Is the iPad limit data usage via personal hotspot from my iPhone?

Similar Questions

• where can I get advice on how to set up the iPad for a partially sighted person

  Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?

  Paul,

  Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.

  

• Why the Personal Hotspot from my mobile phone appears in my list of list wifi networks if it is disabled on my phone?

  Why the Personal Hotspot from my mobile phone appears in my list of list wifi networks if it is disabled on my phone?

  On my iMac, there is an icon for a list of available to join Wifi networks.

  One of these Wifi networks is my iPhone Personal Hotspot.

  However when I look at my setup on my iPhone Personal Hotspot is off.

  I tried to join the Hotspot to my iMac and put.

  This is part of a feature called Hotspot instantly. It allows you to connect to your personal hotspot without your password or activate the hotspot on your phone. Don't worry, this does not allow other people to access your hotspot, only devices using the same identifier Apple will see your hotspot. This feature is not using any extra battery life when you're not connected to it. You can learn more about instant Hotspot here: OS X Yosemite: connect to the Internet using instant Hotspot

• How can I do to keep my photos in the icloud, when I delete all my photos from my iphone?

  How can I do to keep my photos in the icloud, when I delete all my photos from my iphone?

  If you have iCloud enabled library, all the photos that you delete from your phone will be deleted to iCloud and other devices connected to this library to iCloud. The more you can do to reduce storage required on the phone is to activate settings > iCloud > Photos > optimize iPhone storage.

  Apple is currently not all parameters of cloud storage only. You can suggest that more options are available through http://www.apple.com/feedback/icloud.html

  There are 3rd party cloud services that only have a cloud options.

• I can't find the button 'action' to have my photos deleted from my iphone after import is complete.

  I can't find the button 'action' to have my photos deleted from my iphone after import is complete.

  When you import the and with what application?

  If you use the new pictures check box in the import window, as shown in this screenshot:

  

  If you're still using iPhoto then is that you say not to remove from the iPhone until you start the import process.  This window will open so you can choose whether or not to remove it from the iPhone:

  

  Finally, if you use Capture picture to import your photos the box will be in the lower left corner of the window:

  

  

• The reading of data acquisition via tcp

  Hello

  I am building an application that controls an acquisition of data via tcp.

  I have a JAVA program that communicate with labview, give a command and data acquisition starts. (So, I read the correct Java data at Labview)

  My problem is if I try to read data acquired by data acquisition (continuous sample 1 k samples), I've read strange values.

  I transform of double values in the string and send it via tcp.

  How can I read it in Java? What type of socket should I use? What is a rate problem?
  I also tried to transform small/big-endian byte order, but it does not work.

  I enclose a sketch of this part of the application.

  Please help me, I try for 2 weeks!
  Thank you all...

  I find the solution in the lavag forum.
  I post here, if it can help someone.

  http://lavag.org/topic/16359-sending-LabVIEW-data-via-TCP/page__pid__99983#entry99983

• Return to a specific page after the call to a procedure via a hotspot link

  Greetings,
  
  With the help of > > Application Express 4.0.2.00.07
  
  I have an APEX image map request. I have the hotspot in the image maps links go to a new page in the application and pass a set of Parameters. This part works fine.
  
  I now have the need to call a procedure from some hotspot links. The procedure call works fine, with one question. When executed, it opens a page of empty with 'Complete' browser at the bottom of the page. Now, I'm stumped. Is there a way I can keep it to open another page? Is there a way I can direct to open a specific page? I have to go about this in a completely different way?
  
  I hope that there is a code htp that I can add to the procedure to keep it on the current page. Unfortunately, this isn't my strong point. Even some htp code that displays a message and ask the user to click on back or a message that contains a URL that would come back to the page would be great.
  
  Any suggestions are appreciated.
  
  This is the code in the image map hotspot...
  < area shape = "rect" coords = "661,240,691,270" href = bg_qcis.create_defect? p_cell = 23-9 > < / a >
  
  Thank you, Tony
  
  Published by: hidden on 26 April 2012 15:20

  A call to a URL and includes a URL call to a procedure, redirects to this page. Specs is HTML and browser. As the proc does not refer to something that can make the browser, you see the blank page. "Done" means that the process stops not at an HTTP Error 403, 500, etc.

  Rather than try to navigate to the calling Page using history.back() () or trying to open the URL in a separate window by adding target = "_blank" in the anchor tag of the link on the calling page, it will be much cleaner / more neat if you use on of the UTL_HTTP. Functions of APPLICATION (a 2 signatures) in a process of Page or the application process.

  If you want to avoid a page submit so write an AJAX call to call for an implementation process that calls the Proc URL using UTL_HTTP. REQUEST; and then htp.p the result in the Page like any other AJAX response.

  Kind regards

• Can I connect to the WiFi of someone else to print wireless from my iPhone?

  I have a printer HP Photosmart 5525

  As long as you have their permission and the password, Yes.

• Homekit with the iPad as hub problem

  Hello

  I just installed iOS 10 on my iPhone 6 and iPad 2 Air and try to play with HomeKit to remotely control lights of the hue.

  I can control accessories from my iPhone and my iPad, when both are connected to my Wifi network.

  I install my iPad as a Hub HomeKit via settings/Home.

  My iPad is well detected as HomeKit hub on my iPhone by the host application.

  The problem is when I switch off my iPhone from my Wifi network and connect through 4 G: I can no longer control accessories: my iPad is still considered homeKit Hub from my iPhone, but I get failures when trying to turn on the lights/out.

  I disconnected my iPad iCloud account and reconnected (same account iCloud on my iPhone).

  I've disabled iCloud/HomeKit and reactivated it on my iPad.

  I've disabled host/Hub and reactivated it on my iPad.

  I restarted my iPhone and my iPad.

  Checking with 2 factors is enabled on my account.

  I deactivated and reactivated the iCloud keychain.

  I plugged my iPad to a charger.

  Without success, any idea?

  Could it be associated with my case ADSL settings (UPnP is enabled)?

  Thank you.

  Good news: I removed my house in Homekit and created a new one from scratch: it works fine now.

  Thank you.

• Can a crook hack an iPad with just the iPad serial number

  AN alert came on my iPad while I was with safari and he said I had a virus and I had to call a specific number to solve the problem. I called and hey asked me the serial number of the iPad, and I gave that person and after that he seemed suspicious, so I hung up. They always have my serial number, so I was wondering if they can hack the iPad with just the serial number?

  This serial number is linked to your iPad. The call is a scam!

  If you have configured authentication code your on your iPad, even if they have the serial number it should not make a difference.

  If you have not set one, do it immediately > use a password with your iPad, iPhone or iPod touch

• How to display images of a DSLR on the iPad without their import?

  Hello

  I had a mini iPad and I want to use to view images taken with a digital SLR. I have a Flash to the USB adapter and a Flash of camera SD card reader. I have tried both to display the images, but I can use them only to import images with the photos app. The problem now is that the memory of the iPad is too small, so that I can import only a fraction of the images stored on the SD card of the DSLR. It is very annoying to wait for the creation of thumbnails of images about 500 in order to import only 50 of them, the visualization of this subset, and then throw away them so that the next 50 images can be imported. With a laptop computer or even an Android tablet I can do that in a few seconds, but with an IOS based device it takes forever to just see the images.

  I could not find any application that is capable of providing a simple workflow for preview images. There are some applications of cloud based for this purpose, but they are completely useless if you are on a vacation without any internet access trip.

  I read that older versions of IOS has provided an API to access images on a USB memory and there were about 150 apps using this API. But for some reason any (business?) Apple dropped of this API and launched all of these apps useful the App Store. Is there any other app available for the iPad or Android tablet is better suited for my desired use case?

  Thank you.

  Is there any other app available for the iPad

  
  

  I have collected this information from my readings of these discussions and read the web site of the manufacture. You will need to evaluate these comments to your situation.  I'm only sure any point 2 work with a camera.
  

  
  

  Yes. Airtash allows you to look at the data with a web browser.  Maybe it will show you the images too.
  

  
  

  - 1 - App Photofast is still in the app store.
  

  
  

  PhotoFast Drive IFlash
  This is a beautiful map.  You can move data back and forth!  Be sure to get the real thing.
  http://www.PhotoFast.com

  Review:
  http://www.Macworld.com/article/2036911/review-i-FlashDrive-HD-a-flash-drive-for - iPad-iPhone-and - laptops.html

  Here is the ios app:
  https://iTunes.Apple.com/us/app/i-FlashDrive-HD/id525386291?Mt=8

  Finally, there is a cheap imitation product that does not develop their own software and the software of PhotoFast pests.  Maybe people in using the imitation product are complaining.

  -2-hourly there are maps Wifi camera.

  Series FlashAir™ II Wireless SD Card

  -Sharing of photos and videos wireless

  -Capacity 16 GB

  -Takes to support simultaneous access of up to 7 devices.

  -3-hourly Airstash

  "Easily access, transfer and disseminate your AirStash® files - flash drive wireless pocket for iPad, iPhone and iPod touch! This application requires a device AirStash in order to work.  View, import & export photos, wireless, videos, music, and podcasts and view documents stored on your AirStash. AirStash + is the best alternative to the built-in web interface, adding features only available with a native application. »

  http://www.airstash.com/

• Print from ipad to printer usb via a wireless router

  Is it possible to print from the ipad to DeskJet 882c via a wireless router that supports usb (like Linksys EA3500) print?

  Thank you

  Hi Ralph51,

  Welcome to the Forums of HP's Support. I understand that you would like to know if you can print from your iPad to your printer Deskjet 882c.

  I've included the document on the Part of your printer on a network with Apple AirPort . It would be the only option available to print from your iPad.

• Can the iPad reset my new email password from outside the material?

  I used my mini iPad more than 2 years. A day ago I had to change my password main e-mail through my office due to some strange events in my account. My Android phone has stopped receiving emails after that; I have to reset the password in it. I thought I have to reset my iPad, too, but it seems that the emails always get through, as if nothing had happened. Is this normal? How could the iPad reset my password by email directly from the e-mail box, to outside the material? Is it considered normal?

  I've never been through this. To change the email password, you will need to go into settings, messages, contacts and calendars and manually change them

• Error 91 - try to use the variant of the function of data

  I'm running a problem when you try to use variations in my application. I have a setup of State machine that a State creates a list of tasks (cluster of tables), and then converts it to the Variant. The variant is fed into a shift register that allows me to access the list of tasks of a different State.

  The problem comes when I try to use the variant of the function Data. I right click on the task cluster to create a constant and then wire to the TYPE of the variant of the function Data. I wire the variant of cluster of task to the terminal of the VARIANT. When I run the VI, I get error 91: or the possible reasons: LabVIEW: the variant data type is not compatible with the data type of wired for the input type. ».

  How can I get this error if the type that I have connected to a Terminal TYPE of the Variant Data terminal is a constant created from the exact type created a variant of?

  Section of the machine of the State where I wire the cluster variant:

  

  Section of the machine of the State where I use the data out of the cluster variant:

  

  The constant wire to the terminal of data TYPE variant was created from the cluster that is connected to the Variant type data. I don't understand how there is a type mismatch?

  Is there another State between these two?  I notice you have some tunnels 'Use default if unwired' coming out of the structure of your business.  First of all, clear on the tunnels.  Second, in cases where you do not only affect the data, the data directly from the tunnel entrance in the tunnel exit of the wire.  I recommend using the tunnels linked to make it even easier on yourself.

  With the default tunnels being output, your variant coming could really be empty, so the conversion fails.

• airprinting to a printer h470wbt using a personal hotspot on iphone

  I have a laptop that works with Windows 7 and has a WiFi connectivity through a Personal Hotspot with my iPhone 5 (IOS 7).  My printer is a H470wbt and it is configured to print with my laptop.  Works very well.  I now want to do is to "airprint" of the iPhone or iPad Mini.  I installed the HP app called 'ePrint '.

  Problem: ePrint tells me "no printer found.

  Could use a little help on this (after many hours trying to figure it out myself).

  P.S. The H470wbt is about 4 years old.

  Ralph

  Hi Ralph, AirPrint is a feature that is native to the Apple iOS on your iPad, however in order to use it you need an AirPrint compatible printer that your model is unfortunately not. The H470wbt supports to print via the print application mobile ePrint, but to do this the printer and the appliance on which is installed the app must be on the same local WiFi network, i.e. a local LAN that uses a router as a wireless access point. So here's a support document which guides you through setting up the printer and install the software for a wireless network using an access point if you choose to do in the future

  http://support.HP.com/us-en/document/c01830670

  Hope this information helps.

  Best