Is it possible to completely disable the backup Rescue and Recovery?

Similar Questions

• It is possible to completely disable the Junk filtered by IMAP in WLM?

  WLM is too active and is entering of incoming emails quite normal and throw them into the junk e-mail folder.  Whether accounts Gmail or random areas, it is a problem because I am trying to use WLM to manage my work email addresses.  Is there anyway to turn off completely this too active 'functionality '?  I connect to my domain via IMAP address.

  It's really become a nusense since I have to pay attention to my Junk folder to see if important emails are to be mislabeled.  And no, whitelist these addresses is not an option because it allows only existing communication.

  I turned to Phishing, and I set the junk filter to "No filtering"... to the zero effect.  Is that what I can do or should I scrap WLM?

  Hi Toasty_S,
   
  I recommend you post your query in Windows Live Messenger Forums for assistance with this issue.

• Delete backup files Rescue and Recovery after the uninstallation of r ' not R

  During the upgrade to Windows 10, Rescue and Recovery has been automatically uninstalled.  I had neglected to remove the external drive backup files before that.  I would like to locate these files so I can delete them manually.  What files are backups Rescue and Recovery?

  Y at - it a compatible version of Windows 10 Rescue and Recovery?

  I leave your external USB - HDD intact right now.

  You might like to win 10, win10 could not meet your needs and turn.

  A Loved via RNR win7 would be nice to have, just in case.

  If it comes to the test computer, your decision.

• Is it possible to completely disable tabs (remove all tab options menu) for firefox 10?

  Is it possible to completely disable tabs (remove all tab options menu) for firefox 10. I hate the tabs and the recent changes made to the incorrect selection of menus are "open in a new tab" when what I want is "open in a new window" a common and unwelcome occurrence.

  You can hide menu items and move up / down in the menu with the Menu Editor extension.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/710

• Is it possible to completely disable port 23 on a Cisco device?

  When we run the command 'show the ports-open-plan control host' on any of our routers (but more precisely a CGR 2010) we are witnessing port 23 in a listening state.

  Active internet connections (servers and established)
  State of Service Local prot address foreign address
  tcp                        *:22                         *:0                                    SSH-Server LISTENING
  tcp                        *:23                         *:0                                              Telnet LISTEN
  udp                       *:123                       *:0                                                LISTEN TO NTP

  Our listeners are wary of even if we have shown that we do not have telnet activated on VTY lines only SSH, and there is an ACL in place for extra protection. Is it possible to completely disable port 23 to prevent it from running at ALL on startup? I have scoured the internet for a solution to this and have developed dry. I think there must be a way to do this, but he can't know. Is it possible to do it at all? And if not I would really like to find official documentation from Cisco, indicating that ports are by default and cannot be disabled so that I have something to give our listeners.

  Thank you!

  You cannot stop the telnet service completely on a router IOS, including the CGR 2010. This can be done on NX - OS ('no telnet service').

  As Leo points out and as you mentioned that you are already doing, secure the vty lines is considered a good practice. You could also add font control plan. I saw that configuration to NERC audits used in nuclear power plants here in the United States.

  As far as something if official Cisco, you open a TAC case or work with your dealer to get something of the business unit.

• How do I completely disable the library?

  Hey there, is it possible to completely disable this library? I don't want it. for example every time that I create a color in illustrator, there is a library created with this color. I don't need this. and I can't find a checkbox in the preferences for this cut for all cloud applications.

  any advice?

  see you soon,

  Christian

  There is a checkbox when you create color swatch: "add to my library".

  Just turn it off.

• How do I completely disable the hibernation on the Satellite Pro A300

  Hello! I know the questions with Satellite Pros do not wake up from hibernation, and I read the answers, which recommend an update of the BIOS and OS.

  My BIOS is the latest version, but the OS is XP and should stay that way - I bought the laptop, which could to downgrade (for business reasons).

  Since my computer laptop does not wake up from hibernation, I thought I would disable hibernation completely I don't need (I use the PC at home 99% of the time). I disabled hibernates from the Power Options in the control panel and also in the Toshiba Utilities, and the service is confirmed to be disabled in the BIOS when I check using F2 at startup.

  My problem is that the PC will still hibernate after an hour or two of being in standby mode, and then it won't wake up unless I reboot. Let me explain better: I'm home, I stop to work for lunch and before going to lunch, I put the PC to sleep. If I come back an hour later, he went into hibernation in its own right, despite the hibernation is disabled.

  So my question is: given that the software/BIOS Hibernate disabling does not what it says on the Tin, y at - it a HARDWARE setting that disables the Hibernate once and for all? Something like a rider to be moved or modified, or similar?

  Thanks in advance for any help.

  Hello

  Have you checked the Vista power options if hibernation is disabled?

  You can find it in the control panel-> Power Options

  There is a link to the advanced settings. Select this check box.
  There should be the option to enable / disable the hibernation

  Good bye

• How do I completely disable the vibration?

  Whenever I get a message, the phone vibrates, cannot find an option to completely disable the vibration.

  You have to go in some applications individually. E-mail and SMS applications have their own notifications parameters including vibrate.

• How to disable the backup works when you print an email?

  How to disable the backup works when you print an email.  Whenever I try to print an e-mail, save it as a PDF is displayed.  I then have to save, then open the file to print.

  Hello

  Thanks for posting your query on the Microsoft Community.

  To disable this feature, you need to uninstall Adobe reader and then check if still back you the question quickly.

  Kind regards

  Jesinta Rozario

• I want to completely disable the Windows Magnifier. How do I do that?

  I want to completely disable the Windows Magnifier. How do I do that?

  See this thread.
  http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/409861dd-c0c5-4D64-AAEC-fb42f23647b7 Bruce Hagen MS - MVP [Mail]

• Rescue and recovery of backup fails: current drive does not match the previous backup

  I have just rebuild my T60p with a new hard drive for the recovery of Lenovo CD via the rescue and recovery CD. Once the system restore is complete and the laptop running, I took a full backup using Rescue and Recovery. This backup is the C:\ drive which was the only drive I had and was on a USB hard drive.

  In recent days I have the C:\ split in two, giving me a new D: drive, patched all system software, added my own data, and obtained the machine configuration as I want. I've also trashed the R & R hidden partition so I could make a bigger drive D:\ and created my own bootable CD R & R for future use - not that it makes a difference.

  Now, I want to take a second backup with the Rescue and Recovery tool. Naturally I want to back up the disks C:\ and D:\, but the backup fails saying: -.

  "The last backup of this system include the following drive letters: C: .

  Your system is now back up these drive letters: C: d:

  Please define drive letters, as they were before and Christine backup. You may need to exclude partitions created since the last backup. »

  Is there anyway that I can make a backup of disks C:\ so my D:\?

  The only option I see is to delete my previuos backup and I don't want to do because it can be useful in the future if I still want to restore my system to original state manufactured.

  Suggestions anyone?

  Thanks, Iain

  Given that you have saved on an external USB disk your backup will be saved in a

  the folder named RRbackups.  If you rename this file I - think - R & R going to think

  you do not have any backups, so the next backup will be a 'base '. If you

  never have to restore the original of your 'base' backup, rename the folders should allow.

• With the help of Rescue and Recovery to make backups of 3 different machines

  Hello, I have three laptop Thinkpad T400, X 61 and R61i. I want to back up by using an external hard drive. The HD is divided into three partitions, the smallest of X 61, the middle of R61i and most importantly - for T400. I backed up all my laptops in the appropriate partitions (base backups), but now, so I want to make partial backups, they go to the bigger partition (for the T400). Is it possible (and how) do R & R to always use the same partition for each laptop while safeguarding it?

  A few notes, to respond to your previous post:

  (1) Sysprep is used by administrators to deploy and image system to other machines. Basically, the system starts standalone RNR and save the image (drive C and the same HARD drive partitions) on the service partition.  Comment enumeration pleasure has to with additional partitions on the C drive HDD.  For sysprep to work, additional partitions must be of type Extended. The windows PE, is a windows "skimpy" PRE environment. For win7, the EP is based on Vista with a small set of win7 features added.  Thie PE is used for developers (as Lenovo) to install their systems.

  * None of this applies to a user at home like you and me *.

  (2) the logic used in the RNR for the GUI vs bent the advanced GUI are DIFFERENT.

  Example: the user has part C, D and E on C disk HARD drive.  Uses advanced parms to set backup (local) to go to E drive.

  If the backup through the advanced graphical interface, drive E is honored.

  If the backup is performed through simple GUI, the partition with the largest free space is used.

  Note: using the Second HARD drive don't offer NO choice to designate a partition target of \RRbackups.

  (3) view of backups.  It's clearly too.

  When a backup is performed, and RNR is locked on him, it will REFRESH the registry entries for the content of backup.dats in the \rrbackups folder. Subsequent backups of view will probably be read from the registry. That is to say no record of reloading. Simpified mistletoe might once again, just to use the registry, the locks of GUI in the new backup folder.

  (4) your letter removal/restoration

  a: I have no idea how autonomous RNR will react to the 3 folders on the second \rrbackup, IE the part 1, 2, 3.

  b. If rnr backups locked in the wrong \rrbackup folder, you will have a total mess. A symptom of this: you take a basic (full) backup, and the next backup, which should be an incremental, is actually another full backup.  This error could occur if you deleted the wrong letters.

  (5) you have a mess.

  If I save it again this PC, R & R is a point instead of a differential backup<>

  It would take a lot of work on you end to look in the backup files.  Not worth it.

  Again, the simpifed GUI backup use different logic. He likes the larger partition.

  From what you say, you used simplified and got the base of the machine backup 3 all go good part 1, 2, 3.

  Somewhere in this mess, he locked in a \rrbackups without a base backup folder and took another backup.

  who knows.

  ==

  Release notes:

  Review 4
  ----------------
  Location of backup changes when you select a smaller partition through the advanced interface of the Rescue and Recovery program.

  In the advanced interface of the Rescue and Recovery program, you select a partition more small capacity on your local hard drive as the backup location. Then, you switch to the simplified interface to create the backup. However, the backup is created on the partition with the highest capacity.

  To resolve this problem, back up your system in the advanced interface of the Rescue and Recovery program after you have selected the backup location.

  ===

  The solution is the cleanest way to follow. I would always use the GUI advanced for now on.

• I use Firefox for a kiosk application. Can I disable the context menu and zoom?

  I use Firefox for an application kiosk on a touch screen monitor. I will prevent users from interacting with the browser interface. Is there a way to do this? Disable the context menu and zoom for the touch gestures could prevent users from getting into a State where they are unable to use the application.

  Hi TrevorTubbs, you can disable the zoom in the browser with the method described in http://kb.mozillazine.org/Locking_preferences & locking these preferences:

  lockPref("toolkit.zoomManager.zoomValues"; "1");
  lockPref("zoom.maxPercent"; 100);
  lockPref("zoom.minPercent"; 100);
  

  I'm not sure if disabling the context menu...

• Missing from the 40 GB hard drive! (R61) - Rescue and Recovery said there is no backups?

  I have a laptop R61 140 GB running on Windows Vista. It is around the age of 18 months.

  Explorer Windows says that 82 140 GB GB is used.

  When I add each folder I get only 45 GB of used space. All I really on this computer is music 26gig & some vacation photos.

  I had this problem since I first got the computer.

  I looked through discussions here that suggested that the backups can be the cause, and a program called Rescue and Recovery was the problem.

  However, when I opened this program it says that there are no backups available. However, this program is no doubt trying to run on my computer every Wednesday I get a popup saying my computer was turned off and I want to run it (I say no).

  Tools SW file is 2 GB.

  On the windows Explorer when I right-click I see there is something called 'points system recovery', there are many. However, I can't understand it here, where the data is stored, or how I would delete it.

  Please help me because it's very frustrating because I have about 40 GB of music I would like to pass through but right now that uses a lot of my remaining space.

  Download this and you can see everything on your hard drive http://www.pcworld.com/downloads/file/fid, 64425-page, 1-c, downloads/description.html

• I disabled the automatic updates and it starts to turn itself on, W H Y?

  "WINDOWS XP HOME SP2 '!

  I have disabled the automatic update and it starts itself to spin, WHY?

  HOW DO I KILL IT?

  I want all the crud that microsoft that will come to me.

  Hi Gail,

   

  You run the computer as an administrator?

  Method 1: You can run the fixit available in the article below from the off-ramp of Windows Update and then check if it makes a difference

  How to configure and use automatic updates in Windows

  http://support.Microsoft.com/kb/306525

  Method 2: You can see the steps outlined in the article below

   

  How do I turn off the Windows Update feature in Windows XP

  http://support.Microsoft.com/kb/892894

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Note: It is not recommended to disable Windows Update, automatic update, you do not have to search for updates online or worry that critical fixes for Windows might be missing from your computer. Windows automatically checks for updates for your computer.