Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

Similar Questions

• Module Bluetooth for Satellite A80 129

  Hi all!

  Is it possible to upgrade my satellite A80-129 with a BT module or it is not possible at all?

  And if possible, what then is the right one for my laptop?

  BR, Kekec

  Hi kekec

  I found information that Bluetooth for A80 is not available. This means that there is no possibility of upgrade. In this case, the best advice is USB Bluetooth stick.

• Where can I find repair for Satellite A80 129?

  I want to find the service manual for the model satellite a80 129 because my screen is a little loosy.

  Hello

  In general, manual service Toshiba is not available for end users. Maybe you can find help on the net, but if you n t with experience, it will be best to contact a qualified staff in some laptop repair center.

• Problem of its satellite A80 129

  I bought the laptop Satellite A80-129 a few days ago. I decided to install Win XP Prof instead of Win XP Home, which came with the laptop. After installing all kinds of software, I noticed something weird. His knowledge was quite low.

  I checked all kinds of possible parameters of volume everywhere and it is set to max everywhere possible. Also, I checked the volume on the laptop dial and it is also turned to MAX I installed WM Player 10, RealPlayer, Quicktime and Winamp 5.08.

  After playing some of my music, I came across something interesting. While I was playing my music in Winamp, I also played a small video file in WM Player 10 and that's sound was really loud. Immediately I looked at which audio codec is used in this video and this is WMA 9 (64 kbit/s, 48 kHz stereo, (A / V) 1-pass CBR). When I stop the playback of this video, sound volume decreases again.

  I also tried sound in other software such as RealPlayer and Quicktime, and only after I read this audio video gets really strong in all players. Any suggestions?

  I would point out also that no matter if I play music (mp3, wav, audio CD..) or video (avi, mpeg, rm,...), audio is still low. Only after that I have play this specific video, the sound becomes strong to all players, playing music or video.

  I also have problems with energy saver. If I install it, everything I write in the world is so slow, it appears letter-by-letter although I already wrote the entire sentence. If I uninstall, then everything is back to normal. Why is this happening?

  I would really appreciate a response.

  Best regards, Kekec

  Hi Kekec

  It's very strange because that all tools & utilities should work fine using Windows XP Home and Professional. Have you had all of these problems at the beginning with OS preinstalled by Toshiba? The original operating system provided by Toshiba included SP2. Have you installed it too?

• Satellite A80 129 No. wirless and Bluetooth internet

  Hi guys,.

  I have a laptop Toshiba I formatted yesterday is Satellite A80-129.
  After some googling I found the way to get the drivers for it, but those driver links two do not seem to work.

  Bluetooth stack
  Toshiba OS independent NA World Wide
  http://Support1.toshiba-tro.de/Tedd-files2/0/bltstk-20070724121132.html
  Wireless Lan driver
  Intel Windows XP s/o world wide
  http://Support1.toshiba-tro.de/Tedd-files2/0/wlesslan-20070716135646.html

  Please help me get my WiFi and bluetooth
  I really need to use it.

  THX

  Hello

  The laptop does NOT have Bluetooth!
  That's why you can not install the BT stack!

  Regarding the WiFi network:
  I'm not quite sure what you have but here the map Intel WLan is a beautiful m document how to find the right driver:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

• Satellite A80 129 DVD-RAM write speed problem

  Hi all!

  I have a problem. the thing is that I want to write in NERO 6 (last version purchased) a CD or DVD, but we will only write to me at slow speeds. In this laptop I MAST * a DVD-RAM UJ-830 s with DVD-R 8 x and 24 x CD - R write speed said.

  When I try to write on a CD it gives me only 16 x write speed, then where is x 24? It goes same for DVD, as I want to burn DVDs and it gives me only 2 x write speed.

  Please, do not put this fault on a CD or DVD, cause in my country there are limited suppliers of this type of media, so I won't change my media. They worked with my previous PC CD - RW fine, no speed problem.

  I want to know also if this is lack of DVD - RAM, where then find firmware for this burner?

  Thanks for your replies.

  BR, Kekec

  You should try to update nero, it might solve the problem.

  Also an update of the firmware can help, go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

• Satellite M30X and Mat * a dvd - ram uj-8205 burning problems

  I have Satellite M30x and Mat * one year dvd - ram uj-8205. On the beginning everythinks worked very well, but in the last months of 2-3 that it cannot reads some CD and have problems with CD burning
  I restarted the laptop with the recovery cd, but still the same problems. Before robooting, I used nero 6, thougth perhaps, this is the problem in nero, now using just Sonic record now accompanies the DVD.

  Please anybode help me?

  Hello

  How to help you if you don't mention what CD cannot be burned (original music CD, homes burned CDs, just specific producers, only some files are not readable). Give us more info on this issue.

  Check a little better, and if there is no success is perhaps the defective drive. It is well known that some CD (a cheaper) cannot be burned properly.

• Satellite A80-131: what CD/DVD player is compatible

  Hello

  I need to buy a new DVD - ROM drive because my old is bad!
  I have a toshiba Satellite A80-131 with mati dvd - rom * a UJ - 831S.
  I would buy another drive: toshiba, samsung, pioneer the suport of mati because * a (panasonic) is not very good. But what model is compatible with the old drive UJ - 831S?
  Support does not provide this information to me.

  I have a toshiba HD MK4025-GAS and I want to do an upgrade, but the
  model PA3406U - 1 HA 0 (100 GB 5400 MHz) is very expensive.
  Model MK is cheap.
  But that model MK I buy with 100 or 120 GB?

  HI Ronai,

  Any optical drive slim form factor fits physically to your laptop, but you'll hjave to make sure that you get with the correct connectivity. It will be either master or slave (and sometimes C/salt). This setting is normally carried out by the manufactrer reader and it is not easy to change later unlike the larger disks used in PC where you can return some small switches to change the setting.

  To be sure, you can ask your local authorized Toshiba Service partner which models are fully compatible.

  In regards to your hard drive, you can choose any hard drive manufacturer (the MK designation indicates a Toshiba drive) but I don't know if 100 GB is greater that the BIOS will allow you. I know that 80 GB working fine (I use a Fujitsu 80 GB HDD in my SA30) but I've never tried a higher capacity drive.

  You may also like to consider a faster rotation speed. GAS from Toshiba records with the suffix are usually 4200 RPM, while those with a GAX suffix are quicker to 5400 RPM. MK8025-GAX is a good option.

  Kind regards

  Post edited by: NickyNoogle

• Satellite A80-115: reader of DVD Multi not closing

  Hi all

  My Satellite A80-115 multi DVD player has problems of closure; I sometimes try up to 10 times before locking the drive in place.
  Everyone knows about similar problems?

  Thank you

  Tom

  Hi Tom,

  As you will understand, the CD tray use a mechanical lock to hold it firm when you use. The latch is locked to prevent opening while the disc actually rotates the drawer.

  If you have problems closing the drawer, then it will probably indicate wear or damage the physical locking mechanism. Access to the lock will be the degree of disassembly and it will be very difficult to opbtain the components of the lock, so I think that the best option would be to replace the disk.

  If your device is still covered by a warranty it should be done by authorized service center.

  If your warranty has expired, then you can consider replacing the drive yourself. Several suppliers are located on the internet.

  HTH

• Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

  Hello.

  I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

  The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

  The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

  I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

  Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

  What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

  was soon Dan

  Hello

  Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  and restart the laptop

  See also this article from the Toshiba FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  and the Microsoft Knowledge base
  http://support.Microsoft.com/kb/314060/en-us

  Good bye

• Satellite A80 129 usb mouse problem

  I have MS USB Intellimouse Optical. And if I connect the mouse to the first USB port (under the laptop computer right speaker), the mouse installs and then with the mouse disconnected constantly. As he works for a few seconds then disconnects and reconnects again, constantly. If I connect it to the other three USB ports, all is well. I don't want to use the other three ports for the connection of the mouse, but I want to use the primary, cause of handling convience (DVD-ram opening and limited space on my table). Also I installed the drivers for the Microsoft mouse, but the mouse plays the same.

  So is this hardware or software problem?

  I have WinXP Pro SP2 installed.

  Best regards, Kekec.

  Hi kekec

  Is there a possibility to check this port with another external device? It will be interesting to know if there is problem using some another unit.

  Anyway, in my opinion, it may be just the hardware problem.

• Satellite M-40, Mat * a DVD UJ - 831S does not read blank DVD

  It does not read empty, brand new DVD discs: Sony, TDK, etc., showing "a drive not accessible" and with a memory full 0 kB! but it reads DVD movies

  Hello

  Have you installed the Roxio Easy CD Creator software on your laptop?
  This problem may occur the Roxio CD recording program Easy CD Creator is installed on the computer, and if the version of the CD recording program is not compatible with Windows XP.

  Please check this page from Microsoft:
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 315350

• Satellite M55-S325 DVD write error (MAT * a DVD - RAM UJ-years 840)

  Hi all
  I have a Satellite M55-S325 with MAT * A DVD - RAM UJ-years 840 Firmware Version 1.52 I bought States 5 months ago, everything seemed fine until a few weeks ago when I tried to write some data DVD, I had unrecoverable errors while writing the DVD using NERO 7 ULTRA EDITION, but now I get this messege all the time and I'm not able to write any DVD the disc seems to be well in CD writing. I tried to use recording SOUND now that comes with the laptop, no luck. I tried to reduce the size of the files, and try with lower write speeds but still no luck. I disabled burning CD of the Windows XP SP2 IMAPI burning service COM as well. I use a good quality DVD-R that worked fine before. I would appreciate your help because my HDD is almost full (but still 10 GB of free space) and I need to get a backup of my data.
  Here is the log of my last attempt in writing, file a NERO DVD:

  1C82-0010-8011-0000-1454-2737-5268

  Windows XP 5.1
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 164112 bytes, created 02/11/2004 13:54:32

  NT-SPTI used
  Nero Version: 7.0.1.2
  Internal Version: 7, 0, 1, 2

  Recorder: Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: default (0)-> ATAPI, detected:?
  CD-ROM: Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: TOSHIBA MK1032GAX atapi Port 0 ID 0 DMA: on
  CdRomPeripheral: MAST * A DVD - RAM UJ-years 840 atapi Port 1 ID 0 DMA: on

  = CDRom-Device-map =.
  CARPET * a DVD - RAM UJ-years 840 D: CDRom0
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 73400320 (0) bytes
  ShowDrvBufStat: 1
  BUFE: 0
  Physical memory: 502 MB (514480 KB)
  Free physical memory: 160MO (164772kB)
  Memory in use: 67%
  QUERIES PFiles: 0x0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  14.5.2006
  Compilation ISO
  15:18:55 #1 text 0 file Isodoc.cpp, line 6411
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: REAL
  Multisession: FALSE
  Burning mode: DAO
  Mode : 1
  : ISO 2 (31 characters)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  15:18:55 #2 Text 0 File ThreadedTransfer.cpp, Line 525
  ReadBuffer-Pipe got 262144KB of memory

  15:18:55 #3 text 0 file Reader.cpp, line 124
  Player running

  15:18:55 #4 text 0 file Writer.cpp, line 113
  Writer D: MAST * A DVD - RAM UJ-race years 840

  15:18:55 ISO9660GEN #5-11 file Geniso.cpp, line 3312
  First address writeable = 0 (0x00000000)

  15:18:56 #6 text 0 file Burncd.cpp, line 3302
  Turn on Disc-At-Once, using DVD media

  15:18:56 #7 Text 0 File DlgWaitCD.cpp, line 279
  Last possible write address on media: 2295103 (510:01.28, 4482 MB)
  Last address to be written: 2288159 (508:28.59, 4469 MB)

  15:18:56 #8 Text 0 File DlgWaitCD.cpp, line 291
  Write in overburning mode: No. (enabled: CD)

  15:18:56 #9 Text 0 File DlgWaitCD.cpp, line 2578
  Recorder: MAT * a DVD - RAM UJ-years 840, media type: DVD + R
  Disc manufacturer ID: MBIPG101, media Type of ID: R04, product revision number: 1
  Disc Application code: 0, extended information indicators: 3

  15:18:56 #10 Text 0 File DlgWaitCD.cpp, line 458
  > Protocol of DlgWaitCD activities:
  =========================================

  15:18:56 #11 text 0 file ThreadedTransferInterface.cpp, line 847
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 2288160 (2288160) original disc POS = #2288160 / 508:28.60
  relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288160 blocks [D: MAST * a DVD - RAM UJ-years 840]
  --------------------------------------------------------------

  15:18:56 #12 text 0 file ThreadedTransferInterface.cpp, line 1059
  Prepare recorder [D: MAST * a DVD - RAM UJ-years 840] for write in CUE-sheet-DAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Session closed, fixed disk
  Tracks 1 to 1:
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 0 4686151680, ISRC ""
  Introduction DAO:
  ===========
  __Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | _RecDep___ _
  0 | Lead-in | 0 | 0x41. 0x00
  0 | 1. 0 | 0x41. 0x00
  0 | 1. 1. 0x41. 0x00
  2288160 | Lead-out | 1. 0x41. 0x00

  15:18:56 #13 text 0 file SCSIPassThrough.cpp, line 36
  SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

  15:18:56 #14 phase 24 file dlgbrnst.cpp, line 1725
  Caching of files started

  15:18:56 #15 text 0 file Burncd.cpp, line 4132
  Cache writing successful.

  15:18:56 #16 phase 25 file dlgbrnst.cpp, line 1725
  Caching of files completed

  15:18:56 #17 phase 36 file dlgbrnst.cpp, line 1725
  Burn process started at 8 x (11 080 KB/s)

  15:18:56 #18 text 0 file ThreadedTransferInterface.cpp, line 2685
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  15:18:56 #19 text 0 file Cdrdrv.cpp, line 8411
  -A DVD structure: physical Format information (00 h).
  Layer: 0, address: 0 (0 h), AGID: 0; Length: 2050
  Book type: DVD + R (10), part Version: 1.0 x (1)
  Disc size: 120 mm, maximum speed: (h F)
  Number of layers: 1, track path: path of the parallel runway (PTP), layer Type: recordable
  Linear mass: 0,267 um/bit, track density: 0.74 um/track
  Starting the number of physical sector of data area: 30000 h (DVD-ROM, DVD-R /-RW, DVD + R / + RW)
  End number of physical sector of data area: 26053F h
  End sector number in layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
  There is no data in Burst cutting area (BCA)
  Disc Application code: 0 / 0 h
  Scope of Information indicators: 3 h
  Disc manufacturer ID: MBIPG101
  Media type ID: R04
  Product revision number: 1
  Number of bytes to use physical format information in ADIP up to byte 63:56
  Particular media [16.63]:
  00 00 03 4 42 49 50 47 - 31 30 31 52 30 34 01 38... MBIPG101R04.8
  23 54 37 12 02 42 6 02 - A8 6 B 15 15 0 B 0 B 08 08 #T7. BN... k...
  01-19-1 B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00...

  15:18:56 #20 text 0 file DVDPlusRW.cpp, line 666
  Begin to write his address to the LBA 0
  Mode high compatibility DVD: Yes

  15:20:47 #21 SPTI-1128 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1128)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Printing Code: 0x11
  Meaning of Qual: 0x00
  The CDB data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
  Sense area: 0xF1 00 03 00 00 00 00 0 a 00 00 00 00 11
  Buffer x05e50000: Len x 10000
  0 X 40 86 AB A0 6 B 93 01 4F 75 2 A 54 25 B7 F6 D3 E5
  0XA9 FC 97 DF 55 73 64 2 AA AF 96 7 D B8 4 C 7 C 66
  0XC1 9TH C1 FF FF 55 59 DB 08 65 CB 6 CA B9 0C HAS 2 B

  15:20:47 am #22 RDC-1128 file Writer.cpp, line 302
  Unrecoverable read error
  D: MAST * A DVD - RAM UJ-YEARS 840

  15:20:47 #23 text 0 file ThreadedTransfer.cpp, line 228
  all writers idle, stopping conversion

  15:20:54 #24 text 0 file ThreadedTransfer.cpp, line 222
  conversion idle, stopping reader

  15:20:57 #25 SPTI-1106 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  The CDB data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
  Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 03

  15:20:57 #26 SPTI-1106 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  The CDB data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 03

  15:20:57 #27 phase 127 file dlgbrnst.cpp, line 1725
  Generating borders high compatibility DVD

  15:20:57 #28 phase 129 file dlgbrnst.cpp, line 1725
  Production DVD borders completed successfully

  15:20:57 #29 phase 38 file dlgbrnst.cpp, line 1725
  Burn process failed at 8 x (11 080 KB/s)

  Existing drivers:
  File ' Drivers\CDRALW2K. SYS: Ver = 6.2.0.132, size = 24698 bytes, created 23/10/2003 04:15:02
  File ' Drivers\PXHELP20. SYS: Ver = 2.03.28a, size = 20640 bytes, created 05/31/2005 23:36:01 (Prassi/Veritas driver for win 2 K)

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

  Hello

  I can't find any strange or mysterious messages in the log file.
  You suggested that the drive can burn CDs but not DVDs.
  The calibration lens dysfunction is sometimes responsible for these issues.
  Unfortunately, I have no solution for this problem. The replacement drive must resolve.
  The unit is fairly new in this case, you should ask for help ASP.

• Satellite M30X-134. A device that can replace the "Mat * a DVD - RAM UJ - 820 s'?

  Hello world.

  My laptop is still big, and I don't want to get a new one.
  The DVD combo 'Mat * a DVD - RAM UJ-820 s' is now defective! The nearest Toshiba Servicecenter said that there will be EIGHT HUNDRED DOLLARS and gave no other details or suggestions, but if I find cheaper that they will install it.

  Now Ive has been unable to find the UJ-820 's' but some stores online request for similar models (UJ-846 and UJ - 850 among others) replace it without complications and are like 10 times cheaper.
  If anyone knows exactly what we can replace the UJ-820 s (same characteristics)
  Please let me now, it will be highly appreciated.

  PS. I have the UJ-820 's' think theres also UJ-820 and UJ - 820D I do not know the difference, the manufacturer (panasonic) does anyway.
  My dear laptop is: Toshiba Satellite M30X-134 (PSA72E - 015022GR) (in German)

  Thanks in advance.
  Erika

  Hello

  You can use almost all mast * one car because readers have some major differences. Maybe we can do DVD-R and another can do more media, but if you just need a reader to write cd/dvd then you can catch a UJ-846 or something similar from the connectors and electronics are almost the same.

  Moreover, I know many after-sales Service of toshiba but $ 800? Please can you post which was the service centre. Thank you.

  Greetings and good weekend

• DVD writing error Mat * a DVD - RAM UJ-850 s on Satellite L30-113

  I have Toshiba Satellite L30-113 psl33 with Mat * a DVD - RAM UJ - 850 s. operating system is Windows XP SP2.

  This drive read and write CDs, play DVDs, but don't write DVD the last time.
  After inserting DVD the status of the device in 'My computer' change to 'DVD RAM' on 'CD RAM.
  After the attempt to write, the errors are "Gage power error" and "not full disk at a time.

  Writing at the beginning of the DVD is OK.

  In your opinion, is it soft or hard error?
  Must I update DVD-driver or the replacement of the DVD player?

  Hello

  > I need I update DVD-driver or the replacement of the DVD player?
  Usually the ODD driver is part of the Windows operating system.
  Windows uses the internal Microsoft driver that controls the ODD.

  In any case, the European driver Toshiba page contains a DVD - RAM driver. This driver gives you more support for your DVD RAM drive.
  I m not very good if it will help you, but try to reinstall and check if the drive will be CD - RAM DVD-RAM

  See you soon