Cannot send the Dolby Digital XP on Satellite P100-347

The problem I have is that I can't get the Dolby Digital to send from my laptop to my amp, apart from the use of the library. I have the portable (Tosh P100-347) connected to my amp via a SPDIF cable.

Basically, in Media Center, I am able to change the settings, so that the amp captures the Dolby Digital signal, during playback of a DVD from the laptop, however, I am unable to get this transmitted signal during playback (HDTV) videos that are stored on my laptop. I know they are encoded with dolby digital.

Also, if I use another player media, such as media player and media player classic, I'm not able to get the signal digital dolby conveyed either.

I took a quick glance and think I have changed what is necessary, but still can't find anyway to do. I would get this sort you like playing HDTV content from my laptop and also play the latest games in dolby digital when available.

Help, please.

Hello

Check please the sound properties in particular speakers and under Advanced settings, select speakers 5.1 surround sound.

I hope this will be help!

Tags: Toshiba

Similar Questions

  • How to install the OS on my new Satellite P100-347?

    Hello!

    I just bought a P100-347 last Friday. It was the last cell of its kind in the shop where I bought it and as if I find myself with a view model.

    No problem with that, the laptop is in very good condition, the only problem is that whenever they took the view that they re-installed the operating system and so they add a password to the administrator account (which XP is created whenever the OS is installed).

    I contacted the store to ask for the password and they say, they do not know (or that they do not want to give him...).

    What should I do now? Format the drive and run the Toshiba recovery cd to reinstall the OS? Is the operating system that is included on the product recovery CD? If I re - install the operating system, I can give a new password?

    Thank you.

    Hello Tiago

    The best thing you can do is to install the new OS. To make this recovery delivered using DVDs please. Recovery DVDs contains the operating system, all the drivers needed and of course all the Toshiba designed tools and utilities.

    After that this laptop will have factory settings again and you can configure OS and set your own password.

    If you need assistance please write again.

    Good bye

  • Is it possible to change the function of the buttons play/Pause on Satellite P100-347

    Hello.

    I would like to would like to know if there is a way to change the play / pause button on my phone to stop the opening of windows media Center. I like to use itunes to listen to my music and the other buttons (back, forward and stop), all work with other programs, but there is no way to use the play and pause function without opening of the Media Center.

    It seems that you can only change the internet and function of CD/DVD in the Panel.
    Thanks in advance.

    Hello

    Just reply: no, not possible to change playback / pause feature keys s

    The Toshiba control utility offers two options.
    It allows you to assign and select a program for the internet button and touch CD/DVD.

  • (1) acrobat cannot send the DDE command. (2) adobe air does not download the latest version

    (1) adobe acrobat pro can not open and always send message fatal errow "Acrobat cannot send the DDE command '.

    (2) one.    Adobe Acrobat cannot open because adobe air cannot successfully download the latest version
    Reader adobe b. cannot create PDF because adobe air cannot successfully download the latest version

    Hello

    ·         What operating system is installed on your computer?

    ·         Did you do changes on the computer before the show?

    Question 1: Acrobat could not send DDE command

    Try to launch acrobat in safe mode, follow the steps:

    a. press on and hold the SHIFT key and double click on the acrobat icon and open a pdf file.

    b. If it opens without crashing after about 15 seconds, then you have a faulty plug in, locate and remove it from your plug-ins folder.

    c. to remove the plug-ins, you can contact the Support of Acrobat

    Question 2: Adobe air download does not last

    You can try to Uninstall and reinstall the program.

    Let us know if this information useful.

  • Cannot send the UDP datagram with device 8320 (V4.2.2.180)

    There is a post says "Cannot send the datagram UDP with JDE 4.5" to

    http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=14528&view=by_date...

    In the emulator of JDE4.2 it really works, but he meets the same problem in the blackberry8320 (V4.2.2.180) device, get the same java.io.IOException (detailMessage = null) to the send() operation;

    I looked in the (accessible via wifi) PC with a tool named Sockettool (it can create the client and Server TCP/UDP), it can be connected to the emulator and receive datagrams sent to the emulator, but can not be connected to device.

    Is this a problem related version too?

    Appreciate if you can share your experience with datagram connection to the device.

    Here is my code:

    Emulator: host = "udp://iport1; port2.

    Feature: host = "udp://iport1; port2 /; = wifi interface.

                    try {
                        udp_client = (DatagramConnection) Connector.open(host);
                        byte[] data = {65,66,67,68};
                        int len = data.length;
                        dg_out = udp_client.newDatagram(data, data.length);
                        udp_client.send(dg_out);
                        udp_client.close();
                }catch (Exception e) {
                        System.out.println("UDP Exception:"+e.getMessage());
                    }
    

    If the application is able to send and receive UDP traffic in the BlackBerry Simulator, but not on a BlackBerry real pocket computer the first thing to check is to check that your carrier supports.  Several carriers do not support UDP traffic or restrict to specific ports or data types.  This can cause exceptions or make it appear that the application will silently fail (carrier is just dropping packets).

  • Cannot be accessed by Satellite P100-347 after the password of BIOS setting

    My friend has recently created a startup password using the numeric keypad and now I can't access my satellite P100-347 beyond startup even if am to enter the correct password!

    Is there anyway around this problem?

    Hello

    Bad sorry :(

    Unfortunately, you must contact the ASP in your country for this problem.
    Technicians have first remove this BIOS password.
    In addition, I think that to avoid this problem, the BIOS must be updated to version 2.40 or higher and also the Toshiba utility must be updated to version 1.8.14.2 or higher.

    Good luck

  • On my Satellite P100-347 cooling fan runs all the time

    Hello

    I think I might have a problem with the fan on my Satellite P100-347. He seems to be constantly works constantly and is much stronger than when I bought the computer. Initially he just spent and if so, I think that this could now be wrong.
    Help, please.

    Hi Beata

    I agree with the suggestions of Sanremo; He s I don't known how old your laptop has but from time to time it of necessary to clean the cooling fans. Dust and debris inside the laptop could prevent the cooling modules work properly!
    The fresh air flow is also very important. Don't forget that there is enough free space around the laptop. Do not use the laptop on the lap or in the bed. In this case the laptop cannot be cooled in the right way and the high temperature can damage parts such as GPU to the Board of Directors.

    But if you think that there is a serious hardware problem you must contact the service provider authorized in your country.

    Good luck and greetings to Poland ;)

  • Satellite P100-347 - problem with the judgment during the game

    I have a problem with my (pspa6e) Satellite P100-347

    After about 10 minutes of play time with games like battlefield 2, the SIMS2 and so on... my pc stops...
    I knew it was close because of high gpu or cpu temp...

    I felt that my laptop was warm, but after playing for a while its normal...

    So I installed HWmonitor to check my gpu, CPU and disk hard temp...

    That's what I show:

    THRM: 61.C - 141.F

    CPU: core0\1 - two 64.C - 147.F

    GPU: turn 85 stable - 90.C
    This normal use... no games...

    HARD DRIVE: 39.C

    Something must be wrong! GPU temp is too high?
    I tried a fresh install of the OS...

    Thnx for all the help and answers!

    Hmm these times can be a little high.

    Most likely there is dust in the radiator. You can use compressed air to remove it. Or as a miracle solution, blow into the vents dust closes in contrast to air circulation.

  • Satellite P100-347 with Vista Premium in the United Kingdom

    I am looking to buy the Satellite P100-347, but I want to get with Vista Premium - no upgrade.
    Does anyone know when this machine will be available with Vista Premium in the United Kingdom.

    Thanks in advance

    Joel

    Hello Joel

    I heard that Toshiba will start notebook with Windows Vista at the end of January 2007. Perhaps the United Kingdom will be starts earlier (perhaps it is also a country, I put t know exactly).

    As you know Vista comes with several different versions, but it will be preinstalled on P100, no one can tell you with certainty.

  • How to turn off the lights under speaker on Satellite P100?

    I need to know if it is possible to TURN OFF the blue led underlight. (under the harman/kardon repro)
    laptop SATELLITE P100-387
    I dod not find it in Control Panel.

    Help, please

    Hi petr

    No, it of not possible to disable the legal average speaker lights.
    I guess it could be possible to detach any connection cable or something similar, but it would avoid your warranty!
    I put t really recommend doing that!

    I would not risk my warranty

  • How to find the exact motherboard for Satellite P100-347 model?

    Hello
    I hope someone could help me. I'm looking for a new motherboard for my computer toshiba laptop because it replaced needs.

    I own a laptop Satellite P100-347 of pspa6e-03302cen and have not been able to find this anywhere online forum. Although I found two suppliers of many motherboards of p100, they use numbers of alternative model in which I can't find anywhere in my documents or on the computer. The model numbers they use are something like A000008350 or a number starting with k. I'm sure that the supplier I found has the motherboard, I would need but I would need a list of all the numbers of the other party for my laptop, or a way to find the exact numbers. Any help on this is appreciated...
    Thank you

    To be honest I really don't think that someone here can offer you this info. As you know, this info is for internal use and you can try to get this info from service provider authorized in your country. Sorry, but I don't see a better solution, except to wait here and hope someone can help.

    Good luck!

  • Satellite P100-347 - nVidia drivers day?

    Can support Toshiba fix some vista updated drivers for:

    Satellite P100-347... (pspa6e)

    This should be up to date on Toshiba site, because the drivers on
    NVIDIA.com do not work on my Toshiba laptop...

    Thnx

    It is well known that manufacturers of graphics support pages downloaded drivers cannot be installed on laptops. Each laptop manufacturer must ensure that display driver works well on the specific cell phone model and will not force the graphics card to run on the highest level.

    I hope you understand why laptop manufacturers do this.

    In any case, you can just hope that your message will be read by the Toshiba support service. ;)

  • Instant stopping and restarting on Satellite P100-347

    My satellite P100-347 maintains close instantly then restart. All the solutions because its still new and very expensive for a replacement.

    Hello

    It seems that your machine is overheating and then he made a stop for reasons of physical security.
    You said that it happened when you play NFS carbon, it is a good sign for a cpu/vga heat problem.

    I suggest you to clean your fan and your cooling system, because when it s clobbed with of the dust of the system cannot be properly cooled and it is stopped to avoid serious damage to your valuable equipment. Just be a can of compressed air and clean your cooling system (but gently, otherwise you may damage the fan who convey the air that is heated from cpu/vga)

    Just a question: what drivers are installed for your vga? You have the original toshiba display drivers? If this isn't the case, then the problem is self explaining because schedules of the original nvidia/ati drivers are not suitable for laptops.

    Welcome them

  • DVD drive does not burn/erase RS - Satellite P100-347

    Hello

    I bought a Toshiba Satellite p100-347 PSPA6E laptop computer. It has a DVD burner with model number: HL-DT-ST DVDRAM GMA-4082N (firmware pt06). It has capabilities to burn any DVD (please see example using dvdino: http://tinyurl.com/2hbpqv).

    However, I can't rewrite on my Maxell dvd + rw (1.4 x speed) dvd. whenever I go to a software application to erase a dvd that I wrote on, it says unrecognized format. For example, Nero says "this disc is not rewritable and therefore can not be deleted. Please insert a rewritable disc.

    The disc is rewritable because it says on the cover and also it burns on my friends rewritable dvd burner :(

    Please can anyone help:(je suis vraiment coincé et il serait beaucoup aprécié)

    JAS

    Hello

    As you probably know, readers don t support all kinds of media.
    I mean not every CD - R, DVD - RW, CD + RW, DVD + RW, and so on, average is supported.
    I can confirm these issues in my practical knowledge I tested for several months and many media, I use the TDK on my laptop and only CD or DVD media.
    They work best with my drive...

    But I'll give you a tip:
    You should remove other software burning like sonic, etc if you use Nero. The joint software sometimes makes trouble.

  • Satellite P100-347: Blue Leds - they disabled/disabled?

    I read several topics in the forum on the P100 Harman/Kardon speakers Blue LEDs/lights. None expressed a definitive answer on how to turn off the LEDs.

    I was wondering if a new update on this issue has occurred. The last post of forum about this was in February. Is it possible to turn off those annoying lights in newer models of Satellite? I would disconnect the wires so its an easy task.

    My laptop is the Satellite P100 - 347 (SPA6E)

    Thank you very much

    Hi Dan

    Have you used advanced search forum?
    I don t think so!

    I have used and found several discussions on this topic.
    I searched in the section P satellite for blue light and learn from these publications:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16008&MessageID=58569
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19701&MessageID=72256

    Then why write something that has already been discussed here in the forum?

Maybe you are looking for