Is there a version of the runtime

Hi all

I have a question and a driving. I work for a new company that has produced basic is a system back-office inventory, logistics and other services. That the system is sold to each customer (a few hundred) put in place and ready to go on a server. The customer plug the server network here and after some light by setting up and entering all the inventory, they are ready to go. We (the upgrade features) in the back-office system, which can be enabled or disabled. One of these is two reports. Currently, these reports are created and executed on JasperReports which we installed on each server. Be Jasper free that we can distribute to provide these reports. I really prefer to be using Coldfusion for reports. The reports are very simple in its design there we have the potential to make very good to add more and better reports revenue but not if we have to pay for a Coldfusion license for every server that we sell to our customers.

So, my question is, is it possible that I can use CF for my report and use some kind of runtime on the servers that will give me the ability to run reports?

Hello

No, I don't think there is a way to use CF in such a way, that it licensed on a per-CPU basis. You can use one of the free versions (Railo etc) but they still need installation and configuration.

The amount of data requires treatment? You can always just use any old PHP or .NET's page on the client to display the data to a Web service on a Server central CF, which processes the data and returns a XML report or similar.

Advantage is that you can centrally manage and upgrade the reporting system, the drawback is that it takes their story out of the House, and that may raise problems of reliability or security.

O.

Tags: ColdFusion

Similar Questions

  • I no longer receive windows updates - there is no any version of the Runtime

    original title: contains no DURATION (2nd revision: I installed another version of AOL.) Since that time I no longer receive windows updates.)

    I installed another version of AOL. Since that time I no longer receive windows updates.  I tried to install the autumatic updates and the "fix it", but my computer does not contain any version of the Runtime.

    Hello


    Put the computer to boot and then look for the Windows updates and see if it helps.

    To help resolve other issues, and error messages you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Note: Follow step 4 to reset the computer to start as usual after the boot process.

    Hope this information helps.

  • Difference between the version of the Runtime and Developer version of LabVIEW.

    What is the LabVIEW Version called the runtime?

    Is this only for the visualization of the screws built in developer version LabVIEW?

    Can't we develop or modify TENS of LabVIEW version screws?

    vaibhavinegi wrote:

    What is the LabVIEW Version called the runtime?

    There is a version of the separate Runtime for each version of LabVIEW.  You can open NI MAX and develop software to see what is installed on your computer.

    Is this only for the visualization of the screws built in developer version LabVIEW?

    Without the development environment, you cannot change screws LabVIEW.  The runtime engine is responsible for actually running the code in order to integrate LabVIEW executables and run them on other machines without the development environment.

    Can't we develop or modify TENS of LabVIEW version screws?

    NO.

  • standard record path with the version of the runtime

    Hallo!

    How can I change the standard economy path on a PC where only the version of the runtime is installed?

    Thank you and have a nice day

    Hilby


  • I have removed Java 7, now I get "unable to find a version of the runtime to run this application.

    I have removed Java 7, now I get "unable to find a version of the runtime to run this application.

    Well Yes, if the application requires Java to run, you have to reinstall Java to get the app runs.

  • "Impossible to find a version of the runtime to run this application."

    I just bought a software Newnovelist 3. When I tried to open it, I learned that I had need of .NET Framework number blabla I downloaded, rebooted computer. Now I get "unable to find a version of the runtime to run this application? What is NOW? I appreciate your wisdom.

    Uninstall the .NET framework and reinstall the latest version.  The error in question is probably the cause of a corrupted installation or download of the .NET framework.

  • Is there a version of the "otwin.exe on-time" program that will run on Windows 7?

    Is there a version of the "otwin.exe on-time" program that will run on windows 7?

    Original title: a program running on windows xp

    It seems that this program was published in 1993 about, so unless the seller, Campbell Services Inc., has released a new version, the answer is probably not.

    He also seems to be a 16-bit program, and as such, it will not work on a 64-bit version of win.

  • is there a version of the ESS with Java 7?

    as we need to use TLS 1.2, is there a version of the ESS with Java 7?

    No, but the supports IBM JDK TLS 1.1 and 1.2 in Service r 10

    IBM SDK, Java Technology Edition, Version 6, Service r 10

    Service update 10 security updates include support for protocols TLS 1.1 and TLS 1.2 and support elliptic curve and the AES - GCM cipher suites.

  • Including the old versions of the runtime of the CVI in one installation program after the upgrade of CVI

    Hello

    I have a computer with CVI 2010SP1 that I recently installed CVI 2012 on.  I've noticed now that every time that I create an installer with CVI 2010SP1 which includes the runtime of the ICB, it's now, including the 2012 CVI runtime engine.  My guess is that this is because the installation program of the ICB 2012 updated modules of fusion in C:\Program Files\Fichiers communs\Merge Modules that it seems like the two versions of the CVI go when building their installers.  My first thought is to some how get a copy of the merge 2010SP1 CVI modules and manually add those to the installer.  Would this work, or there at - it an easier way, I'm missing?  Thank you.

    Hi tstanley,

    Unfortunately for this case as CVI 2010 was made before the install side-by-side feature, it is recommended that if you want to create an application that uses only the CVI 2010 Run Time you will have to downgrade of the CVI Run-Time installation of the development machine (which has some aspects to know as mentioned in the article) or have a separate computer that can be used to create the 2010 CVI based distributions.

  • Remote Debug problem with the Versions of the Runtime CVI.

    Development platform - CVI Version 8.5.1

    Target a 9.4 DAQmx is installed with the runtime of CVI worm: 9.1.0.428

    Developmenrt platform has been recently upgraded to DAQmx 9.4

    Re-installed CVI RTE (ver. 9.1.0.428) on the development platform - even if it was previously installed.

    I get on this error message on the system target "runtime of LabWindows/CVI on the target is newer than your lab Windows/CVI environment.  You need to upgrade the Lab/Windows environment if you want to debug your application. »

    The two systems (development platform & target) have the same versions of CVI RTE and DAQmx.  I did a re - compile full .exe application I am trying to run on the target.  I have re-installed CVI RTE on the development platform.

    What's not here?

    LabWindows/CVI environment is development platform.

    That is: you must either downgrade the runtime on your target to match the existing 8.5.1 machine debugging or level CVI installation on the development computer to match the 9.1 on the target (if I am not mistaken 9.1 mean CVI 2009 SP1). Both machines must have the same version or debugging of the machine must be newer than the target.

  • Is there a version of the Intel to HP Photosmart software menu like Lion will not support existing software

    This version of the Hp Photsmart Menu is Power Pc Version and Lion will not support this type of software.

    I down loaded the latest drivers, and there is no change in the type of process, as that displayed in the activity monitor. I am currently Mac OS 10.6.8. It's still a Rosetta Apps, as stated in this article —-the-right-way/103130?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+cultofmac%2FbFow+%28Cult+of+Mac%29 http://www.cultofmac.com/how-to-prepare-your-mac-for-lion-

    After installation of Lion, all products worked and HP also had an update today.

  • Why is there no version of the retina of the Adobe Content Viewer.

    Can I put in a request for Adobe create a version of the retina (HD) of the content viewer Adobe please?

    It's not supposed to test pages in an environment that shows that 1024 x 768 rendtions on an iPad to the retina.

    Any ideas? Thoughts?

    Thank you

    David

    Adobe Content Viewer displays HD folios and is an application of the retina. How are you trying to test your folio? If you use the Preview on the functionality of the device, be sure to select your interpretation of folio of retina in Panel of Folio Builder and preview from here. If preview you the Folio overlays panel we do not know what size you want and default to SD.

    Neil

  • Version of the Runtime Version vs LV LV for the needs of NEITHER-SCOPE

    Hello

    I use the PCI-5112. When I look at the material to the MAX he said something like "Using old version.

    I want to upgrade to the latest version, but I'm confused about the requirements for the different versions of NOR-SCOPE.

    For example, in MAX, under the software, I have:

    LV 8.2

    LV DURATION 8.2.1

    LV DURATION 8.0.1

    LV Runtime 7.1

    And for example the version 3.6 OR-scope: http://joule.ni.com/nidu/cds/view/p/id/1492/lang/en

    They say Labview 8.2.1

    Now since I have 8.2 and 8.2.1 runtime would be fine?

    Well, I noticed a difference. On the old computer which has the material for versions of NOR-SCOPE, he says:

    OR-SCOPE (IVI) - 3.4.0f3

    OR SCOPE Soft Front Panel - 2.8

    However, on the new machine, I installed NO-SCOPE 3.8.7 and I:

    OR SCOPE TIME - 3.87

    OR SCOPE Soft Front Panel - 3.8

    That seems much more reasonable, since they are the two 3.8. A reason why on the old computer, there is this difference?

    Thanks for the help. See you soon.

    Hi AFolly,

    I checked with Setup for NO-Scope 3.4 and it includes Soft Front Panel version 8.2.1, so what is expected. However, I believe that you must have LabVIEW version 8.2.1 to support properly the version 3.6 OR-scope.

    Best regards

  • Which version of the runtime DAQmx is compatible with DAQmx 8.8?

    I'm going to build an installer using Visual C++ and I wanted to include the DAQmx run-time, rather than the complete installation.  I built the application using DAQmx 8.8 but, I do not see a time of execution of this version.  I see that time for 8.9 and 8.7.1.  Time of execution is compatible with 8.8?

    Thank you

    Hey,.

    I just very well with the 8.9 DAQmx run-time. Here is the link to download.

    Thank you

    nAyer

  • When I run the fix on Microsoft fix the site, it says "unable to find a version of the runtime to run this application. How can I get the runtime?

    https://SkyDrive.live.com/redir.aspx?CID=d7389b68b3a275ad&RESID=D7389B68B3A275AD! 120 & Thierry = root

    a link to my disc of sky with the cleaning tool that I use.

    Took me 35 minutes to download the four files on the disc of sky so it is an estimate on what it will take to download. Save to your desktop, and then use the cleaning tool.

    post to when.

    I used your cleaning tool and then installed NET Framework 2.0. FixIt has run and it worked. Updates work now. It took a lot of time to fix this and I couldn't have done it without your help. Thank you very much!

Maybe you are looking for