Is there a product that allows me to run my xbox kinect on cat5 cable, so that the xbox can be in a different place on television?

Similar Questions

• Is there a chance that the DPS can create an android app?

  I understand the link between Adobe and Apple.  However, the market is swinging in favor of Android for tablets and phones. There should be a way to reach the rest of the world the apps and publications. Might rehash the many discussions in the past on other subjects, but it is not for a show of a horse.

  DPS supports iOS, Android, and Windows 8.1. If you are a professional or business subscriber, you can make apps on all three platforms.

  Note that we support only editing simple apps on iPad. iPhone, Android and Windows 8.1 apps are several questions.

  Neil

• How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed?

  Original title: I need a market to resolve the problem remove the instrument.

  How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.

  I can't know what "all patches" you've tried, but:

  Make sure that the system restore does not monitor the external drive.  SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max.  Make a right click my computer and select properties then the System Restore tab to configure SR.

  Make sure that the Indexing Service is turned off (at least for the external drive).  To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp.  For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc

  There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
  http://safelyremove.com/index.html  Among other features:

  The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.

• Remove the Windows Vista so that the upgrade can continue. He says that I can not upgrade both on the drive.

  I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  Soon, I discovered that I was getting conflict on my computer and he discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

  need an answer as soon as possible... Thank you

  I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  I soon discovered that I was getting conflicts on my computer and discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

  need an answer as soon as possible... Thank you

  Hello

  The best way is to clean install and start over.

  In addition, it is not legal to have both installed version that the license is for a single installation.

  If it is a dual boot with 32 bit and 64 bit installed on different partitions, there would not have been the conflicts you would have never started in one or the other.

  See you soon.

• In javascript, how can I open a dialog so that the user can enter the value of a variable?

  I'm working on a script that will be used for many images, all of them using the same format (size of the image, layout layer, etc.).

  All of these images will have a text layer, and what I want is to have the script modifies the horizontal length of the text layer (horizontal percentage scale), it decreases so that all the text appears on the screen, where there is too much of it.

  But the text may vary from image to image, and what I want is for the script to display a dialog box have been that the user can enter text that will be on the text layer and scaled down.

  Is this possible?

  If you want the user to enter then adjust the text while your script is running, here's a way to do it.

  var typeLayer = activeDocument.activeLayer;
  var type = typeLayer.textItem;
  var t = prompt ("Enter text" , "new text");
  type.contents= t;
  transformLayer();
  
  function transformLayer() {
       try{
       var desc = new ActionDescriptor();
          var ref = new ActionReference();
          ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
      desc.putReference( charIDToTypeID('null'), ref );
      desc.putEnumerated( charIDToTypeID('FTcs'), charIDToTypeID('QCSt'), charIDToTypeID('Qcsa') );
          var desc1 = new ActionDescriptor();
          desc1.putUnitDouble( charIDToTypeID('Hrzn'), charIDToTypeID('#Rlt'), 0.000000 );
          desc1.putUnitDouble( charIDToTypeID('Vrtc'), charIDToTypeID('#Rlt'), 0.000000 );
      desc.putObject( charIDToTypeID('Ofst'), charIDToTypeID('Ofst'), desc1 );
      desc.putUnitDouble( charIDToTypeID('Wdth'), charIDToTypeID('#Prc'), 100 );
      desc.putUnitDouble( charIDToTypeID('Hght'), charIDToTypeID('#Prc'), 100 );
      desc.putBoolean( charIDToTypeID('Lnkd'), true );
      executeAction( charIDToTypeID('Trnf'), desc, DialogModes.ALL );
       }catch(e){}
  };
  

• The server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller.

  Hi all

  Can I confirm with expert from Microsoft, it's windows foundation server 2012 may not be the first domain controller (which means that the first AD in the forest)? It must be attached to the root of the forest as a domain controller. If I'm promoting it to be first DC in new forest, he invites you to "the server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliant check cannot be completed, the server will automatically close in 9 days...

  Thank you & best regards
  Andy

  Hi Andy,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope the helps of information.

• My request is not getting screolled or slide down. Please keep scrollview so that the user can scroll upwards and downwards and view the content.

  My request is not getting screolled or slide down. Please keep scrollview so that the user can scroll upwards and downwards and view the content

  Here is my code that need to be kept scrollview

  
  http://schemas.android.com/apk/res/android"
      android:layout_width="match_parent"
      android:layout_height="match_parent" >
  
      
  
          
  
              
  
              
              
  
              
  
                  
  
                      
  
                      
                  
  
                  
  
                      
  
                      
                      
                  
  
                  
  
              
  
              
  
                  
              
          
      
  
  
  

  I just need the view scrollbar or scroll with which users users can scroll vertically in the App and can see full

  content of the app.

  Solved

• I bought the full version of adobe cc 2015, but it download the free version, you need an application (adobe application Manager) but I have'nt that the app, can you help me?

  I bought the full version of adobe cc 2015, but it download the free version, you need an application (adobe application Manager) but I have'nt that the app, can you help me?

  Hello

  In order to download the creative application of cloud refer:-Creative Cloud help | Creative cloud desktop.

  In case you get an error for the trial, visit:-https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

• Is there a product that can extract DOORS requirements to TestStand so that they do not have to be entered twice?

  Export requirements of DOORS in TestStand and don't allow no changes in condition of TestStand.  All editing must be done in the DOORS and then exported in TestStand.  Is there an application that can bind the two together to respond to this request?

  As already mentioned, there is no tool available that does what you want. The reason is, that manage the requirements with DOORS has an interface standardized, but the description for each test is customized, transition to test description-> test procedure is always personalized as well.

  However, you can create such a tool (or leave some partners to develop a).

  I have to be honest with you: creation of these tools requires good knowledge of the DOORS (or NEITHER requirement Gateway if you use it to extract requirements), TestStand API and a programming language. I suggest the following procedure:

  1 extract the requirements for DOORS (e.g. using NIRG) and create a description of file based to needs. I would use XML.

  2. create a translator of TestStand sequence file. This loads the XML of your temporary file and creates a Sequencefile TS. You will want to define types of step (including code modules) to facilitate the transition. Creation of types of step and Sequence File Translator requires good knowledge of the TS.

  3. create a user interface for TS giving the user the ability to "simply export DOORS to TS test routines. This would include steps 1 and 2 in a request of the end user.

  Please note that especially the second part of step 2 shows why NOR does not provide a standard product for this approach.

  hope this helps,

  Norbert

• Is there a possibility that the Illustrator from adobe update more recent cc 20141 disables the keyboard of my laptop?

  I downloaded the update and all of a sudden I can't work anymore with my keyboard.

  Hi longhollow,

  It is highly unlikely that Illustrator update can cause your keyboard to be extinct. Are you not able to use the keyboard than with the AI or all applications on your laptop can not recognize the keyboard. Are you able to connect to your computer by typing your passwords?

  Sanjay.

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• vcpus most affected that the OS can handle is what effect has on ESX 5?

  I came on 32 vcpus assigned to a windows 2008 storage server vm essentials which I believe is limited by the license to 4 vcpus, there has been, in my opinion, more supplied with 4 sockets of each with 8 cores, by the sys admin not me, what effect it would have on the guest operating system, and host ESX 5? or the two would put the additional vcpus in shutdown? This would allow running slow? ESX would be able to use the remaining 32-4 = 28 vcpus for other virtual machines or could it be hogging these extra vcpus unusable. I can not access esxtop due to restrictions in place, but graphics performance on the cpu of ESX rdy seems out, i.e. instead of weekly 18 000 which means 1 waiting for cpu from what I've read here: VMware KB: conversion between the summation of values CPU and CPU ready % oscillates at the tops of the 30,000 sometimes on other virtual machines Another witness sign, it is that on the other virtual computers Linux invited the "charge" inside the guest is allright on the virtual machines configured with 1 cpu but climbing path because the peaks of 10 for a virtual machine configured with 4 processors. On Windows NAS 2008 itself summons rdy cpu is sky high by weekly graphic example 150,000 to the rush hours and at least 50,000.

  Thanks for any idea.

  Ah, now I get you. Well, you can be sure that Windows uses more than 4 vCPUs. And Yes, my guess is that ESXi always try to plan all of these processors because ESXi is not clear that the processors will never be used. It seems just as inactive. Therefore a drop in performance of hughe.

• Windows XP cannot see that the internet can only see LAN

  We have a small network in my house. My router was set to WEP security (I know its too old, but my windows xp laptop computer does not work with WPA or newer). And I also added mac filtering for more security addresses. This network has worked well for 2 years.

  Meanwhile in a cell phone (that has windows XP sp3) so its wireless network broke, and we couldn't get living, then we just plugged on the router via a cable.

  Recently I had to reset my router because I forgot a password and I could add anything to the mac filter list.

  After that, I put at 'the original' for example WEP + mac filtering (only the passwords have been changed).

  Now everything is working fine, 2 laptops (both Windows 7 a), 2 readers, network all our phones smart etc can connect again, the only laptop (with Windows XP) problem.

  The XP laptop can see LAN (two disks) and router only (ping works), but in any browser (firefox, chrome, iexplorer) give me a Web site cannot loaded in the background: error 105, Err_name_not_resolved.

  I tried names ping (google.com) and different ip addresses (for example my ISP dns server address) but I get no answer 100% packet loss. I tried a lot of things that they did not help

  (1) has tried to change my XP for some fix + fix dns ip (I found these adressis in my router configuration/network configuration)
  (2) then I put back to dynamic ip once again in the line of cmd ipconfig release, ipconfig/reset, etc., I checked all addresses was going well everywhere (I mean gateway, DHCP server, dns server, looked well with dynamic ip too)
  
  (3) then I found similar position
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Networking/cannot-ping-outside-my-local-network/de73a1f9-ef4b-E011-8dfc-68b599b31bf5
  so I tried also what is in the post
  "netsh winsock reset" "netsh int ip reset" then "ipconfig/flushdns" then restart computer

  Nothing helped so I registered here, maybe I answer.

  you might need this information:

  the laptop has Windows XP service pack 3 language _german_
  Cisco EPC2425 router is
  The two networks wdstorage discs + mybookworld... I think they are the two Western Digital stuff. I'm not sure, I can look after if its important (I don't think)
  So, I got two disks still attached. (so 3 connection of the UTP in the router is used, two for disks for the windows XP laptop)

  If something is not clear, ask me please

  
  Thank you for your answer
  Robert

  Hi Robert,.

  Thank you for updating us the status of the case.

  I suggest that temporarily disable you the firewall.

  I recommend you to test name resolution

  A DNS server provides host name resolution. If you cannot connect to a server on the Internet by using its FQDN, there could be a problem with the DNS configuration of your dial-up connection to your ISP or DNS server of your ISP.

  To determine if there is a problem with the DNS configuration of your dial-up to your ISP connection, follow these steps:

  a. at a command prompt, type ipconfig/all, and then press ENTER to display the IP address of your DNS server. If the IP address of your DNS server does not appear, contact your ISP for the IP address of your DNS server.

  (b) to verify that your computer can communicate with your DNS server, ping IP address of your DNS server. The response looks like this:

  Rattling #. ###. ###. # with 32 bytes of data:

  Response to #. ###. ###. #: bytes = 32 time = 77ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 80ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 78ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 79ms TTL = 28

  The series of digital signs (#. #. #. #) represents the IP address of the DNS server.

  If you can't ping the IP address of the DNS server successfully, contact your ISP to verify that you are using the IP address and the DNS server is working properly.
   
  When you have verified the correct IP address of your DNS server, update the settings of your connection to your ISP's dial-up TCP/IP. To change or add a valid IP address for your DNS server for a dial-up Networking phonebook entry, follow these steps:

  a. in Control Panel, double-click network connections.

  b. right click on your Internet connection, click Properties and then click the network tab.

  c. click the Internet Protocol adapter, and then click Properties.

  d. click use the following DNS server address, and then type the correct IP address in the preferred DNS server box.

  e. click OK, and then click OK again.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• It keeps telling me that im running a system that the program can't, how do I know what needs to be changed and how to change?

  How can I find out which system is not supported and how can I change it? It is not expanding on the issue at all

  Hello

  This refers to the OS you're on.

  If you try to install the creative cloud and you get this message, it means that the version of the operating system is not more supported by the software.

  You can also check the system requirements for the creative cloud or any other specific System application requirements. Cloud Creative

  I hope that answers your query!

  In order to upgrade your OS: -.

  For MAC - contact Apple

  For Windows - contact Microsoft

• function work at the same time that the work can also do procedure...

  pls tel me major diff b/w cursor implicit vs explicit cursor and function procedure vs.
  
  Published by: 955345 on August 27, 2012 22:11
  
  Published by: Rousseau on August 28, 2012 11:08

  Rousseau wrote:
  k k bt

  What does that mean?

  function to do some work at the same time that work also can make procedure... Why work

  Function has the ability to be used in SQL, but cannot be a procedure.

  Basically, I use the procedure for transactional operation and function for Non-transactional operation. For example, if I have to update a table I would use a procedure to wrap my update statement. And if I have to do some calculations or run some select and return a result of Ref Cursor I would use a function.

  In addition to the technical restrictions of function and procedure its more the choices make us.