is it possible to replace the wifi with another card?

Similar Questions

• Can satellite M70-159 - I replace the motherboard with another?

  Hello!
  The model of the M70-159-card mother K000033840 can replace another motherboard with a number K000033860?

  Thank you.

  I put t know if it s possible because I m not a technician for laptop.
  Normally, you should only replace the motherboard with the same.

  I put t know if it works. Contact a local ASP and ask for a technician. They know where the other is, and if it would work.

• If I replace the control with another why DAQmx create channel once complain a false claim?

  I tried to replace the frequency by another control in the example found here complete PWM:

  http://www.NI.com/white-paper/2991/en

  However, I get the following error message:

  

  Possible reasons:

  Requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.

  Property: CO. Pulse.Freq
  Required value: 0.000000
  Valid values begin with: 22.300000e - 309
  Valid values ending with: 20.0e6

  Channel name: Dev1/ctr0

  Task name: _unnamedTask<10>

  My wiring diagram looks like this:

  

  If I cancel my change (i.e. I have remove the frequency control knob and turn it over to the control of the example, it works perfectly.)  I get the waveform is displayed in the oscilloscope.

  My goal is to simply use a frequency and duty cycle control knob.  How can I achieve this?

  There are two things to do.

  What I think you did now changes the scale of the handle.

  You will also need to change the values that are allowed to enter. You will do on the data entry tab in the dialog button properti.

  Uncheck the 'use default', the Minimum value limits and Maximum identical to your balance.

  Value "Response to value out of range" Coerce to both Minimum and Maximum.

  I hope this helps.
  Let me know if you have more problems.

• Replace the library with another library item

  I created a new footer which is used as a component of the library throughout my site and I would like to replace the old library with the new item. I know that I could copy the code of the new element of the library in the former, but I would have preferred to keep the old file even. This kind of thing was easy in GoLive, is there a way to do this in DreamWeaver?

  more-simple
  the library folder of the files, right-click on the old .lbi Panel dw and
  Rename it to something like filename_old12 - 08.lbi
  Click on no to any update
  Then rename the exact file that former name did the new library item.
  -> Then dw menu edit-> library-> pages of updated items

  --
  Alan
  Adobe Community Expert, dreamweaver

  http://www.Adobe.com/communities/experts/

• Stream of 6537 s on the drive with another card as well.

  Hello, we are planning to have a platform that has 3 PXI 6537 s and another card for playback of a sync signal (North Atlantic Instruments 75 3). We capture cards PXI 10 MHz and the 3 75 between 10 and 20 Hz, regardless if we taste a bit faster than that, but we can't go much more slowly. We need to store the result in a known file format so we can analyze it later.

  From the example of reference for data streaming of double PCIe 6537 s example of disc (http://zone.ni.com/devzone/cda/epd/p/id/5315), it seems simple enough to add another PXI card.  We are OK with that.

  What is the best approach to take the card sync?

  Our first choice is so far:

  To read a value from the sync every time it happens around the loop of the producer; i.e. every 20ms. This will taste at 50 Hz, but that's OK. Store us the values in a table of fixed value size zero and push the table on the queue at the end of the case 'true '.  It's easy enough but... The 3 1 d Raw U32 DAQmx readings work quite quickly to allow the Syncro values to the queue, in the 20ms window? (We have operated there should be about 16 MB of data per card for each reading). If not, is it close enough that he could be twisted so that sync data can be queued as well?

  Our second is:

  We plan to read data in sync in a zero arbitrarily large array initilized, especially if we know the size when write us data to the file. This can be filled at 20 Hz, in what I'll call (or the love of argument) a producer of the second loop. We could protect access using semaphores. In the loop of consumption, we read the three blocks of data, then data sync; That is to say:

  • read three lots of the queue database
  • lock the semaphore
  • write the content of the table
  • zero the content of the table
  • unlock the semaphore

  Does anyone know of a decent/better way to do this?

  Are we on track?

  Thank you

  Jon.

  Hi Jon,

  Yes, I think that your hypothesis is correct.

• Is it possible to replace the hard drive with an SSD? or would it be too expensive?

  Is it possible to replace the hard drive with an SSD?

  or would it be too expensive?

  Yes.  There are several alternatives.  I found a way relatively inexpensive, using a map of mSATA (very small SSD) and an adapter to connect it to the connector IDE 44 pin internal of my PowerBook.  It works very well.  Rather than repeat what I posted previously, you can watch these two topics (which also has good info, other users)

  Re: This win to install a SSD drive in a PowerBook G4?

  Re: SSDS  (my post is halfway - "this is how I did with my trusty Pismo...) »)

  FYI - I have used the adapter is even cheaper now

  https://www.Amazon.com/GP/product/B009BA8V4M

• ThinkPad Edge S430 - is possible to replace the hard drive with an ssd?

  Hey, Lenovo,.

  I bought a Thinkpad Edge S430 and wonder if it is possible to replace the hard drive with an ssd?

  Kind regards

  Mikael

  
  

• Is it possible to replace the processor on Satellite A200-1AE

  Is it possible to replace the processor (T5500-> T7500 T7700) on the Satellite A200-1AE?

  You want to do this? Are you not satisfied with the performance of the laptop?

• Is satellite U400 - possible to replace the touchpad button?

  Hello

  I need help please. I want to know if there is a possible way to change the button to my Satellie U400 because they become soft and they are not as good and strong as it was before, please someone know if I can delete these and put 2 new sound?
  If you don't understand exactly what I want to say take a look at the photo and you will see/understand.

  [http://oi56.tinypic.com/j0wwoj.jpg]

  Thank you.

  Lööw salvation,

  I'm sure that it of possible to replace the touchpad buttons because you can replace everything on a laptop. But I think that it s a little trickier because you must remove a lot of pieces and that's not easy.

  You should ask an authorized service provider guys can order the new spare part for you and exchange it. Just write an email, for example, to get in touch with them.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Is satellite A200 - possible to replace the grapchics card?

  Hello!

  I've had my Toshiba A200 - 1 M 8 for two years now and everything was going well until one day, while working on this subject, it is just went down. The arrested LEDs had any, even when not connected to the power supply and the laptop wouldn't start. I checked the habit - power cable bad, trying to see if the leds are gone or the laptop start with and without the battery in. Then I checked if all the cables are connected to the mother board the right way - they were. Know a little of material and to be a student of applied computer science, I thought that the problem was probably with the motherboard or something related to it.

  So, an I unplugged devices connected to the motherboard to see if this allows the flow of power through the Commission. Long story short, it turned out that when I disconnected the graphics card (radeon HD2600 256 MB) the LEDs showed once again, and of course, the laptop started, but only a sound signal once or twice, which is normal when there are essential, as the map, missing. After a further inspection, I found that two blocks of memory on the card have burned completely, which explains why it did not work.

  So now, here's my question: 1. is it possible to buy a replacement directly from Toshiba? If not, how can I specify what I seek, when searching through stores online and how can I check if it would be compatible with my laptop? 2. If it is possible to replace the card, it would be possible to replace with a better model (like hd3470), this means that my laptop would be able to manage the best card and is it still possible to find a better card, mounting my laptop (physically, I mean, it's pretty tight in there: P)?

  Thanks for any helpful answer in advance, if more information is needed to answer my questions, I would be happy to provide it.

  Post edited by: Conkerns

  Hello

  (1) an authorized service provider can replace the VGA card to you, directly from Toshiba. There is a list of the ASP on the Toshiba site, in the support section.

  (2) Unfortunately, you cannot upgrade the VGA card in most laptops because there is no common standard model, the BIOS is coded to work with a specific VGA card and the cooling system is designed for the dissipation of the heat of this VGA card.

• It is Possible to replace the drive DVD Bluray for HP Pavilion dv6-6176sx

  Hi all

  It is Possible to replace the DVD Bluray for HP Pavilion dv6-6176sx notebook PC Player?

  Thank you

  Of course it isn't yet very difficult. You just need a BR drive or a drive? The replacement drive will be $80-120, or so, maybe a little less. You can find them on eBay. You can use a generic but that may require a redesign of the front or just get a car dv6-6000 BR on eBay. Trade on with a few screws on the bottom. Get out and drag the replacement. You will need new software to play BR movies, of course.

  Post back with any questions

• Is it possible to replace the image of the people who appear on the login page?

  Hello
  
  We are on ebs 12i. I was wondering if it is possible to replace the image of the people on the login page with custom ones?
  
  Dula

  Please see these documents.

  R12 Login Page: how to customize the Logo? [849752.1 ID]
  Tips to customize the E-Business Suite r12 Login Page (MainLoginPG) [741459.1 ID]

  Thank you
  Hussein

• Satellite L20-149: is it possible to replace the video card?

  is it possible to replace the video card in my laptop L20-149?

  because I can not play on my video card intel because its slow and boring... don't worry not about the warranty because its not valid anymore

  No, it is not possible to s.
  Why? I could list several points why it s not possible, but this question was asked several times in this forum.
  He just use the Toshiba advanced search forum and search for updated graphics card.

• Is it possible to replace the battery on Satellite L300 - 12K?

  Hello

  Is it possible to replace the battery?
  That are available?
  Where can I buy it?

  Thank you

  Hello

  Of course, the battery can be exchanged and you can buy it from a local computer retailer or authorized service provider.

  On the Toshiba site, you can search for compatible batteries and part numbers. You should check this:
  http://EU.computers.Toshiba-Europe.com-Online Services devices & -online PC Options & accessories

  Welcome them

• Is it possible to replace the graphics card on my Satellite Pro?

  Is it possible to replace the graphics card on my Satellite Pro?
  I need to so that it can run CAD software. Anyone know if it is possible, or it is soldered to the motherboard :(

  No, it is not possible given that the graphics chips more are part of the motherboard.
  In some cases, it of possible to remove the graphics chip on the motherboard, but in this case that it must always use the same GPU for this motherboard.