is my function of co-dependency on my removed switched phone modem.no lights on the port, ethernet port net connect.

Similar Questions

• Is there a way to disable the function where firefox opens a new tab when you scroll a click in the header bar?

  Is there a way to disable the function where firefox opens a new tab when you scroll a click in the header bar? This feature in conflict with my program of multiple monitors (display fusion) since this program allows you to change your current active window the monitor 1 monitor 2 and vice versa BY clicking the header of BAR SCROLLING (or whatever you call the highest part of your window). With firefox, I can't easily change my active window between monitors because instead, it opens a new tab.

  If the window is maximized, you can then switch this pref to disable the display of the tabs in the title bar:

  • browser.tabs.drawInTitlebar = false

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• error: implicit declaration of function 'GetActiveProcessorCount' is not valid in C99. Make sure that you include the prototype for the function.

  I get the following error:

  error: implicit declaration of function 'GetActiveProcessorCount' is not valid in C99. Make sure that you include the prototype for the function.

  I've included windows.h

  which includes winbase.h

  Winbase.h contains the prototype for the function in the above error message.

  If I disable 'Require the function prototypes' and 'Building with the C99 extensions', I get the following error:

  error: Undefined symbol "_GetActiveProcessorCount" referenced in "c:\Users\Public\Documents\National Instruments\CVI\HDLC\cvibuild. HDLC_RandD\Debug\HDLC_RandD.obj ".

  I work in the ICB 2013 SP2.

  Why I get this error.

  This function is only valid in Windows 7 and later versions. Because the ICB 2013 still supports Windows XP, this feature is excluded by default from Windows headers that are provided with CVI. If you do not need to worry about the versions of Windows prior to Windows 7, however, you can include it yourself, by adding the following macro in the dialog box options generation CVI (be sure to include for all configurations):

  

• BlackBerry 10 functions and features can not turn off my Blackberry Protect z10 after changing the password ID.

  My wife's phone was last updated the operating system more recent 10.3.2. I then tried to access a service and found when he asked for the Blackberry ID, we had forgotten the issue of password and user. Then I deleted the ID and set up a new. I can connect to the new identification, but he cannot confirm on the z10. Then I thought to wipe the z10 back to factory setting. However; the z10 shows that BB Protect is enabled and we cannot turn it off using the passwords that we try.

  I have logged on to the site of BB Protect and found there is no device associated with this Userid. Also, I find the screen for the current user ID name using our existing email address differs from the one showing on the screen z10 Blackberry ID. name I tried to change the screen name and password on the ID to be similar to the z10 site but it will not accept it.

  So now I'm unable to wipe the z10, or change the ID info to make it usable when required. I also noticed, online, there are instructions for the new OS 10.3.2 informing us that no wiping ability to Protect is disabled. There is no instructions on how to so that when a problem arises like mine.

  Help, please.

  I searched for a solution and I finally found one that works. It was posted by asokhay about a week ago and is as follows:

  "I found the solution!

  I connected my passport for Blackberry link and clicked on "back up and restore" in the left navigation tab. Then I clicked on Factory Reset. He asked me to unplug the unit and when I did the wipe of security has started to happen. "

  This works, however when I wipe the phone it took about 30 minutes. By reading this forum I found that some wipes can take several hours to complete depending on the amount of material is on the cell phone.  As I could not ' t register anything before this wipe I have to start over from the beginning. " Fortunately my wife added very little to the phone, such as applications or photos.

• How to activate the search function.  I get no match found when I search for words on the scanned PDF document

  How to activate the search function.  I get no match found when I search for words on the scanned PDF document

  A scanned document is just an image; even if it contains text, it is not searchable.

  Put text in a scanned image available, you will need to perform the recognition of text (OCR), which can be made with Acrobat, but not the free player.

• My Norton toolbar became deleted somehow. I need it for my Norton Internet security function Auto Fill will work. How can I get that back in the menu bar?

  My Firefox browser page to have a Norton Safe Search Bar within the toolbar area. He must be active on this subject otherwise the function AutoComplete passwords for sites Web I visit - who have need of my username AND password - is not populated automatically by the software Norton Internet Security 2011 that I have on my computer.
  My Question: HOW to make this search bar of Norton on my Firefox browser Page?

  I use Norton 360 institutions and would allow the two Add-ons of Norton (see below) when I upgraded to Firefox 8.0:

  • Norton Toolbar 2011.7.3.6; and
  • Symantec IPS 3.2.

  In your case, since you have used before, add-ons can still be installed, you should just allow them, as if I had to do. 8.0 Firefox automatically disables modules.

  To see if the modules above are still installed, you can:

  • go to \Firefox\Add-ons;
  • Click Extensions;

  .. .and you should find them there. If this isn't the case, you need to install. You can use the links that Daniel and the-edmeister provided above.

• Summary of functions (two entries) for classes of brother with a dynamic distribution of entry: the static entry retains the type of the parent class.

  Suppose that in a hypothetical example, I have a superclass (number) with two children (real and complex) classes.

  I would define a function of sum for these classes, using dynamic distribution.

  Real or complex would have its own method of the sum (VI) which would be subject to various operations, such as the real and complex numbers are different.

  As I understand it, the normal way to proceed in OOP is for each of these methods to have an entry of dynamic distribution and a static entry of its own type.

  Problem: Labview doesn't let me do this!

  I first define an input method dynamic-shipping dummy for the numberof the parent class, but only the first entry can be dynamic-Envoy while the other is statically typed as number.

  Then, when I create override methods in my two children classes real and complex, the second entry (static) remains under the number (the type of the parent class). This is not fair, because then I can't access the private data of the child class of type real or complex that will be connected to the second input (static).

  What is the solution to this problem (usually)?

  I think that, in LVOOP, you use only a dynamic terminal or a static terminal to the terminal object.

  You can have several other terminals, but all the dynamics VI (methods with the same name) must have the same API (terminals).

  If you have to understand your preferred mode to pass, use multiple terminals, not used by each method, or use a cluster that contains all the numbers to pass (real or complex, both of which are not used in each method) or you can try a Variant, as shown.

• What dependency service or group must be enabled for ICS start the firewall can be turned on

  Uninstalled BitDefender 2012 and installed Microsoft Security Essentials.  I tried to activate Windows Firewall and got: "Windows Firewall setting cannot be displayed because the associated service is not running. You want to start the Windows Firewall / ICS (ICS) service. Press Yes and I get Windows cannot start the Windows Firewall / ICS (ICS) service. This option is OK. Hit that and I will return to the window Security Center in Control Panel. Tried to manually turn on ICS and got error 1068: the dependency service or group could start. What service and / or the Group?

  It was more than a notice of an answer to the question I posted earlier to not be able to activate Windows Firewall once I uninstalled Bit Defender and installed MS Essentials.  Sorry that if I crossed all the protocols forum this is my second attempt to get a question an answer, luckly I kind of figured it by myself.  Thanks for the response if and the offer of future assistance.

  I you merge your two threads, but your problem is perhaps due to incomplete removal of BitDefender.

  -steve

• step by step guide to disable function keys F1 etc Windows 7 ultimate so that I can work with the FTW Transcriber to transcribe software. Thank you

  I want to disable the function keys of windows 7 because I want to work with hotkeys TRANSCRIBER, FTW software. You can guide me please. Thank you very much for your quick response.

  Hi Kripananda,

  What is the brand and model of the computer?

  The function keys are controlled by the manufacturer of the system. The changes must be made in the BIOS (Basic Input Output System). I suggest you to contact the manufacturer of the system to better support.

  Note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• How can I reduce the function 'FORWARD' when I send an e-mail to a version full screen the smaller original box?

  I use Windows Live Mail and initially when I used the 'BEFORE the MESSAGE' function during the transmission of an e-mail message a little box came and I inserted that I wanted to post to and comments and press the Send button.

  Recently I have dome something to change this, because now when I click the icon 'To FOLLOW the MESSAGE' box takes up the entire screen. How can I get that back to the smallest box.

  Thank you

  Click next and before you do anything else, close all other windows, including the main screen of WLMail and all the open windows in the taskbar.
   
  Drag the window to the size you want, and then close. Windows should remember the size of a window resized as long as it's the last closed.
   
  Windows Live Mail help is in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• I have the following error on my phone design-MuseJSAssert: error calling the function switch: Error: Invalid argument

  I tried to insert the third party html code 'a noaa weather map' in the design of my phone yesterday. It did not work well. So I deleted this return. Afterwords, I get the following:

  (Message on the Web page "MuseJSAssert: error by calling the function selection: error: invalid argument.")

  I already have all the design is complete and ready to publish. The desktop version works fine. But the design of the phone does not work. For the most part, I noticed that the menu master accordion does not work now.

  Help! I really want to redo the whole phone design. Thanks, H

  I have already found and corrected the error. Apparently, when you bind a phone

  Number of muse, he is not obliged to put a colon: in the figures. I have

  have removed the colon and handed over running the program and the error is cleared

  upward. A clear tutorial on the 'phone links' would be useful.

  Thank you. H

• function to set a default value for a column that is defined by the user

  Hi all
  
  Can use us the user-defined function to set a default value for a column?
  
  for example:
  

  create or replace  function test1  return number is
  begin 
  return 10;
  end;
  
  
  create table testt
   (id  as test1,
    name varchar2(20));
  
  error:
  ORA-02000: missing ( keyword

  Thank you
  Ashwani

  Ashwani says:

  Can use us the user-defined function to set a default value for a column?

  N °

  A trigger (this function call) can be used to implement such a feature.

• function/SQL to get the next weekend date of SUNDAY, in light of the current sysdate

  Hi all
  
  someone at - it a reliable piece of SQL or the function that takes the current SYSDATE as a parameter and returns the next date available weekend (SUNDAY)
  
  So for example if it is adopted as of today 01/07/2009 (Wednesday) it returns data 07/05/2009, which is the Date of Sunday following.
  
  Even if I went to Sunday 07/05/2009, it would go back the date 07/12/2009, which is this Sunday.
  
  Any help in advance apppreciated!
  
  Kind regards
  Satnam

  select next_day(sysdate, 'SUNDAY') from dual
  

  Good luck

• Hello ı have a problem with my phone ı cant get assistance from the Turkey you'd like ı cant me my phone and all functions does not work

  to whom it my concern

  my name is yusuf of istanbul

  I buy my phone 5 supports befor but the phone does not work and I can't phone me

  no body helps me to istanbul and people is treat me wrong here...

  So want you sell my theye problem don't chack the phone even if you please help me and send information of raphael

  I want to change my phone because I have 1.5 year warranty please inform me on the subject...

  Thank you in advance...

  Yusuf *.

  ******

  ******

  Where have you bought the phone?

• With iCloud Photo library function enabled, this means that photos taken with the phone are saved only on the cloud, not on the phone? Can I turn off the photo library feature and do not miss the photos on the phone?

  iCloud photo library

  These two articles should help answer your question and provide you with information on how iCloud library works with your iOS device:

  iCloud Photo library FAQ - Apple Support

  iCloud Photo Library help - Apple Support

  See you soon,.

  GB