions in external shared libraries libxml.so and zlib.so. When LabVIEW calls dlopen ("/ path/dir/hello.so",...) it basically hands of any control in the linker Linux running, ld.so that takes care of the rest. LD.so then try to load the shared library, recognizing that there are external references and try to solve.

  First he tries to match the missing external references to any symbols that have been previously loaded into the current process already. If this is not successful for a particular system, it queries the ldcache for a library and a symbol. ldcache is updated with the ldconfig program. When you add a new shared library on the system that you want the linker ld.so runtime in order to find, run ldconfig.

  NOTE: Running ldconfig is not normally necessary to shared libraries that access you directly via the node call library, as you specify here the full access to your custom library shared already, so path ld.so will fail immediately if it is not the library specified in the given absolute position and will not attempt to query ldcache at all.

  If you are installing packages through your package manager platform update ldcache for all publicly accessible libraries shared in these packages is usually done automatically for you as part of the package installation script. If however you manually install the libraries you need to run ldconfig yourself. In your case, you could add the libxml.so and/usr/lib zlib.so and simply run ldconfig from the command-line as it default search/lib and/usr/lib for libraries shared and rebuilt the ldcache from that. If you add your new libraries in a different directory on your computer you need to run ldconfig with - n option, saying what directory the new shared libraries have been installed.

• 2 locations to "Program Files" - one on the C partition - and another on the D partition is possible (or option) so that you can 'choose' where to install a program in particular?

  Hello

  It's my first time display questions on a forum like this, so I'll try to explain in detail what I have (somehow... :)).
  Is it possible to have 2 "Program Files" location - one on the C partition - and the other on the D partition so that you can 'choose' where to install a program in particular? I don't really want to get rid from where 'move' the 'Program Files' folder on my C partition (I just do a clean reinstall of Windows XP), BUT I would like to be able to install several programs on the partition D place on C 'by default. "

  Here's the question: I have several programs that have no option to 'choose' where should be installed - they'll automatically C\Program Files. I want to install it on the D partition. If this is not possible, how can I transfer to the new location (once they have already been installed) in their entirety so that they are functional. I don't want to keep the remains, references and 'shortcuts' on the C partition. These programs should begin to malfunction, I have freedom to wipe the D partition and reinstall the programs without messing up the heart of the system.

  I'd appreciate any help, advice and ideas. Regarding my computer experience, I'd put myself in the novice category, detailed explanations would be a lifesaver! Thank you.

  Programs come with their own setup program and the program developer decides to give the possibility to choose the download location or not

  Regarding your concern about to spoil the central system

  Whenever you install a program, that it will create many items inside your main drive where windows is installed (in this case C:\) to install a program that affects the system to another drive does not affect your system

• Is it possible to disable some programs and services in a profile, and another profile in Win 7 x 64 Ultimate has no effect?

  Is it possible to disable some programs and services in a profile, and another profile in Win 7 x 64 Ultimate has no effect? I have the profile and I went off the network and AV connection because I won't need them because I will work with a DAW in this profile.  When I connect to my profile on a regular basis that the network connection is disabled and the AV is thus disabled.  I want to eliminate any performance drain my Security Suite requires in profile, where I use the DAW.  There must be a way to do this without making all profiles.  Thank you in advance.

  Hello

  You cannot limit disabling anti-virus and network for the specific user account.

  If you are referring to other programs and applications, you should check the link below and follow the suggestions mentioned by Ronnie Vernon.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/how-can-i-limit-user-access-to-programs/0386afe2-5ec6-4965-BE06-80ccfce06113

  It will be useful.

• Is it possible to build a complete daily with muse adobe? Can you give an example pls...

  Is it possible to build a complete daily with muse adobe? Can you give an example pls...

  Moving to the Muse forum

• Is it possible to install a program in my PC and my laptop without using both at the same time. Just pay for a program?

  Is it possible to install a program in my PC and my laptop without using both at the same time. Just pay for a program?

  Hello

  You can install the software on two computers. These two computers can be Windows, Mac OS, or everyone.

  Kind regards

  Hervé Khare

• Is it possible to build a paralellagram to consider the angle that produced an image?

  Is it possible to build a paralellagram to consider the angle that produced an image?

  You can correct for tilt using free transform > Skew, or control by dragging a handle from Center.  Is that what you meant?

  

• I would like to build a drag 'n drop interface and have the results sent to my email in PDF format. Is this possible?

  I would like to build a drag 'n drop interface and have the results sent to my email in PDF format. Is this possible?

  Captivate is not really designed to do what you want in this forum.  It is more targeted to allow a user to perform an assessment and then follow whether or not they were here.  So it has really set up to send information in a format that the LMS will understand and interpret as Pass/CNET and what the score was.

  You really need something more flexible than that. So I think you would need to involve a programmer and have the solution custom made.  From my experience, whenever you try to dismiss what Captivate, it was designed to do and you need to involve the other professionals, you can kiss thousands of dollars goodbye before you have a viable solution.

• Is it possible to save revenue by program to an excel file without overwriting the previous entry?

  I want to record the revenue of every four hours in an excel file without overwriting the previous entry.  It would work like a button "save under", but instead enter a new name, the name of the recipe as well as the date and time is what the file would be saved under.  Any thoughts on whether this is possible, or how it can be accomplished would be great.

  Everything looks good except for a minor detail that perhaps with that you could help me.  Instead of naming the file "data", I want to use the contents of cell C1 to datatable name.  I could do in the argument Filename = or should I use an expression.

• Is it possible to import metadata into the prelude to a source file that is created in one program other than Live Journal?

  I'm looking to connect 12 football with Prelude games TV shows so it will be easier to find clips of archive in the future. I hope I do not have to log the 3 hours more games manually if I can. I have an xml file of the game on our application of statistics for each game. If I could only import the XML data into prelude, it would be a considerable time saving on full manual logging files. All the tutorials, I watched it seems that you can only import metadata from XMP files created by the on-line Logger iPad app. Is there a way to convert another type of XMP file appropriate to import them into prelude? Or any other work around for import data?

  HI -.

  You can convert your XML in XMP file - then that import directly as a prelude with no associated metadata Panel. But prelude has no built in conversion tools to switch your XML in XMP format.  Writing a translator script is possible, however, if you have the inclination and the time. As long as the end result is formatted metadata XMP prelude can import and apply the cue points in the appropriate places to you.

  Kind regards

  Michael

• How to include a .wav file with vi the use of the application builder?

  Hello

  I am developing an application that uses a .wav file. I want to compress this file along with the vi in an executable so that the end user has a single file to run it.  Is it possible to add the .wav file to the executable using Application Builder? Moreover, to do this, can we configure the path to the .wav file in vi to always search for the file in the installation folder (for example: C:\Program Files\E2C\MSK or according to the user installs the executable folder in)?

  Thank you

  Anvy

  Anvy,

  It is not possible to compile a wav file in an executable file using LabVIEW. You can include the wav file in the project and include it in "still included" in your build script that will copy the file in the folder wav data from your executable file. So it is quite easy to distribute the wav with your exe file, even if the wav is not in the exe file.

  hope this helps,

  Norbert

• Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  Hi all

  Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  I did program mentioned above but it does not work. Can you tell me what is the problem?

  There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

  I have attached my program with this message.

  Thank you in advance!

  (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

  (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

  (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

  (4) you need to finish the lookup table (table 3D)

• There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  Hi, I m a bit new in LabVIEW and I'd like to ask a few questions...

  -There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  -One API PI or raspberry beaglebone exists for LabVIEW?

  -Power supply Wich can recommend you control with LabVIEW? (some chip solution witn 0 - 30v / 0 - 3A DC)

  Thank you very much for your advice!

  Best regards

  Elena

  Elena,

  I know raspberry, so no comment on that.

  For the rest:

  -Do you want to create tools for developers? If so, we must look in the API of project VI and VI server. If this isn't the case, please compile your application LV as executable and call this one using a batch file.

  -LV prefer specific supplies. LV is a programming language. There are several power supply providers (including OR) which provide directly the LV API for their power supplies. So, essentially, the approach is:

  1. choose food that serves your needs.

  2. check if the power supply has a standard interface for programming (such as Ethernet, GPIB, or if the power supply is PXI, is already providing a programming interface!)

  3. check if the LV API (so-called "instrument driver") is available for the device. In the case of a PXI system, get you a device driver (for example NI DCPower).

  4. check if the LV samples are available (for example in the Finder for example LV once you have installed the driver).

  Norbert

• Is it possible to delete an account off Xbox 360 without deleting the whole account?

  Original title: those of Xbox and Xbox 360

  Is it possible to delete an account off Xbox 360 without deleting the whole account? I want to just that this account off certain Xbox

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.