Re: Satellite L850 - mouse buttons are too hard

Similar Questions

• Kensington Trackballworks sometimes has several icons in the tray system, exposed behavior, it is as if one or more mouse buttons are kept pressed when they are in fact not to be affected

  Original title: Kensington Trackballworks sometimes has several icons in the system tray

  Every so often from the start (no apparent reason) multiple Kensington TrackallWorks icons appear in the system tray and the unit behaves erratically until all but one of them are closed. Behavior exhibited, it is as if one or more mouse buttons are kept pressed when they are in fact not to be affected. I use a Kensington Expert Mouse and TrackballWorks 1.04 K64325 model number. Uninstall and reinstall the driver didn't help, or does uninstalling and reinstalling Windows.

  I checked with MSCONFIG, Autoruns and even when several copies work they show only one entry for the application. Any ideas /.

  Hello
   
  Since you've already tried to uninstall and reinstall the driver/windows, this could be a hardware problem. Please try to contact the manufacturer of the mouse for assistance on this issue.

  http://us.Kensington.com/HTML/1458.html (you can select the Technical Support of this link and then select Product Knowledge Base)
  http://us.Kensington.com/HTML/1445.html

• Satellite L850 - how to replace a HARD disk recovery partition?

  Hello.

  Toshiba laptop Satellite L850. PSKDGA-02Y012. The original HARD drive has failed in his colleagues even mobile, so we replaced the two HARD drive after you have created a recovery USB. When used to restore the operating system to original status of OOB.
  That has worked and portable runs much, but now I want to BACK the recovery partition (now only on the USB I think) for the new HARD drive.

  Simple to shrink the disk HARD C: (partition 2) on the HARD disk, but then how to transfer twhats on the USB (USB recovery stick) back on the HARD drive?

  Thanks for any help.

  Karim...

  Hello karim

  When you buy the notebook you will get it with preinstalled operating system (recovery image). Original recovery image is saved on the HARD disk on the recovery partition.
  Each owner of the laptop has option to make the backup recovery image and create recovery media. It could be the DVD or USB support. You can do this by using preinstalled Toshiba recovery media creator tool.
  This tool will create bootable recovery media that can be used for the installation of original image recovery if there is problem with the installation of image disk HARD recovery or when the drive is defective and must be replaced.

  Where the HARD drive is faulty and should be replaced or the owner of the laptop to upgrade HARD drive, you can install original image created using recovery recovery media (USB). After installing recovery image, you will have the same situation as for the first boot after the purchase of the laptop. With other words notebook will have factory settings again.

  In this case original recovery image is already copied onto the new HARD drive and you will also be able to start the installation of HARD drive recovery. There is therefore no reason to copy a recovery on HARD drive media.
  Please note: installation of HARD drive recovery works with the factory only settings.

  If you have any other questions do not hesitate to ask.

  Good luck.

• The mouse buttons are not switched

  Whenever I restart my computer I have to reset the default right back to my left hand favorite mouse buttons.  This has happened after that I upgraded my mouse driver.  Revert to a previous version did not remove the problem.

  Schoonerman salvation,

  · Who is the manufacturer of the mouse you are using?

  · Is there any type of installed software that came with the mouse?

  Sometimes software and windows will be conflict and this automatically resets the settings of Windows after restart.

  Do the steps below should allow you to keep all the settings in the SetPoint software at the same time to solve your problem.

  a. Click Start, type msconfig in the Run dialog box and press ENTER.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. in the System Configuration dialog box, click the Startup tab

  d. look for all named KHALMNPR entries or similar and uncheck the box next to them (there may only be a)

  e. click OK and restart your computer

  f. after the restart, change the speed of your mouse pointer and reboot

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• the user interface buttons are too small

  I got a new computer laptop sony vaio and all adobe products are unusable for me, because the user interface buttons are so small, that I am not able to read...

  We tried to change the settings of the monitor, but it does not work.

  Any ideas?

  Please excuse my bad English

  Hey, the guy in my computershop found the solution

  Here is Adobe App scaling on the displays high-resolution (FIX) | Dan Antonielli

  but should be integrated in every adobe product

  Thank you for helping...

  best wishes hopsenplops

• Satellite A215 - Fn button are no longer available after reinstalling Vista

  Hi all, not.

  I recently reinstalled Vista on my laptop and I noticed that the function key options are no longer available for brightness settings, lock computer and tastes. If anyone has a direct link to the drivers for that would be great, I thought that I had all of the visit by Toshiba but apparently not.

  In addition, scrolling does not work on my touchpad. I downloaded the latest synaptics drivers and installed and nothing helps... Any help on that would be appreciated also.

  I cehcked mouse options and those who appear to be good. There no options in the Panel "touchpad" however... maybe something there?

  Thanks in advance!

  RJ

  Hello

  The A215 is a laptop to US. I know that because of the 5 with the and of the model if you use the page of the Toshiba driver Vista us to get the right drivers.

  In any case the FN keys are controlled by Toshiba Flashcards Utility. This sis tool part of the Vista Toshiba value added package and I think that you need to reinstall this tool.
  I put t know why you touchpad scroll function does not work as it should perhaps settings are active or something like

  I have an A210. It s European model and equivalent to A215
  I can change the settings of the touchpad here:
  Control Panel-> mouse-> last tab (settings of the device?  :|)-> settings button

  Here he should open a new window and you can change the settings

  See you soon

• CPU in Satellite Pro U200 temperatures are too high

  Hello

  I'm a little confused / concerned about the temperature of my CPU (Intel T7200) in my Satellite Pro U200-199. The confusing thing is that the case temperature is generally higher than that of the junctions of the two nuclei, which is the opposite of how it should be.

  Everyone knows this?

  As well, the case temperature is higher at seems reasonable, even in basic use. Basic use of office applications takes the temperature to 49 c, and then everything above that (opening an application for example) increases the temperature has high degrees of the years 50 or 60. Under a larger load, temperature (T-box) goes up to 65 C.

  One of the consequences is that the fan is on most of the time.

  I would like to know if there is a problem with the measurement of the temperature T-box is measured correctly, or if the processor overheats. If the measure is a fault, then do nothing about this? Like changing the BIOS?

  I should mention that the computer is only a week and has a BIOS update.

  Any ideas or help greatly appreciated.

  David

  Hello

  The temperature of 50-60 degrees is not unusual. But I wonder how you measure this temperature or what tools or utilities did you use?

  Usually the CPU is not only responsible for the temperature inside the laptop.
  The graphics card and HARD drive also produce heat which increases the temperature of the laptop.

  Anyway, the computer supports protection against overheating. This protects the laptop and parts from overheating.
  If the temperature reaches a critical threshold the laptop would be automatically stops down
  but it seems that the laptop works properly so in my opinion that you should not be worried. ;)

• Satellite U500 - mouse button loose

  The left button of the mouse under the touchpad on my laptop has become loose.

  Is it possible to set / get a replacement?

  The warranty runs out in December.

  See you soon

  Of course. If the warranty is still valid contact the nearest Toshiba authorized service provider and ask for help.
  The warranty is valid until December, right?

  They will check this and if there is mechanical problem they will repair it for free.

• Satellite L850 - media buttons not working not properly

  Hello

  I have a laptop Toshiba L850, I had only a few months.
  yesterday when I came to play music on my laptop, the sound wudnt turn upwards or downwards when I pressed the volume buttons, they only work if I press FN.

  now when I got to the laptop I didn't press the FN key,
  I just pressed the keys f 8 and 9,

  can someone tell me please why as this changed
  Thank you

  Toshiba accessibility is the key!

  Start Toshiba Accessibility (accessibility type search)
  Check the box use the key sticking FN
  Put a checkmark next to the desired option
  Click OK

  Now you can use the features of FN buttons without pressing the FN key

• Satellite L850-1JH - dead, screen too dark

  Hi all.

  I had a problem with this laptop for the last four weeks.

  One day worked, it normally stops and the next day when I power the screen was dead.

  The fan stands up and lights, caps and numlock function, but not picture.

  There are also 3 days ago, I noticed that if the screen is tilted I can actually see the Toshiba logo at boot and then a few icons on windows 8.

  For what I found online that this laptop doesn't have a UPS because she is LED which requires current DC which is quite a new thing on laptops, I think.

  One thing which I use to to check if there was any kind of output image has been to connect the laptop to the tv, but for some reason, that no picture is via vga or hdmi port.

  That being said I'm reluctant about the fault being the monitor. One thing I'm positive, I can certainly see very dark and with the monitor image tilted slightly.

  Someone had a same or similar problem?

  See you soon.

  Albert

  I ve never been faced with this problem on my Toshi and cannot say for sure what the problem is here, but my opinion is that you should contact the nearest Toshiba service provider and ask for help.
  I assume that the warranty is still valid for repair, if necessary, will be free of charge.

  Check it please http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
  There you can find ASP addresses and phone numbers in your country.

• buttons are too large on a model!

  Hey everybody. One more problem.

  I'm messing around with one of the free reactive model when you create a new site in British Colombia. everything works great except for this thing and I just can't understand it.

  

  Note that the clear cart button is the right size. I paid by css and everything that I know everything, but he couldn't understand.

  If anyone knows how to solve this problem and get the 'Check Out' button to regular size I'll be your friend forever.

  Thanks in advance. See you soon!

  Hello

  I see that you have already addressed the issue, let us know if you have new questions.

  Kind regards

  Alex

• most needed the mouse buttons in labview

  When you use the "Aquire Input Data" Vi in labview. Only 4 mouse buttons are able to be read. I have a mouse with more than 4 buttons. Anyone have any ideas on how to address the issue. I watched do visa driver but then he removes the windows driver and I stopped there. Do not know why they were limited to 4. VI "Queries input devices" shows that the mouse has eight buttons. A game joystick allways type displays all buttons. I bought the mouse specially for the application, but did not check the vi that I usually use a multibouton joystick. Any help is appreciated.

  
  

• Cannot change left/right mouse buttons.

  There is no tab in the properties of the mouse buttons. Some time in all of the recent "improvements" that gave me a center mouse & keyboard, the button tab disappeared from the properties of the mouse. I have reviewed each tab, and there is no option to switch left/right button. I click the mouse & keyboard Centre, but it's just a center of the keyboard. No the mouse settings. I tried to change the registry option in the parameters of keyboard keys mouse left/right switch (from 0 to 1), but it has not changed anything and switched back to 0 when I restarted the computer. The tabs in the properties of the mouse cpl are Options of the pointer, wheel, material, activities, Touchpad, mouse & keyboard Centre of Dell and pointers. No tab buttons, zero, not zero.

  Fixed a problem. The registry key seems to have finally saved after the last charge, and now the mouse buttons are gone.  I put the following registry key from 0 to 1.

  Computer\HKEY_CURRENT_USER\ControlPanel\Mouse\SwapMouseButtons

  Is no longer, I worry that there is just no tab buttons mouse corporal my work me has with a Logitech mouse that the manufacturer doesn't ' t even appear to support with the drivers, so I ordered a new mouse for a future use of the store business. Thank you.

• mouse buttons act as touch pad

  Pavilion DM1 - 3245CA Windows7 64 bit.

  Right out of the box, I found the touchpad to be extremely frustrating that the delimited areas as 'right' and 'left' mouse click the points are just as sensitive to the touch as the touchpad itself.  The area of the mouse button can be used as the Tablet!  Therefore, when you touch the area to the right or left click on the mouse often jumps to a new location, which sometimes causes other "destination".

  When I followed the instructions on the web site to modify the sensitivity of the touchpad or mouse button areas, the screens I see are different to those indicated for this machine and driver downloads for the touch pad indicates that I have the drivers.

  From my point of view, it is a flaw that makes it almost impossible using this computer without using a USB mouse.

  Boring, so you know what.

  Figured it out on my dm1z

  Go to mouse properties in Control Panel and then device settings tab, and then click settings

  Under scrolling of the matches of the Palm check...

  Drag on the gear icon and click on it, it should open a configuration window

  I put the activation time filter 0

  then I check the two boxes of restriction

  then I move the mouse over the black central square at the bottom of the starting area, and then drag upward a bit take outside the touchpad buttons. Press close and OK endangered.

  crazyiest touchpad I've ever seen, I still have problems moving the slider even with this setting.

  Let me know if find you the best settings

  .

  .

  

• I have to press my left touchpad mouse button too hard to make it work

  Hello.  A technician has worked on my touchpad mouse and now I have to press on / click with the left mouse button too hard for her to work/register I am clicking on it.  I don't know what the mouse setting to change to fix.  I'm afraid that if I go to by clicking on it too hard I will break.  Can someone please tell me how/where to adjust the setting.  Please be precise because there are several settings, it may be.  I tried to adjust the click fast/slow, but that's not all.

  Thank you!

  He didn't touch anything in terms of reassembling any what, everything he did was in terms of changing the settings - I was there