Is it possible to find dependencies on the table given?

Similar Questions

• Regarding the dependencies on the tables

  Hi all
  
  We have 2 different databases, of which one is in oracle 11 G and the other is in oracle 9i.
  Now, the company plans to remove the oracle 9i database and move only the necessary imp of the tables in the database 11G.
  
  
  So we have here a set of tables that should be moved... I'm told to find all dependencies at this table... like in that all objects are referring to this table...
  
  
  as I have A table which is referenced by other tables, triggers, and indexes... I need the full info... How can I get for that?
  
  PL/SQL Developer installed on my machine, I have...
  
  
  There is an option that says "referenced by" when I expand the table...
  
  who did?
  
  -Karan

  ALL_DEPENDENCIES and ALL_CONSTRAINTS queries for tables under question.

• Bigger disk-swapping, but down two, possible to remove them from the table, and then expand?

  I have a R710 with a PERC 6 / i, Win 2008 R2 running. I have a small disk for the operating system, the other 5 bays are filled with 1 TB disks in a RAID array-5.

  I need to add more storage, so I want to buy three discs of 3 TB. I plan on the withdrawal of old readers, and then put it in the new, bigger. I assume that it will take 1 of the 3 TB and repair. Leaving free 2 TB disk. Repeat this step twice more, which will result in three discs of 3TO with 6 TB of disk space not used in the RAID.

  Is it possible to have the controller expand storage in my table of RAID-5 existing free space, and then delete the two remaining 1 TB disks in the array?

  Who is? Is it still possible? Or do I have to backup the data on another storage device and delete the table and simply start a new one with the three discs of 3 TB and copy the data back?

  This will not work:

  (1) the PERC 6 won't take 3 TB drives; the maximum size is 2 TB.

  (2) you cannot delete records in a table - your RAID 5 5x1TB must always have records of 5 or more (you can add without deleting).  Even when using the same number of disks, isn't it possible to do the smaller table/VD.

  (3) even if you used 2 TB disks, there is no way to expand the RAID 5 using the extra space on the disks - with 5 disks in RAID 5, it will remain the same size. The only thing you can do with the new space is to create a second RAID array on the disks (called "slice").  This new VD is handled by the operating system as another "drive."

  Keep in mind if backup and restore in a larger painting, as if the VD ('disc') is greater than 2 TB, the disc "" MUST be converted to GPT and active UEFI bootmode (instead of BIOS).  Make sure that your backup software is capable of restoring one using the BIOS install on a system UEFI (and the 'disc' TPG 'disc' MBR).

• How to find duplicates in the table

  I have a table with 3 columns
  
  name of the table - used
  
  empcode firstname lastname
  XYZ 123 pk
  yzz 456 pk
  101 kkk jk
  
  
  ALTER TABLE employee
  ADD (CONSTRAINT PRIMARY KEY employee_PK
  (empcode, firstname, lastname))
  
  
  all the three columns are as key to porimary, we are migrating the data, there are problems with the data as the cobination of all three, resulting in duplicate, in the last column is supposed to be duplicates but first two columns will not have the duplicate and a complete line of the table (combination have no duplicates)
  
  a query need to find duplicates to validate the whole lines

  (B-)

  select empcode,firstname,lastname,count(*)
  from employee
  group by empcode,firstname,lastname
  having count(*)>1;
  

• How to find which create the table?

  Let's say I have a user named IMSDBA, and many users have IMSDBA privilege account.
  They can log on using that account and do some operations under this scheme.
  
  And someday, someone has created a table under the scheme. So I wonder if it is possible to know who actually created this table?
  
  PS: Each user who can log in as IMSDBA has corresponding Emplyee ID and address related to specific PC.
  
  Any ideas would be highly appreciated :-)
  Thanks in advance!
  
  Published by: PhoenixBai on September 17, 2009 10:40

  Now, if you are using Oracle audit to audit things like CREATE TABLE for IMSDBA, SYS. AUD$ seize among other things, the USERHOST and TERMINAL. Assuming you're only worried about the direct connections, not of three applications at several levels, this should give you the information you need determine which machine was used and, therefore, that the user. In hindsight, if your database is in ARCHIVELOG mode and you have logs archived in time of creating the table, you can use LogMiner to get this information as well.

  Of course, standard safety advice would be that each user has a separate Oracle account that they use to simplify the task of checking who did what.

  Justin

• Is it possible to find and replace the index/Exhibitor in a PDF document in Acrobat?

  I'm trying to convert a massive PDF file into a Word document, but sup/exhibitor is spoil the conversion.

  
  

  Specifically, each instance of "CO2" (w / index) in my PDF eventually cut the sentence in various phrases/lines in the converted .docx.

  
  

  If I could F & R all the CO2 w / index in: CO2 with or without index, my problem would be solved!

  Michael

  There isn't really such a thing as subper/index in PDF format. There is just a text of different sizes on different baselines. So, I like the ingenuity of your idea, but I don't think that he can fly.

• I use CS6 and I try to make the text field and the identical width text boxes and so that they fill up my spine. Windows in Design mode, I can't find styles to the table styles in the cell of the styles I have unerstand where I am doing the changes

  Sorry for the typing error in "understanding." Please notify

  You're doing a

  ?

  You can style form field input and textarea with CSS code to make them the same width.

  Nancy O.

• Is find and replace - possible to find a page without instruction?

  Is it possible to search all my pages in a site and find out all the uneducated (for example without the word 'cats') is it possible to find and replace the functionality? for example to apply a negative?

  Thank you

  It is indeed possible, providing some text is inside a tag any.  It could be in a list, title, paragraph, div, etc...  Use of the Research: specific tag option.  See screenshot (excuse the sloppy image).

  

  Nancy O.

• Of the data in the table to get a tree using declarative and perform operations above.

  Hello

  I use Jdeveloper 11.1.2.4.

  I'm creating a declarative component. The component is supposed to display the data in a table and allow the user to remove entries of it.

  The table should be included in a pop-.

  From now on, I made a picture of the tree within a collection of panels. I'm creating a tree in the pagedefinition of the ViewController project file and passing the tree of the same model to the component attribute declarative. After binds the attribute passed to table component tree declarative, I am able to fill lines. First please let me know if my approach is correct or not. The user can select any row of the table and press delete. The button must remove the entry from the table. Is it possible to remove operation on the table in the declarative component.

  Thank you

  First of all, please let me know if my approach is correct or not.

  Seems ok

  The user can select any row of the table and press delete. The button must remove the entry from the table. Is it possible to remove operation on the table in the declarative component.

  You have several ways to do this:

  (a) similar to the declarative component attribute, you can bind methods, for example: ADF Essentials eCourse - declarative components ADF: work with methods

  (b) pass the name of the iterator to your component and then use it to remove programmatic in backing bean

  (c) create pageDef declarative component for, something similar to this: ADF practice: liaison for component container declarative

  Dario

• How to remove a line empty after an anchor of the table?

  We use FrameMaker 12 on Windows 7 (64-bit) platform.

  I'm working my way down to a chapter in the content of the training. I'm at halfway in the chapter, and - as fate would have - I need start a table at the top of a page.

  When I insert a table (with a caption/title at the top), FM creates an anchor at the top of the page. The space to the right of the anchor is a blank line.  In fact, I want the table to start at the top of the page without the white line to the right of the anchor.

  That's what I tried, with results:

  I put the cursor after the anchor and press DELETE.

  Result: The text * under * the table is set up above the table.

  I put the cursor after the last piece of text on the previous page and press DELETE.

  Result: The paragraph on the previous page Stoops to the next page on the top of the table, leaving a large empty space on the previous page.

  I change the start option (Table Designer) at the top of the column (or the top of the Page).

  Result: FM leaves the anchor where she was, move the table until the next page and leaves a completely blank page where the table used to be.

  Is it possible to just go up the table so that it is on the same line as the anchor?

  (And as a design tool problem, is there ALWAYS a reason why a content developer wants a complete line of vacuum over a table?)

  Thank you in advance,

  
  Tim

  Assuming that your para anchor has a spacing of X:

  • In the Paragraph Designer set it for tea by anchor, base: space: below the FMP: -x
  • In the table designer for the table, set the base: space: above: -x

  >... it NEVER is a reason why a content developer wants a complete line of vacuum over a table?

  A series of tables not run-together, sure. But the hack of negative space above there are quite often do suggests a design control.

• Is it possible to find the location in the bookmarks of a bookmark?

  From time to time, it happens that I strongly suspect that I saved a bookmark, but I do not remember exactly where, and I maybe changed a category or subcategory description bookmark in the meantime.

  I usually remember something on the bookmark that allows me to find breast show all bookmarks, but it does not give me the option to rename or re-file the bookmark, category or subcategory.

  View all bookmarks, looks that the field called 'Location' (of a bookmark) should be called "URL" and that there should be another field called 'Location' which tells you where the bookmark is breast show all bookmarks.

  Is it already possible to find the current location of the current bookmark in view all bookmarks?

  If this isn't the case, I ask it is possible.

  The text that appears in "Troubleshooting information" seems not very relevant to my question.

  Without the use of an extension cord, you can click on that bookmark to open the link in a new tab (you can also do offline), and then click the star highlighted at the right end of the address bar to open the dialog box "edit this bookmark".

  See also these two extension that adds a parent column in the Manager of bookmarks (library)

  • Show Parent Folder: https://addons.mozilla.org/firefox/addon/show-parent-folder/
  • Go Parent Folder: https://addons.mozilla.org/firefox/addon/go-parent-folder/

• Is it possible to find your apple Bluetooth pencil? I lost mine and I was walking around the House by train so he could connect to Bluetooth

  Is it possible to find your apple Bluetooth pencil?

  I lost mine and I was walking around the House by train so he could connect to the Bluetooth, but when I press pencil apple in Bluetooth settings, it says connect to connect. If he has been associated previously, should it automatically connect when bluetooth range

  None

• I block junk emails every day, always bring, I mark the email phishing scam day after day, always find them in the same places day after day after day, is it possible to stop really and how?

  I block junk emails every day, always bring, I mark the email phishing scam day after day, always find them in the same places day after day after day, is it possible to stop really and how?

  original title: tired of it

  You have posted in a forum for MSE, antivirus, antimalware application.  You must investigate e-mail options... providers (hotmail, gmail, yahoo, etc) screen several e-mail for spam.  You don't have not yet described here your email client... so there is little that anyone can tell you that generic advice.

• Couldnot load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the file specified using SharePoint Designer 2007

  I have a computer on my network when you open web files WSS 3 in SharePoint Designer 2007, I get the error 'could not load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the specified file. "I have looked through some forms on the web and have concluded that this is a problem of .NET Framework 2, but I have not managed to solve the problem. He also seems to be keep me to load the Update Services administration console on a workstation by using MMC. Other posts on my network can open/edit SharePoint web site files in SharePoint Designer 2007 without this error and open the Administrative Update Services console withpout errors. I tried a repair on .NET 2. Anyone have any suggestions on another approach to fixing .NET?

  Thanks for your suggestions.

  Jeff

  Hello

  -What is the operating system installed on your computer?

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/sharepointgeneral/threads

• "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

  Hey all,.

  I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

  Hi tripleb316,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747