SE connect/disconnect the 3g automatically

Similar Questions

• Unable to connect to the Internet automatically after the restart with Linksys WAG 320n

  We have a problem with Linksys WAG 320n router that after rebooting the router it does not connect to the Internet automatically.

  instead I required to connect manually by clicking on State-> Connect.

  As previously he was showing server status DNS IP addresses, now it does not appear after connecting also.

  "" Could you let me know wheather miss me an option to automatically connect with LAN "' after reboot or anything else the cause.

  Thanks in advance.

  Thanks guys...

  After changing some settings wireless - bandwidth to value 'Standard' and MTU change, its done!

  Finally, the problem has been resolved. Now I can connect automatically when I restart the router and display the DNS IP addresses too.

  Thanks once again for most people trying to help me.

  I have another question and I would like to post separately instead of mention here.

• Students cannot "connect/disconnect the virtual machine's CD/DVD devices.

  I will start with this context (and apologies for the wall o ' text): I'm a newbie.  I took the course VMware local community college offers [VMware ESXI Server Enterprise (CIS197)], but I've not yet certified. And I don't have a real experience, except what I have taught myself so far.

  I recently accepted a position of learning associated with the College (think: glorified lab tech). I was tasked to work with stuff from VMware in the laboratory (among other things such as Cisco and Juniper equipment). There is no pass-down information like the previous left the position four months ago.

  We have a single host running ESXi 348481 4.1.0. "We have vCenter Server (5.5.0, 1312298), running on Windows Server (2008 R2, Enterprise Edition).  Access host and vCenter through two different IP, addresses using the vSphere client (either 5.5 or 4.1, using a single application - depends to know if I connect to the host or vCenter).

  At that time, the host is using local storage only (we have plans to change this, but it will take time).  The host is not a production on its own server, because it does not have a school systems.  He does, however, run a number of virtual machines in the lab, students use (Linux, Microsoft, Web design, etc.).  So, right now, I can't take it down.

  I was tasked to create a number of virtual machines that students can use to make the basic labs of Microsoft Windows 7.  So far, I have:
  -Created users, one per student, on the host.
  -Creating VMs, deploy one per student, I have a gold model vcenter.
  -Creation of roles to limit the access of students to just their VM attributed, which they access via client vSphere.
  -Created a Windows Server 2008 R2 domain controller that is also a DHCP server.
  -Created a virtual network, which is accessible only by the Windows 7 virtual machines and is not visible outside the vSphere environment (if I said this right - he does not see the Internet or school network).

  So far, it's all good.

  However, I need to be able to allow students the ability to edit the ISO file on which their VM points in order to complete some laboratories. I guess they would use the button "connect/disconnect the virtual machine's CD/DVD devices" on the taskbar (or console window). It does not work.
  I searched a lot and found that others have had the same problem.  However, all of the solutions I've tried so far have failed.  When they click 'Connect to ISO image on the data... store. "they get an error message means nothing to me,"an internal error has occurred in the vSphere Client. Details: Object Reference not set to an instance of an object. Contact VMware support if necessary.
  The role that I use for students has these settings:
  -Data store > Browse the data store
  -Virtual Machine > Configuration > change the settings of the device
  -Virtual Machine > Configuration > settings
  -A bouquet under the virtual machine > Configuration >
  -Configure CD media
  -Console interaction
  -Connection of the device
  -On
  -Power off
  -(and more, which I don't believe are important to the question)
  -State > create the snapshot
  -State > go back to the snapshot

  I tried "Virtual Machine > Configuration > add existing disk", "Virtual Machine > Configuration > add new disk" and "Virtual Machine > Configuration > add or remove an instrument" with no luck.

  Either by the way, the root account can do all these things, but no other account can - not even a game as an administrator account.

  I've seen mention I have apply the role in the data store.  It is perhaps part of the problem. I can't see the data store when I am connected to the host (wellll, I can, if I click on the host name, then on the Summary tab - but roles do not apply at this stage).  I see is 'Inventory' (which has virtual machines and Pools of resources), 'Rôles' and 'log files '.

  I can see the data store when logged in vCenter. Roles of students, however, are defined on the host computer. If I clone the role of users in vCenter and change this role cloned to have "permissions" that those who are on the host computer and then apply it to the data store, it still does not work.

  So, after all this (which I hope I've included all the necessary information), what can I do to allow the students to change ISO to which they are connected?

  Of course, if I left something, or if someone has a question, please ask.  I want to get this resolved as soon as I can.

  It turns out that I finally found the solution to the problem.

  What 'fixed', it is sufficient to vSphere Web Client to vCenter, which then allowed us to use Single Sign-On (SSO).  This, in turn, allowed us to define users and roles in vCenter (rather than having set them up directly on the host computer) which have then been applied to the VMS of students and also to the data store.

  Now, they can (de-) connect their ISOs at will.

  I find it interesting that vSphere Client (application) shows the users (and the things that they have access to), but it won't let you set of users.

• Microsoft ISATAP adapter N3 doosn can't work, code 31 error. I can't connect to the Internet automatically?

  My laptop is a Toshiba Satellite Pro L300 still under warranty. Toshiba said firstly uninstall the adapter (which is) then install new version. Well I would if I could find it! But as far as I know it is Uptodate, according to the analysis of the update in Device Manager! As I'm pretty useless with computers still HELP! Thank you!

  Hello

  Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore errors if you wish and on some
  computers, it will always be there but no problem to be expected.

  On a Windows Vista-based computer or on a computer, Windows Server 2008, the card Microsoft ISATAP
  appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Automatic connection to the Internet in Windows 7. Possible or not.

  When I start my computer (using Windows 7) I get a pop up that says connect to internet.  It has a checkbox indicating automatically connect.  Click this check box and then connect.  Next time I'm starting to get the same thing again.  Is it far to automatically connect to Windows 7 without having to click on connect!  Have been able to connect automatically in the latest version of Windows. Have a wired LAN connection, which I'm working on the computer.

  Hello
  Welcome to the Microsoft answers site.

  Who is your Internet service provider?
   
  Yes, it is possible to connect to the Internet automatically in Windows 7.
   
  I suggest you contact your internet service provider to configure settings to connect to the Internet automatically.

  Thank you and best regards,
  Azam - Microsoft technical support.

• Anyone else had problems with the connection switched to the internet automatically? More details

  I had this problem since the first part of January 2011. I use a dial-up connection, I have windows vista home Premium 32 bit. I can click on the internet icon on my desktop what the little box that has a checkbox to automatically connect to the internet, the diallog which is supposed to have the name of the internet connection is empty, it tries even to compose, but he does not open the port to dial an outside line. All the time I have a tick on my tab internet connections dial options each time that a network connection is not present or always dial my connection default slot choose settings if you need to configure a proxy server for a connection, it will not work on one, I can manually connect using of these (one at a time) but every time I click on the internet icon does not recognize a connection already exists, I get this message telling me that I need to connect to the cause of the internet, I work in offline mode. Whenever I get that message I click on connect to go online then it trying to connect automatically by calling and then I get this message, it cannot establish a dial-up access and still it does not open the port to dial an outside line.

  I can connect manually using the same connection and put the check box on the never dial a connection under select parameters if you need to configure a proxy server for a connection on the connections to internet options tab and I don't have a problem connecting to the internet. I did a reset and set up a new connection and that didn't work either.

  The Connection Wizard recalled the correct information, it was not correct that then I would not use this same computer online now. The reason is that I am currently using the same computer that has the problem of not being able to connect to internet automatically online. This same computer that has the problem of not being able to connect to the internet automatically, it will connect manually using exactly the same ISP configuration by routing the connection in order to never establish a connection on the internet connections tab options, while I'm on dial upward, it is assumed to be always dial my default connection under choose settings If you need to configure a proxy server.

  I have windows Vista Home premium 32-bit with service pack 2

• Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

  Question asked by Neil Clark (me)
   
  I selected the option Connect automatically in Windows Live Messenger when I turn my computer. Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
   
  Sunday, August 22, 2010 01:54

   

  Windows Live K - Ann C response.

   

  Hi Neil,

  This error occurs usually when a record has been changed when an update has been performed on your computer. To resolve this issue, follow these steps:

  
  Important: before you edit the registry, make sure to save, to understand how to restore the registry if a problem occurs.

  Warning: If you use the correct registry editor, you may cause serious problems may require you to reinstall your operating system. Microsoft does not guarantee that you can solve problems that result from the use of the Publisher of the registry incorrectly. Use the registry edit at your own risk.

  
  BACKUP REGISTRY KEYS:

  1. click on Start, click on run

  2. type regedit and click Ok

  3. in the registry editor window, click desktop on the left side to make sure that you backup all the registry keys.

  4. click on file and click on export

  5. save the file on your desktop or in your desired location. It will have the default extension (* .reg) to back up the registry.

  6. If you want to restore a file to the registry, in the Registry Editor window, click file and click Import

  7. navigate to the location and find the name of the file with the .reg extension and click Open.

  Note: you will be prompted that importation has been properly registered in the register.

  
  TROUBLESHOOTING STEPS:

  1. open the registry editor by clicking on Start, then run. Type regedit and then click OK.

  2 open the user Shell Folders folder. To do this, click on the + sign of each of the products listed below.

  a. click on the [] sign + next to HKEY_CURRENT_USER

  b. scroll and click on the [] sign + next to Software

  c. scroll down and click on the [+] sign next to Microsoft

  d. scroll down and click on the [+] sign next to Windows

  e. scroll down and click on the [+] sign next to CurrentVersion

  f. scroll and click on the [] sign + next to the Explorer

  3. click on the User Shell Folders. A list of entries appears on the right side. Double-click AppData.

  4. the value data, type the following entry, and then click OK: %USERPROFILE%\Application Data

  5. close the Windows Registry Editor and restart your computer.

  Thank you

  K Ann C.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

   
  Thursday, August 26, 2010 09:27

   

  Response from Neil Clark

   

  Hi K - Ann,

  Thank you for the above information.

  I followed you instruction to back up the registry keys, but when I followed step number 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.
  
  So I closed my computer and restarted. I then followed your instructions again (this time save the backup of the registry to a member in the same library, called "Backup260910bkup"

  Yet once, when I followed the number of the step 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  Can you tell me what I need to do to work around this problem of backup of the registry?

  I look forward to receiving your response.

  Thank you

  Neil Clark.

   
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Monday, August 30, 2010 22:19

   

  Response of Windows Live Mechell P.

  Posted by Neil Clark

   

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  For this error, you must contact the Support Windows via Microsoft answers Forum link below:
  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Thank you
  Mechell P.

  Hi NeilRClark,

  When a registry key is blocked from change, the user can also run a. Registry Registry REG entries to merge the registry keys, values or the value in the system registry data, with the following permission denied error message:

  Cannot import RegistrationEntries.reg. Not all data was successfully written to the registry. Some keys are open by the system or other processes.

  To solve this problem, the ownership and grant full control (read and write) permissions and rights on the protected system registry key.

  Check out this link to do the same thing:

  How to capture a file or a folder in Windows XP

  To take ownership of a file or folder

• Unwanted automatic reactivation of the Mode standby mode when it is connected to the Internet

  I have a relatively new home office Pavilion model p6140F, product number NP192AA, version number software 93NAv6PrA2.  Factory installed operating system is Windows Vista Edition Home Premium, 64-bit, Service Pack 2.  I am connected to the internet via a cable modem.  I made energy-saving settings for automatic sleep mode sleep.  Quite often the computer comes out of fashion "sleep" on its own.  What is strange to me, is that when this happens and I click the Start button at bottom left of the screen or any buttons on the Quick Launch bar, nothing happens on the first click.  Only on the second click the computer is what I normally wait until it gets when clicking on the Start button or the quick launch of the first time button.  I tried an experiment by disconnecting the internet cable from the computer modem and the computer behaves as I expect.  He remains in the mode "Eve" from one day to the next day when I unplugged the internet overnight.  It looks like something 'out there' on the internet is somehow take control of the computer, do not let it go in the mode 'sleep' and play with use and function of the 'Start' buttons and the quick launch area.  At the very least, it's embarrassing, if not malicious.  Is occurring with other users?  Wouldn't be some 'normal' functioning of monitoring by HP, Microsoft, providers of security software that I have permission, or is this behavior that should not be expected.  Thanks for any direction on the techniques of 'analysis' on mine could give clues at the origin of this strange behavior.

  Bad Board.  Marking as resolved.

• I have a Vista Enterprise desktop connected to the local network, but the notification icon still shows disconnected state

  I have my Vista connected to the network and the "network and sharing Center" shows that it is connected and network is accessible, but the network in the status bar icon displays an icon showing disconnected state. How to solve this problem? Restart does not help

  Guru

  Check and make sure you have these services defined in this way. This initiative will establish whether there is a connection.

  1 - on the road - network Manual connections
  2 network list Service - auto-
  3 network Location Awareness - road - automatic
  4. bad Service Network Interface - on the road - automatic

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• How to disconnect CC for connection to the internet? FACT DELIVER ALL THE CC SLOW PROGRAMS

  Hello

  Yesterday, I finally brought the CC, but unfortunately I do not have

  could use inside in all it's glory it runs very slowly.

  THIS ISN'T DUE TO A PROBLEM OF MY PC.

  When I ran Adobe Illustrator, it was extremely slow and laggy.

  I suspect it's because of how the CC connects to the internet,

  First of all, I would like to try to make the CC so I extremely slow internet

  stop automatically connect to the internet, because it's more like problem,

  I already turned off file synchronization.
  

  I'm open to other troubleshooting, but this is probably my problem, HOWEVER

  don't tell me trying to close other programs and as my PC is more than capable of

  running several things at once.

  Specifications of the PC:

  •Windows 10 home

  •Gigabyte GA-Z97X-SLI Motherboard

  •GeForce GTX770 4GB

  •Processeur Intel i7-4790 to 3.60 GHz

  •Kingston 16 GB of RAM

  •Cooler Master 700W G series Bronze PSU

  • Kingston SSD 120 GB

  • Seagate 1 TB HARD drive

  •Corsair H100i CPU cooler of water

  UPDATE:

  
  It seemed to have improved speed of the program very much,

  by disconnecting the Internet access through windows firewall.

  If you have any other recommendations to speed up the program

  even more of his personal experience please comment below.

  Thank you

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• How can I get firefox to launch automatically on connection to the internet

  I want that firefox will automatically launch when I connect to the internet

  Put a shortcut to Firefox in your Windows startup folder?

• How to stop iPhone to convert to the iMessage automatically when connected to the Internet?

  I have an iPhone, and some of my contacts are saved with iMessage and SMS. Whenever I start a conversation with a contact, it is a conversation of message text (green bubble), but as soon as I try to text the person while I'm connected to the internet, the conversation turns into an iMessage (blue bubble) conversation. I don't want it to do as sometimes the contact cannot be connected to the internet and therefore will not receive a my test up to connect to the Internet. How to make a conversation that began as a conversation of SMS RESTENT a SMS conversation, whereas if I don't want to start a conversation with the same contact iMessage, I manually converted an iMessage conversation?

  Thanks in advance guys.

  You can do that unless you put temporarily out of your data connection (settings-> cellular) or disable iMessage himself.

  But the good news is that you don't have to do either. In settings-> Messages, you will find an option called "send as SMS. If you turned it on and your receiver remains offline for a few minutes, the message will be sent as message text automatically.

  In addition, if you see the iMessage has not been delivered, you can tap and hold the bubble and will give you the ability to send as message text as well.

• Drives and airport Extreme Base Station to disconnect after connection to the VPN

  At home when I'm on WIFI, everything works fine. At the moment where I connect to the VPN to do office work, the base station will disconnect and accessible either.

  Any help?

  The problem you are experiencing is perhaps due to the type of VPN tunnel that you use to connect to your workplace. There are basically two types: 1) full or partial) 2. Note: The different VPN clients can use other words, but these are usually options when you set up a tunnel.

  When you use a complete tunnel, all traffic between your computer and the VPN of your working server, through the tunnel. No traffic is allowed on your local network, and therefore, all local resources are not available. With a partial tunnel, your computer data traffic, may as well go through the tunnel and also to your local network. One reason to use a partial tunnel, for example, is that you have a local printer, you need to perform printing. You can be connected to this type of tunnel for access to the documents and then, be able to print on this printer... otherwise, with a tunnel of full, you would print to a printer at your place of work.