Is it possible to configure NFAS with MGCP or require a H323 gateway?
I'll put a bridge linking taken 5 put in place on the side of telco as NFAS.
I was wondering if there is any way to group these ECN with MGCP or if I do a H323 gateway.
No, ECN is not supported with MGCP. SIP or H323 is what you should use. Assuming a little recent CUCM and IOS SIP would be preferable.
Tags: Cisco Support
Similar Questions
-
two accounts different gmail and a yahoo. is it possible to configure Thunderbird with two or three eventually accounts so I can receive all emails in one place. Thank you!
In the menu bar, select file-new-old e-mail account
-
Hello community,
We have added new PRI to our single PRI. PRI is controlled by a CUCM via MGCP 7.1.5, we use money 3925 15.0 (1r) M16 for the gateway.
Now we're configuration SRST/mgcp relief... I wonder if I can assign the caught a group of circuits; It would cause problems with MGCP or when it passes in SRST mode?
Thanks in advance!
In SRST, the mgcp application is not active. The back fall isn't H323, has therefore no impact on your groups of circuits or mgcp
-
Hi all
I am looking to set up a virtual lab cluster Exchange 2003 and I said it is possible to configure a SAN storage type in VM Workstation without actually have a SAN (as my test budget is, finally, zero).
Anyone done this before? I have a decent size usb storage device...
The quorum disk must be on a drive shared (s), another VM server with shared drive would be good enough to make it work?
Hello
There are several ready to use of virtual machines that can be downloaded which can help you
an example is a virtual SAN Sun
http://www.Sun.com/storage/disk_systems/unified_storage/resources.jsp
or you can watch Openfiler or FreeNAS.
A completely different approach would be to use iSCSI - you may install for example Starwind on your host and then using the USB drive as an iSCSI SAN
___________________________________
-
How to configure automation with Apple TV, Homekit and Hue
I have what I believe should be a viable home automation installation: a new brand (4th generation, Sept. 16) Apple TV, a hub of hue with the support of Homekit and seven lights attached via the hub. The lights appear in the home iPad app and can be enabled or disabled here. I can also do things with Siri on the Apple TV as "turn one room family", and have the appropriate lights. Thus, it seems that everything works.
BUT: when I go to the tab "Automation" in the app iPad Home, all I get is a page telling me that I should get an Apple TV to put in place of the automated activities - there is no way to actually DO something. Am I missing something obvious? I do this also? Don't forget that I can control the lights in the House on the iPad, so they certainly know each other... Thank you!
Howdy Jim
Looks like you are unable to configure Automation with your Apple TV. I would check that you have everything set up correctly with the steps described in this article:
Automate and remotely to your accessories HomeKit
If everything looks OK, then use the section 'Get help with your home hub' down. Thank you for using communities of Apple Support.
-
Hello
Is it possible to use headphones with XBOX 360 third-party wireless.I have my World of Warcraft, a caseThank youHello
Wireless headsets should work with the XBOX 360.
You can read the following article:
http://support.Xbox.com/en-us/Xbox-360/accessories/set-up-wireless-headset
http://www.Xbox.com/en-us/Xbox360/accessories/HeadsetsCommunication/Xbox360WirelessHeadset
-
Silverlight.Configuration.exe
When I click on before sending a message, I get a screen 'Silverlight.Configuration.exe' with an allow / do not allow permission. I am also warned that it is outside
My protection. Recently started to receive emails of some of my address book to stop sending advertisements. (which I did anyway)
What is happening and is involved with Silverlight, you have an idea?
Hello
. What mail client do you use?
. When was the last time it was working fine?
. What antivirus software you use in your system?
. Did you do recent changes with the hardware or the software before the show?
Method 1: A clean boot helps eliminate software conflicts. Visit the link to learn how to perform a clean boot: http://support.microsoft.com/kb/929135
Note: once the troubleshooting is complete, reset the computer to start as usual.
Method 2: Also uninstall and reinstall Silverlight and check if it helps:
http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx
-
Options has dissappeared since my top bar (the classic theme configuration) and with it, spell checker and al., search help find nothing useful, as usual. Am I the only one wondering how to access functions to be included under Options?
You have solved my problem, and I wanted to thank you again for your help and your patience.
-
How can configure auronomous with WPA2 pre-shared key access point
I worked with the 4400 WLC series and set up access points aironet 1140, and all work without any problems.but when I tried to configure the autonomous access point I couldn't configure the AP with WPA or WPA2 preshared key and I could configure it with WEP, I want to help here.
Wi - Fi Protected Access 2 (WPA 2) Configuration example
http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtmlPlease rate when useful or appropriate.
-
I have baught a new portable computer and you want to install windows vista (32-bit) on a bootable partition that it will be possible to do it with windows 7 (64-bit)
the laptop contained Home Basic windows 7 (64-bit) and I want to install windows vista Home premium (32 bit) on a bootable partition that it will be possible to do or tell me the parallel method to move a certain 32-bit operating system...I do not understand your question. If the laptop can run Windows Vista, it can probably run Windows 7 too.
To run Windows 7 64-bit, the processor must be a minimum Core 2 Duo.
System requirements:
* 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
* 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
* 16 GB of disk space available (32-bit) or 20 GB (64-bit)
* Peripheral figure DirectX 9 with WDDM 1.0 or higher driver
-
On the outlook calendar, I could change the "reminder" what time it is, is it possible to do this with the W8 calendar? Let's say, for example, I want a reminder of 40 minutes or 1 hour and 45 minutes. W8 calendar does not appear to have this as an option.
Hello
Here are some steps that you can follow:
a. open the calendar app.
b. right-click on the screen of the calendar app.
c. Select the new option (with sign +) from the lower right corner.
d. under How long option, select custom , and then select your choice.
Note: Also check the option to display more choices.
e. save the settings by clicking the Save option in the upper right.
See also:
Application of calendar for Windows: FAQ
http://Windows.Microsoft.com/en-us/Windows-8/calendar-FAQ
I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
-
Plans of work in PS CC can be also for print design? If not, is it possible to use photoshop with similar functionality?
As they don't understand the area of cropping and Bleedbox parameters so far that they are, in my opinion, useless in regards to printing.
If you try to make prepress and correct page layout work in Photoshop, you can change to use the right tools for the task as Indesign.
-
Is it possible to sign up with a certified signature (eID or certified token) in the webapp eSign-services to the Mobile app (s)?
Hi magaliew15892512,
Please contact our support team eSign via email [email protected] with your request so that we can enter details & help you better.
Kind regards
Nicos -
Is it possible to use Dreamweaver with WordPress (has the classes by Joseph Lowery) only uses a test server AWS and not an environment local localhost?
Yes, I want to talk and EC2 instance and I am able to do Dreamweaver to easily connect using SFTP which I believe is a SSH protocol. See the image below. This method works.
I currently have a test instance and will finally have an instance of production when the site is finished.
Local environment is not installed on my workstation and my thought was that put it on the server would allow transparent operation including scripts on the server side. The testing station is not public.
-
Multi-cam. Is it possible make a movie with eye camera quad?
Is it possible make a movie with eye camera quad?
In fact, I need all 4 cameras to appear at the same time on a single screen - in a standard video format.
Thank you very much.
I do all the way to "change the effect of movement for each video. Where and how do you do that?
Sorry for my ignorance, but I am a beginner in this program...
Maybe you are looking for
-
How can I get Firefox to look at the way he did before the upgrade
Firefox used to look OK until it updated itself. I don't like the small search box and the list of available languages more other admin. options when I open Firefox. What you had before was more like the entry to a search engine screen, but your rece
-
Multisession CD burning, but I can not play!
I like to burn my music on CD and often use the option 'multisession' during their combustion. The only problem is, I can't play!
-
Removal of the SBS 2011 server how to migrate DHCP and DNS services to the firewall
I have a small client that has an old server that comes close to falling; its off primary runnign the disk space and must often be restarted. they do not need the server and it was decided to remove the server and use a working group with NAS drive
-
I need to address and mail about 100 letters y at - it a program that can help me do more effiently...
-
Smartphone blackBerry OS 7 on blackberry torch 9800
Please we need OS 7 on blackberry torch, anyway to update my bb OS 7?