Is it possible to run a diagnostic on my monitor?

Similar Questions

• Is it possible to run DiagOnCAN with the NI-CAN driver only (without car Diag command Set)

  Hello world

  Is it possible to run DiagOnCan without using Diag command set auto - only with the NI-CAN driver (hardware I use is low tolerant speed - USB8472 and NOR-XNET)?

  G. Petko

  no problem to do with your hardware and NI-CAN frame API.

  However, you must implement the Diag and Services Transport layer on your own, which is quite a big job.

  I recommend you spend the money for automotive diagnostic command set that supports

  • NI CAN (PXI, PCI, PCMCIA, USB)
  
  
  • NOR-XNET
  
  
  • cRIO/985 x target (Pharlap and VxWorks) #.

  which means that if you plan to transfer your application in the future to different hardware target or the real-time target, that you don't need to change your app at all.

• Is it possible to run files apk on my phone SE

  Is it possible to run on my SE apk files?  Thank you

  # An apk file is a package Android file, and which would not be in the iOS. You couldn't install Android on an iOS device, as it would not be in the App Store, which is the only place where ever you get things to install on the iPhone.

• Is it possible to run Safari7 on 10.7.5 OSX? I can't upgrade the software of other system on my Mac.

  Is it possible to run Safari7 on 10.7.5 OSX? I can't upgrade the software of other system on my Mac.

  N °

  (143905)

• Is it possible to run Windows 7 on Tecra S1 PT831E

  Hello

  is it possible to run Windows 7 on my Tecra S1 PT831E 126PQ?

  I've updated the BIOS (last?) version 2.50 (it should be suitable also for Windows 7). With this done BIOS is fully compliant with ACPI?

  Checking with Windows 7 Upgrade Advisor should not be a problem, in fact.

  Thanks for any help.

  Well cordially

  ThomasMuentzer

  Hello

  Of course, you can install Windows 7 on your good old classic.
  But the fact is that there is no official driver Win 7 on the page of the European driver Toshiba, it seems that you have to collect the pilots in his own hand.

  But in general this should not be a problem of submission.
  WLAN, LAN drivers can be downloaded from the pages of chip manufacturer driver touchpad can be used in other models of computers, laptops and Toshiba as VAP (value added package) Flash cards tools or similar

• HP EliteBook 8570w: is it possible to run two monitors on a 8570w without a docking station.

  Is it possible to run two monitors on a 8570w without a docking station. Connect a monitor to the VGA port and the other to display port.

  I was able to get this to work. My 8570w has an Amd over-pants 7700, don't know if that matters. One is connected VGA other Displayport. The port monitor must have a custom resolution defined in the over-pants Control Panel. except that it works perfectly. More laptop screen no. Docking Station 2 24 inch Dell.

  And thanks for the quick reply Provost.

• Is it possible to run virtual machines on Satellite A500-1DN?

  I want to know its possible to run a virtual machine on my laptop?

  (Windows VM cannot start the computer does not support hardware virtualization ed)

  Help please

  Even if the processor supports virtualization, it can be disabled in the BIOS by default and must be activated before use.
  Then please enter advanced BIOS settings and check if the virtualization technology is enabled or disabled.

• Is it possible to run splitview with two-mode applications landscape on iPad pro in portrait mode?

  Hello

  Is it possible to run splitview so that both applications are in landscape mode, while now the iPad in portrait mode?

  So basically, instead of apps side by side, it would be top apps down.

  I use goodreader to watch a video while surfing the web on safari. But when he was knocked down by side there are a lot of realestate lost on the side of the video.

  see you soon

  Unfortunately not. If I was a Pro too much it would be my favorite. Try using the comments link to suggest to Apple.

  http://www.Apple.com/feedback/

• There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  Hi, I m a bit new in LabVIEW and I'd like to ask a few questions...

  -There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  -One API PI or raspberry beaglebone exists for LabVIEW?

  -Power supply Wich can recommend you control with LabVIEW? (some chip solution witn 0 - 30v / 0 - 3A DC)

  Thank you very much for your advice!

  Best regards

  Elena

  Elena,

  I know raspberry, so no comment on that.

  For the rest:

  -Do you want to create tools for developers? If so, we must look in the API of project VI and VI server. If this isn't the case, please compile your application LV as executable and call this one using a batch file.

  -LV prefer specific supplies. LV is a programming language. There are several power supply providers (including OR) which provide directly the LV API for their power supplies. So, essentially, the approach is:

  1. choose food that serves your needs.

  2. check if the power supply has a standard interface for programming (such as Ethernet, GPIB, or if the power supply is PXI, is already providing a programming interface!)

  3. check if the LV API (so-called "instrument driver") is available for the device. In the case of a PXI system, get you a device driver (for example NI DCPower).

  4. check if the LV samples are available (for example in the Finder for example LV once you have installed the driver).

  Norbert

• Is it possible to run an executable on a Windows Phone 8 Labview?

  If I create an executable of Labview, it will be possible to run it on a Windows 8 phone?

  No, as Mike has already said.

  The reason is that an executable of LabVIEW contains a binary code that is compiled for the x 86 architecture CPU, and access to the Win32 API. Windows Phone general works on the ARM or RISC processors and provided only a subset of Win32 very limited in the past. With the new Windows RT technology that he actually moved even further the Win32 compatibility as it is all architecture is based on .net technology.

  So even if you happen to get a processor Intel Atom based device Windows Phone that would be compatible x 86 it couldn't work, because a LabVIEW executable is an executable format portable Win32 is not a picture of .net bytecode.

• Is it possible to run a 3rd monitor in my Pavilion dv8t

  Is it possible to run a 3rd monitor in my Pavilion dv8t

  Hey gogydog,

  You can have a maximum of 3 displays with this unit (depending on your configuration): a connected to HDMI, a connected VGA and LCD integrated Notepad. So, 2 external and 1 integrated display. It is not possible to connect 3 external displays, unless you use a third party (such as Matrox DualHead) material, however the quality/compatibility is not guaranteed.

• is it possible to run both systems, such as windows xp & windows 8 on a pc

  is it possible to run both systems, such as windows xp and windows 8 on a pc at the same time

  Hi Susan,.

  Actually run two at the same time?  N ° having two installed so that you can choose which you want to run?  Yes (as long as your computer can accommodate two operating systems and has appropriate and such pilots and you will understand the compatibility requirements and other rules for software application).

  How to do this depends on which two average you and your hardware (you could partition the disk to dual-boot, use readers separate for dual boot or create a similar to a dual-boot configuration, if the two you choose cannot work together in a normal dual-boot or use a Virtual Machine installed on an operating system to install and run the other OS and so on).  Certain combinations will be much easier than others.

  So the answer is it is theoretically possible to have two (or three or more) installed, but not running at the same time - but I guess it could be argued that a Virtual Machine means in fact the two BONES are technically running - but that's just the way it seems to me since you can use only one at a time) , but may not work in your specific situation depending on your computer hardware and bios, the software you use, which specifies the operating systems you want to be able to access separately and so on.  To do this, we need information much more to offer help.

  I hope this helps.

  Good luck!

  Kosh

• Is it possible to run the restore of the system from a command prompt?

  Plug;

  Dell Studio 540 Quad core 3, 2 GHz (don't remember exactly?) processor

  Ram 8BG

  Windows Vista Edition Home Premium

  In general, everything was working fine until I ran the auto update for Vista. I don't know exactly which updates made it crash (that's the downside to update automatic, I guess?), but what happens is;

  PC powers up correctly, and everything seems to be in order up to and including the connection procedures. Once connected, the first error message pops up saying: "Windows Explorer" is not working properly and has restart. This will make a loop again and again, and as long as the error is running, I'm not able to perform all actions either. The only thing I am able to do, is to run the Task Manager, but if I try to run applications, programs or processes there, the Task Manager itself is in need of a reboot. So, basically, the only action I can perform the Task Manager is turn off the PC safely.

  Helps out;

  Ran memory diagnostics, no error found.

  I ran system restore, not detected no results. (....) According to me, if I could run Vista system restore as soon as Windows Explorer is stable, I can choose a restore point prior to the restoration defined point in chest upward and it will solve the problem.

  I ran the repair of the system, but the PC does not recognize a problem, according to the definition, the start sequence works as it should.

  I ran the security modes to see if I can access previous system restore points, but like windows explore does that no action can be taken. It's the safe mode; Base drivers and base with network connection drivers.

  I ran the command line safe mode, that works very well, but don't really know what I can do from there.

  I have the option to reinstall the OS, but I hope a response must be made of this? My thought is;

  Is it possible to run the restore of the system from a command prompt? And if so, where is the path, finally, what should I do?

  This starts the system restore
  %systemroot%\system32\rstrui.exe
   
  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.
   
  --
  ..
  --
  "Arefare" wrote in message news: f6b7f70f-b8a0-4291-ae95-92a4d659f16a...
  > Care;
  >
  > Dell Studio 540 Quad core 3, 2 GHz (don't remember exactly?) processor
  >
  > Ram 8bg
  >
  > Windows Vista Edition Home Premium
  >
  >
  >
  > In general, everything was working fine until I ran the auto update
  > for Vista. I don't know exactly what updates does plant (it is
  (> the disadvantages of the automatic update, I guess?), but what happens is;
  >
  > PC powers up correctly, and everything seems to be in order until.
  > and including connection procedures. Once connected, the first error message
  > comes up saying "Windows Explorer" is not working correctly and to
  > restart. This will make a loop again and again and while the error message is
  > ongoing enforcement, I'm not able to perform all actions either. The only thing
  > I am able to do, is to run the Task Manager, but if I try to run a
  > applications, programs, or processes, the Task Manager itself needs
  > a reboot. So, basically, the only action I can perform the Task Manager is
  > turn off the PC safely.
  >
  >
  >
  > Helps out.
  >
  > I ran memory diagnostics, no error found.
  >
  > I ran system restore, not detected no results. (....) I think that if I could
  > run Vista system restore as soon as Windows Explorer is stable, I can
  > Choose a previous restore point as the restore point defined in boot up
  > and it will solve the problem.
  >
  > I ran the repair of the system, but the PC does not recognize a problem, as in
  > definition, the start sequence works as it should.
  >
  > I ran safe mode to check if I can access previous system
  > points of restoration, but as windows explore does not perform any action can be
  > catches. It's the safe mode; Base drivers and base with network drivers
  > connection.
  >
  > I ran the command prompt in safe mode, which works very well, but don't really know
  > what I can do from there.
  >
  >
  >
  > I have the option to reinstall the OS, but I hope a response is to
  > do this? My thought is;
  >
  > Is it possible to run the restore of the system from a command prompt? And if so, where
  > is the path to him, finally, what should I do?
  >
   
   

• Is it possible to run the command script with user account administrator rights?

  Is it possible to run the command script with administrator user account rights means please tell me how to...

  I need to run it in windows 7 professional service pack 1.

  There are a few myths that won't go away, for example

  • You can perform administrative tasks when you are working from a command prompt.
  • A script (batch file, VBScript, PowerShell) gives you administrative rights.

  There is no substance to a myth. Your account has administrator privileges, or it does not. There is no backdoor.

• It is possible to run Easy Transfer after upgrading to Win7 AND AFTER installs all applications?

  Update of XP (32 bit) for Win 7 (64-bit).  Transfer easy on the old system and also saved.  Performed a clean install of Windows 7 without any problem.

  The instructions say to upgrade Win7, then run to transfer, and THEN install the apps.  Well, I have not read the instructions and correctly installed Win7, installed applications and now need to execute the transfer.

  That is problem?  It is even possible to run easy transfer now?  Should I reinstall all applications again?

  (I'm not worried for the part 32-bit to 64-bit, I just included this info with full disclosure).

  Thank you
  brand

  Thanks for the post brand.  the transfer is intended to capture data and the status of the user.  He didn't have much to do with the migration of the applications with the exception of the view that it is able to create a report that identifies what applications may need to be installed on the new machine.  in order to integrate the data of the machine inherited from the windows machine 7, we should have run the version of Windows 7 easy transfer on the Windows XP machine before recharging.

  If we capture the data of the XP machine before reloading, then we can re-read the data at any time - even after that applications are installed

  Here's hoping that you captured user data and the State with easy transfer before you wipe and reload.

  / rich http://cbfive.com