Is the fix in the article 977323, the same as that mentioned in 974073?
I'm looking to correct some slowness on my AMD system based with AHCI enabled (Vista Ultimate 64, ASUS M4A79 Deluxe, 8 GB of RAM, 500 and 1 TB SATA disks)
After reading the two articles, they solve different problems.
974073: slows down due to journal entries deployed.
The update changes the Msahci.sys driver so that the driver does not call RecordExecutionHistory(), which is called repeatedly, as after each execution of the command. This copy activity may reduce the performance of the CPU AMD chipsets based because Msahci.sys saves entries whenever it is executed.
977323: 60 break when the AHCI driver detects no application i/o.
This problem occurs because of a race condition between the interrupt in the driver (Msahci.sys) AHCI handler and the disk device. Therefore, the AHCI driver does not detect some i/o requests are executed until the timeout Manager collects these requests 60 seconds later.
None of them appear to be specific AMD because Intel drivers listed for two patches.
You should read the articles carefully and only apply IF you are expereincing the particular issue described. You can look for problems with your Board from ASUS to see if this is a known issue.
I hope this helps Mark <> Microsoft Partner
Tags: Windows
Similar Questions
-
When I try to copy files to a CD, I get the message "Windows has encountered a problem when trying to copy this file." I press the button "Retry" without any result. I get the same message that I have click on 'Copy' files on a CD or drag the files to copy to the CD player. I was able to copy these same files to a CD a few days ago. Thanks for the suggestions.
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
1. don't you get an error code along with this error message?
2. what CD burning software is installed on your computer?
3. what kind of CD do you use to burn?
4. What is the status of the CD - DVD drive in Device Manager?Method 1.
Let us first check the status of the optical drive in the Device Manager. Check if there is no error code or yellow mark is listed.
Reference:
Explanation of error codes generated by Device Manager in Windows XP Professional
http://support.Microsoft.com/kb/310123Method 2.
If the problem is to start the computer in a clean boot state and check if you are able to accomplish this task.
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
How can I keep my desktop icons in the same place that I left when I restart my computer?
Icon office locations
I have the Windows 7 operating system. How can I keep my desktop icons in the same place that I left when I restart my computer. Now the icons automatically all go to the left side of my desk when I restart.
Hello
References to Vista also apply to Windows 7.
Difficulty for the desktop icons set in not getting saved after restarting Windows
http://www.Winhelponline.com/blog/fix-desktop-icons-layout-not-saved-restart/-------
Save and restore the desktop icon layout in Windows NT/2000/XP/Vista (Win 7) - free
http://www.Winhelponline.com/blog/save-and-restore-desktop-icon-layout/Save and restore the desktop icon Layout in Windows Vista (Win 7) - free
http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/TIP : right click on desktop - DISPLAY - uncheck AutoArrange and snap to grid
When you want to restore the icons or the restore will not work. You can
Recheck those needed later and apply the attribute Align to grid before the
Auto arrange.-------------
Office catering - free
http://www.MIDIOX.com/Info
http://www.MIDIOX.com/HTML/desktop.htm------------
Lock the post Office icons and disable right click
http://www.techmynd.com/lock-desktop-icons-position-and-disable-right-click/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I accidentally uninstalled the trial version of photoshop cs6 on the same day, that I installed it. Adobe won't let me reinstall it? Help, please. I really want to try fully.
Fixed! I found the implementation of application in a folder called adobe cs6. I feel really stupid now because I forgot that you must run the application setup and so now I have the trial once again. Please help us well!
-
Recently, I switched from PC to Mac, and I transferred all my files photo. Now I am their integration in the Photos app in the dock (by dragging the file etc). But when I include photos from a folder in the Photos app in the dock, and then create an album for them, their order in the album change of what it is in the file. It is important for me to keep them in the same order that they were in the file. (In the file it is in numerical order). Any solution?
You can drag and drop to any order in your albums.
-
When I try my ipad FaceTime I get this massage iphone is not available your phone must be on the same WiFi that this ipad to make a call
In your FaceTime settings, what you defined as "Caller ID"? If you have set up the continuity (continuity use to connect your iPhone, iPod touch and Mac - Apple Support) and you have the iPad set to use your iPhone phone number to initiate calls, then you will need to have your iPhone and your iPad connected on the same wifi ntetwork.
If you set the iPad caller ID to call from, for example, your iCloud email address, then this message should disappear.
-
Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works
Hello
Also try a Ctrl + F5 refresh. This allows to bring the content of the page again.
-
Hi I have the same problem that many system disable code is 86331623 on a hp paviliondv6-6135dx
Hi I have the same problem that many system disable code is 86331623 on an hp pavilion dv6-6135dx
With this code it should automatically remove it.
REO
-
Apple TV 4 will not play my movies that I had in itunes. It says unplayable format, but it is the same format that I use always and a lot of movies? What could this be?
This new IOS is bug.
I had the same error message and tried to "create a different version" in Itunes.
The ITunes says "this video is already formatted correctly."
I tried to play again on the Apple TV and it worked then after a bit of buffering.
-
'System Exec' output in the same window that called
Hello
I have a complicated program, but let me break it down to what matters.
My labVIEW (exe) application is called by the command prompt. Does some calculations based on arguments that I passed to him.
The thing that I do not quite understand, is how to export the results in the same command line that called. (Not a new window) I'm hoping to run my program in the background, and if I'm hoping to avoid something fancy and you want just the results in the same window that called it.
Any help would be greatly appreciated.
Kind regards
Nyne
It is not really an easy way to do it. On Windows, you have several options:
- Try to use the Windows API commands to the Console (never really had much luck with these).
- Use the console .NET class (I doubt that it works).
- Use a trick I had suggested to copy text from the console just paste text directly into the console window. Joined a VI that does this. Note that it is 8.2 so I am unable to connect the cluster of error due to a bug in 8.2.
-
If a right click the office click on view, then uncheck show desktop icons and restart or turn off and turn on my computer can I repeat these steps, and then show the desktop icons check will be the same icons that I had before reappearing!
Yes. This control simply allows you to show or hide. It does not change the contents of the desktop (C:\Users\
\Desktop) user-defined folder. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org -
am I right to assume that the same reason, my windows 7 OS crashed & had to be re-installed seven times in nine months with the losse of precious files is the same reason that microsoft has been duffed the international space station?
Hello
If I understand correctly you install os 7 times, still problem happens, its just a bad sector in plateau, well shot cause want to check your hard drive a d, you need to change your hard drive to solve this problem, if it is in warranty log a ticket
-
Questions of OEM Windows 7 key
I have a question: if I use an OEM of Windows 7 key from a pc by the same company that makes mine (ASUS for example), it will be valid? Note that my PC doesn't have the mobo it is changed or upgraded. I ask because a friend gave me a key which it has been used on another computer (same System Builder) saying that it will improve the Windows 8 operating system, and it will no more need. I really don't want to have any nagging restriction because my copy has been hacked, upgrade in Greece, costs 100 euros.The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:
-OEM versions don't offer any free direct support from Microsoft technical support Microsoft
-OEM Licenses are tied to the computer first you install and activate it on
-OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard
-OEM versions does not move directly from an older Windows operating system
What is OEM software? :
http://support.Microsoft.com/GP/oemsupport_1/en-GBLicensing FAQ:
http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx -
I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?
I didn't know, I had to disable before turning back, but now I don't have this option. Is there a way to disable these two licenses and activate again the good?
Hi vasilisp36877173 ,
Please see these items:- Learn how to enable or disable Adobe applications
Solve the problems of activation and deactivation of Adobe and error messages
Let me know how it goes.
Kind regards
Christian
-
Are the AdobeID and inputs of password that I connect on your website are the same entries that I use to install Digital editions 4.5 on my computer?
Hi % 20% 20mark bark.
Yes, it would be the same. However, you need to make sure that it is exactly the same adobe id with which you made the purchase.
Let us know if this helps!
Maybe you are looking for
-
Re: Satellite L850 - mouse buttons are too hard
I just bought a laptop L850, but because I have little strength due to disability, it is difficult to click on the buttons of my mouse. Is there a way to relax (maybe even by opening the laptop and remove the spring)? Thank you.
-
How can I register for the apple care.
How can I register for the apple care.
-
How to turn on Satellite A100-847 Intel virtualization technology?
Is it possible to activate on A100-847 Intel virtualization technology?I try to run the VMWare Server to host the 64 bit OS, but it tells me that the VT CPU (T7200) capable but VT is not enabled.Is there a reason not to enable this feature of process
-
How can I detect if a step has been ignored?
In an application of C-Sharp, is there a way to detect if a step has been ignored once completed execution? ApplicationMgr.GetRunState () and ApplicationMgr.GetTerminationState () do not say if the execution was complete (Nothing ignored) or incomple
-
Help - I can't find the driver for the video controller (VGA compatible) for monitor E171FPb on the Dell web site.