Is it possible to access the USB ports and a slot for card SDX?

Similar Questions

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!

• How to disable the USB port and change DVD drive to read-only?

  I have upgraded my Vista Home Premium from window to window 7 Ultimatum. I tried to disable the USB port and and change the configuration of DVD room to read only via the bios, but I wasn't able to do. The bios always the same, whether it was when I had vista.

  I wonder if the operating system upgrade from Vista home premium to Windows 7 ultimate trigger necessarily upgrading the bios in order to take full advantage of the Windows 7?

  Thank you

  * original title - upgrade from Vista home premium to Windows 7 ultimate necessarily triggers upgrading the bios in order to take full advantage of window 7? *

  rThen your question isn't specific to Windows 7, you must consult the manufacturer. You should be able to disable the USB via the BIOS ports. Also, why do you want to set the optical drive as read only? If it is shared? If so, the advanced sharing disk properties, from there, you can set permissions on the drive. If you releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• the usb ports and DVD drive on my laptop of ts 17 want does not work correctly.

  My laptop dvd player cannot read software, flash drives and card readers and other usb devices d0esn ' t work correctly when inserted into the usb ports. I opened the Device Manager and noticed that the uj8c2 of ram dvd has a yellow triangle below. I clicked it and the State of the device as follows: WINDOWS cannot CE HARDWARE NOT CHARGE THE DEVICE. THE DRIVER MAY BE CORRUPTED OR MISSING. (code 39). the error status was ox x %. Today, I downloaded technical assistance from hp and when he ran a check on the system, it recommended two options for downloading 1. HP NOTEBOOK SYSTEM BIOS UPDATE (processors intel). 2 HP PC HARDWARE DIAGNOSIS UEF. I tried to download but were not available. I don't know if this problem can be corrected by the Manager of recovery so please let someone help out me. This month will be the third month, since it was purchased. Thank you in advance for your answers.

  Hello:

  For the DVD player, please try troubleshooting step 3 on the link below.

  http://support.Microsoft.com/kb/314060

• The USB ports and keyboard randomly not working no-error 43

  Hi all

  I tried intermittently in recent days to resolve a really annoying error 43. I was able to glean
  of the various forums that problems similar to mine are most often took place and various folk remedies
  appear to be available, but none of them have worked for me.

  Here's what happens: apparently at random, my usb ports and a keyboard stop working. It's especially annoying
  because I have a usb mouse, when this error occurs, I'm so completely powerless to do anything.
  I got around it sometimes by plugging my mouse into a different usb port (my computer a lot). That's how
  I found that I was getting code 43 error, "this device has been stopped because he reported the problems." (do not remember
  the exact wording).

  This started happening a few days ago, I've never had any problems like this before. I also tried other usb devices
  in the port - nothing works when the error occurs. Curiously, the error sometimes stops just as randomly
  as it begins. Sometimes some ports work and others - sometimes, I can't use my keyboard, but not my mouse and
  Vice versa.

  Here are the remedies I've tried:
  1. Uninstall and then reinstall the drivers for the USB controllers, mouse and keyboard
  2. performance of FixIt for hardware and drivers
  3 let the computer unplugged for a while, then returning to it (it helps temporarily, but the error still recurs)

  Sometimes, I heard that you may need to update your BIOS. I already have the latest version of.
  If someone needs more information, let me know.

  Alright! That's all. I hope someone can help me, that would be a really stupid handicap for my computer to have otherwise.

  Update the latest drivers windows 7 compatible chipset and motherboard manufacturer's Web site.

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  If the problem continues, I fear that you may need to replace the USB hub.

• my system does not know the USB ports and the camera, win 7 x 64, asus k53z

  Thank you

  Hello

  1. are you not able to connect the device via the USB ports?

  2. What is the brand and model of the camera?

  Please provide us with more information on the issue, you face to help you.

  You can visit the link of the article of Microsoft that will guide you on how to ask questions below.

  Suggestions for a question on the help forums
  http://support.Microsoft.com/kb/555375

  You can run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/

• Portege R100 - question about the installation of the USB port and Windows problems

  Hello

  I just bought a used Portege R100, but I have some problems. Of course the laptop isn't a CD or DVD, player so I tried an external DVD drive, but it did not work. What kind of device I have to install Windows (not an edition of recovery or anything like that, but a whole new windows on the formatted HARD drive)?

  I also have another problem: whenever I plug a USB device (I tried the DVD drive external and a USB keyboard) when I start the laptop, it seems to hang. At least, I am not able to type anything more; the keyboard of the laptop is dead (the point where the entrance would still be flashing in the BACK platform, but typing. sth on the keyboard isn't doing anything). It is not normal, is it?

  I also tried to get to the BIOS, but I tried various commands (F1 to F12, DEL etc.), but I couldn't access the BIOS. It would be great if someone could tell me the command for it.

  Thanks in advance for the help and sorry for the bad English, I'm not a native speaker :)

  The forum has a search function, but to help you look still these 2 wires:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23921

  Here you can see that XP installation isn't very easy, but can be done successfully

  as long as you are working in an environment with appropriate back-drivers back, you can use any kind of external (USB or pcmcia) CD player you want

  the bios is accessible by pressing ESC and the Start button

• My PC detects that my Kingston card reader into the USB port but wont read SD card - why?

  Several ports USB in my PC w/Windows XP see all my USB key and can read the data, but while "type" my Kingston card reader 4ports are recognized, it will not read the SD card. Why?

  You should have installed service pack 3, a long time ago, but this probably isn't the cause of your immediate problem.  Until the last part of your response, I would say that you need to get a new card reader.  However, if the card reader works on another computer, something seems to be the issue.

  What is the model of your Kingston card reader? It should appear on the label.

  With the drive connected to a USB port, open the Device Manager (start > run > devmgmt.msc > OK).

  Normally, you should see a number of entries in the category 'Disks' for the number of different locations in the card reader.  They probably will be named something like, "Kingston USB 2 HS-CF USB Device" and similar.  It should also have an entry in the "De Bus USB controllers" category that says "USB Mass Storage Device".

  Check all the entries above.  If none of them display a warning icon (exclamation), double-click the entry and to report to what appears in "Device status" and "use of the device.

  Right click on each of the entries corresponding to the card reader (i.e. one for each location in the hard drives category card reader and an in the category USB controllers USB mass storage device) and select uninstall.  After all, entries have been uninstalled, disconnect the player from the computer card and restart.  Now reconnect the card reader.  Windows should recognize and install it automatically.

  NOTE: If you have a hard drive connected by USB, you must be careful that you uninstall the correct USB mass storage device.  The safest way to do this is to use the "Remove hardware safely" to stop your external drive and then disconnect it from the computer.  At this point, its entry will be removed from the Device Manager.

  If the procedure above does not read your card before the card reader, I am ideas.

• How to read the data in a device connected to the usb port

  Is there a class or object, or the piece of code in Java that is comparable to the PDQComm32.ocx and the mscomm32.ocx used in VB6? I need to know how to read the data of a device plugged into the usb port of the BBerry. Is it possible to use the BB to read data from a device via a usb cable?

  I'm new in Java and I'm looking for the opportunity to write a project to read the data in a device with this program that can turn on a BB instead of on a pc.

  Thank you

  Did you watch net.rim.device.api.system.USBPort?

  That's what the doc says:

  Provides access to the USB port of the device.

  Avoid using this class in applications, as it is not portable. On the contrary, if you need to access the USB port, use factory CLDC Connector to serve a connection.

  Rab

• Cannot access the USB storage

  I had an E3200 for over a year and all is well. I have a 128G USB plugged into the usb port and had no problem sharing the content with any user connected to the router. In the last 2 days I started to have access to the USB problem. When my WIN8.1 came, I saw notification saying: "unable to cnnect to all network drives" and I can't go to the USB. The other function of the router is fine (each user can access the internet without problem). I tried to check using the administration interface. But 192.168.1.1 has not returned the admin login (via IE or Chrome).

  I put off and then power on the router, I can only get to the admin and saw no problem with the USB Stoarage and I was also able to get the USB content on my file Explorer.  It remained OK when I was using my laptop (maybe 1 or 2 hours). But the next time I turn on my laptop, I had the problem once again (impossible to get to the USB drive and 192.168.1,1 are not returns login prompt).  Power off and power on the E3200 will do again. Any suggestions on how I can know what is the problem?

  To help us isolate the situation, try to access your files using other laptops. If all devices are affected, it would be better if check you if the firmware is up to date. If this is the case, you can try to re-flashing the firmware.

  To download the updated instructions and the latest firmware, go to this link, http://support.linksys.com/en-apac/support/routers/E3200.

  It is recommended to do a factory reset after properly updating the firmware. Reconfigure the router and observe its performance.

• Satellite P10 crashes when using the USB port

  Hi all

  I used my Toshiba 1 year without problem. Recently, I have a problem with my USB port. As sson as I have insert any USB device. The system hangs / crashes(I have to swith it off using the power switch to reboot w/o the usb device).

  I have removed/uninstalled drivers and rebooted. The laptop recognizes the usb ports and charging drivers, but whenever I insert any USB device, the system freezes again.

  Any advice will be appreciated.

  Kind regards
  Richard

  Hello Richard

  It will be interesting to know what devices you connect to the USB ports and devices has own power supply.

  It's really not easy to say what is happening here. Perhaps some device needs a little longer to be recognized. Please let us know what devices you use.

• lose the usb port when restarting

  My laptop suddenly lost all the USB ports. I can uninstall the USB hubs and restart and Windows will load the drivers and recognize the USB ports and any connected equipment. Everything will work as usuall until I reboot then have all usb ports stop working. I've updated my Bios and latest drivers available from the manufacturer (Dell), I am running XP home and that you have installed all updates.

  Hi Zmanomore,

  ·         You also update the chipset drivers?

  Method 1: Check if the chipset drivers update is available. If so, the same day and check for the issue.

  Method 2: You can try running the fixit in the following article and see if it helps.

  USB port may stop working after you remove or insert a USB device

• Is it possible to redirect the LPT1: port to a usb port

  I have an old recipe BACK with tons of revenue program, as I walked. I so far have been able to use it and can still access the program and files, but he wants me to print to LPT1:. No problem until my older printers crapped out. Is it possible to redirect the LPT1: port to a network printer or the usb port.

  How to print from a program of 'BACK' in XP--> http://members.shaw.ca/bsanders/printfromdos.htm

• 32AV933G: is it possible to access the image user mode play movies on USB

  Hello!

  Recently, I bought a 32AV933G, based on the features and was very surprised by the good image quality.

  My question: is it possible to access the image of the user mode when playing movies media player USB?
  I can't get the preset Standard, mild, film... I can't even the Menu to adjust the settings.

  I guess that's how TV has been designed. You can change this in the next Toshiba Firmware? Please, I beg you!
  Also add some features before etc, Play/Pause, the remote control.
  Perhaps using coloured Teletext keys. Just a suggestion.

  If anyone can help with this, thank you!

  > My question: is it possible to access the image of the user mode when playing movies media player USB?

  I didn t find all the details about this in the user manual.
  So I guess that's not possible.

• Equium A60: is it possible to boot from the USB port?

  Hello

  I have an EQUIUM A60 with BIOS Version 1.90 is possible for a start of the USB port using an instead of a floppy mass storage device if yes how?

  Hello

  You can boot from the USB ports with a floppy drive floppy drive. You cannot boot from USB HDD or USB
  Boot devices: HDD, ODD, LAN, USB - FDD