is it possible to know the device password value or not?

Similar Questions

• Pavilion 10 TS: Opportunity computer HP laptop, don't know the Bios password.

  Hi, just bought a Pavilion 10TS NET and the former owner does not know the Bios password.

  I had some tests using obvious passwords but not joy and have the code of 8 numbers on the lock screen, 38445237,

  can anyone help with the answer password please. I tried the generator code, but to no avail.

  Here's hoping you guys might be able to help.

  Thanks in advance.

  Hello

  Yes, I know what you mean about access to the battery

  If it is possible to connect to the system board power Board, when he was abducted, all this and hold down the power button - otherwise, let the RTC for a few hours to make sure.

  Kind regards

  DP - K

• Mr President, I put in my window 7 Professional which I totally forgot the admin password, I'm not able to use my computer, is it possible to recover the admin password?

  Mr President.

  I got the admin password in my window 7 Professional which I totally forgot, I'm not able to use my computer, is it possible to recover the admin password?

  There is no way to retrieve a forgotten password. However, you can do this:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point until you have changed the password.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key.

• HP S55 10y: don't know the BIOS password

  Im trying to reimage my office but I don't know the BIOS password to change settings. Someone please HELP! Laughing out loud

  Hello:

  Instructions to clear the password of the BIOS for your model are at the link below, under clearing BIOS settings > clear the BIOS password.

  There's a separate rider to clear the BIOS password, and instructions as written should work.

  http://support.HP.com/us-en/product/HP-Pavilion-slimline-S5000-desktop-PC-series/4162194/model/4206396/document/c01701270/

• Re: Equium M50 - do not know the admin password

  Need to run the recover console on my M50 pre-installed, but do not know the password - HELP!

  Hi loneraver,

  Why you n t know the admin password? Normally all passwords will be defined by the user, or in other words, I suppose that you have set all passwords.

  Unfortunately if you n t know the password more you have to reinstall the entire operating system. So take the Toshiba Recovery disk or the Microsoft disk to reinstall Windows.

• Password reset: I'm using vista I forgot the password to the file encreption and I do not know the supervisor password

  I'm using vista I forgot the password to the file encreption and I do not know the supervisor password. Thanks for the help

  I'm using vista I forgot the password to the file encreption and I do not know the supervisor password. Thanks for the help

  Can't do anything without your password 'supervisor '. Go talk to this person.

  We are not allowed to help users to bypass the administrator password protection. Penalty should be banned from all the Microsoft forums.

  t-4-2

• It is possible to disable the windows password request for Windows 8?

  OT: password.

  It is possible to disable the windows password request for Windows 8?

  Hello

  Control Panel - Power Options - "require a password on wakeup" - value "need not."
  -Save the changes.

  Desktop computer (Windows key + D) - right click on an empty area - customize - lower right Screen Saver.
  Uncheck the box - the resume, login screen - APPLY - OK.

  ----------------------------------------------------------------------------------------------------

  How to make so that Windows 8 connect you to a user automatically at startup account
  http://www.eightforums.com/tutorials/2894-log-user-account-automatically-Windows-8-startup.html

  See #5

  Or use this method:

  How to turn on or off course connect by using Ctrl + Alt + Del in Windows 8
  http://www.eightforums.com/tutorials/5761-secure-sign-CTRL-ALT-DELETE-enable-disable-Windows-8-a.html

  Others:

  How to automatically log on to Windows 8 [direct access]
  http://www.AddictiveTips.com/Windows-Tips/how-to-automatically-login-to-Windows-8-direct-logon/

  Windows 8, how to connect automatically
  http://www.gHacks.NET/2011/09/16/Windows-8-How-to-automatically-log-on/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Network troubleshooting is he diagnosed "your computer is correctly configured, but the device dns server is not responding...". How can I fix it

  I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond.  How can I fix this problem please?

  Hello

  1. what operating system is installed on your computer?

  2. are you using wired or Wi - Fi?

  3. you will remember to do recent changes on the computer before this problem?

  I suggest you

  Method 1:

  Empty the Cache DNS (Domain Name System) follow the steps below:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns.

  Method 2:

  If the previous step fails, follow these steps and check if the problem persists:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://support.Microsoft.com/kb/928152

  For more information, check the following links:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• The CSK password specified is not valid.

  Hello!

  I am creating an application web wrapper that points to a fixed URL. The application seems to work fine in debug mode. But I can't get the signed Release version. I use:

  • WebWorks 2.0.0.54
  • 32 bit Java 1.7.0_45
  • BB10 Device Simulator BB10_2_1.1925

  I followed the instructions and have generated a BlackBerry ID, downloaded a bbidtoken.cskand generated a developer certified using the following command:

  BlackBerry-keytool - genkeypair - storepass xyz - dname "cn = abc"

  The two lands of files in the folder AppData/Local/Research In Motion . I run the following command for the build version:

  WebWorks build - release - keystorepass xyz

  How I get messages indicating the creation of the packages and then the following message appears:

  [ERROR] The CSK password specified is not valid.

  I repeated the generation BlackBerry ID and then the next generation of developer certificate once, twice, three times... ten times... to nothing done.

  What I am doing wrong? And what CSK file is served here, the bbidtoken.csk or another file that I completely missed? Any help is greatly appreciated.

  Kind regards

  Well, I actually had time to read the text with a lot of attention to each step, then... Well... I should have done the first time around. If the problem was that I was specifying the password BlackBerry ID was too long. There is some text above the field that contains 6 to 10 characters which I had totally ignored.

  I'm surprised the shape does not check the length, or the error message does not indicate length as the problem, but still, I should have read this line here.

  Thanks for the help!

• NI LabVIEW driver for the SRS DS345 function generator generates error "(Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system."

  Hello

  We have a generator function SRS DS345.

  I just downloaded the driver NOR for the instrument on http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748....

  After installation, the DS345 appears in MAX, and I can well communicate with him.

  However, if I run the srds345 to Started.vi, I get an error "location information insufficient (Hex 0xBFFF0011) or the device or resource is not present in the system" from initialize it with Options.vi srds345 sub - vi.

  The only change I did Exchange address GPIB 14 to 19, which is our function generator GPIB address. In addition, the

  Functions of SRS DS345 generator of function palette is empty, even after you restart LabVIEW (see attachment). I'm using LabVIEW 8.5.1.

  Your help in resolving this issue is appreciated. Thank you.

  Best regards

  Peter

  Have you installed the driver from LabVIEW or copied directly from inst.lib?

  The first is easier, and you don't have to restart LV more...

  Error in a not filled gpib address points. I have not checked if this driver has a resource name visa or a string of gpib address old but in the first case, try the little triangle on the right at the slect address instead of by hand.

• Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated

  Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...

  Hey James,.

  I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks again
  OK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help!

• The device Optiarc DVD RW not working not not on HP Pavilion dv9000 notebook

  The device Optiarc DVD RW not working not not on HP Pavilion dv9000 notebook... When I insert a dvd/cd he made just loads off noise and won't load anything. When I try to go into MyComputer to manually load theres nothing showing there just my local disk... one of my friends said that it mite Miss port or driver... could someone help please

  Thank you

  ·                        http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot change some Raw files: "it is not possible to complete the command because there is not enough memory (RAW)" [was: what to do?]

  I am editing some photos for my work and they are all in RAW, but when I try to open some, they give that 'it is not possible to complete the command because there is not enough memory (RAW)"what should I do?

  Please open Photoshop and go help > System Info > copyand fill with dough this thread with Ctrl v

• Writable failing Volumes and Appstacks with "the device object parameter is not a valid object" at the launch of a .exe

  Previously, this error had been random between Appstacks and accessible volumes in writing, but became extremely coherent.   The full message is something like:

  C:\Program Files (x 86) \Mozilla Firefox\firefox.exe

  The device object parameter is not a valid object or is not attached to the volume specified by the file name.

  This accessible volume in writing will occur in a profile only (and UIA + profile) try to download and install the application, or what UIA only is only enabled when you try to run the installed applications.   It's almost as if the volume is not read/write permissions, but other information, such as the request for detailed information about the profiles are stored and used correctly.

  Running version 2.9

  Update - it seems that the question was of App - V Client being installed.

• Qosmio x 300 15 t drive hard master wrong password, but know the user password

  I don't know if it's in the right forum, but I have a problem with my internal hard drive. I put a main HARD drive password and user password using the BIOS HARD drive. Some time later I discovered I have to tapping the bad HARD drive a master twice on the confirmation, as it is coming from wrong when I try to remove it! I can still access the floppy using the password 'user HDD' both within the laptop, but a HARD one master drive value, I can't remove the locks. This means that I can't get out my drive and put it in a USB caddy or access it from another PC or laptop. I backed up all that is on it, so data loss is not a concern, but is it possible to remove the password if you know the password? I don't want to use this drive in my laptop, and then my laptop if effrondrent on me that the hard drive is basically locked on this laptop unless I find a way to get rid of the master password - that would mean the loss of data in the future to come if the laptop is dead!
  The drive is a TOSHIBA MK1059GSM with firmware 50IDF3DMS (I post the serial number). I would just buy a new drive, but as it is a 1000 GB, and they are expensive, I would find a means to correct the password to disk than to spend the money a brand-new car. Like I said, data loss is not a concern, I just want to go to a fully usable state!
  If anyone knows a solution, please let me know!

  Thank you very much for this useful information, samspin!

  I saved this thread in my bookmarks :)