Is it possible to refer to an item and its properties in a variable?

I have two custom components. Only always displays the value of currentState.

<componants:wrUnapproved 
    itemCreationPolicy="immediate" 
    excludeFrom="SQLSERVER"
    id="wrUnapprovedComp" 
    wrIdLv="{parentApplication.wrId}" 
    userTypeCdLv="{parentApplication.userTypeCd}"
    width="100%" 
    height="354" 
    y="25"/>
   
   <componants:wrUnapprovedSqlServer
    itemCreationPolicy="immediate" 
    includeIn="SQLSERVER"
    id="wrUnapprovedCompSs" 
    wrIdLv="{parentApplication.wrId}" 
    userTypeCdLv="{parentApplication.userTypeCd}"
    width="100%" 
    height="354" 
    y="25"/>

Now I want to refrence that being active and reference it dynamically

myComponanet.init ();

where myComponanet is wrUnapprovedComp or wrUnapprovedCompSs

Found my own answer

var pp:Object = wrUnapprovedComp;

Tags: Flex

Similar Questions

Looking for table that contains line_id SB between promotional item and its elements of Get

Hello!
I'm looking for the table that contains the s.o. row between the advertising object and its elements Get ID after the modifier is applied to a sales order. In fact, I'm looking for a table that will show me that s.o. line_id _ is the promotional item and l.o. line_id _, _, _ are the elements of Get.
Thanks in advance

OE_PRICE_ADJUSTMENTS and OE_PRICE_ADJ_ASSOCS are the tables you are looking for.

Thank you.

Is it possible to see if any items are in a basket?

Hi all
Is it possible to see if the items have been added to a cart and purchased not or if there are topics that are sitting in a basket?
Any help would be great.
Thank you
Tom Kelly

Hi Tom

You can define a custom report to see what product was dropped and when.

Custom reports - add an e-commerce report - report Type: products

Set the filter: equal status to the abandonment and run reports

Kind regards

Silviu

What is the difference btw: block.item and $item.block.item.value in State of form customization

Hello
What is the difference btw: block.item and $item.block.item.value in the customization of the form State section
I've seen this condition as
triggering event
the point at which instance
: PRESS RELEASE. PICKING_RULE not in the ('US_CB_1', 'US_CC_1', 'US_CA_1', 'US_CU_1')
and
When the point instacne
${item.release.picking_rule.value} not in ('US_CB_1', 'US_CC_1', 'US_CA_1', 'US_CU_1')
the two are the same or different
Thanks in advance

In the particular example that you use, no difference, you are getting the value and comparing it with a set of values.

The second form of the syntax, however, take into account what follows, while the first only retrieves the value of the field:

Conditions can refer to properties of objects using a SPEL (simplest Possible Expression Language) syntax. For example, allows you to create a Condition that tests whether a field is displayed or not. These expressions take the following general form:

${objectType.objectName.Property}

Internally, the expression of SPEL is a cover for Oracle Forms builtins like GET_ITEM_PROPERTY, GET_BLOCK_PROPERTY, etc. In addition, expressions of SPEL are supported recovery values of profile, the dictionary of text messages and local Variables (described later).

Error: Check the location of the item and try again - when you try to delete a file

__Deleting a file?
I downloaded a video file in a folder. The folder contains the name of the file, the size, but under type said: file. When I try to delete the file I get a error message "point is more in C:\...\vids. Check the location of the item and try again. How can I delete this file?

Hello

Start in safe mode and then try to delete the file from there.

Refer to this link and follow the instructions to start the computer in safe mode:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think.

is it possible to redown load from microsoft and use my original key to validate thnx paul t instead of the original operating system was 32 x 64 bit

I loaded Windows 8, which was not working properly could not recover my windows 7 has requested a second reinstall windows 7 again, but it installs only 32 bits instead of the original operating system was 32 x 64 bit is possible to redown load from microsoft and use my original key to validate thnx paul

Redownload or resume

Method 1:

When you buy Windows 8 an email with the download link and purchase details will be sent to your email address that you use to purchase / register your product, you can simply access email and use the download in link to the re - download to your computer.

Method 2:

Here are the links that will help you to download Windows 8.

Note: Please refer to option 4 in the first link below and download the correct version of second link and use the product key of windows 8.

http://Windows.Microsoft.com/en-GB/Windows-8/buy-Windows-8-online-FAQ

http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

Hope this will help you. Please do not hesitate to meet any other assistance and we will be more than happy to help you.

Magic Wand tool selects several items and won't let me not deselect everything I don't want

I was with the SHIFT key to select multiple items, and all of a sudden Photoshop cc is not let me clear ALL.
I don't even have to press the SHIFT key now selects automatically no matter what I click.
The items that are currently selected are not the same colors so I know that this isn't just misunderstanding on these items as I want.
Is it possible that I accidentally changed something where it is set to nothing I click on select automatically?
Why now when I try to disable whatever it is, is not it? I can click on a specific item, select it, then click the exact the same task and it will not deselect.
Help, please! A bit new, but I was easily using the magic wand to select the text and fill with "content-aware" but now even when I fill, he left this section and then selected me will not deselect this period.

The reset tool:

Create an item and submit to the invoice
Hi all

I am studying how can I have the price for an item and so that each item that I would appear on an invoice. Can someone tell me if this is possible?
What I want to do:
In the form "Request for Service", I have to be able to go to the form of "Debriefing" and create a line for a type of "hardware".
Then in the 'Charges' Panel I need to show a price previously defined by the point (and not according to the price list).
In conclusion, allow me to introduce and it should appear on the invoice.

What I have so far:
I went to the shape of the elements of the template and created a billable test element, billing, type 'Material' and defined a cost (maybe I'm confused with the price cost?).
Back in the "Request for Service" form, I'm able to go to the form of "Debriefing" and choose this item. But now I have 2 problems.
1. If I try to submit it, then it is said that "no charges are eligible to submit to OM" (but if I create another as the use of another test with type = "Work" and create on the "Charges / action panel" - not through the button "Debriefing" - I have no problem).
2. and I want to show the price per article, not per "price list".

Don't know if that makes much sense, and as you can see I am very new on this...
I read the pdf Guide and try to do this for some time, but every time I think I'm close, another problem pops up...
Thus, any help will be gladly appreciated.

Thank you
Ana
1. for the material service activity, I hope you have category of configuration as a command line and billing types and OM Order and types of lines are configured in this specific control unit where you try to submit your order.
2. don't you update the status of the assignment of task as completed? If this isn't the case, the type of charge line will be In Process and not real. Be sure to complete the task and automatic assignment to produce again. This time, you should see the nature line as real charge.

Thank you
Claire

I don't have a 2nd computer. Is it possible to migrate an external backup, and then on a new drive hard mac?

I don't have a 2nd computer. Is it possible to migrate an external backup, and then on a new drive hard mac?

Use Time Machine or a clone to copy to the outside.

Time Machine Basics

Basics of Time Machine (2)

Time Machine Basics (video)

Time Machine FAQ

First Time Machine backup

Clone - Carbon Copy clone (Often recommended because it has more features than others)

Clone-data backup

Clone-Deja Vu

Clone - SuperDuper

Clone - Synk

Clone - 6 tested Applications Software

Time Machine from the Clones and Archives

Commonly used backup methods

Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

Best regards

Q

Hello

It may help to place your watch in mode do not disturb before driving:

-On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

-On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

https://www.Apple.com/feedback/watch.html

(This is a supportive community focused on user - you don't talk to Apple here).

Satellite Pro M70-113: not possible to write on CD - R and DVD-R

Hello

I have a Toshiba satellite pro m70-113 laptop.
Playback problems:
I'm unable to read cd - r. It's really strange that a few days earlier these CD - R have been reading very well on my drive.
and when I click on the cd drive in my computer, an error dialog box shows and says f: is not accessible, incorrect function. Here's a screenshot of the error... :
http://img64.imageshack.us/img64/9574/1bp3.jpg

And when I try to read my DVD-R, a few times they read very well but sometimes it does not read and the drive LED is lit when it does not read the dvd - r.
When it reads the DVD-R, the following error message comes: screenshot here: http://img172.imageshack.us/img172/9674/2bc0.jpg

Write problems:
After getting reading problems, I tried to test my drive writable.
And I found that I'm unable to write on cd - r. I used alcohol and Nero once but without success.

Although the same content when it is burned to cd - rw, it is a success.
I am able to burn successfully on a support DVD + RW 4 x with data amounting to close to 4.34 GB for DVD5...
When I insert a DVD - R Virgin car doesn t detects it as a blank media and the keps LED on lighting constantly and if nero State doesn't detect my DVD even! I'm not able to write on my DVD-R media...

In short: write to RWs is possible for both cd - r and dvd + RW not possible of writing on CD - R and DVD-R.

Please help me.
It is only 7 months since I bought this laptop and believe that there may be no other person on this planet who looks after the training better than me!
Really, I have not much used this drive and never scratched/gradient/local support, only the Supermedium media inserted.

Thank you

Hello

Well, based on your description it sounds like the drive cannot calibrate the lens and, therefore, it of not possible to read or write to these media.
Usual it of not possible to fix this and the replacement drive is necessary.

You can also consult the user manual. You will find a list with all supported and compatible media.

I also found this topic in the forum:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13170&MessageID=48243

Is it possible to hear a Bluetooth speaker and the internal speakers at the same time on the iMac with OSX 10.11.2?

Is it possible to hear a Bluetooth speaker and the internal speakers at the same time on the iMac with OSX 10.11.2?
I can only have my Bluetooth speaker on or my internal speakers on my outings Sound System Preferences.
Is it possible to have both of them at the same time?
Thank you for your patient

To my knowledge, no.

Barry

How many people currently work at apple (by country, if possible), I write a business report and need to know the answer, thank you.

How many people currently work at apple (by country, if possible), I write a business report and need to know the answer, thank you.

Watch their deposits of the company. This community is to post technical questions.

We are users like you. We are not Apple. If you wish to contact Apple use the link contact us at the bottom of this page.

Is it possible to access the USB ports and a slot for card SDX?

Is it possible to access the USB ports and a slot for SDX card at the back of the iMac?

Rotate the iMac autour to see ports.

Does anyone know if WIDI is possible on the Yoga 2 13 and ideapad flex 14?

Does anyone know if WIDI is possible on the Yoga 2 13 and ideapad flex 14?

RichardTheKing wrote:
Does anyone know if WIDI is possible on the Yoga 2 13 and ideapad flex 14?

It is possible if you have an Intel 7260 card.

Signle of N strips, double N band and versions (sorry) AC WiDi support.

Is it possible to refer to an item and its properties in a variable?

Similar Questions

Maybe you are looking for