Is it still possible to use Microsoft Points in the store of Windows 8?

Similar Questions

• Is it possible to use Microsoft Money on a mac laptop?

  I think of buying my first mac laptop.

  Is it possible to use Microsoft Money on the mac?

  Install Windows on your Apple computer then any program that runs on Windows. Windows can be installed using Boot Camp Assistant or using a machine virtual Parallels, Fusion, or VirtualBox.

• It is not possible to use "Show pointer" on 7-inch screens.

  It is not possible to use "Show pointer" on 7-inch screens. The second pointer on the left, who would normally stimulate the ALT is not visible. The pointer is hidden behind the left hand tool bar! I use Photoshop Touch on a 7¹³ of Nexus and I, it's a great software and it became even more impressive if that problem is fixed ;-)

  I can't repro this on my Nexus 7 2013 I can see the 'hold' in the bottom icon to the left, but it is a bit hidden by the icon 'redo '. I can still tap to finish the operation, even if I can do it again.

  I was also able to get around by touching the icon screen, 1st icon from the upper right. This allows a full view of the "hold" icon

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible for first Pro CC hide the automatic backup window

  Is it possible for first Pro CC hide the automatic backup window, without turning off autosave function?

  When such a device is save you wonder why you wouldn't be able to do everything that is the case in the car.

  I'm guessing you want automatic backup in the background?

• is it still possible to use I have Message between 9 and 10 IOS iOS

  my girlfriend has an iPhone 4S and we use iMessage much, I have an iPhone 6 s.

  is it still possible to message between iOS iOS and 10 9?

  Because the updated did a lot with this soft...

  I want to know this before the update

  Yes

• Is it possible to use WCM open to the third-party application J2EE jsp tags?

  Hi all
  
  Is it possible to use tags jsp WCM opened in the third-party J2EE applications that are deployeed on websphere or tomcat? I have a client who want features WCM port such as onlin edition on their application WAS? Any suggestions? Thank you very much.
  
  
  Kind regards
  Joe

  Hello

  You can use the WCM_PLACEHOLDER function to display the content of the definition of the region and the data file on any 3rd party portal.

  To call the contributor of the 3rd party portal you can use WCM_BEGIN_EDIT_SESSION service.

  These services work for SS - Designer based on sites and site elements.

  Thank you
  Srinath

• Is it possible to use vSphere replication within the same site?

  Hello

  I was wondering if I could use vSphere replication in the same data center. The idea would be to have a configuration without shared storage appropriate for HA.

  Thank you!

  elgreco81

  Yes, it's not a problem at all. You can have a single unit of replication running and replicate to another data store.

  André

• Boring square around the pointer of the mouse in Windows 8

  Original title: boring square

  Our kitten sitting on the keyboard and now there is a square around the pointer of the mouse that I can not understand how to make it go away.  Windows 8.

  Hi Lesandru,

  What is the brand and model of the computer?

  It seems that the mouse settings should be changed, follow the steps below and check if this solves.

  (a) press the Windows key + X, select Control Panel.

  (b) Select mouse

  (c) in the Windows mouse properties, select the pointers tab.

  (d) select the Normal pointer.

  (e) click OK and apply.

  Let us know if you still face the question.

  See also section below.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Feel free to answer that if the problem persists, we're here to help.

• Is it possible to install several facilities of the database on Windows?

  Hello world

  I have a Windows Server 2008 with Oracle 11 g R2 (11.2.0.3, Standard, 64 - bit) database. I need to install an additional database (11.2.0.3, Standard, 64 - bit) for tests on the same server. These tests are patches of database, which will first be applied to the new database before applying these fixes on the existing database, in order to assess potential problems after having patched.

  I'm used to install, configure and manage databases Oracle as a stand alone, RAC or physical standby via the DataGuard since 9i - as long as I'm in a UN * x / linux environment (Red Hat Enterprise Linux, CEntOs, Oracle Enterprise Linux, etc.). Implementation of multiple instances in a single or multiple homes has never been a problem for me so far.

  I already searched google, oracle.com and other related proceedings. But I have found no results on the installation of two or more homes to Oracle under Windows. I found the guidelines on copying / cloning an instance in a new home, but if I remember correctly, it is intended for copying / cloning on other servers and not on the same server. Given that the existing database is installed on Windows, I'm afraid I can damage the existing installation to rerun the configuration wizard, change the registry values for Windows, and the database running as a service.

  Is it possible to have several houses of the same Oracle database, with even the version, edition, and the archiecture (11.2.0.3, Standard, 64 - bit)?

  If so, how can I get it?

  Best regards

  Crazy bytes

  You can run the Setup utility again and specify a different Oracle home. In fact, the installer can provide a different name automatically for you. It's been a while since I've done it, so I'm a little fuzzy on the details. How the two facilities are managed by different registry settings, such as ORACLE_HOME0 and ORACLE_HOME1.

  Another caveat is that when the management of these cases, make sure you start the utilities for each database to its respective home. So, in the menu start, you choose tell SQL * menu Dbhome1 more to manage a single instance and SQL * in the menu of dbhome2 to manage the other instance. It's so environment variables get ready properly before the application starts.

  "Here's another link to the documentation for you on this topic: http://docs.oracle.com/database/121/NTDBI/intro.htm#NTDBI2648 "

  "2.3.4 multiple homes to Oracle Support.

• Why Microsoft has disabled the updates of windows 7 pro 32 bit servers?

  I have reinstalled Windows 7 Professional 32-bit service pack 1 on a clean, wipe the hard drive, nothing else than Windows. It enabled and verifies that Microsoft authentic with the MGA tool. Stop the windows firewall and close my routers firewall. I can download Microsoft Security Essentials, to access this web site and all the others so I have web access. I went through all the posts related to windows update and taken EVERY step! Unable to get windows update to update the OS, it returns an error 8007000e.  Two different computers with exactly the same problem a third with Windows 7 64 bit without problem.

  Microsoft must have close update for Windows 7 pro 32 bit servers... WHY?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• Try using Microsoft Picture It! Publishing in Windows 7. When you try to start a new project or use the Save function under get the message "Windows has stopped working".

  Microsoft Picture It 2001 software installed in Windows 7.  Program will show a project that I recorded in Windows XP that I upgraded to Windows 7, but it wont let me save the project under a different name.  The program does not let me start a blank project.  I get the error message "Picture It! has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. "Windows did not close the program and did not warn me of a solution.

  Microsoft Picture IT is not officially compatible with Windows 7. Microsoft's picture IT was abandoned and has been replaced by Windows Live Photo Gallery. You can download Windows Live Photo Gallery for free and install it on Windows 7, but there only basic editing features.

  Windows Live Photo Gallery:
  http://www.windowslive.com/desktop/Photogallery

  Two editors of the most popular free photo with many features are related to the Sub - between the two programs Paint.NET will be easier to use.

  Paint.NET
  http://www.getpaint.NET

  GIMP
  http://www.GIMP.org/downloads

  You can also use the built-in photo editing Paint program. To open Paint, click the Start button, click programs, accessories principally made, and then click Paint.

• Still valid to use FileJournalListener to capture the image of the camera in 6.0?

  I'm having a problem with a screenshot of the app native camera on JDE 6.0 and the 9800 Simulator.  I use the old 'good practices' referring to the native camera app and save a FileSystemJournalListener:

  {Synchronized (UiApplication.getEventLock ())}
  UiApplication.getUiApplication () .addFileSystemJournalListener (this);
  Invoke.invokeApplication (Invoke.APP_TYPE_CAMERA, new CameraArguments());
  }

  When I get a FileSystemJournalEntry.FILE_ADDED, I get the file and encode it.

  Public Sub fileJournalChanged()
  {
  next sequence number file system will use
  Long USN = FileSystemJournal.getNextUSN ();
          
  for (long I = USN - 1; i > = lastUSN & I)< usn;="">
  {
  Entry FileSystemJournalEntry = FileSystemJournal.getEntry (i);
  If (input == null)
  {
  break;
  }
              
  If (entry.getEvent () is FileSystemJournalEntry.FILE_ADDED)
  {
  Path String = entry.getPath ();
  If (path! = null & path.indexOf ('.jpg')! = - 1).
  {
  We found a new JPEG image, treat it
  String result = processImage ("file://" + path);
                      
  clean
  closeCamera();
                      
  break;
  }
  }
  }
          
  do not forget the change log file number,
  If we do not find the same events over and over again
  lastUSN = USN;
  }

  The problem is that the Torch 9800 Simulator choke on it.  "I get randomly ' JVM error 104: Eception: OutOfMemoryError.  I say randomly because sometimes after taking pictures of 3-5 successfully, and sometimes it pours on the first attempt to photograph.  I've cleaned many times Simulator.

  The same code works perfectly in 5.0 simulators (9550, 9530).  I can take pictures until I'm blue in the face without an exception OutOfMemoryError.

  I saw this method of capture an image (using the MMAPI implementation)...

  Take a photo in an application device of BlackBerry - Multimedia - Development Guide - BlackBerry Java...

  .. .but I want the user to be able to have the user of the native camera of experience.  Therefore, listen to JPG file was added.  Is it still valid in 6.0?  It is, of course, to some extent, or my photo app would not work.  Is there something with log being numbered differently?

  The FileSystemJournalListener is not the problem.

  The exception OutOfMemoryError seems to be related sending images of native Java coding to JavaScript.

  Only one problem in 6.0.

• When using Microsoft Flight Simulator, the Simulator just crashes from time to time and blamks outside.

  Ask helps solve crashes during flight simulator

  Hello

  ·         What version of Microsoft Flight simulator do you use?

  ·          You get the error message? If Yes, what is the full error message?

  I suggest you follow the steps in troubleshooting section below and check if it helps:

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

  Hope this helps

• Is it possible to use EAS to manage the planning of the Dimensions and the members?

  Our Organization is still under implementation of the planning and implementation partner said that you can not use EAS change members because it would cause problems and I want someone to verify this, because I have little hard to believe.  I mean, using workspace is so awkward to edit members while eas is much easier and really tempting for me to try, I don't want to screw up anything.

  Any input is greatly appreciated,

  Bret

  Yes. It is not best to use EAS to change members / any changes to metadata

  Planning is as a web based tool for planning/preparation of the budget having Essbase as a backend database and all the metadata is stored in a repository of the relationship (of planning) and are pushed into Essbase (where your data is stored).

  If you use Web Forms / has all the planning, and if you make changes to members directly in environmental assessments, it is reflected in planning and it is always advisable to not make changes directly from EAS.

  If it's just one / two Member changes then I would directly in the planning of the workspace. If there is a set of members then I prepare a file and then run it using contour load utility

  HTH

  Amarnath

  ORACLE | Essbase