Is it possible to visually buttons disable via the checkbox?

Similar Questions

• The Captivate offers the possibility of Visual highlighting, synchronized with the audio text?

  The Captivate offers the possibility of Visual highlighting, synchronized with the audio text?

  I knew what that s what I was asking the first question, not possible sorry!

• Firefox does support java applets if the "next generation plugin" is disabled via the control panel of the Java plugin.

  I'm still trying to get a definitive answer to this question.
  My applet is not 'Next Generation in line'. When we run our applet in Internet Explorer, it works very well as long as we disable the "next generation Plugin" via the Java plug-in Control Panel. However our applet does not work in Firefox if the cmdlet-the next generation"is disabled.

  It is a requirement that is I want to run an applet in Firefox 3.6.x or higher that the "next generation plugin" be activated via the control panel of the Java plugin.

  The current versions of Firefox (3.6 or later version) can only run Java applets through the next generation plugin.

  • http://Java.com/en/download/help/new_plugin.XML

• Configure button disabled on the playback device, manage audio devices. How can I reactivate the button Configure?

  Hi, following an automatic update of Windows Vista 64-bit I have no sound. Thank you for that.   I had a similar problem before, the sound quality has been reduced to a rate lower than 16 bit 44.1 k.  I've changed this before clicking on the button configure on the playback device, manage audio devices.  But now, this button is disabled and I can't check the set up or make changes.  I am logged in as an administrator user, how to re - activate the button set up?

  Thank you

  Darren

  Hello, I have stopped the Windows Audio Service and rebooted a couple of times.  Now I have his back.

  Thank you

• How to set the parameter for the button programmatically via the controller

  Hello
  
  I created a button in the advanced table (seeded page) as a column using customization called 'Submit', I pulled this button via PR in the extended controller action.
  
  Now I want to get the value of SuccessionPlanId (one of the column of this advanced table) when I press the button 'Submit' in the controller.
  
  If I can be able to get this means value of SuccessionPlanId I will then cross this value to the stored procedure, callable statement.
  
  So suggest me how do it in the controller.
  
  or tell me how to add the parameters programmatically to the button.
  
  Thanks in advance,
  
  SAN

  Hello

  package difference

  import

  oracle.apps.per.selfservice.successionmgmt.server.PerSuccPlanSearchVORowImpl . instead of

  oracle.apps.per.selfservice.successionplan.server.PerSuccPlanSearchVORowImpl;

  Thank you
  Pratap

• NEW-> button disabled in the Version Window VERSION

  Cannot create a new Version in the Version of DRM 11.1.1.2 window.
  
  Right-click AGAIN, and that VERSION is disabled. Impossible to select.
  
  There was a version by default, but I deleted all versions that I created to try to learn how to use Automator.
  
  Is there a setting that I missed? Or I have something in the repository (SQL) tank?
  
  Any comments would be appreciated.
  
  Carey

  2 options-
  -You will now have to re - run the script to create database that create the initial version. then you wil lbe able to create a new version.
  **********************
  Insert in Version (i_version_id, c_abbrev, c_descr, i_status, c_type) values (10, 'Original Version', 'Original', 1, 'Normal')
  **********************

  or

  -Use an import script or automator to create a version.
  --> FILE--> IMPORT or--> FILE--> AUTOMATOR

  I hope this helps.

  Stuart
  [email protected]

  Published by: stuart.porad on March 1st, 2010 19:50

• Disable via the mouse wheel scrolling

  Here's my situation.
  
  I have a text box that is filled with text (text that can be displayed). I have scroll bars removed so that you can not scroll with them, but you can still scroll with a mouse wheel. How can I disable this? I tried a number of things, but nothing seems to work.
  
  I think I need an event listener and a function must be performed on ScrollEvent.SCROLL, but what would it be? TextArea have scrollPosition, so I can't do myTextArea.scrollPosition = 0; or something of the sort.
  
  If anyone has an idea how to go about it, throw it upwards on the set, it would be really appreciated.
  
  Thank you!

  As I couldn't find anything on this anywhere... I'll post the solution I got programmers yahoo group.

  package
  {
  Import mx.controls.TextArea;

  public class newTextArea extends TextArea
  {
  override protected function createChildren() (): void
  {
  super.createChildren ();
  textField.mouseWheelEnabled = false;
  }
  }
  }

  -----------------

  
  

  provided by Alex Harui - blogs.adobe.com/aharui

• Is it possible to disable hardware acceleration via the registry or the command line?

  We manage a large number of computers used for the display of information - no keyboard/mouse interaction. We have encountered a problem with some SWF files and I'd like to test if it's resolved by disabling hardware acceleration. Is it possible to change this setting remotely (via the registry or the command line or other means)?

  Hello

  Yes, you can disable hardware acceleration on machines using the mms.cfg file.  Information on the use of the file mms.cfg to control the behavior of Flash Player is in Chapter 4 of the Guide Administration of Adobe Flash Player for Flash Player 14 | Adobe Developer Connection.

  --

  Maria

• How can I turn off the monitor (e.g., "standby") via the command line at the push of a button (or any other shortcut need not additional software)?

  Hello

  I don't like it when, after a break from work on my PC, the screen turns off as set up through "Power Options" in the control panel. That's why I put the relatively high threshold.
  However, when I know that I will not need the computer for a while, I want to save energy and wish the mode "sleep" could be activated immediately. Turn off the screen is not an option, because it has a USB hub built-in - off completely would be to unplug any connected device. Usually, if the computer has always works and might need the resources connected.

  Ideally, by pressing a button (or start a program or something), the screen would immediately go in mode 'sleep'.

  On systems prior to Vista and 7, IIRC, running a command in the sense of:
  Rundll32.exe user32.dll, SendMessage (HWND_BROADCAST, WM_SYSCOMMAND, SC_MONITORPOWER, 2);
  would do the trick. The dll should run the command to set the monitor to sleep. We could create a shortcut or even integrate the command in a batch file, but unfortunately it doesn't seem to work on Vista or 7.

  Does anyone have an idea on how to do it on Windows 7?

  I would strongly try to avoid having to install any additional software to help me. (There is quite a little all about, even free applications that promise to do exactly that, but I want to avoid them if possible.) "And I can't believe that this basic that could be done on XP cannot act more on 7!).

  Thank you for your help,
  NicApicella

  Hello

  Sleep is one thing and switching Off the Display is quite another.

  I found a way to turn off the screen in case you don't have a hardware switch or a keyboard shortcut as in my Dell Inspiron laptop (Windows 7).

  Create a batch with the following script file:

  echo off

  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-dc 1
  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-ac 1

  START/min/Wait C:\Windows\System32\scrnsave.scr s

  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-dc m1
  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-ac m2

  with the idle time to turn off your screen set in the Control Panel, replace m1 and m2.

  Control Panel > Power Options > any 'Active' diet Plan > change Plan settings > disable the display setting (minutes).

  For example, in my computer laptop m1 = m2 = 30 and 10.

  Now create a shortcut to the batch file and optionally assign a keyboard shortcut and an icon.

  Explanation of the script:

  The first two commands sets the idle time Display Off for the minimum possible setting of 1 Minute for the AC and DC (battery) power. The third command put the system mode blank screen saver 'instantly' and / Wait for the screensaver to terminate application. After 1 minute of inactivity, the monitor turns off power completely.
  The Saver screen/Wait is over by the event of the reactivation of a movement of the mouse button, the last two lines of code will come back the idle time-out settings of origin defined in the Panel view. This to ensure that after waking up, the display does not Turn off all 1 minute of inactivity expire.

  Kind regards

  Sushovon Sinha

• Is it possible to remove or disable the office bar see the taskbar?

  Show the desktop on the taskbar

  Is it possible to remove or disable the office bar see the taskbar?

  so doing several clicks is better than 1?

  Send your comments to MS and ask that the button can be deleted in Windows 8:

  http://mymfe.Microsoft.com/Windows 7/Feedback.aspx? formID = 195

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Disable add a button to the row over the selection of the checkbox in the OPS

  Hi all

  I have a custom page with a box and an advanced array, so in my advanced table, I "AddaRow" button on clicking that I add a new empty row to the table, my requirement is when I select the checkbox, then "AddaRow" should disable the button on the page, so is it possible, please give me a few pointer on this

  Thnaks

  In the controller

  private static int chk = 1;  Define overall

  In PR

  Table2 OAAdvancedTableBean = (OAAdvancedTableBean) webBean.findChildRecursive ("Table2RN");
  table2.queryData (pageContext, true); OATableFooterBean tableFooterBean = (OATableFooterBean) table2.getFooter ();

  If (tableFooterBean! = null)

  {

  Get a handle to the row of table add bean

  OAAddTableRowBean addTableRowBean = (OAAddTableRowBean) tableFooterBean.findIndexedChild ("addTableRow1");
  addTableRowBean.setAttributeValue (AUTO_INSERTION, Boolean.FALSE);
  if(addTableRowBean!=null)

  {

  System.out.println ("addTableRowBean is" + addTableRowBean);

  If (chk == 1)

  {

  addTableRowBean.setRendered (Boolean.TRUE);

  }

  if(CHK==0)

  {

  Here Addrow Button disconnect after selection of the checkbox

  table2.setRendered (Boolean.false);

  }

  }

  }

  In LICS

  OAApplicationModule am = pageContext.getApplicationModule (webBean);
  OAViewObject vo = (OAViewObject) am.findViewObject ("EmployeeEOVO1");

  for (row = vo.first () line; row! = null;row=vo.next()))

  {

  Rowi = rank (EmployeeEOVORowImpl) EmployeeEOVORowImpl;

  If ("Y".equals (row.getAttribute ("SelectFlag")) ') //Here I'm selected capture flag

  {

  chk = 0;

  pageContext.setForwardURLToCurrentPage (null, / / no parameter to pass)

  true, / / keep the AM

  OAWebBeanConstants.ADD_BREAD_CRUMB_NO,

  OAWebBeanConstants.IGNORE_MESSAGES);

  }

  }

  }

  Thank you

  Dilip

• Asks Bishop Sign-in button disabled

  Finally, I pulled the trigger and signed cloud last night.  A Bill for the first month.  I already had Photoshop CS6 and LR 4 and wanted to use the new features only available via CC and some other applications.

  Initial experience is very frustrating.  I went to download, downloading the new Manager applications installed, but when he started I see this:

  

  Note the Sign In button disabled. This is disabled or not something is entered for the adobe id and password.

  I tried the cat to support last night at about 22:30 on Saturday and was told that there were "server problems" and said try again in 2-3 hours.  I woke up at 5:00 and still the same thing.  This does not feel like a server problem, because I don't expect even to talk to waiters until I clicked on the button that is disabled.

  Help!

  RubyRedRick,

  I checked your adobe id and it seems fine. Looks like that the Manager (AAM) Application Adobe don't was not updated correctly or maybe something is unplugging it.

  What kind of environment do you work? Is it part of any field/office network or home network?

  The operating system you have?

  You use any sort of firewall or security software?

  Lets follow the steps below to Re-insall AAM and check:

  > Download and install the Creative Suite from Adobe cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html

  > Extract and run.

  > Select 'e' for English.

  > Hit 'Y' for Yes if requested.

  > Select Option 3 for creative cloud.

  > Then select Option 1 for Creative Cloud Installer.

  > Rename the OOBE, OOBE folder to:

  Mac: MAC HD/Library/Application Support/Adobe

  Win: C:\Program Files (x 86) \Common Files\Adobe\

  > Also, if there is a process running named 'AAM Update Notifier' or 'AAM recording notify ". Kill these processes and try to reinstall Adobe Application Manager and check.

  > Download and install the latest version of Adobe Application Manager from the link below:

  Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773

  Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774

  Please answer these questions, same problems.

• Disable the button Archive in the custom Viewer

  Hello

  Does anyone know if it is possible to disable the button to archive in the custom viewers? I'm building a custom Viewer to be pre-installed on certain Android tablets for my users that wil Somphone software use to limit the use of the tablet to a few parameters and select applications. My concern is that if a user taps on then archive in my application they wil not be able to download the folio again due to the restrictions of the device, so disabeling the button archive would be the answer.

  I just request if this is an option, or even possible. We use a professional account DPS.

  Thanks for any help.

  John.

  You cannot delete the Archive button in the standard library.

  You can rename the button Archives using the option of custom in DPS App Builder strings, but I don't know if it will help in your situation.

• Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  I mean ' diskutil cs * " and so on..."

  Yes, you must use the resizeStack command. Please see Re: how to repair fsck "your drive could not be partitioned..." Bootcamp does not as an example.

• Is it possible that a button "check for updates" can be added on the update tab rather than wait for Thunderbird in the background, check it please?

  I'm not always able to 'catch' the update notification popup when it arrives, and I do not wish to allow the automatic updates without my permission. I have a rather 'sensitive' situation of the internet. Would it not possible to add a button on the tab updated to allow us to check the updates manually please? This would greatly help my situation.

  Thank you for your time

  Baseman

  When the menu bar is not the AppMenu button to access the menu bar items. Some people also call the menu "Burger" in the upper right. Unfortunately, the corresponding support article is gone.

  It would make not much sense for me to put a "Find updates" button in the Update menu tab, but that's just me.

  Please mark it as "resolved" when your problem is actually solved.
  
  Thank you.