Is it safe to use the Sony Mavica older NP-FM50 battery in my camera Sony A-58?

Similar Questions

• How to use the sony hdr-XR160 for a video stream live

  Im trying to use the Sony HDR-XR160 for a video live feed to the internet, but can't seem to find out if this is possible.

  The camcorder has HDMI and A / V output connections. Depending on your computer, you can connect the camcorder to a HDMI IN and A / V in port. Once connected, you can start streaming using the appropriate software. Please see the manual for more information on the available ports, you can use your computer operating.

  Please note that USB streaming is not supported by this unit.

  If my post answered your question, please mark it as "accept as a Solution.

• How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with the Sony Support, their online documentation and drivers (update or reinstall).
  and their forums.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot install SP2 after you use the sony recovery disk.

  After Reformatting drive C using the Sony recovery disk, I am not able to download windows SP2 successfully.  Is there a code number I should be go in first.  Windows XP was already preloaded.

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW to get a computer running slot than WinXP SP1 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

• How do you use the Sony NEX 5R as a webcam for live streaming?

  My computer does not recognize my camera as a source for Google Hangouts.

  Digital cameras from Sony, including the Sony NEX - 5R, are not compatible for use as a Webcam. If you are interested in a camera that can live streaming, then the HD camera live Bloggie MHS-TS55 is a good option. You can check it out by clicking on the link below:

  http://store.Sony.com/...ductId=8198552921666415574

  If my post answered your question, please mark it as an "accepted Solution".

• Is it safe to use the same GUID to validate a global event?

  Hey everybody,

  I write a global event of a library project that I set up in my main application. Everything works fine. However, I'm wondering whether or not it is a good idea to always use the same GUID, or if I should generate a new to each one time? If I generate a new one every time, I don't know how I can have the control of the main application to see what GUID to search, as it would be generated in the library project...

  manager.postGlobalEvent(pid, 0xCAFEBABE, 0, 0, null, null);
  

  public void eventOccurred(long guid, int arg1, int arg2, Object arg3,
              Object arg4) {
          if (guid == 0xCAFEBABE) {
              authorize();
          }
  
      }
  

  Thank you!

  I think that if the events then report the amount of the fine to use the same GUID with different arguments.

  For example:

  public class Events {
      final public static int EVENT_AUTHORIZE = 1;
      final public static int EVENT_OTHER = 2;
  }
  

  manager.postGlobalEvent(pid, 0xCAFEBABE, Events.EVENT_AUTHORIZE, 0, null, null);
  

  public void eventOccurred(long guid, int event_type, int arg2, Object arg3,         Object arg4) {        if (guid == 0xCAFEBABE) {                    switch(event_type) {                     case Events.EVENT_AUTHORIZE:            authorize();                        break;                    case Events.EVENT_OTHER:                        doSomethingElse();                        break;                    }     }
  
     }
  

• Is it safe to use the Alienware 15 "closed on the side?

  I am considering getting portable stand containing a laptop computer closed on the side.  Is this desirable? Will this affect the cooling of the laptop at all? I intend using its closure when I use the graphics amplifier.  This will allow me to put my two laptops side by side, taking up less desk space.

  As long as you get m2 disk or an SSD, you should be fine.

• Z50-70: it is safe to run the AC adapter / CC with no battery?

  As the thread title says, is this safe that run the laptop of the electric network powered AC adapter without the battery installed?

  I rarely need to run on battery alone, and keep the battery at 100% load is not good for her, so I prefer to take the battery but I am afraid that it may have a role in the stabilization of the power supply. I note that the output voltage of the adapter is 20V, i.e. > 5V above the battery voltage.

  Alec_t wrote:

  Thanks for the reply. I have not been able to find a setting to limit the battery charge to 60% (or any other percentage!). Do you know how to access this setting? I'm under Win10.

  Try Energy Manager of Lenovo. You have such an option.

• Is it safe to use the slightly more powerful charger?

  Hello!

  I recently bought an FM transmitter for my car and on its side it has a USB port for loading, which is rated at 5V, 2.1 has. Since the carger I got in the box with the phone is 5V, 0.55 A, I would like to know, if the phone to such a current loading would damage the battery? In other words if it is safe or should I avoid it?

  Thank you.

  No problem. Phone won't take what he can use.

• is it safe to use the PdaNet 3.02 android app?

  has anyone ever used their phone's wi - fi signal to go on the internet with their computer?

  Please reask it work on a forum Android. Windows is not Android.

• This is the app, "Permanent Eraser" safe to use on OSX?

  OSX 10.11.6 not having Secure Empty Trash option, is safe to use the App: Permanent Eraser to delete files? I'm afraid that this may damage other files on my MBP.

  Thank you

  Joe

  Secure erase is not necessary if you use FileVault to encrypt the drive. In addition, do not use any fix erase secure on an SSD.

• I can't turn on all devices at once using a SONY RM-VZ320?

  I can't turn on each device individually by the device, and then click the power button, but it forces me to turn on the TV, Tuner, cable box individually. Other remote controls allow you to toggle all devices at the same time... Is there a way to turn on all devices at once using the SONY RM-VZ320?

  
  

• Can I load MDR100ABN listener using the charger that comes with mobile phones

  Can I load MDR100ABN earpiece with charger that comes with mobile or camera DSC-HX90V

  Hello, ss2016!

  It is recommended to use only the USB cable provided with the product itself. But if it is a Sony USB cable, then it should be all right. I load all my Sony products with different cables Sony too (as long as the load cables shown in the port of loading of the product), and there is no problem. They all work very well. No problem whatsoever. I never use another cable other than a charge cable Sony with my Sony products. If the is a charger for Sony, there should be no problem using it as a charging cable. Make sure that it fits into the port of loading of the headphones. The DSC-HX90V is also a Sony product, so it shouldn't be a problem using the Sony camera cable to charge your Sony headphones. In other words, make sure you only use cables from Sony to charge Sony products. (But we must ensure that the cable Sony fits into the Sony product)

  Best regards

• some computers cannot acquire images using the PCI-1410

  I have a big problem in the acquisition of the images using the PCI-1410.

  It was a standard camera (SONY XC-ES). The test of the device is OK with my computer.

  I can not get a correct image via MAX. Also, I try to use the file of the camera for that camera.

  But it did not work properly.

  I consulted it toward the Korea of NEITHER and they discover THAT PCI-1410 worked properly with different computers.

  So, I try to change PC. Most of my computers cannot acquire the image even if the unit is OK of MAX.

  However, only a few computer works properly. (Work computers are from SAMSUNG. The other

  computers that did not work propely, were assembled in the lab.) (I have tested almost 6 computers for this purpose.)

  The problem is that there are at least 3-4 PCI ports for our applications. The work computer (SAMSUN) only has 2 ports PCI.

  What should I do to select the right computers? I can't buy dozens of computers to test the PCI-1410.

  Why is this kind of problem occurs?

  Thanks in advance for your advice. (Email: [email protected])

  Hello

  We also had a lot of problems in the past with different PCs and the problem came from the motherboard. Since that time, we only use motherboards with intel because we know that labview works very well with them.

  It was 2 or 3 years ago, and I thought that the problem has been resolved since then... you know the type of motherboards you use?

• is - it safe to replace the old adapter 65W, 18.5V 3. 5 with the new adapter 65W, 19.5V, and 3.33 has...?

  Can I replace my

  old adapter 65W, 18.5V, 3. 5 has with

  new adapter 65W, 19.5V, 3.33 A

  for my Presario V6000 laptop

  Serial number HP: V6316TU

  p/n: GJ135PA #ACJ

  S/n: CNF7222J78.

  Is it safe to use the new adapter with + 1V and difference Amp?

  Bhavesh3e wrote:

  Can I replace my

  old adapter 65W, 18.5V, 3. 5 has with

  new adapter 65W, 19.5V, 3.33 A

  for my Presario V6000 laptop

  Serial number HP: V6316TU

  p/n: GJ135PA #ACJ

  S/n: CNF7222J78.

  Is it safe to use the new adapter with + 1V and difference Amp?

  Hello

  I read a few articles about it and it will work. However, you need to keep an eye on overheating. When it's too hot, I'd rather swich back to the old adapter or a replacement with the same characteristics. EBay is full of them, and some of them are even of real Chargers HP.