Error: Check the location of the item and try again - when you try to delete a file

Similar Questions

• Solutions error checking the disk and Restore Point, pointing to the other.

  Yesterday, my wife picked up the package of virus Security Suite from somewhere and remove, I picked up an error when the disk check runs at startup. Check disk claims it is an error, check the drive and suggests restore since my last restore point. But when I do this, restore the system claims I have a disk error and I need to run the disk check. Which brings me right to the beginning of this problem.

  I'm running 32-bit Windows 7 Home Premium, and have enabled the Windows updates. I use AVG and Malware Bytes to protect my system.

  Thank you!

  Bill Haworth

  You can run check disk from safe mode? This is a level of command prompt:
   
  CHKDSK x: /F /R
   
  Where x: is the drive that you control.
   
  "bill_haworth" wrote in message news: 9c836e2b-b164-44a7-b516-5d5302cca9bf...
  > Yesterday, my wife picked up the package of Security Suite virus from
  > somewhere and back, I picked up an error when running the disk check to
  > start. Check the disk says there is an error, check the drive and
  > suggests restore since my last restore point. But when I do
  >, System Restore claims I have a disk error and I need to run
  > Check the disc. Which brings me right to the beginning of this problem.
  >
  > I am running 32-bit Windows 7 Home Premium, and made Windows updates
  > on. I use AVG and Malware Bytes to protect my system.
  >
  >
  >
  > Thank you!
  >
  > Bill Haworth
  >
   
   

• External BB10 Webworks/Cordova opening HTML pages on the device: "this file is not found. Check the URL and try again. »

  Hello fellow people,.

  IM quite in my application of Cordova/Webworks which downloads and save an html file in the SD (blackberry.io.sharedFolder).

  At this point, the config.xml file is defined as:

  read_device_identifying_informationermit >

  access_sharedermit >

  ermissions >

  Now, I'm trying to open the downloaded html that is saved to file:

  /Accounts/1000/removable/SDCard/MainFolder/subfolder/file.html

  My webapp, I try to open as: window.open (path, _self);

  Where path is the file above (which exists on the device!)

  Path is also, with the blackberry.io.SharedFolder + "/ MainFolder/SubFolder/file.html".< of="" that="">

  Also, I get the error:

  This file is not found. Check the URL and try again. If the URL is correct, check that your card is correctly inserted on your device.

  I am running and development off the BB10 Simulator.

  The console does not throw any error that I see.

  Any help or advice would be appreciated.

  See you soon,.

  @varunasingh

  Well, this is awkward.

  I have myself fixed by adding the string: "file://" on my road.

  I hope that others see it until they are too uptight.

  This has been resolved. Thanks for reading.

• How to clear the cache and page reset when you click on tab

  Hello
  I use two level model tab and its Apex 40.
  I would like to clear the cache and reset pagination when you click level 2nd tab
  Is anyway to do this?
  Thank you.

  hlthanh wrote:
  Hello
  I use two level model tab and its Apex 40.
  I would like to clear the cache and reset pagination when you click level 2nd tab
  Is anyway to do this?

  Can stick us to the standard terminology of APEX: do you mean Parent (level 2) tab or the tab Standard (level 2)?

  Parent tabs this is done directly using the box Erase the Cache property and reset pagination for this page of the tab target.

  For the Standard tabs, create processes from before header tab target:

• Session state > clear Cache...

• Reset the Pagination

• Adobe PDF opens the dialog box "Save as" when you simply save an existing file

  Any time I hit "Ctrl + S", or go to "File - save" when you are working on an existing file, it opens the dialog window "save under. And that is not enough, the window "save under" is this new version which adds an extra step (because he wants to know if I also want to save the file in the cloud) and makes me also navigate the current folder and when I hit save it also opens another dialog asking me if I really want to replace the current file... How heavy one set of steps just to save a file that you opened to make a little change - we do not save money, just save.

  Please, can someone fix this? I think he was born in the current version, the last, so it could probably be a bug (the 'Save' option is set by mistake the method "save under") or a poor handlebars by developers.

  Adobe staff has tried to help me, asking me to "Run as Administrator". This does not solve the problem, and my post has since been ignored...

  Any help would be apprciated. Thank you

  Problem addressed and solved on this post:

  Re: Why Adobe PDF opens the dialog box "Save as" when you simply save a file

• Error "this element is not found. It is no longer in E:... Check the location of the item and try again.

  I got this message after copying and pasting files from my external hard drive to my pc (windows 8), while some files were not able to be pasted. I pressed on the "try again button", still the same problem happened.

  I doubt it should not have any corruption with my files (jpg, Word document) because I could open it directly from my external hard drive and I also joined one of the 'problem' files to my email and download it from there, to my pc. It has worked well.
  I need a solution ASAP pls.

  I had this problem with a file in Windows 8. Here's how I solved it.

  The file that has not been answered was in C:/Users/username/Downloads. So I open the command prompt and typing the following:

  CD downloads

  dir/x

  [list of files and personal records, along with each receiving a short name, in the case of my file is FILE ~ 1]

  del FILE ~ 1

  .. ... who did it. Apparently, some have had more success when you rename the file:

  Ren FILE ~ 1 newname
  newname del

• When you send an email with a small attachment, you receive an error "qq 4.3.0 # Please check the message and send again.» I can't send the message

  When you try to send an e-mail with an attachment small, I get the error message #4.3.0 qq and the message fails.

  POP or IMAP e-mail account?
  What version of Thunderbird?

  First try this just in case this issue a "sent" folder. Right click on the "Sent" folder and choose 'Properties' and then click 'Repair file', click OK.
  Close and reopen Thunderbird.
  This will ensure that indexing is correct.

  Try archiving of e-mail messages in the "sent" folder (Ctrl + A will highlight all the sent emails and display them as conversation - click on the button 'Archive') then right click on the "sent" folder and choose Compact.

  This will get all the old emails in a file Archive and compact will remove all traces of old deleted sent mail freeing space.

  It could also be a problem at the server end.

• I get "HTTP 400 error. The request is malformed. "When you try to access a URL that I consulted earlier in the day and works OK with IE.

  Hello
  I accessed the site earlier in the day, but when I came back to it I got the above message. Tried to access the site in IE and all worked well. Tried to disable DNS prefetch and erase history, but nothing helped. I did a virus scan but no threat detected.

  This problem may be caused by corrupted cookies.

  • http://KB.mozillazine.org/cookies

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• check the trigger quantity - at hand when you insert the order quantity

  Jin
  I have problem with trigger, I use the OE schema
  I have the form master / detail for orders and Order Details, that I need when I insert the order quantity to check the quantity available for each product using the trigger
  I use oracle 10g developer
  any help would be appreciated
  Thank you very much

  2MEO wrote:

  Bamba says:
  What is the structure of your database? and this code that you write?

  don't tell that you don't know how write the SQL query :)

  Thank you for your quick response
  I can write the SQL query
  I use these lines:

  SELECT quantity_on_hand
  INVENTORIES
  WHERE Product_ID =: Product_ID;
  IF: quantity > Quantity_on_hand THEN
  MESSAGE ("the inventory is not enough");
  END IF;

  Why do you think I can't write same SQL query?
  Thank you Bailey

  The query is bad :) there is no INTO clause

  Write it on quantity WHEN-VALIDATE-ITEM and KEY-NEXT-ITEM

   declare
     vquantity number;
  begin
   SELECT quantity_on_hand
    into vquantity
    FROM INVENTORIES
   WHERE Product_ID = :Product_ID;
  
   IF :quantity > vquantity THEN
      MESSAGE ('the inventory is not enough');
       raise form_trigger_failure;
   else
      null; -- or next_item if you are using KEY NEXT ITEM trigger
   END IF;
  
  Exception when no_data_found then
    message('Invalid product ID');
   raise form_trigger_failure;
  END;
  

• in the past, you could close firefox, but he recalled the pages or tabs you had open and open again when you started upward. Is it still possible today?

  In the past, you had several ways to close Firefox. Just close it with the loss of the page, or close, but remembering the pages where you were, then they open again once you started Firefox later. Is it still possible?

  See also:

  • Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.

• Error "Setup.exe has encounter a problem and must close" when you uninstall a program.

  Original title: Unistalling a program (Remove)

  I want to uninstall a program but when I click on remove the following pop up messege appears (Setup.exe has encounter a problem and nneeds to close.) We are sorry for

  the inconvenience.
  -----------------------------------------------------------------------------------
  If you were in the middle of something, the information you were working

  at the risk of being lost.
  Please tell this problem to Microsoft.
  We have created an erroe reprt who can send us.
  We wiil treat this report as confidential and anonymous.)

  Can you tell me what I need to do? Because I sent error report and the problem persists.

  Hope your replay at the beginning to my email address: * email address is removed from the privacy *.

  Sincerely

  Armando Cortes Monge

  Hey Armando,.

  We will need details of the program you are trying to uninstall as said by Stefan to help you with the problem.

  Come to the error, here are two ways to fix.

  Method 1:

  Reinstall the program from the installation source, and then Uninstall it. This helped to eliminate many applications successfully.

  Method 2:

  Manually remove the program from the registry.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  After you back up the registry, follow these steps.

  (a) click Start and type regedit.

  (b) click on regedit.

  (c) in the registry editor, find the following registry key:

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall

  Each key listed under Uninstall in the left pane of Registry Editor represents a program that is displayed in the list of installed programs, programs and features.

  (d) to determine which program that represents each key, click the key and discovers the following values in the details on the right pane:

  DisplayName: Data of the value of the DisplayName key is the name listed in Add / Remove programs.

  - and -

  UninstallString: The value of the UninstallString key data the program used to uninstall the program.

  (e) after you identify the registry key that represents the program, right click on the key in the left pane of the registry editor window, and then click Remove.

  (f) click Yes in response to the message "are you sure you want to delete this key and all of its subkeys?

  (g) close the registry editor.

  See if that helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.
  (c) in the registry editor, find the following registry key:

• Hi I have a problem I have install creative element in the office, wen I want to open it say that message can't conect to the adobe servidors and check the firewall and try again, byt I already check the firewall and everything is perfect, I don't know wh

  

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• Error - "running the server has failed." When you click on video files

  original title; When I click on a video, instead of playing, he says "Server performance impossible."  What should I do?

  I click on a video and it says failed to execute on the server.  I tried to change the registry, but it did not help.  What should I do?

  Hey Eagle...

  You can try the solutions to these links...
  http://social.technet.Microsoft.com/forums/en/w7itpromedia/thread/f690ff23-C486-47e7-ACD4-ee6187613ae8
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/Windows-7-Media-Player-Server-execution-failed/ecc08c3b-D445-48C2-b07d-9df48500434f

• Cannot delete an empty folder on my desktop. "Unable to find this article. "This is no longer in c:\user... check the location of the item, and then try again.

  I copied an empty folder of google drive to my office, titled "writing". When I tried to remove it, it comes up with the error: "can't find this article. "This is no longer in c:\user... check the location of the item and try again. 

  The file is C:\Users\myname\Desktop\Written and it is empty

  
  

  I tried literally everything, reboot, restart in mode safe, cut and update, scan antivirus microsoft malware scan... and drive check came back normal.

  I've tried programs like unlocker and assassin leader, did not work

  I have search various forums and tried the old commands MSDOS, but he only says: System cannot find the specified item

  I tried to take over, but the Security tab simply says the requested security information are either unavailable or cannot be displayed.

  I can create a new folder on the desktop with the name exactly the same and the two would not exist, when I delete an old, I can't then delete again. When there are two "written" files, I can copy and create files and folders in two written records. The contents of the two files 'written' is identical at all times. When I remove one of the 'written' all the content remains in the non deleted "written", but they become inaccessible.

  It seems to me that file back to the original.

  The said general tab size = 0 size = 0 disk and it's just empty in fields created, modified and consultation:
  It's very strange, please help
  Shaun

  Hi Srimadhwa

  Thanks for the reply. Before I check for any response, I used ubuntu live cd to remove the offending unscrupulously folder.

  I really don't think it's anything to do with my windows account (although I didn't try the solution you suggested).

  During the copy process that something has been broken that created this file with the path, but no other property, I think that this "confused" windows and it wouldn't recognize that it exists.

• I am running XP and try to delete several RECORDS

  I'm on XP and try to delete several FILES but holding down the Ctrl key and highlighting the first and the last does not seem to work.  Any other ideas?

  To remove all the: select one and Ctrl + A will highlight all. -Delete.
   
  
  To delete a section: highlight the first one you want to remove. Scroll to last and click while holding down the SHIFT key. -Delete.
   
  
  To delete several messages that alternate: hold down the CTRL key while you click each message in order to highlight. -Delete.