Is it possible to look at the source code of the waterfall?

Similar Questions

• Is it possible to look at the code generated using the timeline?

  I'm sitting here grumbling because my super-easy slideshow look right and I know that if I used the tools of design/timeline, would be perfect.  The only problem is, I want to load my images using an XML file and the only way I know to do is to go strictly code.  Is it possible for me to do the interpolation using the timeline and view the code that generates lightning to start the slide show.  It would be a very useful learning tool.

  Create your pre-teen.  Right-click on one of the tween frames and click on copy movement in as3 and paste the code to inspect or use.

• JSF - lack of source code using the creation of models and composition

  It's really strange, or maybe I don't understand JSF.
  
  Supposedly to make the long story short, I have the following:
  
  a. masterLayout.xhtml file - primary model
  b. file myPractice.xhtml - compositions that uses templates to file masterLayout.xhtml
  
  masterLayout.xhtml page go to myPractice.xhtml (using ajax). The myPractice.xhtml rendered correctly - shows all components of the model and its own page. But when I check the "see source code page", I see the source code of masterLayout.xhtml.
  
  Here is the part of the source code:
  
  IMPORTANT NOTE: masterLayout.xhtml has a COMMANDBUTTON RICHFACES (a4j:commandButton) WHICH RENDER THE PANEL ID "MyPractice" FOUND IN myPractice.xhtml. Means that this rendering of the page via ajax commandButton control.
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  masterLayout.xhtml (model)
  
  :
  < a4j:commandButton styleClass = "#{control.myPracticeStyle}" value = "MY PRACTICE" action = "myPractice' actionListener =" #{control.myPracticeAction} "make = 'myPractice' / > '.
  :
  < style tr = "height: 780px;" >
  < style td = ' width: 8%; ' > < table >
  < style td = ' width: 8%; ">
  & #060; br / >
  < name ui:insert 'content' = >
  < / ui:insert >
  < table >
  < style td = ' width: 8%; ' > < table >
  < /tr >
  
  < /table >
  
  < / rich: panel >
  
  < / h:form >
  
  You can see the ui: insert above.
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  myPractice.xhtml
  
  "< ui:composition template="/templates/masterLayout.xhtml ">
  
  < ui: set name = "content" >
  
  < id rich: panel = "myPractice" style = "height: 764px; border: 0px; padding: 0px; ">
  
  < table width = "100%" border = "0" cellpadding = "0" cellspacing = "0" >
  
  < b >
  
  < style td = "width: 100%;" >
  
  < h:panelGrid style = "width: 100%;" cellpadding = "0" cellspacing = "0" >
  
  < f: facet name = "header" >
  
  < h:panelGrid style = "width: 100%;" cellpadding = "0" cellspacing = "0" columns = "5" columnClasses = "overviewTabColumn, aumTabColumn, feesTabColumn, cashFlowTabColumn, emptyTabColumn" >
  
  < a4j:commandButton styleClass = "#{control.overviewStyle}" value = "OVERVIEW" action = 'Preview' actionListener = "#{control.overviewAction}" make = 'Preview' / > '.
  
  < a4j:commandButton styleClass = "#{control.aumStyle} ' value = 'AUM' action = 'aum' actionListener =" #{control.aumAction} "make = 'aum' / > '.
  
  < a4j:commandButton styleClass = "#{control.feesStyle} ' value = 'FEES' action = 'fees' actionListener =" #{control.feesAction} "make = 'fees' / > '.
  
  < a4j:commandButton styleClass = "#{control.cashFlowStyle}" value = "CASH FLOW" action = "Cash Flow" actionListener = "#{control.cashFlowAction}" make = 'Cash Flow' / > '.
  
  < h:outputText value = "" style = "width: 100%;" / > "
  
  
  < / h:panelGrid >
  
  < / f: facet >
  
  < / h:panelGrid >
  
  < table >
  
  < /tr >
  
  < b >
  
  < td > < table >
  
  < /tr >
  
  < b >
  < td >
  < name ui:insert 'subContent' = >
  < / ui:insert >
  < table >
  < /tr >
  
  < /table >
  
  < / rich: panel >
  
  < / ui: define >
  
  < ui:composition >
  
  This set define supposed to go in the ui section: masterLayout.xhtml insert.
  
  ===================================================================================================
  
  Source of real "see Page" FireFox or IE when myPractice.xhtml is made and displayed.
  
  < style tr = "height: 780px;" >
  < style td = ' width: 8%; ' > < table >
  < style td = ' width: 8%; ">
  & #060; br / > < = missing source code?
  < table >
  < style td = ' width: 8%; ' > < table >
  < /tr >
  
  < / div >
  < div >
  
  "< input type ="hidden"name ="javax.faces.ViewState"id =" javax.faces.ViewState "value ="-2088890247043631074:-2632132869735171398 "
  AutoComplete = "off" / >
  
  < / make >
  
  < / body >
  
  < / html >
  < / ui:composition >
  
  If you look at this "source code" view Page"carefully comparing to masterLayout.xhtml, from the height: 780px, you will notice the name of ui: insert section = 'content' is... empty.

  When you "view source" you made an another GET, that renders the page in its original state. It is not the source as it is currently displayed for example after a button push.

• Disabling the display of Source Code on a Web Site

  How do your prevent a user from site to look at your source code by right-clicking of the mouse?

  I wouldn't waste your time. Even if you do not disable right-click on the page, there still many, many ways to get the code of the site.

• Is it possible to search the source code is located in the remote server files?

  The search feature is very robust for local files, however, is it possible to search for files remotely?

  I'm not interested in the feature "Search and replace", just looking for source code in the files on the remote server.

  The search function in DW only works on local files.  You would need to GET all files to your server first and then perform a search on all of your local site.

  Or use another tool:

  http://ALT-Web.com/articles/remove-unused-site-files.shtml

  Nancy O.

• It is possible to look back in the history of more than 7 days?

  Is it possible t0 look back into history for more than 7 days?
  7 days is the default...

  Thank you for your comment.

  Jan

  Try this.

  • In the address bar, type Subject: config , and then click OK.
  • Copy and paste the following in the filter at the top: browser.history_expire_days to isolate this setting.
  • Presumably, he'll say '7' because that's all you can see. Then right-click and choose Edit from the menu, delete the figure who's there and replace it with 180
  • Then go to file | Exit, restart Firefox and do a little surfing accumulate a bit of history.

  Check back tomorrow to see if anything has changed.

• Looking for the text of the "Microsoft Shared Source License Version 1.0 for Windows CE"

  Hello

  I am looking for the text of the "Microsoft Shared Source License Version 1.0 for Windows CE".

  With the help of Bing or Google gave the text of this license.

  I am looking for the text of the license, because I have a piece of source code that has the following file header and I would like to know what are the exact conditions for the use of this source code.

  //
  Copyright (c) Microsoft Corporation.  All rights reserved.
  //
  //
  This source code is under the Microsoft Shared Source license
  Version 1.0 for Windows CE.
  For a copy of the license, visit http://go.microsoft.com/fwlink/?LinkId=3223.
  //

  Unfortunately, the link is dead.

  Kind regards
  Mark

  PS: Yes, I know that my question is not a perfect match for this forum but the Microsoft Ribha Customer Service Representative (manager is Lalita) recommend to post my question here.

  The license can be found here:
   
  http://msdn.Microsoft.com/en-us/Aa714463
   
   

• Why can't get us the source code Freelancer?

  I understand that this is probably the wrong way to go, but since I don't know any other way, so this seems the best solution currently.

  Freelancer is a 2003 game who appreciated the merits of a hosted Microsoft 'global server' for many years. This support has been removed for more than a year, have been longer. Since then, she has in fact the players, or the community of developers, which has instead created a way not no need for this global server, while keeping the same features in the game.

  Currently there is a community of developers very involved in the game, even with it's player-base down. However, while much can be done as it is, many changes to the game requires things such as to modify the main .exe of the game, goes against the General conditions and so possibly illegal. However, Microsoft has not taken action against such a thing. The only real penalty the Freelancer community met in his history of editing has been a debacle involving a modification on the Halo theme.

  So while Microsoft has essentially removed the bulk of its support for the game, he also did nothing to stop his change, something that many are grateful.

  Ultimately, however, there are many parts of the game that most wish could be changed, but can never be the nature 'hard-coded' of such a thing, where the key to change he is locked up somewhere that we either do not have the knowledge and the ability to get to.

  There has been a lot of requests for the Source Code of Freelancer, but none have materialized. I understand that this is due to a policy that it does not give the source of his games or that the questions should be directed to the developer instead maybe Microsoft. The latter is impossible because the developer was bought by Microsoft, and subsequently dissolved.

  Ultimately the question I would ask is:

  What are the reasons for not releasing the source code of Freelancer, when he happened to so many other games such as Freespace 2?

  Linkus, your name looks familiar discovery gaming community (http://www.discoverygc.com)

  ... I must comment on your closing above statement...:

  "The end is the question I want to ask: .

  What are the reasons for not releasing the source code of Freelancer, when he happened to so many other games such as Freespace 2? »

  This is incorrect, as Freespace 2 has * nothing * to do with Microsoft, it was developed by Volition, Inc. and published by Interplay.

  These companies are not divisions of Microsoft.

  A better final statement would be asked about their release the Source codes of the franchisees Mech Commander, MechWarrior and Mech assault.

  The Battletech Franchise was a substantially larger intellectual property; and yet, they released their grip on it.

  (Although FASA / Weisman have reformed as Smith and Tinker, teaming with Piranha to do a full restart of the MechWarrior series, apparently the first deadline this year.)

  Who would actually have weight in an argument as to why they won't leave a much smaller intellectual property to the modding community.

• Is it possible to dynamically change the src media?

  .. .use javascript?

  The idea is to have a player and a few thumbnails to play various media, when you click on the thumbnail the strobe change src and play the media.

  Is this possible?

  Thanks in advance

  Mr. Anderson Gaspar

  Yes, with him soon be released version 1.5 of Strobe Media Playback you can do this.

  Take a look at the source code of the any of these samples:

  http://OSMF.org/dev/1.5.RC1/jsdemo.html

  http://OSMF.org/dev/1.5.RC1/jQuery-custom-chrome.html

  The two samples contain a list of 'points' under the player that will change the CBC media dynamically.

  As you will see we are still at the experimental stage with different approaches for our JavaScript API - is likely to evolve in future versions.

  -Andrian

• Using Sansung S3, not yet possible to share all the tabs opened (using NFC) with another phone NFC. But only the a main tab, I'm currently browsing is possible.

  Sansung S3 using, Android 4.1.2 Firefox 24.0; not yet possible to share all the tabs opened (using NFC) with another phone NFC. But only the a main tab, I'm currently browsing is possible to share. It is the function of current NFC function of Firefox?
  If so, when will it feature to share all the tabs?
  Thank you.

  I don't know if we implement this. Sharing of all the tabs you have open have many security and privacy issues. Someone forget that they had a tab open, they didn't want to share or miss-clicks on the sharing of all the option.

  We are looking for ways to better share tabs with devices that are located nearby. Especially if they are on the same WiFi network.

• Link to the source code for the module does not

  I followed this link: https://addons.mozilla.org/en-US/firefox/addon/sabnzbdfox/?src=search (with download of the source) and got a '404 error' (https://addons.mozilla.org/en-US/firefox/files/browse/76042/)

  Find the source code in another place, and when I do, how I update the broken link?

  Hello

  You can also try after some time. To search for possible temporary network problems please see: http://status.mozilla.com/

  Also, if the problem persists, try the link in a new profile.

  Profiles Howto

• How can I see the source code of a html page?

  In previous versions, it was possible to read the source code on an html page in the "View" menu It is no longer there. How to read code now?

  Use one of them:

  • Firefox > Web Developer > Page Source
  • Tools > Web Developer > Source of the Page (Ctrl + U)
  • Right-click on a web page to open the shortcut menu and select the Source of the Page

• Looking for the link to download HDD Recovery for Satellite L630

  Hi all

  I'm looking for the DOWNLOAD LINK of recovery of HARD drive to my new Toshiba L630 laptop.
  I read in several positions and the manuals it should be already on my hard drive.
  But this isn't on my hard drive, where it is connected with the restoration of the system, I even created a system restore disk, but there is no trace of any disk HARD Recovery Utility.

  This is the list of files create

  # Created on 2011-03-15 04:00 with Lister directory v0.9

  Name size Date time Attr

  e:\ (1) 175 703 783 -----

  2011-03-12 16:27 r-
  2011-03-12 16:27 r-
  Bootmgr 383 562 2011-03-12 16:27 r -.

  e:\boot\ (3) 3 433 472 2011-03-12 16:27 r -.

  BCD 262 144 2011-03-12 16:27 r -.
  BootFix.bin 1 024 2011-03-12 16:27 r -.
  Boot.SDI 3 170 304 2011-03-12 16:27 r -.

  e:\sources\ (1) 171 886 749 2011-03-12 16:27 r-
  Boot.wim 171 886 749 2011 - 03 - 12 16:27 r -.

  Hello

  HARD drive recovery can not be downloaded.
  You can not download the recovery disc as well.

  Generally, recovery disc HARD must be available on your laptop and you should be able to start this pressing F8 at the beginning of the initialization.
  Simply said: turn on the device, press F8 immediately after the laptop was turned on maybe you will have to press F8 several times in the line
  Then choose fix my computer and then you should see the drive HARD recovery option.

  If this is not available (no matter why), then you must create a recovery disc using called Recovery disk Creator tool that must be preinstalled on the laptop.

  If you are not able to create the recovery disk then you can order it from here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite L670 - looking on the screen BRIGHTNESS and volume display

  Hello. I have a Satellite L670 and I m looking for the on-screen display of the volume and BRIGHTNESS.

  It is the first of my laptop which seems to offer not to display these key elements and it is very sinuous to find the standard 3 + 4 for the volume keys and F6 + F7 for brightness, especially in an environment dark.

  Before this Toishiba had a few DELL Latitude and Inspiron Laptops and my wife uses a Samsung and had all this laptop-screen computers or the possibility of opening the display of the volume on fn + arrow keys.

  Please excuse my English. Maybe someone can understand my problem anyway ;-)

  CU, Sascha

  Hello

  What you want to say no to the display screen?

  Different laptops have different combination of FN keys. On Toshiba laptops, you can change the display by pressing FN + F6/F7 and on other laptops, you have other F - keys for this. There is no standard for these FN keys.

  Usually, if you press the FN key only you should see at the top of the screen flash cards. You see them?

• Legacy with defective power supply unit. Looking for replacement source

  RND4000 (ReadyNAS NV + v1 [v3]) group legacy with a power failure. Looking for replacement source. Not after replacement free of charge since it is obviously out of warranty and end of product life. However, it is a little expensive Kit to replace. If I did, I would still want to use it as a backup of synchronization for the new.

  I was unable to find any power supply corresponding by the name given to the unit (ST-220FUB-05F), all the results of my research resulted in a power different with smilar looks and namesake. Main differences are slight changes in the output rails, different output connectors. Also include a fan that mine didn't, perhaps a clue to the failure there.

  I was shocked to find that he was / is none replaceable fuse in the power supply and if there was a gauge commonent that he was unable to do the job because a cracket big mosfet to clean his radiator, think that's what it is, hard to see in here. Unable to find a replacement, I'll have to try to replace the component that is visibly damaged. Not easy because it's crowded in there and may fail because there are perhaps other failing components that didn't explode or evacuate. I really need ot get this unit backup and running.

  Help, please. Consider the purchase of an equivalent of second hand RND4000 for parts. See you soon.

  Hello EkDor,

  This replacement of power supply was free until supplies last and I heard they already ran out of it.