Is it possible to change the Type of report?

Similar Questions

• Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

   
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads
   

  Hope this information is useful.

• Can you change the type of device to 'USB Raw resource' to GPIB controller?

  I'm trying to configure a GPIB FL Contec GP - IB (USB) controller in MAX.  I could so he can register through the creation of a pilot of the Assistant driver VISA, but it fits as a "gross resource USB" rather than as a GPIB controller.  I can send and receive information from the controller, but it does give me an option to search for connected devices of GPIB communicate with them.  Is it possible to change the type of the device, maybe by manually changing the driver created by the wizard of the NI-VISA driver?  Thank you for your time.

  N ° do not use MAX at all. You can just create a GPIB-USB controller on your own. You should contact the seller.

• Change the type of adjustment layer?

  Hello

  If I create an adjustment layer (for example: curves) is it possible to change the type of release later?

  For example: create an adjustment layer curves & then change the type of adjustment to levels instead.

  You can't exchange adjustment on the created adjustment layer type.

• change the type of a pageitem

  Hello

  I'm developing an indesign extension with flash builder aand cs extension builder 2.

  is it possible to change the type of a pageitem? I ve found some textframe empty and I want to convert in the form...

  Thank you

  Simon

  Change the contentType.

  Substances

• change the type of legend

  I'm a captivate user in training.
  My settings created text captions, legends of suspicion (overview) and legends of failure when I recorded my video training, which has been authorized. I was tasked to remove text captions, but the legends of suspicion. Suspicion of legends seem to be the same as the legends of overview and I do not want to display on a roll - I want that they on the slide, most of the time. Is there a way to change the caption type without having to create all new? Better yet, is it possible to change the type of all the captions at the same time?
  Legend properties do not appear to offer this option, but I hope that maybe there's somewhere that I haven't looked.

  Hi klhdv

  Types of legend fall into a few different categories.

  * Standard text captions
  * Your comments legends
  * Rollover captions

  While you should be able to change all of a type of category to a different type in the same category, you can not change them in several categories. For example, if you use blue Adobe for a Standard text caption and you want ALL your Standard text captions to be blue Adobe, you can use the "Apply to all" feature you see on the legend dialog box to accomplish it. But if you also want to change the captions of all the "success" to be blue, Adobe, you would have to change among the legends of success, make the change, and then use them apply to all features.

  Yes, I know them apply to all features has a field where it says "any type of legend", but in my experience, this does not work most of the time for this.

  Here is the difference between a legend of suspicion and a caption simple flipping. A legend of suspicion is associated with a button object, click box or text entry area. It appears by positioning the mouse on these objects to provide a 'hint' that something can be done. With a standard typical bearing legend, you simply set an area where you want the user to hover over and Show legend by positioning the mouse over the area. The big difference here is that the ancient artifacts, they are interactive. Normally, the user must do something with them. Click or type the text. And with the latter, they simply have the mouse on and read.

  A bit more about changing the type of legend. There is no installation that I am aware of that you can use inside Captivate maybe right click on a legend of feedback and to choose to convert it to a standard legend text or a caption reversal.

  I hope this has been helpful for you... Rick

• possible to change the font size of the bookmark toolsbar?

  possible to change the font size of the bookmark toolsbar?
  upgrade to firefox v22 and notice this bookmark toolsbar got bigger, some bookmark font cannot be displayed, it is normal? possible to change?

  Hello

  Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution.
  You can adjust the resolution of your screen.
  To change it follow these steps:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.

• Is it possible to change the sort order of the Windows Explorer?

  When you use windows Explorer to search for files I find things I named by date are sorted incorrectly.
  Here is an example of how that fate (sorted by name, having consulted the details page): names of files in the following order

  Tidbits200710001b
  Tidbits200710001a
  Tidbits20100207a
  Tidbits20100201a
  tidbits20080300s
  tidbits20080300r

  I would like to than years (at least) to be in order.  Is it possible to change the sort order in windows Explorer?

  http://support.microsoft.com/kb/319827 :

  1. Click Start, click run, type regedit, and then click OK.
  2. Use one of the following methods, depending on your situation:
     • To configure the policy for all users of the computer, locate and then click the following registry key:
       HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer
     • To configure the policy for the current user, locate and then click the following registry key:
       HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\Currentversion\Policies\Explorer
  3. On the Edit menu, point to newand then click DWORD value
  4. Type NoStrCmpLogical, and press ENTER.
  5. On the Edit menu, click modify.
  6. To set the order of sort that you want to use for files and folders whose names contain numerals, use one of the following methods, depending on your situation:
     • To configure Windows XP or Windows Server 2003 to use the method used by Windows 2000 for sorting files and folders, in the value data box, type 1, and then click OK.
     • To configure the default Windows XP or Windows Server 2003 method for sorting files and folders, in the value data box, type 0, and then click OK.

       Note When the NoStrCmpLogical value does not exist or it is set to 0 (zero), the Windows XP default sort order is used.

  7. Exit the registry editor and restart the computer.

  You want the first option 6.

  Noel

• OfficeJet pro 8600: not possible to change the scanning of the Panel of the printer resolution settings

  With my Officejet pro 8600, there is no possibility to change the scanning resolution settings when you are working in the control panel of the printer (not present button to touch) when I want to scan to the computer, while in the manual it is mentioned that, after pressing the Document Type, it should be possible to reach the resolution to change the resolution of the scan setting. On the other hand, when the scan to a memory card the button change the resolution settings is present.

  Sometimes for the scanning of all computers to select (winXP SP3 installed on it). The HP printing software is installed on all computers and manage digitization to the computer is turned on. It is possible to change the resolution settings when using my computer with the HP printing software, but as I said not in the use of the printer.

  Thank you to help you solve the problem!

  Hey mk75053,

  Scanning to memory card has the parameters of resolution through the front because that is the only way for the device perform this type of analysis.  However, to change the resolution settings for the Scan of the computer, one will have to perform scans through the software installed on the PC.

  I have all three types of 8600 models where I am located (base, more high quality) and of all printers simply ask to start the analysis after selecting the scan type.

  I hope this helps.

• Manager disc Snap-in for the MMC. Is it possible to change the order of columns. Or remove columns completely?

  Manager disc Snap-in for the MMC. Is it possible to change the order of columns.  Or remove columns completely?

  I would like to move the capacity;  Space free; Status; to be fair, Volume.  The page layout;  Type; File system; seems to me

  useless in this form.  If there is no way to change maybe someone at Microsoft may include this option in Windows 9.

  Hello

  I would like to inform that you can not change the order of columns or remove columns completely as it is by design. However, you can display or hide items in the console window.

  Hide columns in Diskmanagement:

  a. Click Start, type diskmgmt.msc and press to enter.

  b. click view and select Customize.

  c. you can select or clear the check boxes to show or hide items in the console window.

  I hope that helps!

• It is possible to change the front in a textbox

  For Acrobat Reader.

  It is possible to change the front in a textbox control. I think that to change the color, size, and type. It seems that it is only possible to change the properties of the image/box. How can solve this problem - I think it was possible in older versions.

  I am looking forward to hear from you.

  Best

  Thomas

  Select the text and press ctrl-e.

• To change the type of search to a string field in the DataObject Layout

  Hi all

  I am trying to change a simple string search field type, but at the same time, I don't want to lose the contents of the field. Is it possible to BAM?

  Thank you

  Jayanthi

  Hi Anne,.

  When we have data in place, that we cannot change data - type.you can do you something like make a backup of the data using Icommand object.

  and change the type of xml data exported in importing data Object.and the same.

  It's like ricks, if the purpose of these data are interrelated with other data object or if you created reports on the same.

  try something like that when you finished taking backup of all things

  Concerning

  Shankar

• Is it possible to change the settings in "help > system information?

  Is it possible to change the settings of Photoshop by clicking Help, and then click system information? Since there is the possibility of type and the OK button, I just started wondering.

  Any help > System Info done is to your specifications so that you can copy and paste into the forums for troubleshooting purposes.

  You can choose what to highlight and copy, but it changes nothing in your system as editing a configuration file.

• is it possible to change the color of the marker after the fact as a prelude?

  I love prelude as a program for recording of my images. I have a number of markers that have different colors, but I would like to know if it is possible to change the color of the marker after it's done. I know that this can easily be done in first, but why not as a prelude?

  First, you can easily change color even way of a marker after after the marker was done...

  

  .. then why you can't edit a comment marker color as a prelude?

  
  

  Conversely, why first does not respect the colours of marker in the prelude, and has rather by default them all green? This should be addressed in the next update.

  Otherwise, there is no reason to be multicolored markers in prelude if all change the default is green once they appear in the first.
  

  Hi Ninosel,

  Thanks for pointing it. Currently, it is not possible to change the colors of the markers, after that they were recorded, in the prelude to the way in which it can be made into Pre Pro.

  Well, the colors are editable, even after cutting, but the colors of the markers would change. Consider the following scenarios:

  1. add some markers; Comments and subitems on any multimedia file. Go to editing Preferences-->--> marker. Select the marker type and the corresponding color. Ok

  Back to the scenario where you connected to certain markers. The colors of all the same type of markers would be changed.

  However, you can have different colors for different markers of the same type.

  2. I hope you tried the models tag of prelude--> window--> tag. With tags, you can set tags of different colors. They work as comment markers.

  You can create tags of 100 francs of colors and save them in media files.

  Although you will not be able to change the color of the already signed tags/comments, but surely you can change the colors of the tags as well & easily as pre pro.

  Tags also give a wide range of colors, so maybe you won't feel like by changing the colors of the markers after cutting.

  

  I hope it helps. Do not respond in the case of any confusion.

  Thank you

  Mayjain

• Can we change the type of field dynamically in the Apex

  Hi all
  
  Using Apex 4.0;
  Is it possible to dynamically change the type of field from one to the other? I have a list of selection; If the user selects a particular value, I need to display the next filed a tabled text, and if a different value that he chose the need to view it as a selection list.
  
  Please guide me,
  
  Thank you

  If these two form elements are two different columns in your table, just use the regular treatment.
  Otherwise, you can either
  -Create a view on top of your table that contains two columns (thus duplicate), use the regular treatment of APEX and doing the real work to instead - relaxing on your view or
  -Choose elements to map to your table.column and (when the other field is shown and modified) copy the value to the first element with dynamic Action.