is it possible to configure VPN on airport Time capsule?

We have a private network can I put this VAC on the TC VPN?

Sorry, but there is no VPN on a TC to define parameters.

Tags: Wireless

Similar Questions

  • Is it possible to remote access to files on airport time capsule without a great second computer mac at home?

    Hello!

    I read the articles on access distance to another mac, but what I need is to remote access to files on airport time capsule without a great second computer mac at home.

    Only Mac... Mac you will use for remote access to files on the Time Capsule... is necessary.

    Set up and use Back to My Mac

  • Airport Time Capsule ethernet and WiFi installation

    I am trying to set up my home network, but also, somehow, the practice run for the configuration of my future business...

    Here is the component.

    -Modem: Fast 5250 BELL FIBE Home Hub 2000.

    -Airport Time Capsule 1 t (a big)

    -AirPort Extreme (large)

    -AirPort Express (size of the Apple TV)

    Here are the different coverage area and device usually used in the:

    -office: Printer via USB or ethernet, ethernet MacPro, 2xMacBookAir.

    -Living room: Smart TV, Apple TV2, PS4 (all via ethernet if possible) as well as a bunch of iOS devices and laptop computer via a Wi - Fi connection

    -In room: IOS, Apple TV via Wi - Fi device.

    So good, here's the catch, the modem's in the entry closet surrounded by concrete, so I close the Wi - Fi on it. Cable Ethernet running from there, at the office, upstairs room and the main living area. The plan was to put the TimeCapsule 1 t in the office, extreme in the living room and express on the floor. But I already have problems that they can't be all connect via Ethernet in the modem... Oh! What a mess, he made... So I saw on the support page from apple, is it better to put the airport Time capsule 1 t as principal to create the network. So if I put the Capsule in the closet as the main will be backup my stuff via ethernet?

    Also, I have the older version of Time Capsule (dish 500 GB). Shud I use it as the main airport will be connected to it via ethernet anyway?

    And finally, I connect to the modem using PPPoE bell hand and another airport the main via Bridge DHCP mode. Is this fair?

    Probably all covered already in other posts sorry if it is redundant. Thanks in advance for taking the time to help me.

    Probably all covered already in other posts sorry if it is redundant. Thanks in advance for taking the time to help me.

    You searched for other positions that have covered this slot a form or another? Maybe you should do that first.

    Base stations-Setting up from the airport and set up a network extended wireless (802.11n)

    Airport + Wi - Fi - Apple Support

    AirPort Utility 6.x - if your base station or Time Capsule is connected to a router providing NAT and...

    If you have documentation for your devices, then read it to see if it provides assistance. And don't overlook the help to the Finder or the Airport utility menu. If you're patient probably Bob Timmons found you your topic and help you. He is the resident expert.

  • Time Machine (on Mac) does not detect the airport Time Capsule

    Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

    Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

    When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

    Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

    I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

    Any suggestions?

    Sierra has been problematic with the TC.

    1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

    2. make sure that you can actually write to disk of TC.

    Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

    Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

    3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

    4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

  • HOW THE AIRPORT TIME CAPSULE WIRELESS NETWORK IS PROTECTED?

    I implemented the airport Time Capsule, using a DSL modem connected to the internet as its bridge.  MacBook Pro was used for initial set up by the bolt of lightning to Ethernet connector and then disconnected and works perfectly.  Now, I would like to use Wi - Fi for my Samsung phone not iOS.  On the Samsung wireless I connect to my home network using a password.  Well, I don't think that a password was never set.  How can I configure my wifi at home to establish a password?   I don't think that the modem settings should enter in solving this for me, but I'll add that the modem required a static IP address be entered for this connection when its router features have been disabled for the connection of bridge.

    If the Time Capsule (TC) provides the wireless network, then you can secure it using AirPort Utility, as follows:

    • Run the AirPort Utility.
    • Select the TC and then, select change.
    • Select the wireless tab.
    • In the wireless security, select the type of security. I highly recommend that you choose: WPA2 Personal
    • Enter a password in the field password wireless. Enter the same password in the verify password.
    • Select Update.

  • Time machine can finish no backup on airport time capsule

    Time machine can finish no backup on airport time capsule.

    explanation: there is no access to the/volumes/data-1/macbook diskcopiefile xxxx.sparsebundle that is used to back-up pro (error (null))

    The network failed to halfway through the backup.

    To resolve this problem, we need to know your complete network type.

    This modem do you have? Brand and model please.

    Who is your ISP? It is important for the IPv6 configuration.

    What model is the TC?

    What the configuration of TC in the network?

    How old is the MBP? If you have an ethernet port that you use it instead of wireless?

    Is this a first backup? Or were you works well for awhile and it's broken now?

  • connection lost of rMBP vs airport Time Capsule

    It gets more frustrating and I noticed that a number of users had similar problems so I wonder if I'm missing something. Here we go:

    • Time Capsule 2 TB with the 7.7.3 airport firmware
      • Connected to the router of Virgin Media fibre optic (WiFi disabled in the box of the Virgin)
    • rMBP end of 2015 with all the updates and new OSX

    All devices (2 x 2 x 1 x PS4, iPhones, iPads) seems to work very well. Apart from my MBP. What is going on?

    • WiFi a works very well.
    • All of a sudden nothing will load.
    • I can either wait a few minutes for the connection to continue or should I switch WiFi on & off and it works fine after that for another 15 minutes.
    • Keep in mind that the connection has not declined: he is always connected and showing all the bars.
    • It makes no difference where in the House, I the Capsule is not obstructed by anything.
    • .. .and only the MBP have these problems.
    • .. with this Capsule, .and everywhere else (work, Hotels, etc.) the MBP works seamlessly with other WiFi networks.

    Any ideas? I did the factory reset - it worked once for a few weeks and then it started happening again. He did not work during the last 10 factory reset.

    I assume that you are running the latest version of El Capo on your computer?

    Have you installed upgrading it above Yosemite when you got the computer or shortly after?

    There seems to be some DNS issues strange happening.

    Wireless with Mac Laptops later issues are well known on the longer thread in this area is wireless questions about Yosemite... maybe soon overtaken by problems wireless on El Capo.

    Re: OSX Yosemite Wifi issues

    Yosemite no wired or wireless network

    I think you have to look at the posts in the region for your operating system...

    Let me recommend a few changes... You've probably seen the posts before if you've been trawling for info.

    1 make sure IPv6 for wireless is set to the local link only on the computer.

    2. make sure that all the names are short, < 10 characters, no spaces and pure alphanumeric characters.

    3 password identical, but longer. 8 to 20 characters.

    4. use the google DNS values... so, go wireless in and under the DNS tab and set up google DNS. (Or change the configuration of TC to see below static IP)

    5 is the TC in bridge mode... (It probably should be plugged into a box of blank media)

    Try using Static IP method instead... which has improved things in my configuration.

    Re: time capsule Airport Guard disconnection

  • Access the Partition on airport Time Capsule 2 TB

    I have successfully partitioned my Airport Time Capsule 500 GB for Time Machine backups and a volume of 1.5 TB to store data.  However the 1.5 TB partition is visible in the Finder when a backup Time Machine is running.  I am new to Mac and OSX.  Any help would be appreciated.  I am running OSX 10.11.2.

    Thanks in advance for any help.

    I have successfully partitioned my Airport Time Capsule 500 GB for Time Machine backups and a volume of 1.5 TB to store data.

    Actually no, you didn't partition disk of TC... you partitioned the sparsebundle (it's a virtual disk) used by TM... and this is a no... in fact, it's such a big not that I recommend you remove the TM backup by erasing the TC and try again... Make a backup clean fee with TM... and never touch again... It is reserved for the TM.

    Create your own file DMG if you insist on storing files in the TC.

    To limit the size, it might be possible to set the size of the sparsebundle max but it is not always viable.

    See here the A8.

    http://pondini.org/TM/troubleshooting.html

    See here Pondini Q3. He is old but still relevant.

    http://pondini.org/TM/Time_Capsule.html

    Just so that you understand, there is no tool partition a physical drive TC... you have to remove the disc from the CT and partition on a Mac. then put it back in the TC... This is difficult and I guarantee and will lead to continuous errors on the drive with the firmware of TC.

  • Airport Time Capsule and change provider to wide band

    I recently changed my broadband provider and need help with my Airport Time Capsule. I currently have backup via an ethernet cable wireless for Macbook Pro and iMac, Plug and connect every day (although I've never been certain that it's the right or even the simplest method.)

    (1) that I have to back my TC and, if so, should what steps I take?

    (2) should what changes I make on the iMac and Macbook Pro?

    (3) when I bought the TC on the local Apple Store, I was told there was a way in which I could have the TC located in another room of the House, connected wireless constantly and discreetly safeguard to avoid Plug and connect the cable manually each time.  I have sought confirmation of this but could not find any instructions.  Expert advice would be very welcome.

    Thank you very much.

    If your router broadband main has changed, it is often necessary to reset the TC factory and redo the installation.

    I don't know if your main router has been changed as well as the offshore service provider broadband, but if so, then, reset is necessary. Only if the TC was bridged it can be left to himself... so to speak.

    1. to answer this, I need to understand why your backup is not configured for continuous backup now.

    2. of course, it is difficult to answer this question without knowing 1. but I'm not sure why you are constantly plug and unplug the TC.

    How the iMac's internet? It is connected by ethernet to the main ISP router and then you are exchanging autour cables because the TC is not configured in the network?

    Same thing with the MBP...

    3. what said you was not quite correct...

    The TC, FAILED to connect on the main wireless router or the modem... it must use ethernet. However, ethernet can run in the next room in the House and can backup from there without problem... more wireless computers.

    You can do wireless links by adding a second router wireless to apple... but makes it much more complicated but also less reliable. Wireless links are unreliable enough without adding a second.

    The best configuration is the TC directly connected by short cord to the main modem or to the router provided by your ISP. Then tell me the make and model of this device.

    If you were hoping for hitting the autonomous TC and connect wireless to the main router which is not going to happen. Apple makes their routers NOT interface with any other wireless brand.

    Tell me how the iMac connects to internet and MBP as well.

  • iCloud photo library and airport time capsule

    I'm willing to put in place a back up of my macbook pro and think using an airport time capsule.

    However, I also want to start using iCloud photo library.  I prefer not to keep the original photos on any of my devices to keep the space they use to a minimum.  I was wondering if I can save the originals in the time capsule and also use it for back ups, although I understand that this is not the safest place to keep the two sets of data.  Alternatively, if I can get an external hard drive to time capsule with a job to organize the original photos.  Can the time capsule also back up this external hard drive.

    So I would then:

    • My macbook pro saved on the Time Capsule and, possibly, the iMac to my wife, if possible
    • Pictures saved on the hard drive external and saved on the Time Capsule
    • Photos stored in iCloud photo library

    Seems to me have asked a lot of questions and do not know if it's a very complicated way to get a result.

    1 - iCloud library is not a backup

    2 - question TM are really better ask in the forum OS for your computer - we are users of Photos either way by using TM - not the TM experts - these links are also useful - use Time Machine to back up or restore your Mac - Apple Support - http://pondini.org/TM/FAQ.html

    3 - when you have the original photos on the TM volume you do not have a backup at all - when the TM drive fails, you lose all

    4 - TM I do not (see #2) backup hard drive attached

    5 - Yes, you can back up several computer for a TC - I do hourly

    6. the best IMHO is what I do - a mac equipped with a player of great size that all photos and original and is saved by using TM hourly and a clone of all the more days and other Macs with storage drive limited with optimized photos

    LN

  • I just can't get my Airport time capsule on the internet.

    I bought an airport Time Capsule and a MacBook Air, have set up their, I access my files inside the airport TC, but I can't access the Web, away from home.

    What should I do?

    It is necessary to have a Mac at home connected to access?

    Setup using Airport utility it does not appear to me the ability to access over WAN. How can I do?

    I already configured the back to my mac option.

    Can someone help me?

    Please take a look at the following airport user tip for, at least, three methods to access your Time Capsule from a remote location.

  • I discover airport Time Capsule via a non-Apple router?

    Hi, I have a WiFi router non - Apple I want to use it as a main router. I've disabled the WiFi AirPort Time Capsule option and plugged into the LAN 1 of my primary router port. Now I can connect all devices correctly to my main router with the exception of the time Capsule. In addition, on my MacBook AirPort Utility cannot find the router Apple AirPort TimeCapsule more. Is it possible to find out the time Capsule in this way?

    The ethernet connectivity is light, the TC and the router main LAN port?

    I presume that the TC is in bridge mode? Why turn off the wifi... It's always useful to have, especially as all later Mac OS seem to expect wireless now rather than ethernet, airport utility, in particular, is lost without her.

    Plug ethernet directly in the TC from your computer...

    Change the utility Airport on ethernet... have you thought this step...? If this is not the case, the AU shows nothing.

  • Airport Time Capsule and WD MyBook

    I'm a newbie Macbook Pro owner, about a week now, El Capitan running.

    I've just hung up my Airport Time Capsule (3 t) and it seems to work, as the reports of Time Machine backup complete.  I am also connected to the WiFi Airport.

    The Installation Guide says I can connect a hard drive via the USB port.  I have connected a WD MyBook USB port; It is in the format exFAT and contains the data from my old computer to Windows 7.

    What should I do to make this available for the Macbook Pro?  I don't see anywhere in the finder.

    The time Capsule cannot read USB drives to NTFS or exFAT format. Plug it directly into the Mac.

    (144647)

  • AirPort Time Capsule Help!

    I have an airport Time Capsule, which supported my computer for the last 2 years.  We have recently changed our router and now cannot save.  This is obviously because of the wifi name and different password for what is stored in the time Capsule.  I looked at various manuals and notes help but it says click on edit and I don't see it.  There is no change when I go to Applications - Utilities - airport, just my time capsule with

    Open Airport utility. Go to wireless setup using the menu of the button on the upper part of the Airport utility display window. Here, you can change what you need to change - the network name Wi - Fi and the new password. Click Update when finished.

  • How many ethernet modem ports should have to support the airport Time Capsule

    I have a question: how many ethernet ports if a modem must support the airport Time Capsule?

    One (1)

Maybe you are looking for

  • Presario CQ57: administrator password

    Compaq Presario CQ57 asks password administrator and displays "system disabled" after three trials, and it shows the code number 52378963

  • Need information about the motherboard for NB 300-108

    Hello. I can find information on everything except the motherboard.Is someone can you please tell me what is the name of the motherboard on the NB 300-108. TKS

  • My safari has stopped working and will not charge

    My Safari has stopped working and will not reopen little matter how hard I try. I was told to paste some information on this forum.

  • Reinstall Windows after removed 10.

    I had installed Windows 10 on my Macbook through Bootcamp without a USB key. I'm not if happy with the size of the partition that I made so I decided to remove Windows 10 and reinstall. After that I removed and open Bootcamp to reinstall, it requires

  • VAIO SVE1713D1EW win 8-7 downgrade - Questions

    Hello Sony, Currently, I'm a little unsure of how to proceed here. I created a USB bootable UEFI with Windows 7 Ultimate x 64, but I'm not sure that would happen if I deleted all partitions. Question: If I remove all of the partitions is the menu of