Is there a way to clear or remove actions in a script?

Similar Questions

• have 8 GB of ram, but seems like all cached then run IE9 makes so slowly. Is there a way to clear the cache

  have hp computer with 8 GB of RAM running on vista 64-bit and see lately all put physical memory cached in the Manager of tasks with almost no free left.

  is there a way to clear the cache?

  Thanks in advance

  The value specified in the 'Cache' in the Task Manager includes more than the real system file cache. In particular, it includes the pending list. There are programs and files that have been previously referenced and the Windows file previously read. The waiting list pages can be reused immediately if an application requires more memory. There is an article with the definitions of the terms used and an introduction to the management of memory here:

  http://blogs.msdn.com/b/ntdebugging/archive/2007/10/10/the-memory-shell-game.aspx

  To see your use of memory more in detail, download and run Process Explorer from here:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  Go to view > system information. (or Ctrl + i). Select the memory tab and view the information in the left column under Commit Charge and physical memory.

  To better answer your question, please provide the following details.

  • Describe in more detail what you mean by Internet Explorer is slow.
  • Being of other applications of runs slowly or only Internet Explorer?
  • How many tabs you have open and how many other applications is running when Internet Explorer is running slowly?
  • You are running Internet Explorer 32-bit or 64-bit? See this article to know that if you do not know: http://blogs.msdn.com/b/ieinternals/archive/2009/05/29/q-a-64-bit-internet-explorer.aspx
  • In tools > Internet Options > advanced, which is the scene of "use the software instead of rendering GPU rendering?

• is there a way to clear the fax log?

  Is there a way to delete / remove the fax log?

  Hello

  To my previous quote the second method must have erased the log of faxes do not know why it does not clear.
  Try following these steps to reset.

  Reset partial:

  1. make sure that the unit is ON. Now, unplug the power cable from the device.

  2. press and hold # and 3 while plugging in the power cord

  3 release the buttons when the product control panel indicates "partial Zero".

  Sometimes the printer turns off by itself, you can release the button and use the power button

  Turn the DEVICE, it now reads "Partial reset" and follow the instructions to set up

  Note: To perform this reset the power cable must be unplugged and plugged it back as needed.

  Reset of semi-complete

  1. turn on the printer and then unplug the power cable from the device.

  2. press and hold # and 6 while plugging in the power cord

  3 release the buttons when the product control panel indicates "semi-Full reset". The product is now reset.
  Sometimes the printer turns off by itself, you can release the button and use the power button

  turn ON the device, it now reads "semi-Full reset" and follow the instructions to configure.

  Note: This step erases some of the setting that you have saved are the following:

  -All default menu settings

  -All default phone setting values
  -Learn some country and language of the user interface
  -Clear fax memory
  -Clear fax log information
  -Clear all the speed dials/mailing lists
  -Personal clear header information

  If my post has solved your problem, please mark as, as accepted Solution

  +++ Say thank you by clicking on the star of congratulations in the post.

  Although I am an employee of HP, I speak for myself and not for HP.

• Accidentally, I bought a software that says it is compatible with Windows 95 or 3.1. I have Windows XP on my computer. Is there a way to make it compatible? (It says Script error when I try to use the program). Thank you!

  My program is saying "Error in Script" when I try to use this software.  It is supposed to be used with Windows 95 or Windows 3.1.  Is there a way to make this compatible software?  Thank you!

  It would be unusual for a real program designed for Win95 or Win 3.1 be provided on a cd, they would normally have been on a diskette

• Is there a way to stretch the key/action images?

  So I've created an animation with a guy swing his left arm back. The problem is that his arm is swinging too quickly. Is there a way I can extend the whole action, rather than delete all keyframes and redo it?

  Thank you!

  You should be able to click down and drag the keyframes to the bottom of the timelime to spread them out.  In addition, you should be able to insert images between keyframes (select images between-> right click-> Frames selection insert).

• Redirect virus picked up my firefox, is there a way yo block or remove it?

  He captures apparently random times and sent me to websites of recipes.

  I tried to find the host based on records, tried to get a recently installed program, firefox addons/plugins windows defender/hitman pro.

  Nothing there so far, the redirection of malware page is:

  http://engine.PHN.doublepimp.com/link.engine?GUID=88ca85df-d43d-4f64-bc7d-ebc1818e3703

  He sends me in several recipes by access the site and link sites http://www.reimageplus.com and porn with girls very ugly.

  This is a clean windows 10 installation of 2 weeks ago but still, knowing that something I installed recently was delivered with a virus is not me providing no leads so far, hoping someone can help.

  Hi, you can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • ESET Online Scanner

  Note that not all programs removal allows to detect all malware, you may need to run multiple or all of them.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us! Thank you.

• Is there a way to clear all event listeners, to stop all the video clips, etc.?

  Is there a syntax for that?

  I have a movie that has 15 images. Each image has integrated video clips in video clips, tons of entertainment and event listeners. None is needed except when they are on the scene, on the frame. However, the animations continue even when the frame is left.

  For example, I have a framework that shows a rendered animation dynamically the leaves that fall from the tree. When the frame is left, the leaves continue to decline.

  There are many cases of this kind of thing happens.

  
  Ideally, I'd like to just be able to erase everything when a new image is loaded, since no animations or postponed event from one image to the other listeners.

  
  Is it possible to do it without the thousands of lines of code it would take to manually remove all single animation and event listener and sounds, etc., of the scene?

  Thank you very much!

  Amber

  You must do it manually.

  or, you can convert each image into a swf file.  load each swf when necessary and, if you're publishing to fp 10 +, you can apply unloadAndStop() to kill all the flows in the SWF loaded and ready these assets to gc.

• . Is blackBerry smartphones there a way to clear the calendar?

  Is it possible for me to clear my calendar from my device only?

  You can clear your calendar using Desktop Manager backup/restore utility.  In the select backupDesktop Manager, then click the [Advanced] button.  On the right side a list of data sources appears, including your calendar data.  Select only this line, and then click the [Clear] button.

  Note If you have more than one calendar on your device, I think this will delete all the.

  If the calendar is grayed out, it means that it is configured for wireless (BES) synchronization.  Go to the calendar, then click on the [Menu] button and select Options.  If you have the OS 4.5 or higher, select each calendar and press [Enter]and attributed tothe wireless sync .  This will simply under Options in earlier versions.

• is there a way to clean up (remove) the queue of a specific event structure?

  It is a simple question. Please tell me Yes or no.

  Thank you very much.

  hookso wrote:

  It is a simple question. Please tell me Yes or no.

  Thank you very much.

  For staticically regesitered of events, I know of no method worth the look.

  For dynamic events I would experience no logs the event to see if it destroys the events in queue.

  Ben

• Is there a way to get the ImageReady Actions in PS CS4?

  Recently, I made the leap from cs2 to cs4 and I miss ImageReady.  I know that the animation in integrated in CS4 but the cool that I liked so much... zoom in, zoom out equity and spinning and other.  Where can I find actions like to use CS4 animations?... y at - it a way to get them from ImageReady and install them in CS4?

  Thank you

  Rick.

  I don't know that I'll have more questions in the near future

  I don't think that there is a way. IR actions were never compatible with PS even at the time.

  Mylenium

• Is there a way to prevent the continued actions?

  I have interactivity built into my slide that involves the user making a good amount of click. (The majority of them is ' increment $$variable$ $ by X ").

  But he keeps continues each time clicks learning which means that they move to the next slide until they are ready.

  I've already shifted the time "to pause after" so that the learner can do more than a few clicks before they resume, but ideally I want the learner to stay on the blade until they choose to pass or get the correct question.

  Any suggestions welcome!

  Thank you

  M

  P.S. I use 8 Captivate

  Maybe this post (there's also a link to a Youtube tutorial) may specify:

  Why choose Standard Simple action? -Captivate Blog

  Although this was written for COP6, everything is also valid for CP8

• Re: Is there a way I can clear my virtual memory

  :) Hello world!

  I am new to this Web site and a bit of a novice, but I hope someone can help me.

  Is there a way I can clear my virtual memory?

  I was told that I may need to buy more memory that my laptop is running slowly. I did a complete system restore "not the one that takes you to a restore point" that I had to download all my software on my system. I did what I was advised to do, such as Defrag, delete all temporary Internet files and so on.

  Warm greetings and thanks in advance.

  mikevee

  What? Virtual memory?
  Do you mean the pagefile?
  Virtual memory is known as a page file or a swap file. Windows applications and use this file on the disk (default C:\pagefile.sys) in addition to physical memory (RAM) required.

  I use the CCLeaner. This tool is free and is cleans and removes some temporally files from the HARD drive. It s nice

• I would like to know if there is a way to clear my recent documents at once instead of one at a time please.

  is there a way to empty the recent documents at once instead of one at a time?

  Krissy,

  Thanks for your post.

  To clear the contents of the my recent Documents folder

  To clear the My recent Documents list, follow these steps:

  1.	Click Start , and then click Properties . Or, if the Start menu is already displayed, right-click an area void of the Start menu and then click Properties .
  2.	Click Customize .
  3.	Click the Advanced tab.
  4.	Under recent documents , click clear list , click OK and then click OK . Most recently used documents are removed from the my recent Documents folder. Note that this action does not delete the documents from your hard drive.

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a way I can remove the mouse from the entire project all at once, rather than a framework at a time?

  I have a big event with the movement of the mouse on the many frameworks. My client may decide not to see the movement of the mouse. Is there a way I can remove the mouse from the entire project all at once, or what I should do a frame at a time?

  -Stuart

  Hello

  Click any slide in the Panel of the film. Press Ctrl + A to select all slides. Right click on one of the blades and the point with the mouse context menu, and then clear the check box next to "show the mouse."

  See you soon... Rick

• Is there a way to remove data from a combination of individual Member?

  Hello
  
  Is there a way to remove data from a combination of members particlular, as if I want data for the month of sales for the month of May to remove and keep the rest how to do?
  
  Thank you.

  You don't mention if this is a cube ASO or BSO and which version you're on. If OSI, then a script to calc using a fix to erase the part of the data is what you want. There are references to him by the other prople. If it's an ASO cube, then you use a MaxL command with MDX syntax to make clear assuming you're on version 11.1.1.X or superior. If you are on a lower version, it becomes more complicated.