Is it still possible to put the URL bar on the front?

Similar Questions

• Is it still possible to get the 64-bit Windows Vista support?

  Hello!

  Well, I have a copy to authentic detail, under license of Windows Vista Edition Home Premium. He put 32 bit media. But at the time when Vista comes out, I could order the 64-bit Vista Home Premium support which I use today with the same license key that came on the parcel.
  About a year ago I bought the Windows Vista Express upgrade, which is valid for a Home Premium to Ultimate upgrade. But the disk is 32-bit only! So, I was wondering if it is still possible to get the 64-bit separately, support only this time, for the edition of Vista Ultimate? I ask this question because I would like to upgrade to Vista Ultimate, but still run on 64-bit, since I can't spend 64-bit Home Premium to Ultimate 32 - bit.
  I know that it may be too late now, given the fact that Windows 7 is already out and Windows 8 is in its phase of consumer preview now. But I am not really interested in upgrading to one of them at this stage. All I really want is just to upgrade to Vista Ultimate, but I need the 64-bit support, since I already have the license key.
  Maybe that Microsoft may allow me to download an ISO image of the Vista Ultimate 64-bit? That would be good enough for me, I don't care for the physical disc, it is not really necessary. I could get some pirate site or something like that, since I already own not one but two licenses, but I don't want that.
  Thanks in advance!

  The disks are probably non-destinee resale and this may explain the color.

  The Express Upgrade product key is specific to an upgrade from Home Premium to Ultimate.  The product key with the expedition is probably a full license key.

  > By 'Matrix Vista upgrade', you mean upgrading one bit-version to the other, like 64-bit to 32-bit or 32-64, right?

  N ° upgrade matrix tells you if an upgrade installation is allowed or a custom installation is required when moving from one edition of Windows to another.

  > Also, if I use a key Vista Home Premium that I have today to install Home Premium and then upgrade to Vista Ultimate, what happenes to my old key? The old key become invalid/replaced by the new key that I got the update? I mean where I want to go back to the old edition, I've had to go back to Vista Home Premium, I reuse this old key?

  You can use the old key to return to the old edition.  However, you can not use the key to install the old edition on a different computer.  The old key is bound to the key to upgrade.

  > "" If a user is running a 32-bit version of Windows, a user can only be upgraded to another 32-bit version: upgrade from 32 bit to 64 bit requires a clean installation. ""

  Now you are confusing a "install update" with an 'upgrade license '.  A retail upgrade license is valid to move from a 32-bit edition to a 64-bit edition, but an upgrade installation is not allowed and a custom installation is required (due to the change in the number of bits of the installation).

   
  > And now Microsoft will probably speed up the versions of Windows, with new versions coming out every two years or more, or has done.
   
  Not true.  Microsoft has been on a cycle of three years for a long time.  There is no speed upward.  Vista has been delayed for two years, when Microsoft declared a moratorium until security problems in Windows have been fixed (XP SP2 was the result).
   
  > I don't know about Windows 7. I don't know if I'll get it or wait for Windows 8. I hear a lot of misfortunes for Windows 7
   
  I don't know where you got this info.  Windows 7 is much better than Vista or XP.  Vista is the one that is panned by critics as a real dog.  Try Windows 7 and you will never look back.
   

• I have an old Presario SR1909UK is still possible to upgrade the processor and if so with what?

  I have an old Presario SR1909UK is still possible to upgrade the processor and if so with what?

  AM2 are listed here:

  http://support.HP.com/us-en/document/c00714578

• Still possible to buy the first Pro CS6

  Hello.

  Is it still possible to buy the first Pro CS6 version, or is the only option to subscribe to the CC? -Prefer a lump sum instead of a running...

  From what I read in a forum message, newer than 10.7 Mac must subscribe in the cloud instead of buy CS6... and someone with Win10 must also subscribe to the cloud for CS6 is not compatible (meaning that the seller will ask you your operating system and not sell you CS6 if she does not work on your computer... I don't know if this means that Win7 and you can't buy if you have Win8)

  Please report back with your operating system if you are able to buy CS6

• It is possible to change the front in a textbox

  For Acrobat Reader.

  It is possible to change the front in a textbox control. I think that to change the color, size, and type. It seems that it is only possible to change the properties of the image/box. How can solve this problem - I think it was possible in older versions.

  I am looking forward to hear from you.

  Best

  Thomas

  Select the text and press ctrl-e.

• Is it possible to put the files in drive J on the C drive?

  By transferring data from XP again Windows 7, provided about my Outlook seems not to have been transferred using the Easy Transfer Wizard, so I downloaded the missing data on a disc of J.  In order to put in my Office Outlook, he needs on the C drive in my new computer, it's a .pst file.  Is it possible to transfer the info from the j to the portion of the C drive that has other transferred Office Outlook .pst files?  If so, how?

  Thank you.

  Open Outlook
  Click on the file tab
  Click on Open & Export
  In the main window, click on Import/Export
  In the wizard import / export , click import from another program or file
  Click Next
  Click Outlook Data File (.pst)
  Find and select the file .pst on your drive J
  Select one of the options three import
  Click Next
  Click Archive Folders
  Check include subfolders
  Select one of the places two import
  Click Finish
  You have completed

• Is it still possible to bend the straight line by dragging in CS6?

  I was watching a tutorial on the tool pen to see if it was possible and found this:

  Otherwise, click and drag to halfway along a path to manipulate as a curve.

  

  However, I can't replicate on mine. This feature is still possible in Illustrator CS6? If so, how?

  You will need a plugin to do this to the CS6.

  For example, try VectorScribe or XtreamPath

• Is it possible to put the results of a query in a variable to use in the bean class?

  Hello, I am using JDeveloper 12.1.2.0.0

  I like to keep the result of my queries (the method that I created in the AppModule) in a richeTableau or another type of variable, so I can get results and I don't have to make unnecessary after queries. I don't think that the query is the problem but keeping the results.

  I tried to do in using this:

  public String testVFactSales (String conditions) {}

  PreparedStatement query = getDBTransaction () .createPreparedStatement ("" + "select * from v_fact_sales"+ conditions, 0 ");

  ResultSet rs;

  Outcome of the result set;

  Result of the richeTableau;

  String result = null;

  try {}

  query.setString (1, conditions);

  Query.Execute ();

  Query.Execute ();

  result = query.getGeneratedKeys ();

  Query.Close ();

  System.out.println ("result:" + result.toString ());

  return result.toString ();

  } catch (SQLException e) {}

  e.printStackTrace ();

  }

  Return ' ';

  }

  As you can see, I have already tried a few solutions, but so far I have only errors (cannot convert or null exception, when I try to put the result in a richeTableau in my bean class)

  Any ideas?

  It is very important for me, because it would improve the performance of my project a lot.

  Kind regards

  Frederico.

  Although the issue is not 100% responded, I used the idea that Shay told me, where you can create a method in your AppModule to set your where clause!

  Good luck to everyone who has the same problem.

  As an attack similar to what I wanted in the first place, you can check this:

  https://community.Oracle.com/thread/2619669

  Kind regards

  Frederico.

• is it possible to use the front panel without installing Labview?

  Hallo,

  I have two quick questions:

  1. is it possible to use the façade of a labview software without the need to install Labview itself? I mean something similar to the "power point viewer" that can display Power Point files without installing microsoft office.

  2. in a graphic intensity, how can you change the color?

  Thank you.

  Hello

  What you need to do is

  (1) turn off the interpolation color option

  2) click Add marker, which will add the marker where you want to add

  (3) then right click on the digital value for the marker, you created and you will see the tag, saying: "Color of the mark". Select the color you want.

  In one example, I created values 77 and 23 markers and their red and gray Cap. Hope this helps

  Concerning

• Is it possible to put the property inside the loop node?

  I created three nodes of separation of property (color graphics) for my 3 XY graphs.

  Is it possible to have a property node, put this tag inside the loop where I ranges from 1 to N, and say plot_color_i

  where plot_color_1 would update 1 XY graph, plot_color_2 update XY Graph 2, etc. ?

  See the attached VI.

  Yes.  Create an array of references to the XY graphs and have this auto-index in the property node in the loop For

• Is it possible to put the speakers as the default output for the sounds of Windows and the headset as default device for music?

  Hello

  Is it possible to have all the sounds through the speakers, including music from WMP and WMP music in my headphones? Headset is USB (but I also have a Jack) and my speakers are with 3 Sockets at the back of my pc.
  Thank you.
  Friend,
  Zoenvisje
   
  Original title: all sounds through loudspeakers and music through headphones

  Hi zoenvisje,

  Thanks for posting your query in the Microsoft Community.

  Want to know if it is possible to play any sound on the computer with the headset. It can be difficult when something that is important to you does not work as expected.

  Method-

  It is not possible to make these changes on the computer.

  You can set a default speakers and use a different music player that supports select the default output as the headset device.

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• [Advanced] Is it possible to put the IP Address of the default gateway for a vmnet NAT?

  I am trying to duplicate a computer lab on my Mac environment, and I need the bridge will be located at one address other than VMWare wants to implement.  I know how to create a static IP address for a virtual machine, but I need adjust the routers option in Library/Preferences/VMWare Fusion/vmnet2/dhcpd.conf.  Will there be a networking Library/Preferences/VMWare Fusion/to allow this?  Is there something I can put before or after the "DON'T CHANGE" section dhcpd.conf that replace the parameters in this section?

  Except that, is there a way to prevent the re-writing of the dhcpd.conf file after I made a change to VMWare?  I tried it wrong in various ways, including the re - generate the hash SHA1 of the networking file and reset the modification time of the dhcpd.conf to the original time, without success.

  Here are my current settings:

  subnet 10.10.0.0 255.255.0.0 subnet mask}

  range 10.10.128.0 10.10.255.254;

  option broadcast-address 10.10.255.255;

  option domain-name-servers 10.10.0.2.

  option domain-name localdomain.

  by default-lease-time 1800;                # default is 30 minutes

  Max-lease-time 7200;                    # default is 2 hours

  option netbios-name-servers 10.10.0.2.

  routers option 10.10.0.2.

  }

  host vmnet2 {}

  Hardware ethernet 00:50:56:C0:00:02;

  fixed-address 10.10.0.1;

  option domain-name-servers 0.0.0.0.

  option domain-name ";

  routers option 0.0.0.0.

  }

  And I'm changing the gateway to 10.10.0.2 to 10.10.1.250.  Maybe VMWare requires that the first IP address as the host and the second either the entry door and rewritten if not?

  Thanks in advance,

  Dave

  I found a way to do this.  Not sure if it's official, or if it will continue to work in the future.  In addition changes nat.conf, if you simply duplicate the part of the section "DON'T CHANGE" dhcpd.conf below, then the second version of the settings will cancel and replace the first.  Here is my solution:

  # Configuration file for ISC 2.0 vmnet-dhcpd operating on vmnet2.

  #

  # This file was generated automatically by Setup of VMware.

  # See Instructions below if you want to change.

  #

  # Define us domain-name-servers to satisfy some DHCP clients

  # (dhclient such as configured in SuSE, TurboLinux, etc..).

  # We also provide a domain name to the pump (Red Hat 6.x) happy.

  #

  # VMNET DHCP Configuration. Beginning of "DO NOT EDIT ARTICLE" #.

  # Instructions change: this section of the configuration file contains

  # News generated by the Setup program. Do not change it

  # section.

  # You are free to change to everything else. In addition, this section must start

  # on a new line

  # This file will get saved under a different name in the same directory

  # If this section is edited and you try to set up DHCP again.

  # Written on the: 04/11/2015-21:15:15

  allow unknown-clients;

  by default-lease-time 1800;                # default is 30 minutes

  Max-lease-time 7200;                    # default is 2 hours

  subnet 10.10.0.0 255.255.0.0 subnet mask}

  range 10.10.128.0 10.10.255.254;

  option broadcast-address 10.10.255.255;

  option domain-name-servers 10.10.0.2.

  option domain-name localdomain.

  by default-lease-time 1800;                # default is 30 minutes

  Max-lease-time 7200;                    # default is 2 hours

  option netbios-name-servers 10.10.0.2.

  routers option 10.10.0.2.

  }

  host vmnet2 {}

  Hardware ethernet 00:50:56:C0:00:02;

  fixed-address 10.10.0.1;

  option domain-name-servers 0.0.0.0.

  option domain-name ";

  routers option 0.0.0.0.

  }

  # VMNET DHCP Configuration. End of "DO NOT EDIT ARTICLE" #.

  subnet 10.10.0.0 255.255.0.0 subnet mask}

  range 10.10.128.0 10.10.255.254;

  option broadcast-address 10.10.255.255;

  option domain-name-servers 10.10.1.200.

  by default-lease-time 1800;                # default is 30 minutes

  Max-lease-time 7200;                    # default is 2 hours

  option netbios-name-servers 10.10.1.250.

  routers option 10.10.1.250;

  }

  -Dave

• pl/sql is it possible to put the cursor in where clause?

  Hello
  
  I have this stored proc that works very well when it is passed a single ID... now he must pass a list of IDS as in
  function (cursor (select id from table))...
  
  
  its definition is like this:
  RETURN ACTIV_PKG.tADR_ACTIV PIPELINED IS function ADR_ACTIV (pi_NO_SEQ IN sys_refcursor)
  CURSOR c1 (p_NOSEQ IN sys_refcursor) IS
  WITH Lateststate AS
  (SELECT RESUM_ETA.NO_SEQ_CLE_PRIM NO_SEQ_ADR,
  ADR.NO_SEQ,
  RESUM_ETA. COD_ETA
  OF RESUM_ETA
  JOIN INTERNAL ADR
  ON ADR.NO_SEQ_ADR = RESUM_ETA.NO_SEQ_CLE_PRIM
  WHERE RESUM_ETA. COD_TBL = "ADR1".
  
  and IN ADR.NO_SEQ (p_NOSEQODS)
  
  
  )...
  
  You see that 'and ADR.NO_SEQ IN (p_NOSEQODS)' lines using only those on the list filters...
  
  the idea is to use the cursor c1 like this:
  BEGIN
  FOR rec1 IN c1 (pi_NO_SEQ)
  LOOP
  ...
  
  Except that I get an error with (p_NOSEQODS) because it is not supported...
  
  y at - there a trick to this?
  
  Should I use table instead of cursor in where clause IN (...)?
  
  
  I have not in a list of IDS and put it in where clause of my cursor c1... How to get there?
  
  Thanks for the advice/links
  
  See you soon!

  the idea is to use the cursor c1 like this:
  FOR rec1 IN c1 (pi_NO_SEQ)

  Don't know if it's really less awkward that solution regexp, but we here are:

     cur   sys_refcursor;
  
     cursor c2 (cur sys_refcursor)
     is
        select   *
          from   emp
         where   empno in (select   trim (t.column_value.extract ('//text()'))
                             from   table (xmlsequence (cur)) t);
  begin
     open cur for
        select   7788 from dual
        union all
        select   7900 empno from dual;
  
     for c in c2 (cur)
     loop
        dbms_output.put_line (c.ename);
     end loop;
  end;
  /
  SCOTT
  JAMES
  PL/SQL procedure successfully completed.
  

• Is it possible to put the words in bold or underline things in email in thunderbird?

  When you send a note with the name of the books for example, I would like to highlight the name of the book which is the right thing to do, but I can't find anywhere in Thunderbird where I can use this option. Also, I can't find how to use italics or bold to emphasize something. Please notify. Thank you. Billie Matelski

  Perhaps you composed in HTML.

  Right-click on the account, in the folders pane, select settings and in composition and correct select compose in HTML.

• Is Lenovo ThinkPad X220t 4294-CTO, possible to put the backlit keyboard in this machine?

  Hi once again, everything

  My question is the same as the topic

  Best regards.

  No, sorry.

  backlit keyboards come as an option on the T/X/W x 30 models. What are the 6 precision keyboards ranks Island-style and are not backward compatible models the x2x.

  HTH to clarify.