Print from ipad to printer usb via a wireless router

Similar Questions

• I have a laptop Windows XP and win7, connected via a wireless router.

  I have a portable desktop and win7 winXP connected via a wireless router.  Can see the XP machine with the file full access Win 7 but not vice versa.  On XP, clicking on C: of the laptop gives error "C: is not accessible. You have no permissions... "How can I fix it?  As far as I can tell all together relevant upward is correct on Win7.  No password have been set.

  Hello

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• DSL via a wireless router: slow XP, fast on Vista

  DSL via a wireless router: slow XP, fast on Vista

  Hello, I just moved into a new House that has DSL service. My Vista laptop connects seamlessly to the network, but my XP machine trickles in at 50-150 Kbps and is flaky. I rebooted everything, power all pedaled, verified and updated the drivers. (Maybe I missed something?)  The specs are all lower. Any thoughts on what is happening?

  Thank you!
  Brian

  EarthLink DSL
  VisionNet Modem
  Linksys wireless router (router broadband wireless - b)
  -BEFW11S4

  2 wireless laptops

  Get about 1 Mbps on a Vista Machine (which I believe is the expected rate).
  (Dell XPS M1210)
  Works with either ethernet or wireless connection to router

  Get about 50 Kbps on the XP Machine
  (Dell Latitude D830)
  Works with no wireless or ethernet connection to the router
  Intel Wireless Wifi Link 4965AGN,
  Driver: 12.4.3.9, Date: 28/05/2009

  Two laptop computers were working well 4 days ago in my previous House, sharing a connection to broadband Charter via a linksys wireless router.  The works of XP machine still work well pick up public Wi - Fi in coffee shops, etc.

  Under the name Vista computer works fine... I suggest to check again the Xp computer and disable the firewall and antivirus on the computer and try... You can try changing the wireless channel on the router... Also keep the mixed mode network mode.

• HP6110 printer connection to the wireless router, USB port

  I have a HP Officejet 6110 all-in-one printer, a Toshiba laptop running Windows 7 and a CGN3ROG Hitron of wireless router.

  I try to get the printer on my home network by plugging it into the USB port on the router. I can't make it work. Has anyone managed to do this?

  Derek

  Hello Cheetah12,

  Thank you for your response. Yes, my printer - HP6110. I have read the manual you sent me and understand that I can not connect directly to the router with print server - print server HP JetDirect 175 x Rogers, tells me that the router is turned on print server. I'll have to break down and buy a wireless printer. The networks of the great printer if I connected to a computer.

• Can't print after installing new wireless router

  Replaced the wireless dsl router and 8600 OJ Pro printer no longer works.  Tried to find a way to add password/key router for printer and nothing does.  Any suggestions will be greatly appreciated.

  Hi bjzatx,

  Follow the steps below.

  1. press on the icon on the Control Panel printer wireless

  2. press the settings button

  3. scroll down and press the default network

  4. http://support.hp.com/us-en/document/c02886889 

  5. Once you have the printer connected to the new router, you will need to go program - HP - IP address files update and then enter the new IP address of the printer until the software see the printer.

• Re-setup of printer after new installed wireless router.

  Having recently installed a new wireless router, that I had to reinstall my Photosmart B110a as I did not see the printer on Apple devices using the router.

  There are 2 Intel MacBooks, 1 iBook G4 and a PowerBook G4 all work OSX 10.5.8 plus an office of G5 running 10.4.11 on this router.

  I installed the driver but when I try to add the printer I get a dialog box requesting the "Ipadmin" username and password.

  I don't, as I remember, put in place a group skinning Ipadmin and I was wondering if anyone else had come acrosds such a request?

  Is this useful? : http://support.apple.com/kb/TS2754?viewlocale=en_US&locale=en_US

• printing with the new wireless router

  I have a HP 8600 printer. How can I change the printer to recognize a new router. I printed the configuration page and the new router is on the list but I can't find where to change the printer so it will use the new router

  Hi @riverfront36

  I can help you set up your 8600 with your new network. Please use the following document to solve the problem and I would like to know the results of your efforts; Connection of the printer after you have changed your wireless network.

  I hope this helps.

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• 3630 air print: 3630 to new wireless router connection

  Hi, I changed my router, and cannot get my print printer 3630 look to connect with my I pad any help appreciated

  Thanks for the reply, however the solution after a lot of research, is press the wifi button and cancel on the printer for three seconds to set the printer mode, go to the wifi settings on iPad select printer say's in the fashion game, return to AOI app and follow the instructions, insert the new password to router and printer will recognize network.

• V40 HP on office xp and is shared via the wireless network. laptop with windows 7 will not be printed on v40.

  Cannot print from laptop (windows 7) via the wireless router desktop (windows xp) with attached usb HP v40 .for all-in-one.

  (7) - wireless laptop router - desktop (xp) - usb - HPv40

  Has worked for laptop is running xp.

  Laptop of the coils of print job at the office and apparently complete, but the bureau simply ignores the print job.

  No error message.

  printing from office very well.

  I reported this as resolved. I submitted this problem. The problem started when the update of my laptop computer from Windows XP to Windows 7. When I did, the Lexmark printer to my desktop worked find with the new system of the laptop. The HP V40 has failed. The Office has just received each print job submitted from the laptop (via a local wireless network) and scrapped it. I could see the print job come in the V40 print queue and could disappear.

  Here's what I did to solve the problem:

  I tried a dozen or so combinations of withdrawal and installing the printer on my Windows 7 laptop and my Office Windowx XP (with the V40 attached via USB) and manually removing and installation of printer drivers on my desktop PC, it works finally. What have I done? I have no idea, but I think that deleting manually pilots v40 on the office was part of the solution. While view printers available on my XP desktop computer, I clicked on file and one of the tabs has led me to a place where I could remove the drivers for each printer (I just removed them for the V40).

  Here's what I DIDN'T DO:

  I'm not following the advice of the HP support person I contacted by phone. This Board had to reinstall Windows XP on my desktop. That clearly was not the problem when I talked to him. But he would NOT listen to reason. Luckily I have enough knowledge to know PC than its low of false tips

  I am pleased with the resultant availability of the V40 again.

  I have no idea how to officially close this problem.

  I would be happy to discuss with someone else who has a similar problem, but when I submitted this problem with my name and email address, the moderator has deleted my presentation of the problem. Therefore, I think that all those who want to know more is out of luck.

• Cannot print the Vista Home Premium laptop on printer Epson Workforce 610 wireless

  Tried to implement printing wireless since our Toshiba laptop under Vista Home Premium to an Epson Workforce 610 printer.

  I have already implemented printing wireless this printer to my desktop under XP Home SP3 without problem and continue to be able to print from there.

  I went round and round with Epson.  They helped me get the printer configured on the laptop, but because the printer is working from the office, they say that it is no longer their problem.

  Here's what I know:
  -Wireless running on a Belkin Wireless G router, model #F5D7230-4, v.6xxx, with the firmware update.
  -L' laptop and printer are both connected to the same secure wireless network.  IP addresses all look OK, and I can see all devices when I look at the settings of the router.
  -I am running Trend Micro Internet Security 2009, but I turned it off.
  -Windows Firewall is also disabled.
  -I can print via the wireless router if the laptop is connected directly to the router.
  -No, I can't print from the laptop to the printer if the laptop is connected to the wireless network.

  I think there are some settings or configuration of Vista which is at the origin of the problem.  I looked the likely candidates in the properties of the printer and in the center of network & share, but I don't know enough about Windows or Vista to really know what to do.  Anyone has any ideas on this?

  Hello

  My suggestion would be to update the firmware on the router and wireless adapter first.

  Go through the following article. It can help you
  http://support.Microsoft.com/kb/314073

• Desktop PC cannot connect while laptops successfully connect via a wireless connection on the same home network.

  I have a Windows XP desktop PC.  I also have two laptops.  I can connect to the internet via laptops via my wireless router, but I can't connect to internet via desktop even when it is plugged directly into my DSL modem.  I replaced the Ethernet cable, nothing helps.  My status of connection to the Local network on the desktop shows little or no connectivity, but I've done all the troubleshooting procedures, (including / Release ipcong & ipconfig / renew) cause a message saying: unable to contact your DHCP server.  Any thoughts on how to solve this problem?

  What's your DHCP enabled router wireless

  If yes then brand IP automatically defined in properties Office lan yor

  or try set ip next ip address manually your portable computer ip address serial with the same mask of the subnet and the gateway address.

  It can happen when dsektop cannot find the DHCP server

  Concerning

  Hope this will do the needfull

• Connect the new iPad Pro for USB printer

  Do I need a special cable or a Hub to connect these 2 elements.

  You cannot connect via USB to your iPad, it will not be recognized. Is the printer compatible wifi?

  If the printer supports AirPrint, you can use your wifi network to print on it: on AirPrint - Apple Support

  If it isn't, some printer manufacturers have their own applications in the App Store to print their via wifi, or there are third party printer applications in the App Store that could work with him.

  If the printer is not compatible wifi, you could (I have not tried) able to connect it to a computer and print to it via who (for example print via an app on the iPad that sends the print job to/through the computer)

• Photosmart 7520 cannot print from Ipad or iphone

  When I try to print from ipad or iphone error message "no printer found airprint.

  Have tdiagnostics helpried online all the solutions proposed by the Apple care and diagnosis HP online help.

  I tried all the solutions proposed without success. Resorted to the hpeprint app download. Is not ideal, but at least now I can print from my iPad. Thanks for your help.

• Trying to airprint from iPad 2 with a new 6510. message of frequently without air printer found help

  HP 6510; error-1 message; About 10% of the time printing works of the 1st try. More frequently, it is a painful process. Have an ATT & T wireless connection that appears strong. At least 3bar and shells, but the error message is that no printer no air is. I am a novice and don't know what to try. I had hands on ethnically support guru of Apple and can't find any problems.

  Hey there. AirPrint works in Wifi and not by a cellular network. Make sure that your printer and iPad are both connected to the same wireless network.

  Check out this link: printing from an iPad that will give you training on the different applications available to print from your iPad and how they work.

  See also: "the printer is not found", "no printer not Found" or "printer offline" Message appears on the iPad, iPhone or iPod Touch this will help you to solve the problem more in depth. Just make sure that you two devices (printer and iPad) are connected on the same wireless network. Also, make sure that Bluetooth is disabled when you try to AirPrint. Bluetooth has a tendency to interfere.

  Hope this helps and post back if you have problems to make it work.

  -Sean