Is it possible to change the function of the buttons play/Pause on Satellite P100-347

Similar Questions

• Is it possible to change the graphics card on my Satellite L40

  Is it possible to change the graphic card geforce 8600 on my Satellite L40.

  No, this is not possible because mobile GPU chips are not extensible.
  The chip is mounted and soldered on the motherboard.

  Good bye

• Cannot send the Dolby Digital XP on Satellite P100-347

  The problem I have is that I can't get the Dolby Digital to send from my laptop to my amp, apart from the use of the library. I have the portable (Tosh P100-347) connected to my amp via a SPDIF cable.

  Basically, in Media Center, I am able to change the settings, so that the amp captures the Dolby Digital signal, during playback of a DVD from the laptop, however, I am unable to get this transmitted signal during playback (HDTV) videos that are stored on my laptop. I know they are encoded with dolby digital.

  Also, if I use another player media, such as media player and media player classic, I'm not able to get the signal digital dolby conveyed either.

  I took a quick glance and think I have changed what is necessary, but still can't find anyway to do. I would get this sort you like playing HDTV content from my laptop and also play the latest games in dolby digital when available.

  Help, please.

  Hello

  Check please the sound properties in particular speakers and under Advanced settings, select speakers 5.1 surround sound.

  I hope this will be help!

• Control edge file animate OAM with the buttons play/pause of Captivate on the skin.

  Hello world

  I worked on a project where I mix a variety of objects and animations.  I do animations animate on board.  The problem I have is that when the user clicks the button pause on the Captivate playback controls, the oam file do not pause.  I found descriptions of how I can make an animation to play/pause the Captivate timeline button on board, but I can't find anything on the use of the Captivate pause button to control the Edge file animate.  Discussions only that I managed to find on that seem to be the answer.  Someone had a bit of luck with this question?

  Any advice would be appreciated.

  Thank you

  Randy

  OK, it's a bit hacky, but it works quite to control the main timeline object in a file of edge of Cape Town, where the Edge file has been imported to Cap 9 as a Web (oam) object. I went seeking answers same like you and came from vacuum, then start to tinker myself and came across the following method.

  Let's use window.postMessage to send a string between Cape document window and document edge iframe window then react accordingly. You can learn more about postMessage accepted battery answer here: http://stackoverflow.com/questions/3076414/ways-to-circumvent-the-same-origin-policy

  In your dashboard file click the support of Actions for the stage object in the timeline and select the compositionReady event. Paste this code into the text window:

  addEventListener for Chrome, attachEvent for IE

  window.addEventListener ('message', receivedFromCaptivate, false);

  window.attachEvent ('onmessage', receivedFromCaptivate);

  function receivedFromCaptivate (event) {}

  switch (event.data) {}

  case "play":

  SYM. Play();

  break;

  case "pause":

  SYM. Stop();

  break;

  }

  }

  Save the file and publish it as an oam, then import the OLS in a slide of Cap, as you normally would. Now, to put in place things of the CAP. Here is a visual aid for the rest of the explanation...

  

  In the PAC file select the control that you use to start playing the chronology of the edge (in the example above the "slide4Play"), select the checkbox 'Use as button' in the properties on the right, select the "Actions" tab, then to the drop-down list for 'Success' choose "Execute advanced Actions." Click the folder next to the selection of Script control and advanced Actions dialog box should appear. Name your action something (for example, "playEdgeSlide4"), then click the 'Add' in the grey bar to add a new action in the queue. In the drop down "Select Action"... ", choose"execute Javascript. "In the drop down menu"select the window... ". ", choose"current ". Then click on the 'Script_Window' button to bring up a window of text Javascript crap. In this window, you can paste this:

  try {}

  $("iframe") [0].contentWindow.postMessage ("play", "*");

  } catch (e) {}

  Console.log (e.message);

  }

  Select 'OK' to close the window of text Javascript crap, then click the 'Update Action' button to save your new action. Now let's do the same for break action - select the control that you use to pause, go through the steps above, the name of the action, implement advanced action in the same way and in the Javascript crap text window, paste the following text:

  try {}

  $("iframe") [0].contentWindow.postMessage ("break", "*");

  } catch (e) {}

  Console.log (e.message);

  }

  Cap incorporates the Edge file in an iframe on the page that has its own document window. In order to communicate between base ceiling windows and the iframe, we use the postMessage call. So when you hit your button Pause/Play in Cape Town, he publishes an event to the function that gets recorded in the iframe on board. And in the event.data is the string we send above the Cap base window in the function postMessage ('play' or 'pause'). We use a simple switch to react to the data string, stop or have fun with the main symbol of the scene at the edge (sym.play(1000) (), sym.stop ()).

  I hope this helps!

• How to install the OS on my new Satellite P100-347?

  Hello!

  I just bought a P100-347 last Friday. It was the last cell of its kind in the shop where I bought it and as if I find myself with a view model.

  No problem with that, the laptop is in very good condition, the only problem is that whenever they took the view that they re-installed the operating system and so they add a password to the administrator account (which XP is created whenever the OS is installed).

  I contacted the store to ask for the password and they say, they do not know (or that they do not want to give him...).

  What should I do now? Format the drive and run the Toshiba recovery cd to reinstall the OS? Is the operating system that is included on the product recovery CD? If I re - install the operating system, I can give a new password?

  Thank you.

  Hello Tiago

  The best thing you can do is to install the new OS. To make this recovery delivered using DVDs please. Recovery DVDs contains the operating system, all the drivers needed and of course all the Toshiba designed tools and utilities.

  After that this laptop will have factory settings again and you can configure OS and set your own password.

  If you need assistance please write again.

  Good bye

• Satellite Pro M70 - ist is possible to change the craphics controller?

  Is it possible to change the graphics controller to my Satellite Pro M70...
  If so, where to buy a new one?

  THX

  Hello

  Well, in general it s is not possible to replace or update the graphics card.
  But I compared a Satellite Pro M70 unit because this series of laptop was delivered with different hardware configurations and I found that these installed graphics cards:
  Mobile Intel 915GM Express Chipset AlvisoGM 8 MB to 128 MB shared video memory
  ATI MOBILITY RADEON X600SE 128 MB of video memory
  ATI MOBILITY RADEON X 700 256 MB of video memory

  However, in my opinion you can not change the graphics card

• Is it possible to change the menu of windows update to the much more functional version?

  Is it possible to change the menu of windows update to the much more functional version? The change took place on 07/10/09 and made by selecting which updates to install more troublesome. * Note * I do without roll back Windows Update 7.4.7600.226 Agent that has been installed on 10/07/09.
  This change of format is also just change the switch on for windows 7?

  Hello

  Welcome to Microsoft Windows Vista community forums!

  I am sorry to say that there is no choice left out. You must perform a system restore or uninstall the manual update that is installed.

  Improvements made to the version of the Windows Update Agent 7.4.7600.226

  • Time sweep improved for Windows updates
  • Improved user interface for Windows Vista and Windows Server 2008 - based computers that are running Windows Update
  • More visible and detailed description of updates
  • Improvements in the way in which users are informed about service packs

  For more information, please see the link below:
   
  http://support.Microsoft.com/default.aspx/KB/946928

  Kind regards

  Savan - Microsoft technical support.

• Possible to change the contents of text inside the group frame?

  Hello world

  I'm newbibe to Indesign forums.

  I had grouped image placed on the rectangle frame and the text. now I need change content text frame using indesign Javascript

  Possible to change the content of text inside the group frame... ?

  -yajiv

  Hello

  Try the following lines.

  main();
  
  function main() {
  
      if  (app.documents.length != 0  &&  app.selection.length == 2 ) {
          if( app.selection[0].constructor.name == "Group" && app.selection[1].constructor.name == "Group" ) {
              var sel1 = app.selection[0];
              var graphics1 = sel1.allGraphics[0].itemLink;
              var text1 = sel1.textFrames[0].contents;
  
              var sel2 = app.selection[1];
              var graphics2 = sel2.allGraphics[0].itemLink;
              var text2 = sel2.textFrames[0].contents;
  
              sel1.textFrames[0].contents = text2;
              sel2.textFrames[0].contents = text1;
  
              var fP1 = File( graphics1.filePath );
              var fP2 = File( graphics2.filePath );
  
              graphics1.relink( fP2 );
              graphics2.relink( fP1 );
          } // if
          else {
              alert ( "Select 2 groups!" );
          } // else
      } // if
      else {
          alert ( "Wrong selection!" );
      } // else
  } // main
  

  Although it might work for you, it is probably not advisable, because if you apply other content on the chassis, you modify the content, but not the formatting. Even with the restoration of the links of the images.

  So a better solution may be, separate frames, move them and group them back.

• Is it possible to change the sensitivity of the mouse in the sierra?

  Is it possible to change the sensitivity of the mouse in the sierra?

  Open system preferences > mouse

  See: Customize your mouse > the basics of the Mac: set your preferences - Apple Support

• Is it possible to change the playlist view back to display columns on iTunes?

  Is it possible to change the playlist view back to display the columns?

  View > view as > songs.

  TT2

• Is it possible to change the external color of the iPhone?

  I wanted to know if its possible to change the external color of the iPhone. My mother bought a pink iPhone, but she could not get used to it, so she gave it to me, and I want to know if its possible to pass to a rose grey.

  Thank you.

  None

• Is it possible to change the default channel strip settings?

  Is it possible to change the default channel strip without having to depend on models?

  For example, I always wish to have:

  • Follow the value Name = 3 lines instead of the default line 1.
  • 'Follow the icons' checkbox deselected
  • Always follow box color
  • Control surface Bars always deselected

  Stuff like that... This apples to any screen that is affected by the Configuration of channel strip window. (View mixer or titles).

  Thank you!

  Is it possible to change the default channel strip without having to depend on models?

  NO.

  But why not use a template? You use a template of this moment anyway, the default value of project. Just change and set the Start Action that you configured

  

  Fact

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Starkey Halo 2 passes to 'Flow Boost' memory state when the iPhone received incoming calls.   Is it possible to change the setting.

  I just got my Halo 2 a few days ago Starkey.  I noticed that when I get incoming calls on my iPhone 6, Halo 2 switches in position of memory 'Stream Boost' that increases the volume and picks up a lot of background noise.  Is it possible to change the default iPhone meets the memory of another parameter memory.

  No, you should contact the developer of the application to this topic.

• Is it possible to change the order/priority of tags?

  Is it possible to change the order/priority of tags?
  I use this feature of hundreds of times every day.
  Thank you
  TERI

  I don't know, but maybe this add-on meets your needs https://addons.mozilla.org/en-US/thunderbird/addon/tag-sequence-arranger/?src=search

• possible to change the font size of the bookmark toolsbar?

  possible to change the font size of the bookmark toolsbar?
  upgrade to firefox v22 and notice this bookmark toolsbar got bigger, some bookmark font cannot be displayed, it is normal? possible to change?

  Hello

  Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution.
  You can adjust the resolution of your screen.
  To change it follow these steps:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.