Is it possible to change the message of the automated controls?

Hello

In APEX 4.0, depending on the element type you create and the settings you put, some validations are done automatically as a check of the date when you use a date picker.

My question is, is it possible to change this message? Because what happens is, if I have a certain format in the way I formulate the message then these validations will be formulated in a different way.

Hello

Yes, it is possible to translate or replacement of these messages.

You can find all Messages that require an internal translation in the official documentation.
Here's a link: http://apex.oracle.com/i/doc/global_mess_reports.htm#CHDEDHBJ

Translation of messages:
-1. Go to the page request to translate:
1. on the homepage of the workspace, click the icon of the Application Builder.
2. Select an application.
3. click on shared components.
4. by globalization, click SMS.
-2. the page to translate Messages, click on create.
-3. Identify Text Message, specify the following options:
1. name - enter the name of each message to be translated. See table: internal Messages that requires a translation.
2. language - select the language that the message would be used.
3. text - enter the text to be returned when the text message is called. If the English text message contains values of positional substitution (for example, %0, 1%), check that your QAnywhere pre-defined message also contains the same name and number of substitute positional values.
-Create a 4.Click.

-----
Louis-Guillaume Carrier - Bédard
http://www.lgcarrier.com
http://www.apexframework.com

Tags: Database

Similar Questions

  • Is it possible to change the indicator/control according to enum?

    Hi all. I'm rather new to LabView, and I'm doing a program for a robot that can run virtual, so without a DAQ or whatever it is connected and therefore has a toggle entry. But he should also be able to run 'real', so, with the acquisition of data, and thus controls should be replaced by indicators. Is it possible to do or not?

    jdepypere wrote:

    Hi all. I'm rather new to LabView, and I'm doing a program for a robot that can run virtual, so without a DAQ or whatever it is connected and therefore has a toggle entry. But he should also be able to run 'real', so, with the acquisition of data, and thus controls should be replaced by indicators. Is it possible to do or not?

    Not until your VI is running. However, you can do so using VI scripting.

    https://decibel.NI.com/content/message/39353

    BR,

    / Roger

  • Is it possible to change the alert message default javascript '1 article has been added to your basket' to something nicer?

    Hey BC Community!

    Well, I may have missed in the docs (and if I have, please do not hesitate to show it to me) but I was curious to know if it was possible to change the default javascript alert popup that says "1 item added to cart" to something more pleasant as perhaps a green bar that temporarily shows downstairs which said "added to shopping cart." I would create a jquery script to intercept the default alert?

    Thanks in advance for anyone of you guys help!

    Hello

    Have you already checked this

    Customization of shop alert stations online

  • Is it possible to change the default font in the Mail application?

    I use the native Mail application on my Pro 9.7 "iPad. Is it possible to change the default font for new messages and replies?

    N ° police cannot be changed.

  • Is it possible to change the ToolTips delay?

    Hello

    I often find the easiest way to distinguish it from the similar windows on the taskbar is by the complete path provided in the ToolTip. However, with the display of thumbnails enabled, you must first hovering over the taskbar button, there is a slight delay before the thumbnail appears, there is a longer delay before the ToolTip text appears. Once the thumbnail appears I can move the cursor on the other buttons bar tasks and their thumbnails appear instantly, but there are still delays for the ToolTip text. It becomes quite boring.

    Is it possible to change the deadlines so that a) the thumbnail appears a little faster, and b) the ToolTip appears much more quickly (preferably at the same time as the thumbnail)?

    There are other places in the UI I want tooltips to climb faster. For example in Explorer or on the desktop, in some views, the full name is too long to see if I need the ToolTip to read. Is it possible to change the tooltip thus delays?

    Personally, I prefer to have ToolTips set up instantly and maybe a way to make them disappear if they get in the way. In fact, what Windows needs is a status bar as at the bottom of most browser windows. Then, there would be a permanent area to display additional information without cluttering the user interface. Too bad Windows 7 doesn't have it.

    Thank you.

    OK, are you up to now?

    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\TrayNotify]
    "BalloonTip' = dword:0000000 has

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • Is it possible to change the sensitivity of the article to look?

    Is it possible to change the sensitivity of the article to look?

    N ° which seems to be the problem?

    Bob

    ethornburg <> [email protected]>

    Tuesday, December 11, 2012 14:30

    >

    Is it possible to change the sensitivity of the baggy from the

    Article by article?

    created by ethornburg http://forums.adobe.com/people/ethornburg> in

    / Digital Publishing Suite /-discover complete discussion

    http://forums.Adobe.com/message/4913080#4913080

  • Possible to change the variable cpQuizInfoPassFail through advanced actions?

    Is it possible to change the variable cpQuizInfoPassFail through advanced actions? I do not see this or the other quizzing variable when I try to create an advanced action and change by entitlement or expression. Let me explain what I want to accomplish, I ask the wrong question. I have a training project, with that I need to include a post test. I don't really like the captivate quizzes. I want the post-test to play as a ride on jeopady where the user chooses issues category and gets points if the user answers correctly. For this I must ask questions on a game board and (from what I can fig) you cannot have multiple questions on the same page. I'm building the quiz with my own custom variables and coded so that the program jumps to a page of the certificate if the user gets more than 84 points. THA all works very well. But I have to be able to tell the database that the program will connect with the user has passed the quiz. I thought I could do this if I assign the value 1 to the variable cpQuizInfoPassFail. Is there a way to do this? Thanks in advance for any help,

    Doug Jackson

    Hi Doug,.

    I don't see the version you are using. Each interactive object can be marked, has a report following properties in the control panel (if you use CP5 or CP5.5) or a tab in the Properties dialog box reports, if you use a different version. You must add a score (default value is normally 1 point) and make sure you add it to the total score.

    If you want to make me a glance, post your file on acrobat.com (free, use your Adobe ID), share and publish. You will have a link that you can copy into a private message to me.

    Lilybiri

  • Is it possible to change the sensitivity of the mouse in the sierra?

    Is it possible to change the sensitivity of the mouse in the sierra?

    Open system preferences > mouse

    See: Customize your mouse > the basics of the Mac: set your preferences - Apple Support

  • Is it possible to change the playlist view back to display columns on iTunes?

    Is it possible to change the playlist view back to display the columns?

    View > view as > songs.

    TT2

  • Is it possible to change the external color of the iPhone?

    I wanted to know if its possible to change the external color of the iPhone. My mother bought a pink iPhone, but she could not get used to it, so she gave it to me, and I want to know if its possible to pass to a rose grey.

    Thank you.

    None

  • Is it possible to change the default channel strip settings?

    Is it possible to change the default channel strip without having to depend on models?

    For example, I always wish to have:

    • Follow the value Name = 3 lines instead of the default line 1.
    • 'Follow the icons' checkbox deselected
    • Always follow box color
    • Control surface Bars always deselected

    Stuff like that... This apples to any screen that is affected by the Configuration of channel strip window. (View mixer or titles).

    Thank you!

    Is it possible to change the default channel strip without having to depend on models?

    NO.

    But why not use a template? You use a template of this moment anyway, the default value of project. Just change and set the Start Action that you configured

    Fact

    Edgar Rothermich - LogicProGEM.com

    (Author of "Graphically improved manuals")

    http://DingDingMusic.com/manuals/

    "I could receive some form of compensation, financial or otherwise, my recommendation or link."

  • Starkey Halo 2 passes to 'Flow Boost' memory state when the iPhone received incoming calls.   Is it possible to change the setting.

    I just got my Halo 2 a few days ago Starkey.  I noticed that when I get incoming calls on my iPhone 6, Halo 2 switches in position of memory 'Stream Boost' that increases the volume and picks up a lot of background noise.  Is it possible to change the default iPhone meets the memory of another parameter memory.

    No, you should contact the developer of the application to this topic.

  • Is it possible to change the order/priority of tags?

    Is it possible to change the order/priority of tags?
    I use this feature of hundreds of times every day.
    Thank you
    TERI

    I don't know, but maybe this add-on meets your needs https://addons.mozilla.org/en-US/thunderbird/addon/tag-sequence-arranger/?src=search

  • possible to change the font size of the bookmark toolsbar?

    possible to change the font size of the bookmark toolsbar?
    upgrade to firefox v22 and notice this bookmark toolsbar got bigger, some bookmark font cannot be displayed, it is normal? possible to change?

    Hello

    Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution.
    You can adjust the resolution of your screen.
    To change it follow these steps:

    • Type of topic: config in the Firefox address bar and hit the Enter key.
    • If the warning that this might void your warranty , click I'll be careful, I promised.
    • Search for layout.css.devPixelsPerPx

    • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

    If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

    If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

    To adjust the font size for the user interface, you can use the extension of theme font & size changer .

    This solve your problems? Please report to us!

    Thank you.

  • Satellite Pro M70 - ist is possible to change the craphics controller?

    Is it possible to change the graphics controller to my Satellite Pro M70...
    If so, where to buy a new one?

    THX

    Hello

    Well, in general it s is not possible to replace or update the graphics card.
    But I compared a Satellite Pro M70 unit because this series of laptop was delivered with different hardware configurations and I found that these installed graphics cards:
    Mobile Intel 915GM Express Chipset AlvisoGM 8 MB to 128 MB shared video memory
    ATI MOBILITY RADEON X600SE 128 MB of video memory
    ATI MOBILITY RADEON X 700 256 MB of video memory

    However, in my opinion you can not change the graphics card

Maybe you are looking for