Is it possible to get a new drive for Vista?

Similar Questions

• Is there a way I can get a new drive for Vista?

  Hey, I had a crash and have to do a restore of the system on the disk because mode even safe does not start. I bought my Dell computer and Windows has been pre-loaded and I lost the backup drive. Is there anyway I can contact Microsoft and receive this disc?

  Dell, not Microsoft, is responsible for the support to your computer.  Contact Dell support and request a replacement disk. Boulder computer Maven
  Most Microsoft Valuable Professional

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Is it possible to get a new replacement for XP media?

  Is it possible to get a new media, in replacement of old DVD who - by accident and a hasty movement was broken? Windows XP Pro 64-bit. I'm not sure that I posted this question on the right forum; It is both the maintenance, installation and repair (maybe). So, for this in advance.

  The following link might be worth a visit:

  (326246) how to replace software Microsoft or hardware, order
  service packs and replace product manuals
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;326246

• My vista restore disk does not start in my computer. Is it possible to get a new drive?

  Compaq PresarioSR5130NX with AMD Athlon 64 x 2 processor. Wouldn't start. Console Startup Repair did not help, not even in safe mode. Tried to restore partition, says error. Tried to restore System Restore disk. First authorized disc formatting my drive, second disk would not be executed. Now I'm stuck with no operating system and no disc to recharge. Any ideas?

  Hello

  You may have a hardware problem which is the cause.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  Read this HP information;

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  See you soon.

• I lost the disk 4 of Flight Simulator 2004. Is it possible to get a new drive 4?

  I need to know if I can get a replacement for this CD-ROM.

  Hi Marc,

  Thanks for asking the question in the Microsoft Community forum.

  Starting from your description, I understand that you have lost Flight Simulator disc and you would like to know replacement for this drive.

  I suggest you to contact Microsoft Flight support for assistance on the issue:

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/ContactingTechnicalSupport.aspx

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  Hope the above information is useful, if you have any question back to us, we are happy to help you.

  Thank you.

• No way to get a new drive for W8

  my disk is scratched and im trying to install on an SSD, it won't let me put it on a USB key or because it stops reading at some point. I tried the download w8 but my code thing is not a retail version or something.

  Can anyone help?

  How to replace hardware or lost, broken, or missing Microsoft software

  http://support.Microsoft.com/kb/326246/en-us

• Is it possible that I can get the new drive with Windows 7 activation of work without having one installed beside it?

  Hi, I bought a PC with Windows 7 pre-installed, refurbished but the case has a product key for Windows 2000, because he's company ex machine that has been upgraded. I installed a new hard drive and to keep my files, I copied all of the old disk to the new including the operating system. It worked well for a while, but I'm now getting the message "this copy of windows is not genuine". I found the product key of the old drive, but when I enter it on the new one it always says that it is not authentic. Is it possible that I can get the new drive to work without the one installed beside it?

  Original title: activate windows 7

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  What's the relationship between activation and genuine Windows?
  http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-Windows

  What is the validation, and how does it work?
  Windows 7: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=win7
  Vista: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=winvista

  Authentic Microsoft software program privacy statement
  What data is collected?
  http://Windows.Microsoft.com/en-us/Windows/genuine/privacy-statement

  - Product key numbers and letters .

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Is it possible to get a new CD or download an ISO of Windows 95?

  Exchange for Windows 95

  I have a CD of Windows 95 when I had an old computer. I tried to install Windows 95 on CD (in a VM). Unfortunately, the CD is damaged and cannot be read completely.

  Is it possible to get a new CD or download an ISO or something? I want Windows 95 because it is its small size.

  Thank you

  You can check the auction sites or retro software who resell old versions of Windows.

  Amazon.com has for 34.99
  http://www.Amazon.com/Microsoft-software-Windows-95/DP/B000NRY05G
  You can also check ebay.

• Satellite P20: Need new driver for Atheros AR5001X?

  Hello

  Could someone help me to get the latest driver for Atheros AR5001X on Satellite P20 wireless network card?

  My version of the driver is 2.4.2.14.

  I have a problem to connect wireless NETGEAR DG834G on Atheros AR5001X P20. NETGEAR suggested to update the driver for Atheros AR5001X wireless adapter.
  Atheros website has not as of any utility download driver (useless!), no new information of driver for this wireless card on the Web from TOSHIBA site.

  Someone at - it had a similar problem? How you solve the problem?

  Thank you

  Hi Tak

  The WiFi card is properly installed and configured on the right should avoid any problems.
  Can you please explain what kind of problem you have?
  You see the WLAN on your device?

  I tried to connect my P20-303 on Netgear WGT634U friends and it works well.

  Good bye

• Satellite P100-160: How do I get an audio driver for XP

  Can someone tell me how to get a sound driver for the P100-160.

  I have a bought a machine expect to be able to use it for my work, as Vista does not support applications that I use I have to install XP. Then I find that Toshiba seem to have selected the material that is not compatible with the drivers for XP and XP. The only ones that seem to work (after wasting much time on trial and error and forcing drivers) work very well for the session (showing that it is technically possible) but stop working after a reboot.

  Someone at - it an idea how to solve this problem? (No, I do not accept the answer 'buy a XP machine', people write drivers from scratch for Linux by reverse engineering, I'm sure that the producers of the sound card can make one for XP)

  Hi guys

  Please check section P Satellite and you will find useful topics how to install and configure Windows XP Home on Satellite P100. Some users have reported on the installation of Windows XP Home edition successfully.

  BTW: don't wait for the drivers of Toshiba. It may take some time. Of course, any upgrade support is not finished and, as you know, the upgrade is more important than the downgrade.

• Photosmart all-in - One 7520: new driver for Mac El Capitan in a 7520

  I installed my OS from Mac to El Capitan (10,11) 2 days.

  Have the camera HP Photosmart all-in-One 7520.  The printer driver will only up to Mountain Lion (10.6).  The printer works, but the scanner does not work.

  I had Geek Squad go through everything on computer, looking for latest info on your site, etc.  Conclusion: Need new driver for the scanner compatible with El Capitan.

  Is a new driver in preparation?  I would like to know as soon as it is available, because I scan a lot of information every week.

  Thank you.

  Hi @DStrick,

  Glad to see that you are using the HP forums, this is a great question other customers might wonder about too! I can help you get the required software for your 7520 for use with El Capitan! Once solve us the problem, please state the position which I accept as a Solution to help others find the answer to your question!

  This download package contains the complete software solution for Mac OS X El Capitan including all drivers and software needed: file name: HP-inkjet ink-SW-OSX - Mavericks_v12.34.44.dmg

  This software has been updated 1 October 2015 and can be found here: software and driver downloads for the Photosmart 7520

  Please let me know if this actually solves the problem, or if you need assistance. Thank you.

• Can I request a new installation for Vista disk and drivers of my laptop after formatting my hard drive?

  I have a stubborn reality and impossible to get rid of the virus on my main hard drive and I think to format and to nine.  I want to know if there is a way to get a new installation of Vista for a clean install disc and a disk for the drivers of my laptop.

  Other info: number of grain of Vista is ripped but I have the model number for my laptop if that should be necessary.

  Hello

  After you have lost your product key shrinks your methods

  key finder programs won't asssit you if it is preinstalled

  Here are the different ways let you reinstall vista;

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• HP Envy 110 is not printing/scanning after new driver for OSX Maverick

  Installed the new driver for the operating system MAC OSX 10.9.4.  After installation, I can not print or scan wireless even if the screen of the printer indicates that it is connected to the network from my computer.

  When you try to print, repeatedly get an error message "Cannot find printer.   Strangely, if I turn printer on, and besides, the page is printed.  This continues to happen whenever I try to print.

  In addition, I can scan only the computer.  If I try to scan directly from the printer, I get the following error message: "make sure that your HP printer software is installed.

  I have installed and reinstalled the new driver several times to nothing does not.  I also rebooted both my computer and my network without success.

  Does anyone else have this problem?

  Hi Melnee ,

  What you have described, it is clear that a disconnect occurs on the side of the router, maybe a problem with the ports.  I recommend you only to contact the manufacturer of your router, as to resolve any problems that occur in the router.

  Please hold me.

• Where is the new driver for the DesignJet 1000 series?

  I am registered for the driver and Support alerts.  Today I received this for our 1050c HP large-format printer (plotter):

  Routine Driver Alert , August 10, 2011
  Products of the series of printers HP Designjet 1000 light Installer more HP ePrint and share (ver v447.40.4200): HP Designjet 1000 Printer series
  OS: Windows
  Description: This package installs the drivers for 32-bit and 64-bit platforms, and also includes the package of ICC profiles to provide a set of color for types of HP paper profiles.

  However, when I click on the link, I am told:

  We're sorry, we couldn't find the document description driver you asked.

  Subscribe to the drivers and support alerts to be notified when information is added.

  Which is exactly what started the process.

  I am not really interested in the ePrint and store solution.  However, I am interested in new drivers when they come out.

  It is a tracer of several years old we are out of warranty.  Which excludes me an online chat with someone at HP who could tell me the download link.

  My current driver is 4.8.4.  This seems to be a series of numbering different from what is stated above.  My hypothesis is that the link above includes a newer driver than what I use.

  Anyone know where to get this new driver, or know where I can contact HP directly to find out?

  Thank you!

  The only thing I find is the ePrint and share stuff here.   You can have the best results, post in the forum HP Designjet here, Designjet experts hang out there.