Is there a pre-emption LW AP function?

Similar Questions

• Is there a way to disable the function where firefox opens a new tab when you scroll a click in the header bar?

  Is there a way to disable the function where firefox opens a new tab when you scroll a click in the header bar? This feature in conflict with my program of multiple monitors (display fusion) since this program allows you to change your current active window the monitor 1 monitor 2 and vice versa BY clicking the header of BAR SCROLLING (or whatever you call the highest part of your window). With firefox, I can't easily change my active window between monitors because instead, it opens a new tab.

  If the window is maximized, you can then switch this pref to disable the display of the tabs in the title bar:

  • browser.tabs.drawInTitlebar = false

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Kalonline-works until I get the anti-piracy icon so stop saying: there is a problem with the function of anti-hacking

  I play kalonline (RPG game), when to start the game it works up until I get the anti-piracy icon so stop saying: there is a problem with the function of anti-hacking. the program stops. I am the admin of it say kal computer run it in administrator mode and I did and I delete and reinstall the game. Solve the problem in win 7 by a right click and run as administrator, they wanted to work in win xp it all fits on how to solve this problem. These are the things, I was told to do to fix it.
  Hello

  It comes to KalOnline.

  Your error message can be corrected by following these steps:

  1. run KalOnline in Administrator Mode.

  2 uninstall KalOnline d_lete the entire Inixsoft folder, then reinstall the game.
  I did it and and it has not worked. then I was told that this was causing the problem

  Please check your computer system.

  This problem has occurred by a kind of problem of piracy.

  And if you have used a kind of memory-editing program, it could be happen too.

  So if your receipt similar to, then please remove it.
  I have none of these things on my computer. All I know is that people who have not updated windows xp can play the game and people who win 7 can play the game if they right click icon and run as administrator, that I still say side here but no way to prove it.

  Hello

  I suggest you to get in touch with the manufacturer of games and see if there are any other fix for this problem.

• Whenever I get up for a minute, my computer turns off is there a way to disable the functions "sleep" and "hibernate"?

  My computer used to stay... since I work with clients, my computer work is often interrupted. He is turns off if I stop for a moment and it's annoying to keep back on each time. The function 'Start'-j' looked where you shut down your computer and noticed "Sleep" - who says turn to turn off and saves the info... and "Hibernate" - which goes out and saves the info... but I don't remember always those who are there. Is there a way to disable this option, so my computer stays on?

  It is not related to firefox, but I think I can help you:

  1. Click on the stack (if you are connected, there a picture of a plug) in your taskbar (near the clock) windows
  2. Click more power Options
  3. Otherwise, go to control panel-> power options
  4. Click change when the computer sleeps
  5. Adjust the settings so that your computer does not sleep for a long period of time.

  See also: http://www.howtogeek.com/howto/windows-vista/disable-power-management-on-windows-vista/

• Is there a fix to register Norton functional Identity under Firefox 10.0.2?

  Norton Toolbar (NIS 19.5.0.145) appears on my FF 10.0.2 and I open it identity register to edit my maps and connections, but I can't call my identity cards save to AutoFill name/address forms and forms of credit card. The option to use a card does not appear on the drop-down list in the Save identity. Identity of save is fully functional for the same web sites using IE 9, so the problem does not seem to be the web site itself or the NIS settings. I ran multiple updates of NIS/reboots and reinstalled FF 10 when I upgraded to FF 10.0. Any other suggestions?

  This staring at me! Disabled Norton Toolbar, restarted FF, reactivated NTB, restarted FF and Identity Safe now recognizes the appropriate forms.

• I think that there is a bug in the function RT Set CPU pool assignments (SMP)

  I'm trying to configure Symmetric multi Processing on a PXI controller which has 2 CPUs.  I check the number of processors using RT get number of processors (it gives me 2).  I have a constant matrix of wire to the RT Set CPU pool allocations function and create an array of 2 elements with system and reserved as the two values (to assign a single processor for my timed loop and the other for "everything else").

  It works, which means it seems to do the assignment.  But if I look at the assignments of Pool Set CPU error line, it returns-2231, "invalid CPU pool settings. Each pool must contain at least 1 CPU. »

  I do not know what that means, or why I am getting the error (I might just "ignore it", but if the error is 'real', which is not supposed to do).  The entrance to the Pool Set CPU assignment is described in the documentation as "an array of enumerations, with an entry for each CPU.  For me, this means 2 entries, which is what I have.

  Does anyone have a rational explanation of what's going on?  Is this a bug?  The documentation is the problem?  I have attached the front (showing the number of processors and the error output) and the (very simple) block diagram.

  Bob Schor

  

  Thank you, Bobby.

  I reread carefully the Note help "Specifies the Set of processors available for automatic load balancing".  Now that I know the 'right answer', I can interpret what is written as planned, but it's not easy!

  It is also curious that, although the previous example has generated error-2231, if we deleted the error (or wired never error line), function has, in fact, affect the system and Timed Structures pool to CPU0 (I have a few 'real' testing code that shows CPU0 with Structures Timed cycles).  Given that the function "does the right thing" even if you specify parameters of 'bad', perhaps it should be treated as a warning, not an error (or otherwise make a mistake of 'real' not assigned to a pool - it also wouldn't hurt to have a less obscure the Error Message, or more explicit "be sure to have at least a CPU explicitly assigned to each system and Timed Structures pools") , maybe in "BOLD".

  This code has no error:

  

  Hereby I give you credit for the 'Solution', but I'll mark my answer as the Solution because it has a photo to help readers who are intrigued by the question and our responses.

• After cropping the photo, is there a way to prevent the function from the previous version?

  After cropping a photo, I don't want that it is original to never be recoverable. Is there a way to do this? I just discovered the tool of the previous version. Can it be disabled or the photo "permatized" sort?

  Thank you

  After cropping a photo, I don't want that it is original to never be recoverable. Is there a way to do this? I just discovered the tool of the previous version. Can it be disabled or the photo "permatized" sort?

  Thank you

  ====================================
  Library archives new copies of edition
  photos in a hidden just to file
  Revenant.

  If you deleted the originals of copies... back
  is not possible.

  Is the path to the folder on Vista systems:

  C:\Users\\Appdata\Local\Microsoft\
  Windows Gallery\Original photos

  It would be a hidden file, you may need to
  Change the following setting:

  Reach... Control Panel / folder Options / View tab.
  ... To check "Show the hidden files and folders" / apply / OK.

• Is there in front of the SUM function?

  Hi all

  I'm trying to subtract to the current line and 1 previous row, what analytical function should I choose? (In front of the sum)

  Select a.*, SUBTRACT(endpoint_number) (endpoint_number order lines between 1 and previous current line)

  from user_histograms where table_name = 't' and column_name = 'YENI ";

  Concerning

  Charlie

  Subtract from what? Prior to the current rank? If so:

  Select a.*, endpoint_number - lag (endpoint_number, 1, 0) (endpoint_number order)

  from user_histograms where table_name = 't' and column_name = 'YENI ";

  SY.

• Is there a way to discover the function calling ESTK?

  Dear forum,

  How do you find the calling feature?

  I remember this issue has been asked on the forum before and, if my memory is good, it's Peter Kahrel who did it. Anyway, it was a long time ago and I can't find the post.

  main();
  function main() {
      hello();
  }
  function hello() {
      // Is it possible to find out that the caller function is 'main'?
  }
  
  

  Before taking the post, I googled for it and find many suggestions, for example:

  alert("caller is " + arguments.callee.caller.toString());
  
  

  But nothing works for me.

  Kind regards
  Kasyan

  Here is a new version of the function:

  function callerName() {
      var arr = $.stack.split(/[\n]/),
      callerName = arr[arr.length - 3].replace(/\(.*\)/, "")
      return callerName;
  }
  

  I fixed the regular expression to remove the brackets and everything.

  The previous version returns the name of the function with arguments, as follows:

  Result: ProcessTables ([paragraph: [object paragraph]])

• Flash game - is there a way to make the function of stage names?

  I have a game where you are conditioned to the task to collect various objects on the screen. I did level 1 and everything worked fine. Then, I decided to level 2 in a new file. I completed level 2, and deliver level 2 in the main file, however I had used the same lvel object names 1 and level 2. This has resulted in close to 100 errors due to the high amount of bodies and the functions of the same name. I want to know is that you can use code in the action script to ensure that functions and instances are specific locations. For example, to make sure I can use the function 'checkCollision' in the stage 1 and stage 2. Thanks for your time.

  lol you can use the duplicate on the same timeline function names.

  If the functions with the same names are the same, you can simply remove these functions from your 2nd stage.

  or, you can rename these functions.  This can be done using stage names to concatenate with another string and can be automated with jsfl.

• FDM - There is no error message [UpCheck Function]

  E.M.P. 11.1.1.3 - FDM
  
  During the stage of IMPORTATION:
  
  > Download the folder of files
  > Click Browse
  > Select the EXCEL file containing the data source
  Click on IMPORT
  > Receive: failed to import Error Message
  > Error log file opened
  > [UpCheck Function] does not exist.
  
  The excel file contains all data of line-1 records. No header record. Delimited by commas. Import format was defined in order to identify the necessary fields.
  
  Anyone see this error message?

  What format is the file saved Excel in? Is it just a comma-delimited file or you use several sheets and macros in Excel model? We need a little more information.

• Hello, after firefox ubuntu updated (12.0), I can no longer drag tabs to sort, is there a way to activate this function return?

  I have no more information to provide

  Hello, you have the tor-button extension installed in tools > addons > extensions? If so, please remove because it is no longer maintained by the developers & it breaks all drag & drop of the features of firefox 12 upwards...

• There will be a conflict between the two functional modules of a 2010 Biztalk adapter pack?

  Hello

  We already use a free version of SAP Business Suite (32-bit adapter) to suck SAP data.
  We are now upgrading all SSIS packages with the 64-bit Biztalk adapt pack 2010 and have few questions about it. It works successfully.
  Question 1:
  In my direct SAP, I installed the function module and my old 32-bit adapter works. As part of the migration to the new 64-bit adapter, I give myself with new functional module in SAP that I put in the SAP test area. To migrate all my packages, I have to start to move from one card to the other, and both must function in the SAP LIVE system module. If this is the case, will there be conflicts over the 2 functional modules working for 2 different cards (32 & 64 bit)? If my transition period is 4 weeks, these modules can still work?
  Question 2:
  If this works it cause any impact in the production SAP system at all? I don't want daily data extraction to cause an impact at all.
  Please advice. I'm unable to find any relevant article on this.
  Thank you
  Mani
  Original title: biztalk adapt pack 2010

  Hi Vincent,.

  I would have you post your query in the MSDN forums, because it is addressed to an audience of it professionals.

  Your request would be more out there.

  Check out the link-

  http://social.msdn.Microsoft.com/forums/en-us/sqlintegrationservices/threads/

  Get back to us if you have questions about Windows in the future. We will be happy to help you.

  Thank you.

• Toolkit of Real Time Execution Trace functional limitation on targets NI Linux real time taken in charge

  We want to start by using the Toolbox in real-time to backtrace of memory allocation profile on a target of cRIO 9035 & 9039.

  The product information (http://sine.ni.com/nips/cds/view/p/lang/nl/nid/209041) page has a note indicating that the Toolbox has limited functionality on real-time OR-Linux supported targets.

  However, I couldn't find any specific details about what are these limitations.

  If anyone can clarify which restrictions apply?

  Are there alternatives (party packages) that offer a feature more complete?

  Hello Jörn,

  Did some more research, the following limitationrs occur on targets LInux RTOS,

  -The Manager of memory when used on targets of Linux, saves only data for LabVIEW processes and threads, not the global memory of the systems.
  -Wait object are not recorded events
  -Trace buffer size cannot be changed
  -Timed loop pre-emption and reactivation of SRI events are not marked

  Hope that this information helps out you in addition,

  Kind regards

  -Natalia

  Technical sales engineer

• Alternative to the lookup function

  Is there an alternative to the search function? I would like to put the logic below in the formula for a logical column in OBIEE business layer.

  I don't have permission to create a new table in the physical database. I may be able to use Excel as a data source, but I am not sure of this, and in any case it seems a pity to create a table to search for such a small search.

  CASE

  WHEN uni.university_code = 'DOMC' THEN 'CARL '.

  WHEN uni.university_code = 'NOMS-LAKE' THEN 'NOSM.

  WHEN uni.university_code = "NOMS-LAUR" THEN "NOSM.

  WHEN uni.university_code = "LAUR-ALGM" THEN "ALGM".

  WHEN uni.university_code = 'LAUR-HRST' THEN 'HRST.

  Of OTHER uni.university_code

  END

  Ah, may not work if the column contains in its own formula in the column itself, it is a reference in itself and may not work (this is where I'd expect a different type of error).

  In WHICH CASE you must use the original column (I guess it can be 'University Code'), and it will produce the new "reunification", the new values based on the outcome of the CASE WHEN.

  You can choose between "physical mapping from" If you want to push the CASE WHEN your DB and receive a reduction of the number of rows in the result (as grouped by the outcome of the CASE WHEN), or do after aggregation using "from existing columns by using an expression." In this case the DB back you a greater number of lines and the BI server will then work to aggregate together as the CASE WHEN.

  (I would go for the aggregation pre, derived from physical to move less data between DB and BI Server mapping and also not to ask the BI server to do database work together).