The device Optiarc DVD RW not working not not on HP Pavilion dv9000 notebook

Similar Questions

• NI LabVIEW driver for the SRS DS345 function generator generates error "(Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system."

  Hello

  We have a generator function SRS DS345.

  I just downloaded the driver NOR for the instrument on http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748....

  After installation, the DS345 appears in MAX, and I can well communicate with him.

  However, if I run the srds345 to Started.vi, I get an error "location information insufficient (Hex 0xBFFF0011) or the device or resource is not present in the system" from initialize it with Options.vi srds345 sub - vi.

  The only change I did Exchange address GPIB 14 to 19, which is our function generator GPIB address. In addition, the

  Functions of SRS DS345 generator of function palette is empty, even after you restart LabVIEW (see attachment). I'm using LabVIEW 8.5.1.

  Your help in resolving this issue is appreciated. Thank you.

  Best regards

  Peter

  Have you installed the driver from LabVIEW or copied directly from inst.lib?

  The first is easier, and you don't have to restart LV more...

  Error in a not filled gpib address points. I have not checked if this driver has a resource name visa or a string of gpib address old but in the first case, try the little triangle on the right at the slect address instead of by hand.

• Network troubleshooting is he diagnosed "your computer is correctly configured, but the device dns server is not responding...". How can I fix it

  I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond.  How can I fix this problem please?

  Hello

  1. what operating system is installed on your computer?

  2. are you using wired or Wi - Fi?

  3. you will remember to do recent changes on the computer before this problem?

  I suggest you

  Method 1:

  Empty the Cache DNS (Domain Name System) follow the steps below:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns.

  Method 2:

  If the previous step fails, follow these steps and check if the problem persists:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://support.Microsoft.com/kb/928152

  For more information, check the following links:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Writable failing Volumes and Appstacks with "the device object parameter is not a valid object" at the launch of a .exe

  Previously, this error had been random between Appstacks and accessible volumes in writing, but became extremely coherent.   The full message is something like:

  C:\Program Files (x 86) \Mozilla Firefox\firefox.exe

  The device object parameter is not a valid object or is not attached to the volume specified by the file name.

  This accessible volume in writing will occur in a profile only (and UIA + profile) try to download and install the application, or what UIA only is only enabled when you try to run the installed applications.   It's almost as if the volume is not read/write permissions, but other information, such as the request for detailed information about the profiles are stored and used correctly.

  Running version 2.9

  Update - it seems that the question was of App - V Client being installed.

• How to get the device model, for example app works on PlayBoook or BlackBerry 10?

  How to get the device model, for example app works on PlayBoook or BlackBerry 10?

  You can use this class: http://goo.gl/GtMLP for information on devices

  something like this:

  String myDeviceModel = android.os.Build.MODEL;
  String myDeviceBrand = android.os.Build.BRAND;
  String myDeviceDevice = android.os.Build.DEVICE;
  

• Of the 10 elements DVD does not work

  Hi I just bought 10 items and when trying to install, the first DVD will not autorun. I'm on OS 10.6.8.

  I tried to go to the DVD through Finder, to run the autorun and Setup, but they open just in Quick Edit.

  Any help appreciated eb woulld.

  If you try to use the Windows DVD? The operating system is probably marked on the DVD, so you could just double check that you are using the correct disk. Descriptions and installation instructions are here: http://helpx.adobe.com/photoshop-elements/kb/install-premiere-elements-photoshop-elements. html

  Let us know that you are able to install after you follow the instructions.

• ATAPI DVD A DH16AYH ATA Device read DVD but not CD

  Engraver of CD/DVD in Compaq Presario 5010NX w / VistaBasic read any DVD but has problems with CD if I insert a music CD, sometimes it will open right and I can play music. Most of the time he just tells me to "insert a disc", usually open the status bar, but not always. If I close the drawer [or eject and close the tray] from 3 to 15 times, he finally opens the CD. Generally. Sometimes I drop and open it on my old computer Millennium, [which never fails to open the CD].  I bought a cleaning disc, but it still happens. Also, it stopped opening the tray with the manual key (1,200 works tent) and will always open with 'Eject' of the computer, but only with DVD and sometimes will open with the "eject" computer with the CD never if it is empty, so I always keep a known disc "opener" in the status bar. (if I forgot, I use a paper clip)

  I did an online search of the Device Manager for a driver update and he told me that the best software is already installed. I just need a new burner? Why is - that it will work with DVD CD not? driving me crazy. Thank you ps can not find a burner mfgr. says simply "drive SuperMulti DVD with Lightscribe" - pps I tried uninstalling the Device Manager, and then restart the computer - no change.  Haven't tried the support.microsoft.com/gp/cd_dvd_drive_problems diagnostic program no solution I came across a post from someone else who had the same problem [former position & 'uninstall & reboot' was the only suggestion on this one.]   I can't believe that it could be physical burner... why he wouldn't hesitate to read the DVD if it was a physical problem?  Help?

  Hello

  Check with Compaq Support, their drivers and documentation online and apply to the
  HP forums for known issues. Compaq can give you more information on the disk.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/

  ==================================================================

  Readers to use and this intermittent problem can be caused by wear.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• After the BIOS update DVD driver not reading not DVD - Sat A80

  Hello

  I have a Satellite A80-131 and after bios update (latest version 2.5) by windows update procedure, my DVD do not read DVD media more. It is possible to play CD but not a DVD media.

  Can I reinstall the old bios? Can I reinstall the firmware?

  Thank you
  Ronai Lisboa

  Hello

  Strange!
  On the Toshiba driver page, you will find also 2 Firmware updates.
  Check which drive you unit and try to update the firmware.
  Also try installing the DVD ram driver.

  PS: It is not possible to roll back the BIOS or install the first version of the BIOS on the device. Only the Toshiba service partner may DOWNGRADE the BIOS

• VISA: (Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system.

  See the other post on this subject, but my situation appeared a bit different (http://forums.ni.com/t5/LabVIEW/VISA-Hex-0xBFFF0011-Insufficient-location-information-or-the/td-p/69...

  My device manager says that the device is functioning correctly, MAX also tells me that the device is working properly, but I still get this error when I try to open a panel of test VISA in MAX or log VISA in labview.  When I click on validate in MAX under port settings that she even says that he opened a successful session of VISA.  But it does not connect in the Panel test VISA or in labview.  See the screenshots below.

  No device manager said that all was well with COM1, see the pictures attached.  I was able to get this working to uninstall the device and the removal of all the drivers and reinstalling.  Don't know what the problem was, but from the entire apparatus of zero was able to fix it.

• Why is unknown in the device manager that will not disappear with the update disc

  Its been two weeks preparing the motherboard as possible for the repair of the BONE, but there is now an unknown in device Mangr which did not exist before that I was doing all the Driver Update with the drive to the motherboard. Will be also someone please tell me why a CD with drivers for ASUS and motherboard support options change to a file only as reading support only, but it was like an installation disk? I mean he had the factor graph and as multi-format, now it gives just files and are not a pleasure drive anymore? Can I change it back? What happened to him? I did try and she put the BIOS on diskette for a flash for a one-way effort, but it has not worked for me! I messed up the CD? I don't see how?

  Hello

  • This "graphic factor" are you referring?
   
  You can check this link:
   
  How to troubleshoot unknown devices listed in Device Manager in Windows XP
   
  http://support.Microsoft.com/kb/314464
  

• How can I install / find drivers for travel Pro BT for W7 Starter Plantronics headset? Have run FIX IT routine for the DEVICES, but this has not solved the problem

  Broadcom BT radio detects the Plantronics headset, adds the device, and then advises that pilots cannot be found.

  I've updated the MS Bluetooth Module software, run it DIFFICULTY for equipment and devices, removed the Plantronics and added again to the BT devices, but still get the same error message.

  From Plantronics Web site advises that the necessary drivers must be provided by the site of the BONE, that is to say of W7.

  I confirmed that the BT Radio is working normally.

  TIA

  Peter K

  Hi PeterKvietinskas,

  It is sufficient to indicate the complete error message you receive.

  Method 1: You can follow the steps mentioned in the link below

  My computer does not recognize my Bluetooth device.

  (Article applies to Windows Vista, not valid for Windows 7)

  Method 2: Download and install all available Windows Update

  Install Windows Update

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You might want to know

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

• The device name is displayed not in the newspapers of the Administration

  I chose to have the R7000 email logs to me every night.

  Unfortunately, I noticed that the newspapers do not include the name of the device as well as MAC and IP addresses for each entry.

  I can see the device name in the genius of Netgear-> screen of connected devices, then why are they not available in the papers sent to me?

  Thank you.

  Oh! I apologize, but it does not include those.

  What follows is the only will be included:

  

• WINDOWS MEDIA PLAYER SYNC ALWAYS SAYS "ALREADY ON THE DEVICE" WHEN HE IS NOT ON THE DEVICE.

  I went on wmp to sync mp3 files on my Creative Zen MP3, but when I try and synchronize it always already says "on the currency." But when I check my mp3 songs are not on the device. If anyone has a solution please tell me.

  Hi QALY,

  Formatting the player Creative Zen MP3 should help you solve the problem of synchronization.

  Note: Formatting the player Creative Zen MP3 will delete all the data on the MP3 player. Make sure to save your songs before formatting the MP3 player.

  After formatting the MP3 Player try to check if you can sync without any problems.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• External BB10 Webworks/Cordova opening HTML pages on the device: "this file is not found. Check the URL and try again. »

  Hello fellow people,.

  IM quite in my application of Cordova/Webworks which downloads and save an html file in the SD (blackberry.io.sharedFolder).

  At this point, the config.xml file is defined as:

  read_device_identifying_informationermit >

  access_sharedermit >

  ermissions >

  Now, I'm trying to open the downloaded html that is saved to file:

  /Accounts/1000/removable/SDCard/MainFolder/subfolder/file.html

  My webapp, I try to open as: window.open (path, _self);

  Where path is the file above (which exists on the device!)

  Path is also, with the blackberry.io.SharedFolder + "/ MainFolder/SubFolder/file.html".< of="" that="">

  Also, I get the error:

  This file is not found. Check the URL and try again. If the URL is correct, check that your card is correctly inserted on your device.

  I am running and development off the BB10 Simulator.

  The console does not throw any error that I see.

  Any help or advice would be appreciated.

  See you soon,.

  @varunasingh

  Well, this is awkward.

  I have myself fixed by adding the string: "file://" on my road.

  I hope that others see it until they are too uptight.

  This has been resolved. Thanks for reading.

• My HP 6735 s webcam has disappeared from the Device Manager... has worked very well in the past... where is he now please?

  Webcam worked for months but is not, nor in the Device Manager. When using Skype it says buy a webcam!

  Hello

  I suggest you to follow the steps from the link provided below and check if it helps:

  HP Notebook PC - test Webcam Vista with QuickPlay
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00865850&lang=en&cc=UK&TaskID=125&ContentType=SupportFAQ&prodSeriesId=3687621&prodTypeId=321957

  Hope this helps,