Is it possible to start of eSATA?

Similar Questions

• Is it possible to start Firefox without having to open any page, not even a blank page?

  Just curious. Is possible to start Firefox 4.0.1 without opening any page, not even a blank page?

  No, you can hide the tab, if there is only one tab open, but it's not good to do.

  Perhaps if you explain why you don't want a blank tab, maybe we could have a nicer-sounding answer, if the answer is still no.

  What I don't like in Firefox 4, which is a blank tab ("" subject: vacuum "") presents itself as 'New tab' which is incorrect, once you do another thing the former title on the tab before 4.0 was more correct and it was in parens so he showed better as "(sans titre) ' on the close tabs and is correct, because it has no title."

• Is it possible to start the gateway of 2014 VeriStand using LabVIEW 2014 programmatically?

  Hello

  There is a reload of the Is-there-a-possibility-to-start-the-VeriStand-2011-SP1-Gateway because what worked in 2011 SP1 is no more in 2014.

  I've worn the code in the previous topic, do the same thing (calling "__cdecl Int32 StartVeriStandGateway (excluding handle Int32)" in "C:\Program Files (x 86) \National 2014\Data\NationalInstruments.VeriStand.Gateway.dll".)

  Do this from a .NET (console process or windows) program or directly from a node DLLS in LabVIEW 2014 seems to have no effect, knowing the .NET code worked in 2011 even when it is called from a Windows service.

  Is there a new way to do it?

  Moreover, the "NationalInstruments.VeriStand.WindowsRegistry.GetInstallationDirectory ()" method disappeared from assemblies.

  Best regards

  I remember before I saw this. There was a problem where the dll cannot run in the UI thread, but has no way to specify any thread, but the LabVIEW user interface thread. So, the solution was to put DLLS in a sub - VI, value than Subvi to run in the 'standard' thread and calls the value of the call to the DLL to run in any thread. See attachment.

• Is it possible to start an application with the settings

  Hello together,

  I wrote an application that is stored on a network. Another computer people begin to work with it. Now, I have the problem, that I need a few different configurations on each computer.

  It is possible to start an application labview with parameters, such as: application.exe - User_1

  The application must check the settings and should move to the required configuration.

  Thank you very much and best regards,

  Michael

  Hi Michael,

  Yes it is possible. First, you need to enable the transfer of data from your settings. You can do this in the application builder. It's something like 'send command line for exe settings' you will need to activate. You will get the setting in your program with the property "App.Args". It's an array with the name of the exe as the first element and an entry for each additional parameter bound.

  It will be useful.

  Mike

• Is it possible to start it native Win7 since Win7 host?

  I would like to run two Windows 7 installs (each on their own physical drive) with the possibility to start both natively and also open a via VMware Workstation v8.

  
  Details on the script:
  AHCI Disk1 = Windows 7 Enterprise 64-bit (volume licensed)
  AHCI Disk2 = Windows 7 Professional 64 bit

  
  Disk2 will be my main/guest I'll start the Nativity in 99% of the time. There work stations in which I would like the possibility to open Disk1 and start-up of the Nativity Disk1 remaining installed time 1%

  
  Please let me know if I missed all the details. Any advice or help would be much appreciated!

  seems ok

  I just checked your file vmx-even once.
  You use LSI - SAS but the vmdk is attached as IDE.
  Try the attached version

• Is it possible to start and stop the servers without using nodemanager?

  Is it possible to start and stop the servers without using nodemanager? If so, how?

  Hello

  Please follow the link below, it will be useful

  http://docs.Oracle.com/CD/E1322201/wls/docs81/ConsoleHelp/startstop.html#1243161_

  Concerning
  Fabian

• Is it possible to start the server managed through the weblogic console

  Is it possible to start the Manager of servers such as soa_server1 and oim_server1 of weblogic console? Please I need your help

  http://docs.Oracle.com/CD/E23943_01/apirefs.1111/e13952/TaskHelp/startstop/StartManagedServersFromTheAdministrationConsole.html
  http://onlineappsdba.com/index.php/2010/04/10/WebLogic-error-starting-managed-server-from-console-node-manager-associated-with-this-machine-is-not-reachable/

  -nayan

• Qosmio F20-149: how to start the eSATA disk OS?

  How can I boot my OS from an eSATA drive connected via a PCMCIA-SATA Adapter?

  Post edited by: MrG

  Hello MrG

  I was very interested about your previous assignment and I have to say I wonder what you do with your Qosmios when questions still outstanding.

  In any case, I know the start if the BIOS supports booting from PCMCIA, maybe it will work, but I guess on your Qosmio, it is not possible.

  Can you please give me more info on the operating system installed on the external HARD drive? It is the same image as on F20 or some other HDD portable?

• possible to start the MXI-3/PXI system after booting the PC?

  Hello

  I'm new here, so I just asked this question in another thread with a response. I did not notice that it was already marked as solved, so I'll ask again in my own thread.

  My problem sounds very akin to that of Kobi, but there are a few differences that hold my hopes up that the problem could be solved. Summary of the configuration of the system:

  -PC (MXI-3)

  -> PXI1002 (Chassis1)

  -> PXI8335 (port1 - in)

  -> PXI8335 (port2 - out)

  -> PXI5122 (measure)

  -> PXI1002 (Chassis2)

  -> PXI8335 (port1 - in)

  -> PXI5122 (measure)

  The goal is, as it is easy to guess, to be able to start at any time, additional measuring devices even when the pc is already running.

  The situation is different from ' Kobis in a precise point: in my case the cards and all equipment is permanently visible in MAX, even if I started after the pc has started. This change is the boss of the leds, and PXI cards do not pass the test in MAX. The following screenshot shows the configuration of the system how it is observed after the two ways to start the full system (first first pc or PXI).

  

  (Even if I use a German version of labview English my MAX partially keep, I hope this isn't a problem.)

  I have tried to identify the PXI system and chassis, but failed to get a different result. The NIscope screws are ordered initialization and reset of all sessions, but only if I turn first PXI systems.

  So you think it would be possible to achieve the goal of implementation, or should I stick to the start-up of the pc after turning on the PXIs? I did some research and I know, the installation guides to specify the order to turn on the devices, but I thought that it was only intended for installation/first round.

  I would be really grateful for any advice in the present.

  Concerning

  Max1744

  Hi Max,.

  There is no way around first PXI. Always start the PXI a d, then the PC system.

  concerning

  Tobias

• Is it possible to start the week with Monday?

  Hello

  is it possible to have weeks displayed in Instantis example for timesheets to start a Monday, not Sunday? If so, where do we need to change this setting?

  Thank you and best regards,
  Eva

  Eva,

  Our team is the week to start on Saturday instead of Sunday.  We have not found a way to change that in the last year we used Instantis.  All the experts we've talked about Instantis say that the week is not editable.  You can shoot and data from timesheet to report based on the week that you want, but we found that confusion and we do not.  I created idea # 11722 requesting a change to the week to start on Saturday.  You can add a comment to this saying that you need the week to start on Monday.  Ideally, the system would allow allows you to set the date of the beginning of the week.

  Thank you.

  Carol

• Is it possible to start a record from the source code?

  Hello world!

  I currently use JProfiler in combination with JUnit tests to collect metrics of resource consumption of features in our product.

  A runner for JUnit home starts and stops the recording of JProfiler and analyse recorded data. Then he compares the values to the pre-set limits, and fail the test if they are exceeded.

  Now, I want to change this option to use the flight recorder instead. I found an interesting article explaining how to parse files of .jfr here: using the flight recorder analyzers | Marcus Hirt
  

  Unfortunately I can not understand how to start and stop a robbery at the record from a JUnit runner, in addition to the use of the jcmd tool.

  Can someone help me?

  Thank you very much

  Tobias

  Hi Tobias,.

  It's pretty trivial in JDK 8 - just use the operations on com.sun.management:type = DiagnosticCommand MBean imitating the way you would use jcmd. Relying on the MBean JMC and corresponding APIs directly is not supported.

  That said, if you wish to register MBeans associated JMC, the following may be useful:

  Import java.lang.management.ManagementFactory;

  Import javax.management.MBeanServer;

  Import javax.management.MalformedObjectNameException;

  Import javax.management.ObjectName;

  public class {RegisterMe}

  private public static final String REGISTER_MBEANS_OPERATION = "registerMBeans"; NON-NLS-$1

  private public static final String CLASS_NAME = "com.sun.management.MissionControl"; NON-NLS-$1

  private public static final String MBEAN_NAME = "com.sun.management:type = MissionControl; NON-NLS-$1

  private public static final ObjectName OBJECT_NAME = createObjectName();

  private public static ObjectName {} createObjectName()

  try {

  return new ObjectName (MBEAN_NAME);

  } catch (MalformedObjectNameException e) {}

  throw new Error ("shouldn't be possible: could not take a new name of object" + MBEAN_NAME); NON-NLS-$1

  }

  }

  public public static void main (String [] args) bird Exception {}

  Ms MBeanServer is ManagementFactory. getPlatformMBeanServer ();

  ms.createMBean (CLASS_NAME, OBJECT_NAME);

  Ms. Invoke (OBJECT_NAME, REGISTER_MBEANS_OPERATION, new Object [0], new String [0]);

  System. .println ("Press enter to exit"); NON-NLS-$1

  System. in. read();

  }

  }

  Kind regards

  Marcus

• E520 can start the eSATA drives and SD cards?

  While I don't have an SD card, I have an esata drive: team X 092. But when I go into the boot menu in the BIOS, I can't find my external drive if I use the esata port. I use the usb port and it works fine. When I'm on Windows, esata also works and it's pretty fast (it's why I bought it). I bought it because I like to try new operating systems, such as Win8CP (I use it now). It's really a waste of money if I don't use it as a drive normal usb 2.0.

  It is probably a bug in the BIOS, is it not?

  Also, I want to install a winpe on SD card. So when I can't load the OS on the hard drive, I still have a chance to recover my backup or remove incompatible drivers without finding my usb drives. If it is possible to boot from an SD card, it's great.

  E520 cannot boot from SD or eSATA. Sucks.

• Is it possible to start to make groups of tabs do not load until they are selected?

  I was wondering if there is a way to make groups of tabs in the background bother not to load until the group is selected. That is when I start Firefox it loads the group I was last on normally, but all those in the background not up to what I have access to them.

  • Load tabs progressively: https://addons.mozilla.org/firefox/addon/load-tabs-progressively/
  • BarTab Lite: https://addons.mozilla.org/firefox/addon/bartab-lite/

• Not possible to start after recovery

  Hello

  Yesterday my Toshiba Satellite L555-110 is not stopped correctly. It looked like endless loop, while Win 7 (64 bit) showed "logout". I turned the laptop off (5 sec power button). After that, Windows is not started anymore. There was a black with a message screen as 'Please make sure that all devices such as hard disks, CD-Rom drives, etc. are well connected and try again.
  I thought that I hit the file system and started a live Knoppix CD. I tried to fix the file system with ntfsfix on each partition. This does not solve the problem, so I tried to fix Win7 with the Original Win7 from my other computer disk. In the installation menu repair tools is not started, so I had to stop the computer again.

  I thought that the problem could be the MBR after that. I searched the web and found a "command of Knoppix'"sudo testdisk"with the option"write MBR ". After trying this, the error message has changed, that the computer does not recognize the bootloader more. Here, I decided to use the recovery DVD that I created after purchasing the laptop.

  Once the recovery is finished, I tried to boot Win7, but there was a new error message (on a black screen) who told me that there are files broken in C:\Windows\system32\drivers.
  As my girlfriend has the same model of laptop computer than me, I decided to copy the folder "drivers" of his laptop (after the renaming the originial files), start knoppix, and copy it to my laptop. While trying to boot Windows with the 'safe mode' option there is no error message more appear, but now I have a hangup.
  After that I tried to install Win7 with the original disc in my other computer, but when you try to install, there is a message 'C:\$Secure' kind of broke down. Try the chkdsk command. Repair tools has not responded (infinite loop) after a few minutes of trying to find the Windows installations

  Can someone help me? I have no idea what to do at this point

  If you have two absolutely identical laptops equipped with identical hardware put HARD drive laptop s girlfriend in your laptop and try to start Windows.
  Please post the result.

• It is possible to start/powered by Satellite C if lid closed?

  I have a HDMI monitor and wireless keyboard configuration so the laptop lid is closed for most.

  I said windows 8 to the 'status quo' when the lid is closed on AC or on battery, but if I need to reboot the laptop for Windows updates, it activates again.

  If the cover is open, then it is not a problem.

  Is it possible to configure the laptop to boot/power with the lid closed?

  Thank you

  What cell phone do you have exactly?

  > so it is possible to configure the laptop to boot/power with the lid closed?

  No, if the device is turned off, you must open the cover and press the power button to power the unit in place.