BlackBerry Smartphones that I messed up while creating a Blackberry...

Similar Questions

• BlackBerry Smartphones that I messed up my settings

  I tried to install 'Yahoo Go' on my Curve 8310.

  The installation failed because he said he needed the access permissions (I think)

  Anyway, it opens a window of the application and I changed all the settings "allow."

  This still does not work and I deleted the Yahoo Go app, but now I have no connectivity

  with the internet.  Help!

  Hello

  Well, it seems that we have to touch ALL the bases on this one!

  Use the following as a troubleshooting guide.

  Let us know how it goes!

  Thank you

  Bifocals

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB11678&sliceId=1&docTy...

• BlackBerry Smartphones that I messed up... How should I do?

  Hello

  I usually transfer photos to and from my Blackberry using the cable supplied with the BB. The second I connect, I get a msg on my phone screen asking if I want to continue with the operation (or something like that) then I click 'Yes' and put my device password so that I can transfer photos... etc. By mistake, the other day I clicked 'NO' and 'no longer show this msg again' and now whenever I connect my device to my laptop I do not get this msg on my phone more and I can't transfer anything! I don't have the Blackberry disc for installation.

  How can I solve this problem and be able to transfer to reuse the cord of BB?

  My Blackberry Curve 8520 model is

  Thank you!

  Hi and welcome to the Forums!

  On your BB, go here:

  • Home screen > Options > memory

  Reset the Mode mass storage setting what it is likely shows now like 'never '.

  Good luck!

• BlackBerry SmartPhones that Support Themes

  Hello, I made a theme and made compatible with these BlackBerry SmartPhones:-1) "BOLD" 2) BOLD 9700) 3 BOLD 9650 9000 4) TORCH 9800 5) curve 6) CURVE 9300 8950 7) of the CURVE 8900 8) CURVE 8500 9) CURVE 8350 10) CURVE 8330) 11 TOUR 9600) 12 PEARL 9100) 13 STORM 9500 14) STYLE 9670 15) in PEARL 8100 16) PEARL Flip 8200 17) CURVE 8300 Series 18) 8800 I just wanted know there there any BlackBerry smartphones that support Themes? Thankx

  Basically in this link of the number model 8000 and higher, but not those of the OS 7.0 or higher.

  http://en.Wikipedia.org/wiki/List_of_BlackBerry_products#Consumer_models_.288000_-_9000_series.29

• Services/applications for blackBerry Smartphones that I deleted back on reboot

  I rebooted just my camera, after that I had to reinstall BBM (that is another story), and I found that many services/applications that were on the device when I bought it I deleted are back. Desktop software takes no notice of them, so I think these services are on my SIM card and are loaded on every time I reload my camera.

  However, if I reboot my device after a prompt of the App World app, they don't come back, so there's obviously a few conflicts between the reboots after guests in the App World app, where such services do not return, and that it recharges after the guests of the device, where they come back.

  My question is: short to go to my nearest store of O2 and talk to them, is there a way I can permanently delete these services/applications, or prevent back?

  Services/apps that I mention are:
  Gameloft, who sends me to a website via WAP (which turns out to be retained; Gameloft is where buy you games for your mobile O2, so why I think that these services/applications are created on the SIM card)
  AIM, download Yahoo! Messenger, Google Talk, MySpace and WLM, which are links to their respective download pages, only those links have their own individual icons.

  Hi and welcome to the Forums!

  These icons are shortcuts 'teasers' pushed to you by your carrier. You can't really get rid of those nor can prevent you re-fill (if you check your contract in detail, I'll be there is some small print allowing your carrier to push them to you). On the contrary, what I do is to create a homescreen folder called "Alternative icons" (some call it "Junk") and to settle all these icons. In this way, they are out of the way.

  Good luck!

• Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.»

  Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.» All solutions? CPP, Volume Shadow Copy Stallion are started.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.

• How to create multiple thumbnail images while creating the Image assets

  Hi all!

  
  

  I have a requirement to create several thumbnail images (of different sizes), while creating new assets of image. These vignettes must be associated with different attributes after the recording of assets. I thought you used miniature filter, but I read that it uses a library of swing, it's very very inefficient memory-wise and we can experience the memory leak and crashes with only a very limited number of images... Another solution is to set up the filter citing ImageMagick with a system exec: it's fast, it does not have the memory and it also generates a much greater quality of thumbnail image resizer that comes with swing.

  
  

  What do you think, and how can I implement this?

  
  

  Thank you very much!
  

  Hello Elena,

  We noticed some performance issues in our current client, so we changed the miniature filter by default:

  A temporary file is no longer used for the input image. The source image is used directly, because it is not changed by the thumbnail generator.

  This avoids some performance issues, we have detected. First of all, because of the way the image has been copied (a byte is read and written each time), and second, because of some file systems environments run badly.

  In addition, it relies on "deleteOnExit", which can produce an impact on the performance of the application server, as the JAVA virtual machine must maintain a list of files to delete when leaving, and which consumes memory. It is even more problematic on servers that are not restarted very often.  And if at the end the application server is not normally off, these files would not be removed.

  On the other hand it seems that the thumbnail generator is not necessary that the image source file ends with the extension of the right.

  Now we use the provided source image directly, it's a ".tmp" instead of a file (for example) the file ".gif".

  It will be useful,

  Gerardo

• I got a prob while creating a link/link between two tables in a jdeveloper11g

  Hi guys...

  I got a prob while creating a link/link between two tables in a jdeveloper11g, help me.

  I use two table employee, Department.

  Unfortunately there is no primary key and foreign key in these tables.now i updated on those of table structure.

  I want to create a form like it should be a link between the Department data, i.e. data and employee while the Department is changed then only present corresponding employees in this block...

  Table structure as follows

  Employee:

  -------------------

  employe_id,

  name,

  Department,

  GR,

  Date of birth

  Department of justice

  Department:

  --------------------

  department_id,

  department_name;

  Note: in the employee department table is the same as in the department table department_id...

  So, you want to build master / detail between Department & sub_departments?

  In the same way, create a new, yet another link between departments & sub_departments, so that the connection is:

  Department.Department_Id = sub_departments.department_id

• How uncheck you a checkbox to the radio while CREATING a form?

  There are a lot of discussions about how to disable a checkbox radio on a form to fill out, but what about when the form was created? I get 2 phone numbers in my form and I need the customer to check their main phone number. So I really need a box of the radio. While creating the form in Acrobat, I hit preview to make sure that everything is going well and when I test the check radio boxes, one of them is activated and I can't cancel it. I don't want a default checked telephone numbers, but rather wish both uncontrolled until the client fills out the form. How can I get rid of this preview control?

  Yes, it will certainly work as you want with check boxes. As mentioned, the key is to give them the same name, but different value of exports (for example, Yes, no). You set the value to export on the Options tab of the field properties dialog box.

  To reset a form in Acrobat 9, select "forms > clear form.

• options of workflow while creating the new project type

  Hey Dina,
  
  I have a doubt on below 2 options that are available in the "Project status, Workflow" tab while creating a new project type.
  
  Activate the workflow for projects
  Activate the workflow for Budgets
  
  Could you explain what what will be the exact flow of two work above, impact if we allow them when creating new project type.
  
  Thanks in advance,
  RPD

  Hello

  These two options will affect any new project created using the type of project you are developing.
  For example, you create a project type called "Capital Construction Projects", designated for individual projects that will be created when your company began construction of a new factory or office, for its own operations.
  For this type of project, you can enable the flow of project work and budgets.

  Later business user creates a new project of this type, for the construction of offices for a new Department, he or she will submit the project for approval. By using the workflow your company would install rules so that system knows which should be the approver of this creation of project, or later, any change in the status of the project.
  Once that project was created the business user need to budget for the expected costs of this investment. Another workflow is now used to submit the budget for approval.

  If unnecessary business rules a formal process for approval of two state changes of project or the base line of the budget of the project, then you need not enable these options for the type of project.

  Dina

• Spatial index error while creating an index for a column GeoRaster

  Hi all
  
  Several months ago, I inserted 12 map PNG Raster files in Oracle as GeoRaster data. I then looked into MapBuilder to verify that they have been charged, and as they appear, it seems to suggest that they were.
  
  Today, however, I realized that I had not created an entry for USER_SDO_GEOM_METADATA or a spatial index. That's why I tried to do it by using the code below. When I made an entry in USER_SDO_GEOM_METADATA, I didn't add .spatialextent after the column name, web_raster_map. But while reading the manual MapViewer I decided that it was necessary to create a new entry. However, the error message displayed at the end, was the same in each case. If anyone has any ideas on what I can hurt, I would be grateful.
  
  Is the entries abscissa-x and the ordered is wrong? Should this be X and Y, and if that resolves the errors? I've been using a script I created previously to vector data and adapting.
  

  INSERT INTO USER_SDO_GEOM_METADATA
  (TABLE_NAME,
  COLUMN_NAME,
  DIMINFO,
  SRID)
  VALUES (
  'WEB_RASTER_MAP_FILE',
  'web_raster_map.spatialextent',
  SDO_DIM_ARRAY( -- full grid size goes here
  SDO_DIM_ELEMENT('eastings-x', -3273.58473839662, -8471.66, 0.005),
  SDO_DIM_ELEMENT('northings-y', -9694.76, -1632.88473839662, 0.005)),
  96163497); -- this is a user created srid
  commit;
  
  CREATE INDEX WEB_RASTER_MAP_FILE_IDX ON WEB_RASTER_MAP_FILE (web_raster_map)
     INDEXTYPE IS MDSYS.SPATIAL_INDEX;
  commit;

  Error message was:

  Error starting at line 14 in command:
  CREATE INDEX WEB_RASTER_MAP_FILE_IDX ON WEB_RASTER_MAP_FILE (web_raster_map)
     INDEXTYPE IS MDSYS.SPATIAL_INDEX
  Error at Command Line:14 Column:13
  Error report:
  SQL Error: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
  ORA-13200: internal error [Unsupported Type] in spatial indexing.
  ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
  29855. 00000 -  "error occurred in the execution of ODCIINDEXCREATE routine"
  *Cause:    Failed to successfully execute the ODCIIndexCreate routine.
  *Action:   Check to see if the routine has been coded correctly.
  commit succeeded.

  Kind regards
  
  Tim
  
  Published by: user467357 on March 23, 2009 17:45
  To add an additional comment.

  Tim,
  You must create the index on web_raster_map.spatialextent.
  The create index must therefore:

  CREATE the INDEX WEB_RASTER_MAP_FILE_IDX ON WEB_RASTER_MAP_FILE (web_raster_map.spatial_extent)
  INDEXTYPE IS MDSYS. SPATIAL_INDEX;

• While creating a slide show with pictures, can you assign music to a specific set of photos? I would use 5 different pieces of music for every 5 parts of my slide show.

  While creating a slide show with pictures, can you assign music to a specific set of photos? I would use 5 different pieces of music for every 5 parts of my slide show.

  

  No, you can't.  One solution is to create 5 different slideshows and export them to the office where you can bring together them in a single quicktime movie file and use it.

  If you have a copy of iMovie 6 HD, it can be hacked to work with El Capitan. With it you can assign exactly music groups of slides in the slide show:

  

  

• I want the programming palette appear everytime that I click right while in the block diagram

  I want the programming palette appear everytime that I click right while in the block diagram.  Right now I have to look at the dialog box Express, down arrow and then click programming.  I want the programming to bring up the first.  This should be very simple, but for some reason, I don't see the solution in help.

  go to tools...options...controls/functions... formatting palette

  Select "Icons only" and "category (standard)".

  Now make a right click and PIN the palette to get the button "Customize". Select 'change visible pallets... '. ' and click 'select all '.

  see if it's better.

• Wireless printer Lexmark X 4850 and a netgear router that does not connect while I can print

  Rookie PC user...

  I have a Lexmark X 4850 wireless printer and a netgear router that does not connect while I can print ggggrrrr....!
  I checked all plugs and connections, the reboot several times and am about to throw it out the window... Help!

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like the wireless Lexmark X 4850 printer is not to connect to the wireless router.

  Visit this link that should help you with this problem.

  http://support.Lexmark.com/index?page=content&ID=FA697&locale=en&UserLocale=en

  Note: Using third-party software or the link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software, or the link is at your own risk.

  If this fails to resolve the problem, visit this link and read "need help?"

  http://www1.Lexmark.com/us/en/view/printers%20&%20MultiFunction/Lexmark-X4850/CATID=cat170005-category&prodId=4145-product

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• recently, I ran a program that has messed up my settings for the taskbar! now, any program or folder I use shows a small button mini that you cannot read even if someone can help thanks to

  recently, I ran a program that has messed up my settings for the taskbar! now, any program or folder I use shows a small button bar mini tasks that you do not know still can anyone help thank s that it is just a program minimized, I used to be able to read the content now, it is not big enough for an icon

  Hello

  You can check this link:

  Description of the Option "the of the Group similar taskbar buttons".

  http://support.Microsoft.com/kb/281629